TY  - CHAP
A1  - Christian, Esser
A1  - Montag, Tim
A1  - Schuba, Marko
A1  - Allhof, Manuel
T1  - Future critical infrastructure and security - cyberattacks on charging stations
T2  - 31st International Electric Vehicle Symposium & Exhibition and International Electric Vehicle Technology Conference (EVS31 & EVTeC 2018)
Y1  - 2018
SN  - 978-1-5108-9157-9
SP  - 665
EP  - 671
PB  - Society of Automotive Engineers of Japan (JSAE)
CY  - Tokyo
ER  - 
TY  - CHAP
A1  - Groß, Rolf Fritz
T1  - Möglichkeiten und Grenzen für Forschung an Fachhochschulen
T2  - Smart Building Convention und BIMconvention in Aachen im September
Y1  - 2018
N1  - 10. und 11. September 2018, Aachen
ER  - 
TY  - JOUR
A1  - Ketelhut, Maike
A1  - Göll, Fabian
A1  - Braunstein, Björn
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Comparison of different training algorithms for the leg extension training with an industrial robot
JF  - Current Directions in Biomedical Engineering
N2  - In the past, different training scenarios have been developed and implemented on robotic research platforms, but no systematic analysis and comparison have been done so far. This paper deals with the comparison of an isokinematic (motion with constant velocity) and an isotonic (motion against constant weight) training algorithm. Both algorithms are designed for a robotic research platform consisting of a 3D force plate and a high payload industrial robot, which allows leg extension training with arbitrary six-dimensional motion trajectories. In the isokinematic as well as the isotonic training algorithm, individual paths are defined i n C artesian s pace by sufficient s upport p oses. I n t he i sotonic t raining s cenario, the trajectory is adapted to the measured force as the robot should only move along the trajectory as long as the force applied by the user exceeds a minimum threshold. In the isotonic training scenario however, the robot’s acceleration is a function of the force applied by the user. To validate these findings, a simulative experiment with a simple linear trajectory is performed. For this purpose, the same force path is applied in both training scenarios. The results illustrate that the algorithms differ in the force dependent trajectory adaption.
KW  - Rehabilitation Technology and Prosthetics
KW  - Surgical Navigation and Robotics
Y1  - 2018
U6  - https://doi.org/10.1515/cdbme-2018-0005
SN  - 2364-5504
VL  - 4
IS  - 1
SP  - 17
EP  - 20
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Werkhausen, Amelie
A1  - Albracht, Kirsten
A1  - Cronin, Neil J
A1  - Paulsen, Gøran
A1  - Bojsen-Møller, Jens
A1  - Seynnes, Olivier R
T1  - Effect of training-induced changes in achilles tendon stiffness on muscle-tendon behavior during landing
JF  - Frontiers in physiology
N2  - During rapid deceleration of the body, tendons buffer part of the elongation of the muscle-tendon unit (MTU), enabling safe energy dissipation via eccentric muscle contraction. Yet, the influence of changes in tendon stiffness within the physiological range upon these lengthening contractions is unknown. This study aimed to examine the effect of training-induced stiffening of the Achilles tendon on triceps surae muscle-tendon behavior during a landing task. Twenty-one male subjects were assigned to either a 10-week resistance-training program consisting of single-leg isometric plantarflexion (n = 11) or to a non-training control group (n = 10). Before and after the training period, plantarflexion force, peak Achilles tendon strain and stiffness were measured during isometric contractions, using a combination of dynamometry, ultrasound and kinematics data. Additionally, testing included a step-landing task, during which joint mechanics and lengths of gastrocnemius and soleus fascicles, Achilles tendon, and MTU were determined using synchronized ultrasound, kinematics and kinetics data collection. After training, plantarflexion strength and Achilles tendon stiffness increased (15 and 18%, respectively), and tendon strain during landing remained similar. Likewise, lengthening and negative work produced by the gastrocnemius MTU did not change detectably. However, in the training group, gastrocnemius fascicle length was offset (8%) to a longer length at touch down and, surprisingly, fascicle lengthening and velocity were reduced by 27 and 21%, respectively. These changes were not observed for soleus fascicles when accounting for variation in task execution between tests. These results indicate that a training-induced increase in tendon stiffness does not noticeably affect the buffering action of the tendon when the MTU is rapidly stretched. Reductions in gastrocnemius fascicle lengthening and lengthening velocity during landing occurred independently from tendon strain. Future studies are required to provide insight into the mechanisms underpinning these observations and their influence on energy dissipation.
KW  - achilles tendon
KW  - energy absorption
KW  - energy dissipation
KW  - mechanical buffer
KW  - stiffness
Y1  - 2018
U6  - https://doi.org/10.3389/fphys.2018.00794
SN  - 1664-042X
IS  - 9
PB  - Frontiers Research Foundation
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-Nox-Micromix-Combustion
JF  - Journal of Engineering for Gas Turbines and Power
N2  - The Dry-Low-NOx (DLN) Micromix combustion technology has been developed as low emission combustion principle for industrial gas turbines fueled with hydrogen or syngas. The combustion process is based on the phenomenon of jet-in-crossflow-mixing (JICF). Fuel is injected perpendicular into the air-cross-flow and burned in a multitude of miniaturized, diffusion-like flames. The miniaturization of the flames leads to a significant reduction of NOx emissions due to the very short residence time of reactants in the flame. In the Micromix research approach, computational fluid dynamics (CFD) analyses are validated toward experimental results. The combination of numerical and experimental methods allows an efficient design and optimization of DLN Micromix combustors concerning combustion stability and low NOx emissions. The paper presents a comparison of several numerical combustion models for hydrogen and hydrogen-rich syngas. They differ in the complexity of the underlying reaction mechanism and the associated computational effort. The performance of a hybrid eddy-break-up (EBU) model with a one-step global reaction is compared to a complex chemistry model and a flamelet generated manifolds (FGM) model, both using detailed reaction schemes for hydrogen or syngas combustion. Validation of numerical results is based on exhaust gas compositions available from experimental investigation on DLN Micromix combustors. The conducted evaluation confirms that the applied detailed combustion mechanisms are able to predict the general physics of the DLN-Micromix combustion process accurately. The FGM method proved to be generally suitable to reduce the computational effort while maintaining the accuracy of detailed chemistry.
Y1  - 2018
U6  - https://doi.org/10.1115/1.4038882
SN  - 0742-4795
N1  - Article number 081504;
Paper No: GTP-17-1567
VL  - 140
IS  - 8
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Boesen, Niklas
A1  - Gellert, Christoph
T1  - Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Toth, Norbert
A1  - Wejmo, Elisabet
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Cerotti, Matteo
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
T1  - Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing
T2  - 2018 IEEE Aerospace Conference : 3-10 March 2018
Y1  - 2018
SN  - 978-1-5386-2014-4
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
A1  - Kubalski, Thomas
T1  - Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11477
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Milkova, Kristina
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Dumova-Jovanoska, Elena
T1  - Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10522
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11440
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - https://doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
T1  - Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene
JF  - Bauingenieur
Y1  - 2018
SN  - 0005-6650
N1  - Der Artikel befindet sich in der Beilage "D–A–CH – Mitteilungsblatt – Erdbebeningenieurwesen und Baudynamik" (ISSN 1434–6591)
VL  - 93
SP  - 2
EP  - 10
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative System for Earthquake Resistant Masonry Infill Walls
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11479
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian
A1  - Herčík, David
A1  - Herique, Alain
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron
A1  - Kofman, Wlodek
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - Maiwald, Volker
A1  - Mikschl, Tobias
A1  - Mikulz, Eugen
A1  - Montenegro, Sergio
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Plettemeier, Dirk
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Tardivel, Simon
A1  - Toth, Norbert
A1  - Wejmo, Elisabet
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Efficient massively parallel prospection for ISRU by multiple near-earth asteroid rendezvous using near-term solar sails and'now-term'small spacecraft solutions
T2  - 2nd Asteroid Science Intersections with In-Space Mine Engineering – ASIME 2018
N2  - Physical interaction with small solar system bodies (SSSB) is key for in-situ resource utilization (ISRU). The design of mining missions requires good understanding of SSSB properties, including composition, surface and interior structure, and thermal environment. But as the saying goes "If you've seen one asteroid, you've seen one Asteroid": Although some patterns may begin to appear, a stable and reliable scheme of SSSB classification still has to be evolved. Identified commonalities would enable generic ISRU technology and spacecraft design approaches with a high degree of re-use. Strategic approaches require much broader in-depth characterization of the SSSB populations of interest to the ISRU community. The DLR-ESTEC GOSSAMER Roadmap Science Working Groups identified target-flexible Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the missions only feasible with solar sail propulsion, showed the ability to access any inclination and a wide range of heliocentric distances as well as continuous operation close to Earth's orbit where low delta-v objects reside.
Y1  - 2018
N1  - 2nd Asteroid Science Intersections with In-Space Mine Engineering – ASIME 2018
16-17 April 2018, Belval, Luxembourg
SP  - 1
EP  - 33
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin R.
T1  - Cybersecurity awareness training provided by the competence developing game GHOST
T2  - ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions
N2  - This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game
KW  - Awareness
KW  - CDG
KW  - Serious Game
KW  - tablet game
KW  - business simulation
Y1  - 2018
SN  - 978-1-61208-616-3
N1  - Proceeding of the Eleventh International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy.
SP  - 81
EP  - 87
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Muschallik, Lukas
A1  - Gonzalez, Laura Osorio
A1  - Bongaerts, Johannes
A1  - Wagner, Torsten
A1  - Selmer, Thorsten
A1  - Siegert, Petra
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development and characterization of a field-effect biosensor for the detection of acetoin
JF  - Biosensors and Bioelectronics
N2  - A capacitive electrolyte-insulator-semiconductor (EIS) field-effect biosensor for acetoin detection has been presented for the first time. The EIS sensor consists of a layer structure of Al/p-Si/SiO₂/Ta₂O₅/enzyme acetoin reductase. The enzyme, also referred to as butane-2,3-diol dehydrogenase from B. clausii DSM 8716T, has been recently characterized. The enzyme catalyzes the (R)-specific reduction of racemic acetoin to (R,R)- and meso-butane-2,3-diol, respectively. Two different enzyme immobilization strategies (cross-linking by using glutaraldehyde and adsorption) have been studied. Typical biosensor parameters such as optimal pH working range, sensitivity, hysteresis, linear concentration range and long-term stability have been examined by means of constant-capacitance (ConCap) mode measurements. Furthermore, preliminary experiments have been successfully carried out for the detection of acetoin in diluted white wine samples.
Y1  - 2018
U6  - https://doi.org/10.1016/j.bios.2018.05.023
VL  - 115
SP  - 1
EP  - 6
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Völker, Veronika
A1  - Wolf, Martin R.
T1  - The user-focused storybuilding framework for competence developing games - a design-framework considering the basics of an educational game’s story
T2  - ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions
N2  - During the development of a Competence Developing Game’s (CDG) story it is indispensable to understand the target audience. Thereby, CDGs stories represent more than just the plot. The Story is about the
Setting, the Characters and the Plot. As a toolkit to support the
development of such a story, this paper introduces the UserFocused Storybuilding (short UFoS) Framework for CDGs. The Framework and its utilization will be explained, followed by a description of its development and derivation, including an empirical study. In addition, to simplify the Framework use regarding the CDG’s target audience, a new concept of Nine Psychographic Player Types will be explained. This concept of Player Types provides an approach to handle the differences in between players during the UFoS Framework use. Thereby,
this article presents a unique approach to the development of
target group-differentiated CDGs stories.
KW  - Competence Developing Game
KW  - Serious Game
KW  - Video Game
KW  - Story
KW  - Player Types
Y1  - 2018
SN  - 978-1-61208-616-3
N1  - Proceeding of the Eleventh International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy.
SP  - 98
EP  - 106
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Herčík, David
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron D
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - Maiwald, Volker
A1  - Mikschl, Tobias
A1  - Mikulz, Eugen
A1  - Montenegro, Sergio
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Tardivel, Simon
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Small spacecraft based multiple near-earth asteroid rendezvous and landing with near-term solar sails and ‘Now-Term ‘technologies
T2  - 69 th International Astronautical Congress (IAC)
N2  - Physical interaction with small solar system bodies (SSSB) is the next step in planetary science, planetary in-situ resource utilization (ISRU), and planetary defense (PD). It requires a broader understanding of the surface properties of the target objects, with particular interest focused on those near Earth. Knowledge of composition, multi-scale surface structure, thermal response, and interior structure is required to design, validate and operate missions addressing these three fields. The current level of understanding is occasionally simplified into the phrase, ”If you’ve seen one asteroid, you’ve seen one asteroid”, meaning that the in-situ characterization of SSSBs has yet to cross the threshold towards a robust and stable scheme of classification. This would enable generic features in spacecraft design, particularly for ISRU and science missions. Currently, it is necessary to characterize any potential target object sufficiently by a dedicated pre-cursor mission to design the mission which then interacts with the object in a complex fashion. To open up strategic approaches, much broader in-depth characterization of potential target objects would be highly desirable. In SSSB science missions, MASCOT-like nano-landers and instrument carriers which integrate at the instrument level to their mothership have met interest. By its size, MASCOT is compatible with small interplanetary missions. The DLR-ESTEC Gossamer Roadmap Science Working Groups‘ studies identified Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the space science missions only feasible with solar sail propulsion. The Solar Polar Orbiter (SPO) study showed the ability to access any inclination, theDisplaced-L1 (DL1) mission operates close to Earth, where objects of interest to PD and for ISRU reside. Other studies outline the unique capability of solar sails to provide access to all SSSB, at least within the orbit of Jupiter, and significant progress has been made to explore the performance envelope of near-term solar sails for MNR. However, it is difficult for
sailcraft to interact physically with a SSSB. We expand and extend the philosophy of the recently qualified DLR Gossamer solar sail deployment technology using efficient multiple sub-spacecraft integration to also include landers for one-way in-situ investigations and sample-return missions by synergetic integration and operation of sail and lander. The MASCOT design concept and its characteristic features have created an ideal counterpart for thisand has already been adapted to the needs of the AIM spacecraft, former part of the NASA-ESA AIDA missionDesigning the 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018. IAC-18-F1.2.3 Page 2 of 17 combined spacecraft for piggy-back launch accommodation enables low-cost massively parallel access to the NEA population.
KW  - multiple NEA rendezvous
KW  - solar sail
KW  - GOSSAMER-1
KW  - MASCOT
KW  - small spacecraft
Y1  - 2018
N1  - 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018.
https://www.bho-legal.com/1-5-october-2018-69th-international-astronautical-congress-2018-in-bremen-germany/
SP  - 1
EP  - 18
ER  - 
TY  - CHAP
A1  - Anic, Filip
A1  - Penava, Davorin
A1  - Guljas, Ivica
A1  - Sarhosis, Vasilis
A1  - Abrahamczyk, Lars
A1  - Butenweg, Christoph
T1  - The Effect of Openings on Out-of-Plane Capacity of Masonry Infilled Reinforced Concrete Frames
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10168
SP  - 1
EP  - 11
ER  -