TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Simulation des Tropfenübergangs beim MSG-Impulslichtbogenschweißen
T2  - Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vorträge der Veranstaltung in Hamburg
Y1  - 2011
SN  - 978-3-87155-267-0
SP  - 554
EP  - 559
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Leidinger, R.
A1  - Wollert, Jörg
T1  - Simplified rapid-prototyping with automation technology
T2  - Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings
Y1  - 2010
SN  - 978-963-9058-29-3
SP  - F2010C093
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Sicherheit und Sicherheitslücken in kabellosen Automatisierungsnetzwerken : wieviel Sicherheit braucht ein Automatisierungsnetzwerk?
T2  - Funkgestützte Kommunikation in der industriellen Automatisierungstechnik : Tagung Düsseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)
Y1  - 2004
SN  - 3-18-091843-8
SP  - 91
EP  - 104
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Sicherheit in kabellosen Netzwerken
T2  - SPS/IPC/DRIVES 2004 : SPS/IPC/DRIVES, Elektrische Automatisierung - Systeme und Komponenten, Fachmesse & Kongress, 23. - 25. Nov. 2004, Nürnberg
Y1  - 2004
SN  - 3-7723-6709-7
SP  - 335
EP  - 341
PB  - Poing
CY  - Franzis
ER  - 
TY  - CHAP
A1  - Quadflieg, Till
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jockenhövel, Stefan
A1  - Reisgen, Uwe
A1  - Gries, Thomas
ED  - Heslehurst, Rikard Benton
T1  - Shear connectors for hybrid joints of metal and FRP
T2  - Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference
Y1  - 2012
SN  - 978-0-9873285-0-2
SP  - [152]
EP  - [160]
PB  - Composites Australia
CY  - Hawthorne
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Service based Bluetooth dual-hop networks using CORBA
T2  - Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria
Y1  - 2005
SN  - 0-88986-457-8
SP  - 724
EP  - 728
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Bücking, Henrik
A1  - Pfaff, Raphael
A1  - Dirksmeier, Roger
T1  - Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles
T2  - Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Benner, Joachim
ED  - Peeken, Heinz
T1  - Schwingungstechnische Dimensionierung von Maschinensätzen mit Stromrichtermotoren
T2  - Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagenüberwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)
Y1  - 1989
SN  - 3-88585-639-5
N1  - Antriebstechnisches Kolloquium <3, 1989, Aachen>
SP  - 309
EP  - 333
PB  - Verl. TÜV Rheinland
CY  - Köln
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Thiele, Regina
T1  - Schweißverbindungen in Lithium-Ionen-Batterien
T2  - DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012. (DVS-Berichte ; 286)
Y1  - 2012
SN  - 978-3-87155-593-0
SP  - 157
EP  - 161
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Starke, Günther
T1  - Robotertechnik für individuelle Automatisierungslösungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen & Schneiden 2009“ – Stand und Entwicklungstendenzen
T2  - Schweissen und Schneiden
Y1  - 2009
SN  - 0036-7184 (Print)
SP  - N 13 (nach Seite 716)
PB  - DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Melcher, Karin
A1  - Franzen, Julian
T1  - Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems
T2  - Proceedings of the European Conference of the PHM Society
Y1  - 2018
VL  - 4
IS  - 1
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Chavez Bermudez, Victor Francisco
A1  - Cruz Castanon, Victor Fernando
A1  - Ruchay, Marco
A1  - Wollert, Jörg
ED  - Leipzig, Hochschule für Technik, Wirtschaft und Kultur
T1  - Rapid prototyping framework for automation applications based on IO-Link
T2  - Tagungsband AALE 2022
N2  - The development of protype applications with sensors and actuators in the automation industry requires tools that are independent of manufacturer, and are flexible enough to be modified or extended for any specific requirements. Currently, developing prototypes with industrial sensors and actuators is not straightforward. First of all, the exchange of information depends on the industrial protocol that these devices have. Second, a specific configuration and installation is done based on the hardware that is used, such as automation controllers or industrial gateways. This means that the development for a specific industrial protocol, highly depends on the hardware and the software that vendors provide. In this work we propose a rapid-prototyping framework based on Arduino to solve this problem. For this project we have focused to work with the IO-Link protocol. The framework consists of an Arduino shield that acts as the physical layer, and a software that implements the IO-Link Master protocol. The main advantage of such framework is that an application with industrial devices can be rapid-prototyped with ease as its vendor independent, open-source and can be ported easily to other Arduino compatible boards. In comparison, a typical approach requires proprietary hardware, is not easy to port to another system and is closed-source.
KW  - Rapid-prototyping
KW  - Arduino
KW  - IO-Link
KW  - Industrial Communication
Y1  - 2022
SN  - 978-3-910103-00-9
U6  - http://dx.doi.org/10.33968/2022.28
N1  - 18. AALE-Konferenz, Pforzheim, 09.03.-11.03.2022.
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Railway Challenge 2018 - Ein Wettbewerb für Parkbahn-Lokomotiven
T2  - Deine Bahn
Y1  - 2018
SN  - 0948-7263
SP  - 22
EP  - 24
ER  - 
TY  - CHAP
A1  - Klocke, Martina
T1  - Projektmodul im Bachelorstudiengang Maschinenbau und Mechatronik
T2  - VDI-Workshop Projektorientiertes und problem-basiertes Lernen (PBL) in der Ingenieurausbildung
Y1  - 2012
N1  - 25 Folien zum eingeladenen Vortrag beim VDI-Workshop. Darmstadt, 22./23.11.2012
SP  - 1
EP  - 25
ER  - 
TY  - CHAP
A1  - Klocke, Martina
T1  - Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik
T2  - Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Prüfen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen
Y1  - 2011
SP  - 1
EP  - 25
ER  - 
TY  - CHAP
A1  - Schmidt, Thomas
A1  - Kasch, Susanne
A1  - Eichler, Fabian
A1  - Thurn, Laura
T1  - Process strategies on laser-based melting of glass powder
T2  - Lasers in Manufacturing Conference 2021
N2  - This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component’s material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.
KW  - 3D-printing
KW  - glass
KW  - additive manufactureing
KW  - laser based powder fusion
Y1  - 2021
ER  - 
TY  - CHAP
A1  - Rieper, Harald
A1  - Gebhardt, Andreas
A1  - Stucker, Brent
T1  - Process parameters for Selective Laser Melting of AgCu7
T2  - DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3
Y1  - 2016
SN  - 978-3-8396-1001-5
N1  - DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17
SP  - 171
EP  - 176
PB  - Fraunhofer-Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Vredal, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen
T2  - Wireless Automation : Chancen, Lösungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)
Y1  - 2006
SN  - 3-18-091939-6
SP  - 135
EP  - 146
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zum zeitlichen Übertragungs- und Bündelfehlerverhalten der IEEE 802.15.4
T2  - ZigBee & Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, München
Y1  - 2006
PB  - Design&Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Röhrig, Christof
A1  - Großmann, Uwe
A1  - Künemund, Frank
A1  - Gansemer, Sebastian
A1  - Schürmann, Volker
A1  - Wollert, Jörg
T1  - Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration
T2  - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. Jörg F. Wollert
Y1  - 2008
SN  - 978-3-89838-608-1
SP  - 337
EP  - 348
PB  - AKA
CY  - Heidelberg
ER  -