TY  - JOUR
A1  - Naujokat, Anke
T1  - Ut rhetorica architectura – Leon Battista Alberti´s Technique of Architectural Collage / Leon Battista Albertis architektonische Collagetechnik
JF  - Candide : journal for architectural knowledge. 2 (2010)
Y1  - 2010
SN  - 1869-6465
N1  - gedruckt in der Bereichsbibliothek Bayernallee : Signatur 13 Z 939 vorhanden
SP  - 73
EP  - 100
ER  - 
TY  - JOUR
A1  - Garhofer, Gerhard
A1  - Bek, Toke
A1  - Boehm, Andreas G.
A1  - Gherghel, Doina
A1  - Grundwald, Juan
A1  - Jeppesen, Peter
A1  - Kergoat, Hélène
A1  - Kotliar, Konstantin
A1  - Lanzl, Ines
A1  - Lovasik, John V.
A1  - Nagel, Edgar
A1  - Vilser, Walthard
A1  - Orgul, Selim
A1  - Schmetterer, Leopold
T1  - Use of the retinal vessel analyzer in ocular blood flow research
JF  - Acta Ophthalmol
N2  - The present article describes a standard instrument for the continuous online determination of retinal vessel diameters, the commercially available retinal vessel analyzer. This report is intended to provide informed guidelines for measuring ocular blood flow with this system. The report describes the principles underlying the method and the instruments currently available, and discusses clinical protocol and the specific parameters measured by the system. Unresolved questions and the possible limitations of the technique are also discussed.
Y1  - 2010
U6  - http://dx.doi.org/10.1111/j.1755-3768.2009.01587.x
SN  - 1755-3768
VL  - 88
IS  - 7
SP  - 717
EP  - 722
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Maki, Rafael M.
A1  - Paulovich, Fernando V.
A1  - Werner, Frederik
A1  - Poghossian, Arshak
A1  - Oliveira, Maria C. F. de
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Use of Information Visualization Methods Eliminating Cross Talk in Multiple Sensing Units Investigated for a Light-Addressable Potentiometric Sensor
JF  - Analytical Chemistry  (2010)
Y1  - 2010
SN  - 0003-2700
SP  - 61
EP  - 65
ER  - 
TY  - JOUR
A1  - Akimbekov, N. Sh.
A1  - Zhubanova, A. A.
A1  - Mansurov, Z. A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Use of Carbonized Rise Shell for the local treatment of wounds
JF  - Eurasian ChemTech Journal
N2  - On the model of musculocutaneous wound in rats, the effect of applicative sorption by carbonized rise shell (CRS) on the healing of festering wound was studied. It has been shown, that cytological changes end with rapid scar formation. The use of CRS at the period of severe purulent wound contributes to its favorable course, prevents the development of complications of the animals from sepsis.
Y1  - 2010
U6  - http://dx.doi.org/10.18321/ectj35
SN  - 2522-4867
VL  - 12
IS  - 2
SP  - 133
EP  - 138
PB  - Institute of Combustion Problems
CY  - Almaty
ER  - 
TY  - JOUR
A1  - Haselgruber, Nikolaus
A1  - Mautner, Karin
A1  - Thiele, Jan
T1  - Usage Space Analysis for Reliability Testing
JF  - Quality and Reliability Engineering International
N2  - During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.
Y1  - 2010
U6  - http://dx.doi.org/10.1002/qre.1155
SN  - 1099-1638
N1  - Special Issue: Business and Industrial Statistics: Developments and Industrial Practices in Quality and Reliability
VL  - 26
IS  - 8
SP  - 877
EP  - 885
PB  - Wiley
CY  - New York
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
A1  - Kleinertz, Caroline
T1  - Urlaub, Feiertage und Krankheit - Kurzarbeit in Vollzug
JF  - Arbeit und Arbeitsrecht : AuA
Y1  - 2010
SN  - 0323-4568
IS  - 6
SP  - 348
EP  - 351
PB  - Huss Medien
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Reindl, Lukas
T1  - Untersuchung der Eignung von Ankerschienensystemen unter Erdbebeneinwirkungen
T2  - Conference proceedings / ANSYS Conference & 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS
Y1  - 2010
SN  - 3-937523-07-3
SP  - Dokument 2.11.1
PB  - CADFEM [u.a.]
CY  - Grafing
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - http://dx.doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
JF  - Structural safety
N2  - This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.strusafe.2010.06.001
SN  - 0167-4730
VL  - 32
IS  - 6
SP  - 402
EP  - 410
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Walter, Michael
A1  - Gligorevic, Snjezana
A1  - Detert, Thorben
A1  - Schnell, Michael
T1  - UHF/VHF air-to-air propagation measurements
T2  - Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain
Y1  - 2010
SN  - 978-1-4244-6431-9 ; 978-84-7653-472-4
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Barbazán, Paula
A1  - Hagenbach, Adelheid
A1  - Paulßen, Elisabeth
A1  - Abram, Ulrich
A1  - Carballo, Rosa
A1  - Rodriguez-Hermida, Sabina
A1  - Vázquez-López, Ezequiel M.
T1  - Tricarbonyl Rhenium(I) and Technetium(I) Complexes with Hydrazones Derived from 4,5-Diazafluoren-9-one and 1,10-Phenanthroline-5,6-dione
JF  - European Journal of Inorganic Chemistry
N2  - Tricarbonylrhenium(I) and -technetium(I) halide (halide = Cl and Br) complexes of ligands derived from 4,5-diazafluoren-9-one (df) and 1,10-phenanthroline-5,6-dione (phen) derivatives of benzoic and 2-hydroxybenzoic acid hydrazides have been prepared. The complexes have been characterized by elemental analysis, MS, IR, 1H NMR and absorption and emission UV/Vis spectroscopic methods. The metal centres (ReI and TcI) are coordinated through the nitrogen imine atoms and establish five-membered chelate rings, whereas the hydrazone groups stand uncoordinated. The 1H NMR spectra suggest the same behaviour in solution on the basis of only marginal variations in the chemical shifts of the hydrazine protons.
Y1  - 2010
U6  - http://dx.doi.org/10.1002/ejic.201000522
SN  - 1099-0682
IS  - 29
SP  - 4622
EP  - 4630
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Esch, Thomas
T1  - Trends in der Nutzfahrzeugantriebstechnik
JF  - Motortechnische Zeitschrift (MTZ)
Y1  - 2010
SN  - 0024-8525
U6  - http://dx.doi.org/10.1007/bf03225608
VL  - 71
IS  - 10
SP  - 652
EP  - 658
PB  - Springer Nature
CY  - Basel
ER  - 
TY  - JOUR
A1  - Esch, Thomas
T1  - Trends in commercial vehicle powertrains
JF  - ATZautotechnology
N2  - Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.
KW  - European Transient Cycle
KW  - Common Rail Injection System
KW  - Commercial Vehicle
KW  - Selective Catalytic Reduction
KW  - Diesel Engine
Y1  - 2010
U6  - http://dx.doi.org/10.1007/BF03247185
SN  - 2192-886X
VL  - 2010
IS  - 10
SP  - 26
EP  - 31
PB  - Vieweg & Sohn
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Seibler, Jost
A1  - Schwenk, Frieder
T1  - Transgenic RNAi Applications in the Mouse
T2  - Methods in Enzymology : Guide to Techniques in Mouse Development, Part B: Mouse Molecular Genetics. 2nd Edition
Y1  - 2010
SN  - 978-0-12-384880-2
N1  - Methods in Enzymology : Vol. 477
SP  - 367
EP  - 386
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Berretz, F.
A1  - Skorupa, S.
A1  - Sander, Volker
A1  - Belloum, A.
T1  - Towards an actor-driven workflow management system for grids
JF  - International Symposium on Collaborative Technologies and Systems (CTS), 2010 : 17 - 21 May 2010, Chicago, Illinois, USA / IEEE
Y1  - 2010
SN  - 978-1-4244-6619-1
SP  - 611
EP  - 616
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - JOUR
A1  - Hirschfeld, J. A.
A1  - Lustfeld, H.
A1  - Reißel, Martin
A1  - Steffen, B.
T1  - Tomographic diagnostics of current distributions in a fuel cell stack
JF  - International Journal of Energy Research
Y1  - 2010
SN  - 0363-907X
VL  - 34
IS  - 3
SP  - 284
EP  - 292
ER  - 
TY  - BOOK
A1  - Matcha, Heike
T1  - Therme mit Gästehaus : Masterentwurf WS 2009/2010
Y1  - 2010
SN  - 978-3-88536-115-2
PB  - Technische Universität Darmstadt
CY  - Darmstadt
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  -