TY  - CHAP
A1  - Hardt, Arno
A1  - Abdel-Gawad, A
A1  - Martin, S.
A1  - Reich, J.
T1  - Design procedures for the Juelich QQDDQ high resolution spectrometer
T2  - Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975
Y1  - 1975
SP  - 45
EP  - 51
ER  - 
TY  - CHAP
A1  - Hirsch, G.
A1  - Wahle, Michael
ED  - Leadon, Bernhard M.
T1  - Design criteria for dynamic vibration absorbers with regard to the nonproportional damping
T2  - Proceedings / The Third US National Conference on Wind Engineering Research, February 26 - March 1, 1978, University of Florida, Gainesville
Y1  - 1978
N1  - NSF grant no. PFR77-10170 A01. -  US National Conference on Wind Engineering Research <3, 1978, Gainesville, Fla.>
SP  - 507
EP  - 510
PB  - Univ. of Florida, Div. of Continuing Education Publ.
CY  - Gainsville, Fla.
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Design concept and modeling of an advanced solar photon thruster
T2  - Advances in the Astronautical Sciences
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.
KW  - solar sails
Y1  - 2009
SN  - 978-087703554-1
SN  - 00653438
N1  - 19th AAS/AIAA Space Flight Mechanics Meeting; Savannah, GA; United States; 8 February 2009 through 12 February 2009
SP  - 723
EP  - 740
PB  - American Astronautical Society
CY  - San Diego, Calif.
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Design by Analysis of Pressure Components by non-linear Optimization
N2  - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.
KW  - Analytischer Zulaessigkeitsnachweis
KW  - FEM
KW  - Einspiel-Analyse
KW  - design-by-analysis
KW  - finite element analysis
KW  - limit and shakedown analysis
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Terstegge, Andreas
A1  - Weber, S.
A1  - Herzog, H.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - Design and implementation aspects of a 3D reconstruction algorithm for the Jülich TierPET system
T2  - 1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97
Y1  - 1997
SP  - 170
EP  - 173
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - 2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020
Y1  - 2020
SN  - 978-3-9820397-1-8
SP  - 124
EP  - 127
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rajan, Sreelakshmy
T1  - Design and construction techniques of AAC masonry buildings in earthquakes regions
T2  - 10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
T1  - Desalination systems with renewable energies
T2  - DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut Jülich / Deutsche Meerwasserentsalzung e.V.
Y1  - 2008
SN  - 978-3-86861-017-8
PB  - DME
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schulte-Tigges, Joschua
A1  - Matheis, Dominik
A1  - Reke, Michael
A1  - Walter, Thomas
A1  - Kaszner, Daniel
ED  - Krömker, Heidi
T1  - Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain
T2  - HCII 2023: HCI in Mobility, Transport, and Automotive Systems
N2  - Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle’s software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.
KW  - V2X
KW  - Transiton of Control
KW  - Minimum Risk Manoeuvre
KW  - Operational Design Domain
KW  - Connected Automated Vehicle
Y1  - 2023
SN  - 978-3-031-35677-3 (Print)
SN  - 978-3-031-35678-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-35678-0_12
N1  - 5th International Conference, MobiTAS 2023, Held as Part of the 25th HCI International Conference, HCII 2023, Copenhagen, Denmark, July 23–28, 2023.
SP  - 200
EP  - 210
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Kuperjans, Isabel
ED  - Bourg, Dominique
ED  - Erkman, Suren
T1  - Decision-support-system for technical, economical and ecological design and evaluation of industrial energy systems
T2  - Industrial ecology and sustainability : conferences and workshops ; September 22 - 25, 1999, Troyes, France
Y1  - 2000
PB  - Université de technologie de Troyes Genève : Institute for communication and analysis of science and technology
CY  - [Troyes]
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - Cybersecurity awareness training provided by the competence developing game GHOST
T2  - ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions
N2  - This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game
KW  - Awareness
KW  - CDG
KW  - Serious Game
KW  - tablet game
KW  - business simulation
Y1  - 2018
SN  - 978-1-61208-616-3
N1  - Proceeding of the Eleventh International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy.
SP  - 81
EP  - 87
ER  - 
TY  - CHAP
A1  - Stephan, Achim
A1  - Heuermann, Holger
A1  - Prantner, Michael
T1  - Cutting human tissue with novel atmospheric-pressure microwave plasma jet
T2  - 46th European Microwave Conference (EuMC)
Y1  - 2016
SN  - 978-2-87487-043-9
U6  - http://dx.doi.org/10.1109/EuMC.2016.7824490
SP  - 902
EP  - 905
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces
T2  - Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018
Y1  - 2018
SN  - 978-989-758-276-9
U6  - http://dx.doi.org/10.5220/0006692802140221
SP  - 214
EP  - 221
ER  - 
TY  - CHAP
A1  - Jockwer, R.
A1  - Kleiber, M.
A1  - Uibel, Thomas
ED  - Görlacher, Rainer
T1  - Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners
T2  - International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia
Y1  - 2018
SP  - 461
EP  - 466
PB  - Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen
CY  - Karlsruhe
ER  -