TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
A1  - Mergner, Julia
A1  - Jänsch, Vanessa
T1  - Entwicklung studienrelevanter Kompetenzen im Zusammenspiel mit Studieneinstiegsangeboten
T2  - KoBF-Auswertungsworkshop 31.05.-01.06.2017
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - https://doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kemper, Hans
A1  - Hellenbroich, Gereon
A1  - Esch, Thomas
T1  - Concept of an innovative passenger-car hybrid drive for European driving conditions
T2  - Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig
N2  - The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 % savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.
Y1  - 2009
SN  - 978-3-937655-20-8
SP  - 264
EP  - 287
PB  - Gesamtzentrum für Verkehr (GZVB)
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Pflug, J.
A1  - Wahle, Michael
ED  - Bürger, Gudrun
T1  - Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente
T2  - Basistechnologien für neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt ; 1994,3)
Y1  - 1994
SP  - 1135
EP  - 1144
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes
T2  - Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)
Y1  - 1983
SP  - 339
EP  - 353
PB  - Begell House
CY  - Redding, Connecticut
ER  -