TY  - CHAP
A1  - Hallmann, Marcus
A1  - Heidecker, Ansgar
A1  - Schlotterer, Markus
A1  - Dachwald, Bernd
T1  - GTOC8: results and methods of team 15 DLR
T2  - 26th AAS/AIAA Space Flight Mechanics Meeting, Napa, CA
N2  - This paper describes the results and methods used during the 8th Global Trajectory Optimization Competition (GTOC) of the DLR team. Trajectory optimization is crucial for most of the space missions and usually can be formulated as a global optimization problem. A lot of research has been done to different type of mission problems. The most demanding ones are low thrust transfers with e.g. gravity assist sequences. In that case the optimal control problem is combined with an integer problem. In most of the GTOCs we apply a filtering of the problem based on domain knowledge.
Y1  - 2016
N1  - 26th AAS/AIAA Space Flight Mechanics Meeting, February 14-18, 2016, Napa, California, U.S.A. Napa, CA
ER  - 
TY  - CHAP
A1  - Kerpen, Nils B.
A1  - Bung, Daniel Bernhard
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
T2  - 8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China
KW  - energy disspation
KW  - wave run-up
KW  - friction
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Computing olympic gold: Ski jumping as an example
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
Y1  - 2016
SN  - 978-3-940402-06-6
U6  - https://doi.org/10.17185/duepublico/40821
SP  - 54
EP  - 55
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Jung, Alexander
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Papadrakakis, M.
T1  - A 3D electromechanical FEM-based model for cardiac tissue
T2  - ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5–10 June 2016
Y1  - 2016
N1  - revised after the conference
P11367
ER  - 
TY  - CHAP
A1  - Wulfhorst, H.
A1  - Duwe, A.
A1  - Möhring, S.
A1  - Jurca, O.
A1  - Tippkötter, Nils
T1  - Analysis of pretreated biomass by differential scanning 132 calorimetry and multivariate data analysis
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 132
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Harzheim, Thomas
A1  - Heuermann, Holger
A1  - Marso, Michel
T1  - An Adaptive Biasing Method for SRD Comb Generators
T2  - 2016 German Microwave Conference (GeMiC)
Y1  - 2016
U6  - https://doi.org/10.1109/GEMIC.2016.7461613
N1  - GeMiC 2016 ; March 14–16, 2016, Bochum, Germany
SP  - 289
EP  - 292
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
ED  - Almeida, Luis
T1  - Fawkes for the RoboCup Logistics League
T2  - RoboCup 2015: Robot World Cup XIX
Y1  - 2016
SN  - 978-3-319-29339-4
U6  - https://doi.org/10.1007/978-3-319-29339-4_31
N1  - Lecture Notes in Computer Science ; 9513
SP  - 365
EP  - 373
PB  - Springer International Publishing
CY  - Cham
ER  - 
TY  - CHAP
A1  - Möhring, S.
A1  - Wulfhorst, H.
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - Pretreatment strategies for lignocellulosic biomass
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 131
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Towards trade facilitation via regulatory convergence: An analysis of the TTIP chapter on Electronic Communications
T2  - Regional ITS Conference of the International Telecommunications Society. Cambridge, United Kingdom, 7-9 September 2016
N2  - To give the exchange of goods and services between the European Union (EU) and the United States (U.S.) new momentum the two parties are currently negotiating the transatlantic free trade agreement Transatlantic Trade and Investment Partnership (TTIP). The aim is to create the largest free trade area in the world. The agreement, once entered into force, will oblige EU countries and the U.S. to further liberalize their markets.
The negotiations on TTIP include a chapter on Electronic Communications/ Telecommunications. The challenge therein will be securing commitments for market access to Electronic Communications services. At the same time, these commitments must reflect the legitimate need for consumer protection issues. The need to reduce Electronic Communications-related non-tariff barriers to trade between the Parties is due to the fact that these markets are heavily regulated. Without transnational rules as to regulations national governments can abuse these regulations to deter the market entry by new (foreign) suppliers. Thus the free trade agreement TTIP affects in many respects regulatory provisions on and access to Electronic Communications markets. The objective of this paper is therefore to examine to what extend the regulatory principles for Electronic Communications markets envisaged under TTIP will result in trade facilitation and regulatory convergence between the EU and the U.S.
As to this question the result of the analysis is that the chapter on Electronic Communications will be an important step towards facilitating trade in Electronic Communications services. At the same time some regulatory convergence will take place, but this convergence will not lead to a (full) harmonization of regulations. Rather the norm, also after TTIP negotiations will have been concluded successfully, will be mutual recognition of different regulatory regimes. Different regulations being the optimal policy response in different market settings will continue to exist. Moreover, it is very unlikely that such regulatory principles for the Electronic Communications sector are a vehicle for a race to the bottom in levels of consumer protection.
KW  - regulation
KW  - liberalisation
KW  - electronic communications markets
KW  - TTIP
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, S.
A1  - Hendrick, P.
A1  - Elsing, R.
T1  - Testing and analysis of the impact on engine cycle parameters and control system modifications using hydrogen or methane as fuel in an industrial gas turbine
T2  - Progress in propulsion physics ; Volume 8
Y1  - 2016
SN  - 978-5-94588-191-4
U6  - https://doi.org/10.1051/eucass/201608409
SP  - 409
EP  - 426
PB  - EDP Sciences
CY  - o.O.
ER  - 
TY  - CHAP
A1  - Broenner, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Streamlining extraction and analysis of android RAM images
T2  - Proceedings of the 2nd international conference on information systems security and privacy
Y1  - 2016
SN  - 978-989-758-167-0
U6  - https://doi.org/10.5220/0005652802550264
SP  - 255
EP  - 264
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
T1  - Basic research on lattice structures focused on the strut shape and welding beads
T2  - Physics Procedia
Y1  - 2016
U6  - https://doi.org/10.1016/j.phpro.2016.08.086
SN  - 1875-3884
N1  - Laser Assisted Net Shape Engineering 
9th International Conference on Photonic Technologies Proceedings of the LANE 2016
VL  - Vol. 83
SP  - 833
EP  - 838
ER  - 
TY  - CHAP
A1  - Rieper, Harald
A1  - Gebhardt, Andreas
A1  - Stucker, Brent
T1  - Process parameters for Selective Laser Melting of AgCu7
T2  - DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3
Y1  - 2016
SN  - 978-3-8396-1001-5
N1  - DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17
SP  - 171
EP  - 176
PB  - Fraunhofer-Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Wu, Ziyi
A1  - Kemper, Hans
T1  - The optimal 48 V – battery pack for a specific load profile of a heavy duty vehicle
T2  - 8. Internationale Fachtagung Kraftwerk Batterie : 26. – 27. April 2016, Münster, Deutschland
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - In-flight vibration-based structural health monitoring of aircraft wings
T2  - 30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea
N2  - This work presents a methodology for automated
damage-sensitive feature extraction and anomaly
detection under multivariate operational variability
for in-flight assessment of wings. The
method uses a passive excitation approach, i. e.
without the need for artificial actuation. The
modal system properties (natural frequencies and
damping ratios) are used as damage-sensitive
features. Special emphasis is placed on the use
of Fiber Bragg Grating (FBG) sensing technology
and the consideration of Operational and
Environmental Variability (OEV). Measurements
from a wind tunnel investigation with a composite
cantilever equipped with FBG and piezoelectric
sensors are used to successfully detect an impact
damage. In addition, the feasibility of damage
localisation and severity estimation is evaluated
based on the coupling found between damageand
OEV-induced feature changes.
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
T1  - The challenge of creating meta-inferences: Combining data representing institutional and individual perspectives on first-year support in higher education
T2  - 9th Conference on Social Science Methodology of the International Sociological Association, Leicester, UK
Y1  - 2016
N1  - RC33 Conference 2016
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Kleine, Harald
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Havermann, Marc
A1  - Olivier, Herbert
T1  - PIV Measurement of Shock Wave Diffraction
T2  - 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon
Y1  - 2016
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
T1  - The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance
T2  - 17th European Conference on Composite Materials – ECCM, Munich, Germany
Y1  - 2016
N1  - ECCM 17
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Matcha, Heike
ED  - Herneoja, Aulikki
ED  - Österlund, Toni
ED  - Markkanen, Piia
T1  - From Designing Buildings from Systems to Designing Systems for Buildings
T2  - Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1
N2  - We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.
KW  - Building Systems
KW  - Parametric Design
KW  - Parametric Modelling
KW  - Structuralist Architecture
Y1  - 2016
U6  - https://doi.org/10.52842/conf.ecaade.2016.1.237
N1  - Proceedings of the 34th eCAADe Conference, University of Oulu, Oulu, Finland, 22-26 August 2016.
SP  - 237
EP  - 240
PB  - ECAADe
CY  - Oulu, Finland
ER  -