TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Multiple sensor-type system for monitoring the microbicidal effectiveness of aseptic sterilisation processes
JF  - Food control
N2  - The present work describes a novel multiple sensor-type system for the real-time analysis of aseptic sterilisation processes employing gaseous hydrogen peroxide (H2O2) as a sterilant. The inactivation kinetics of Bacillus atrophaeus by gaseous H2O2 have been investigated by means of a methodical calibration experiment, taking into account the process variables H2O2 concentration, humidity and gas temperature. It has been found that the microbicidal effectiveness at H2O2 concentrations above 2% v/v is largely determined by the concentration itself, while at lower H2O2 concentrations, the gas temperature and humidity play a leading role. Furthermore, the responses of different types of gas sensors towards the influencing factors of the sterilisation process have been analysed within the same experiment. Based on a correlation established between the inactivation kinetics and the sensor responses, a calorimetric H2O2 sensor and a metal-oxide semiconductor (MOX) sensor have been identified as possible candidates for monitoring the microbicidal effectiveness of aseptic sterilisation processes employing gaseous H2O2. Therefore, two linear models that describe the relationship between sensor response and microbicidal effectiveness have been proposed.
Y1  - 2015
U6  - https://doi.org/10.1016/j.foodcont.2014.07.063
SN  - 1873-7129 (E-Journal); 0956-7135 (Print)
VL  - 47
SP  - 615
EP  - 622
ER  - 
TY  - JOUR
A1  - Khaydukova, M. M.
A1  - Zadorozhnaya, O. A.
A1  - Kirsanov, D. O.
A1  - Iken, Heiko
A1  - Rolka, David
A1  - Schöning, Michael Josef
A1  - Babain, V. A.
A1  - Vlasov, Yu. G.
A1  - Legin, A. V.
T1  - Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes
JF  - Russian journal of applied chemistry
N2  - The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.
Y1  - 2014
U6  - https://doi.org/10.1134/S1070427214030112
SN  - 1608-3296 (E-Journal); 1070-4272 (Print)
VL  - 87
IS  - 3
SP  - 307
EP  - 314
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Recent developments of chemical imaging sensor systems based on the principle of the light-addressable potentiometric sensor
JF  - Sensors and actuators B: Chemical
N2  - The light-addressable potentiometric sensor (LAPS) is an electrochemical sensor with a field-effect structure to detect the variation of the Nernst potential at its sensor surface, the measured area on which is defined by illumination. Thanks to this light-addressability, the LAPS can be applied to chemical imaging sensor systems, which can visualize the two-dimensional distribution of a particular target ion on the sensor surface. Chemical imaging sensor systems are expected to be useful for analysis of reaction and diffusion in various electrochemical and biological samples. Recent developments of LAPS-based chemical imaging sensor systems, in terms of the spatial resolution, measurement speed, image quality, miniaturization and integration with microfluidic devices, are summarized and discussed.
Y1  - 2015
U6  - https://doi.org/10.1016/j.snb.2014.09.002
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 926
EP  - 932
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Martens, D.
A1  - Liu, X.
A1  - Bienstman, P.
A1  - Fahlman, M.
A1  - Schöning, Michael Josef
A1  - Michiels, L.
A1  - Haenen, K.
A1  - Serpengüzel, A.
A1  - Wagner, Patrick
T1  - Photonic studies on polymer-coated sapphire-spheres : a model system for biological ligands
JF  - Sensors and actuators A: Physical
N2  - In this study we show an optical biosensor concept, based on elastic light scattering from sapphire microspheres. Transmitted and elastic scattering intensity of the microspheres (radius 500 μm, refractive index 1.77) on an optical fiber half coupler is analyzed at 1510 nm. The 0.43 nm angular mode spacing of the resonances is comparable to the angular mode spacing value estimated using the optical size of the microsphere. The spectral linewidths of the resonances are in the order of 0.01 nm, which corresponds to quality factors of approximately 105. A polydopamine layer is used as a functionalizing agent on sapphire microspherical resonators in view of biosensor implementation. The varying layer thickness on the microsphere is determined as a function of the resonance wavelength shift. It is shown that polymer functionalization has a minor effect on the quality factor. This is a promising step toward the development of an optical biosensor.
Y1  - 2015
U6  - https://doi.org/10.1016/j.sna.2014.11.024
SN  - 1873-3069 (E-Journal); 0924-4247 (Print)
VL  - 222
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Seki, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination
JF  - Procedia Engineering
N2  - The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.563
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 612
EP  - 615
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Almajhdi, Fahad N.
A1  - Senger, Tilo
A1  - Amer, Haitham M.
A1  - Gissmann, Lutz
A1  - Öhlschläger, Peter
T1  - Design of a highly effective therapeutic HPV16 E6/E7-specific DNA vaccine: optimization by different ways of sequence rearrangements (Shuffling)
JF  - PLOS one
N2  - Persistent infection with the high-risk Human Papillomavirus type 16 (HPV 16) is the causative event for the development of cervical cancer and other malignant tumors of the anogenital tract and of the head and neck. Despite many attempts to develop therapeutic vaccines no candidate has entered late clinical trials. An interesting approach is a DNA based vaccine encompassing the nucleotide sequence of the E6 and E7 viral oncoproteins. Because both proteins are consistently expressed in HPV infected cells they represent excellent targets for immune therapy. Here we report the development of 8 DNA vaccine candidates consisting of differently rearranged HPV-16 E6 and E7 sequences within one molecule providing all naturally occurring epitopes but supposedly lacking transforming activity. The HPV sequences were fused to the J-domain and the SV40 enhancer in order to increase immune responses. We demonstrate that one out of the 8 vaccine candidates induces very strong cellular E6- and E7- specific cellular immune responses in mice and, as shown in regression experiments, efficiently controls growth of HPV 16 positive syngeneic tumors. This data demonstrates the potential of this vaccine candidate to control persistent HPV 16 infection that may lead to malignant disease. It also suggests that different sequence rearrangements influence the immunogenecity by an as yet unknown mechanism.
Y1  - 2014
U6  - https://doi.org/10.1371/journal.pone.0113461
SN  - 1932-6203
VL  - 11
IS  - 9
PB  - PLOS
CY  - San Francisco
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Bäcker, Matthias
T1  - Chip-basierte Sensoren für die Biotechnik
Y1  - 2012
SN  - 1611-0854
N1  - 4 Seiten
VL  - 13
IS  - 2
PB  - BIOCOM
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Dünnschichtsensoren für die Schwermetallanalytik : Mikroelektroden auf Chalkogenidglasbasis
JF  - GIT Labor-Fachzeitschrift
N2  - Die Detektion von Schadstoffen repräsentiert in der Umweltanalytik eine wichtige Aufgabenstellung. Gerade die Abwasser- bzw. Brauchwasseranalytik sowie die Prozesskontrolle haben einen hohen Stellenwert. Siliziumbasierte Dünnschichtsensoren bieten eine kostengünstige Möglichkeit, „online“-Messungen bzw. Vor-Ort-Messungen zeitnah durchzuführen. In dieser Arbeit wird ein potentiometrisches Sensorarray auf der Basis von Chalkogenidgläsern zur Detektion von Schwermetallen in wässrigen Medien vorgestellt.
Y1  - 2012
IS  - 4
SP  - 285
EP  - 287
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Warmer, Johannes
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
A1  - Kaul, Peter
T1  - Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
JF  - Physica status solidi (a)
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431882
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1289
EP  - 1298
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Moritz, Werner
A1  - Finger, Friedhelm
A1  - Schöning, Michael Josef
ED  - Comini, Elisabetta
T1  - Application of thin-film amorphous silicon to chemical imaging
JF  - Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.
Y1  - 2006
SN  - 9781558998711
N1  - Materials Research Society symposia proceedings; v. 915
IS  - Paper 0910-A-20-01
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Henken, F. E.
A1  - Oosterhuis, K.
A1  - Öhlschläger, Peter
A1  - Bosch, L.
A1  - Hooijberg, E.
A1  - Haanen, J. B. A. G.
A1  - Steenbergen, R. D. M.
T1  - Preclinical safety evaluation of DNA vaccines encoding modified HPV16 E6 and E7
JF  - Vaccine
N2  - Persistent infection with high-risk human papillomaviruses (hrHPV) can result in the formation of anogenital cancers. As hrHPV proteins E6 and E7 are required for cancer initiation and maintenance, they are ideal targets for immunotherapeutic interventions. Previously, we have described the development of DNA vaccines for the induction of HPV16 E6 and E7 specific T cell immunity. These vaccines consist of ‘gene-shuffled’ (SH) versions of HPV16 E6 and E7 that were fused to Tetanus Toxin Fragment C domain 1 (TTFC) and were named TTFC-E6SH and TTFC-E7SH. Gene-shuffling was performed to avoid the risk of inducing malignant transformation at the vaccination site. Here, we describe the preclinical safety evaluation of these candidate vaccines by analysis of their transforming capacity in vitro using established murine fibroblasts (NIH 3T3 cells) and primary human foreskin keratinocytes (HFKs). We demonstrate that neither ectopic expression of TTFC-E6SH and TTFC-E7SH alone or in combination enabled NIH 3T3 cells to form colonies in soft agar. In contrast, expression of HPV16 E6WT and E7WT alone or in combination resulted in effective transformation. Similarly, retroviral transduction of HFKs from three independent donors with both TTFC-E6SH and TTFC-E7SH alone or in combination did not show any signs of immortalization. In contrast, the combined expression of E6WT and E7WT induced immortalization in HFKs from all donors. Based on these results we consider it justified to proceed to clinical evaluation of DNA vaccines encoding TTFC-E6SH and TTFC-E7SH in patients with HPV16 associated (pre)malignancies.
Y1  - 2012
U6  - https://doi.org/10.1016/j.vaccine.2012.04.013
SN  - 0264-410X
VL  - 30
IS  - 28
SP  - 4259
EP  - 4266
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Immel, Timo
A1  - Grützke, Martin
A1  - Späte, Anne-Katrin
A1  - Groth, Ulrich
A1  - Öhlschläger, Peter
A1  - Huhn, Thomas
T1  - Synthesis and X-ray structure analysis of a heptacoordinate titanium(IV)-bis-chelate with enhanced in vivo antitumor efficacy
JF  - Chemical Communications
N2  - Chelate stabilization of a titanium(IV)–salan alkoxide by ligand exchange with 2,6-pyridinedicarboxylic acid (dipic) resulted in heptacoordinate complex 3 which is not redox-active, stable on silica gel and has increased aqueous stability. 3 is highly toxic in HeLa S3 and Hep G2 and has enhanced antitumor efficacy in a mouse cervical-cancer model.
Y1  - 2012
U6  - https://doi.org/10.1039/C2CC31624B
SN  - 1364-548X
VL  - 48
IS  - 46
SP  - 5790
EP  - 5792
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, M.
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hamad, E. M.
A1  - Bilatto, S. E. R.
A1  - Adly, N. Y.
A1  - Correa, D. S.
A1  - Wolfrum, B.
A1  - Schöning, Michael Josef
A1  - Offenhäusser, A.
A1  - Yakushenko, A.
T1  - Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
JF  - Lab on a Chip
N2  - Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.
Y1  - 2016
U6  - https://doi.org/10.1039/C5LC01195G
SN  - 1473-0189
VL  - 16
IS  - 1
SP  - 70
EP  - 74
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Yu, Bing
A1  - Isoda, Hiroko
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Visualization of the recovery process of defects in a cultured cell layer by chemical imaging sensor
JF  - Sensors and Actuators B: Chemical
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) in the sample. In this study, a novel cell assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the recovery of defects in a cell layer brought into proximity of the sensing surface. A reduced impedance at a defect formed artificially in a cell layer was successfully visualized in a photocurrent image. The cell layer was cultured over two weeks, during which the temporal change of the photocurrent distribution corresponding to the recovery of the defect was observed.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.04.018
SN  - 0925-4005
VL  - 236
SP  - 965
EP  - 969
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Takenaga, Shoko
A1  - Wagner, Patrick
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Determination of the extracellular acidification of Escherichia coli K12 with a multi-​chamber-​based LAPS system
JF  - Physica status solidi (a)
N2  - On-line monitoring of the metabolic activity of microorganisms involved in intermediate stages of biogas production plays an important role to avoid undesirable “down times” during the biogas production. In order to control this process, an on-chip differential measuring system based on the light-addressable potentiometric sensor (LAPS) principle combined with a 3D-printed multi-chamber structure has been realized. As a test microorganism, Escherichia coli K12 (E. coli K12) were used for cell-based measurements. Multi-chamber structures were developed to determine the metabolic activity of E. coli K12 in suspension for a different number of cells, responding to the addition of a constant or variable amount of glucose concentrations, enabling differential and simultaneous measurements.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533043
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1479
EP  - 1485
PB  - Wiley-VCH
CY  - Weinheim
ER  -