TY  - CHAP
A1  - Heer, Thomas
A1  - Redkowitz, Daniel
A1  - Kraft, Bodo
T1  - Tool Support for the Integration of Light-Weight Ontologies
N2  - Abstract of the authors: In many areas of computer science ontologies become more and more important. The use of ontologies for domain modeling often brings up the issue of ontology integration. The task of merging several ontologies, covering specific subdomains, into one united ontology has to be solved. Many approaches for ontology integration aim at automating the process of ontology alignment. However, a complete automation is not feasible, and user interaction is always required. Nevertheless, most ontology integration tools offer only very limited support for the interactive part of the integration process. In this paper, we present a novel approach for the interactive integration of ontologies. The result of the ontology integration is incrementally updated after each definition of a correspondence between ontology elements. The user is guided through the ontologies to be integrated. By restricting the possible user actions, the integrity of all defined correspondences is ensured by the tool we developed. We evaluated our tool by integrating different regulations concerning building design.
KW  - Ontologie <Wissensverarbeitung>
KW  - Knowledge Management
KW  - Ontology Engineering
KW  - Information Integration Tools
KW  - Human Factors
Y1  - 2008
SN  - 978-3-642-00670-8
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Szelinski, E.
A1  - Heitzer, Michael
T1  - Kollapsanalyse von längsfehlerbehafteten Rohren und Behältern
T1  - Collapse analysis of longitudinally flawed pipes and vessels
N2  - Es werden verbesserte Kollapsanalysen von dickwandigen, mit axialen Oberflächenfehlern behafteten Rohren und Behältern vorgeschlagen.
KW  - Druckbehälter
KW  - Stahl
KW  - Druckbelastung
KW  - Druckbeanspruchung
KW  - Rohr
KW  - Rohrbruch
KW  - Fehlerstellen
KW  - pipes
KW  - vessels
KW  - load limit
KW  - burst tests
KW  - burst pressure
KW  - flaw
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
T1  - Limit and shakedown reliability analysis by nonlinear programming
N2  - 7th International Conference on Reliability of Materials and Structures (RELMAS 2008). June 17 - 20, 2008 ; Saint Petersburg, Russia. pp 354-358. Reprint with corrections in red Introduction Analysis of advanced structures working under extreme heavy loading such as nuclear power plants and piping system should take into account the randomness of loading, geometrical and material parameters. The existing reliability are restricted mostly to the elastic working regime, e.g. allowable local stresses. Development of the limit and shakedown reliability-based analysis and design methods, exploiting potential of the shakedown working regime, is highly needed. In this paper the application of a new algorithm of probabilistic limit and shakedown analysis for shell structures is presented, in which the loading and strength of the material as well as the thickness of the shell are considered as random variables. The reliability analysis problems may be efficiently solved by using a system combining the available FE codes, a deterministic limit and shakedown analysis, and the First and Second Order Reliability Methods (FORM/SORM). Non-linear sensitivity analyses are obtained directly from the solution of the deterministic problem without extra computational costs.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - Reliability analysis of shells based on direct plasticity methods
N2  - Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis
N2  - Abstracts of the Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30th - July, 4th 2008, Venice, Italy. 2 pages with abstracts of the authors, Ill. and references.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
KW  - First-order reliability method
KW  - second-order reliability method
KW  - Sensitivity
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Heitzer, M.
A1  - Staat, Manfred
T1  - Direct FEM approach to design-by-analysis of pressurized components
N2  - Abstracts of the ACHEMA 2000 - International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, May 22 - 27, 2000. Frankfurt am Main. Achema 2000 : special edition / Linde. [Ed.: Linde AG. Red.: Volker R. Leski]. - Wiesbaden : Linde AG, 2000. - 56 p. : Ill., . - pp: 79 - 81
N2  - Abstracts der ACHEMA 2000 - International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, May 22 - 27, 2000. Frankfurt am Main.
KW  - Finite-Elemente-Methode
KW  - Finite-Elemente-Methode
KW  - limit analysis
KW  - shakedown analysis
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, M.
A1  - Hicken, E. F.
T1  - LISA, ein europäisches Projekt zur direkten Berechnung der Tragfähigkeit duktiler Strukturen
N2  - Traglast- und Einspielanalysen sind vereinfachte doch exakte Verfahren der Plastizität, die neben ausreichender Verformbarkeit keine einschränkenden Voraussetzungen beinhalten. Die Vereinfachungen betreffen die Beschaffung der Daten und Modelle für Details der Lastgeschichte und des Stoffverhaltens. Anders als die klassische Behandlung nichtlinearer Probleme der Strukturmechanik führt die Methode auf Optimierungsprobleme. Diese sind bei realistischen FEM-Modellen sehr groß. Das hat die industrielle Anwendung der Traglast- und Einspielanalysen stark verzögert. Diese Situation wird durch das Brite-EuRam Projekt LISA grundlegend geändert. Die Autoren möchten der Europäischen Kommission an dieser Stelle für die Förderung ausdrücklich danken. In LISA entsteht auf der Basis des industriellen FEM-Programms PERMAS ein Verfahren zur direkten Berechnung der Tragfähigkeit duktiler Strukturen. Damit kann der Betriebsbereich von Komponenten und Bauwerken auf den plastischen Bereich erweitert werden, ohne den Aufwand gegenüber elastischen Analysen wesentlich zu erhöhen. Die beachtlichen Rechenzeitgewinne erlauben Parameterstudien und die Berechnung von Interaktionsdiagrammen, die einen schnellen Überblick über mögliche Betriebsbereiche vermitteln. Es zeigt sich, daß abhängig von der Komponente und ihren Belastungen teilweise entscheidende Sicherheitsgewinne zur Erweiterung der Betriebsbereiche erzielt werden können. Das Vorgehen erfordert vom Anwender oft ein gewisses Umdenken. Es werden keine Spannungen berechnet, um damit Sicherheit und Lebensdauer zu interpretieren. Statt dessen berechnet man direkt die gesuchte Sicherheit. Der Post-Prozessor wird nur noch zur Modell- und Rechenkontrolle benötigt. Das Vorgehen ist änhlich der Stabilitätsanalyse (Knicken, Beulen). Durch namhafte industrielle Projektpartner werden Validierung und die Anwendbarkeit auf eine breite Palette technischer Probleme garantiert. Die ebenfalls in LISA geplante Zuverlässigkeitsanalyse ist erst auf der Basis direkter Verfahren effektiv möglich. Ohne Traglast- und Einspielanalyse ist plastische Strukturoptimierung auch heute kaum durchführbar.
KW  - Finite-Elemente-Methode
KW  - Traglastanalyse
KW  - Einspielanalyse
KW  - limit analysis
KW  - shakedown analysis
Y1  - 1998
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Direkte FEM-Berechnung der Tragfähigkeit hochbeanspruchter passiver Komponenten
T1  - Direct FEM-computation of load carrying capacity of highly loaded passive components
N2  - Genaue Kenntnis der Spannungen und Verformungen in passiven Komponenten gewinnt man mit detailierten inelastischen FEM Analysen. Die lokale Beanspruchung läßt sich aber nicht direkt mit einer Beanspruchbarkeit im strukturmechanischen Sinne vergleichen. Konzentriert man sich auf die Frage nach der Tragfähigkeit, dann vereinfacht sich die Analyse. Im Rahmen der Plastizitätstheorie berechnen Traglast- und Einspielanalyse die tragbaren Lasten direkt und exakt. In diesem Beitrag wird eine Implementierung der Traglast- und Einspielsätze in ein allgemeines FEM Programm vorgestellt, mit der die Tragfähigkeit passiver Komponenten direkt berechnet wird. Die benutzten Konzepte werden in Bezug auf die übliche Strukturanalyse erläutert. Beispiele mit lokal hoher Beanspruchung verdeutlichen die Anwendung der FEM basierten Traglast- und Einspielanalysen. Die berechneten Interaktionsdiagramme geben einen guten Überblick über die möglichen Betriebsbereiche passiver Komponenten. Die Traglastanalyse bietet auch einen strukturmechanischen Zugang zur Kollapslast rißbehafteter Komponenten aus hochzähem Material.
KW  - Finite-Elemente-Methode
KW  - Tragfähigkeit
KW  - FEM-Programm
KW  - FEM-computation
KW  - load carrying capacity
Y1  - 1997
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Limit and shakedown analysis for plastic design
N2  - Limit and shakedown theorems are exact theories of classical plasticity for the direct computation of safety factors or of the load carrying capacity under constant and varying loads. Simple versions of limit and shakedown analysis are the basis of all design codes for pressure vessels and pipings. Using Finite Element Methods more realistic modeling can be used for a more rational design. The methods can be extended to yield optimum plastic design. In this paper we present a first implementation in FE of limit and shakedown analyses for perfectly plastic material. Limit and shakedown analyses are done of a pipe–junction and a interaction diagram is calculated. The results are in good correspondence with the analytic solution we give in the appendix.
KW  - Einspielen <Werkstoff>
KW  - Traglast
KW  - Finite-Elemente-Methode
KW  - Traglastanalyse
KW  - Einspielanalyse
KW  - FEM
KW  - limit analysis
KW  - shakedown analysis
Y1  - 1997
ER  - 
TY  - CHAP
A1  - Lang, H.
A1  - Wirtz, K.
A1  - Heitzer, Michael
A1  - Staat, Manfred
A1  - Oettel, R.
T1  - Zyklische Einspielversuche zur Verifikation von Shakedown-Analysen mittels FEM
T1  - Cyclic plastic deformation test to verify FEM-based shakedown analysis
N2  - Im Rahmen von Ermüdungsanalysen ist nachzuweisen, daß die thermisch bedingten fortschreitenden Deformationen begrenzt bleiben. Hierzu ist die Abgrenzung des Shakedown-Bereiches (Einspielen) vom Ratchetting-Bereich (fortschreitende Deformation) von Interesse. Im Rahmen eines EU-geförderten Forschungsvorhabens wurden Experimente mit einem 4-Stab-Modell durchgeführt. Das Experiment bestand aus einem wassergekühlten inneren Rohr und drei isolierten und beheizbaren äußeren Probestäben. Das System wurde durch alternierende Axialkräfte, denen alternierende Temperaturen an den äußeren Stäben überlagert wurden, belastet. Die Versuchsparameter wurden teilweise nach vorausgegangenen Einspielanalysen gewählt. Während der Versuchsdurchführung wurden Temperaturen und Dehnungen zeitabhängig gemessen. Begleitend und nachfolgend zur Versuchsdurchführung wurden die Belastungen und die daraus resultierenden Beanspruchungen nachvollzogen. Bei dieser inkrementellen elasto-plastischen Analyse mit dem Programm ANSYS wurden unterschiedliche Werkstoffmodelle angesetzt. Die Ergebnisse dieser Simulationsberechnung dienen dazu, die Shakedown-Analysen mittels FE-Methode zu verifizieren.
KW  - Einspielen <Werkstoff>
KW  - Traglast
KW  - Finite-Elemente-Methode
KW  - Shakedown
KW  - shakedown analysis
KW  - plastic deformation
Y1  - 1999
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
A1  - Hicken, E. F.
T1  - LISA - ein europäisches Projekt zur FEM-basierten Traglast- und Einspielanalyse
T1  - LISA - a European project for FEM-based limit and shakedown analysis
N2  - Traglast- und Einspielanalysen sind vereinfachte doch exakte Verfahren der Plastizität, die neben ausreichender Verformbarkeit keine einschränkenden Voraussetzungen beinhalten. Die Vereinfachungen betreffen die Beschaffung der Daten und Modelle für Details der Lastgeschichte und des Stoffverhaltens. Anders als die klassische Behandlung nichtlinearer Probleme der Strukturmechanik führt die Methode auf Optimierungsprobleme. Diese sind bei realistischen FEM-Modellen sehr groß. Das hat die industrielle Anwendung der Traglast- und Einspielanalysen stark verzögert. Diese Situation wird durch das Brite-EuRam Projekt LISA grundlegend geändert. In LISA entsteht auf der Basis des industriellen FEM-Programms PERMAS ein Verfahren zur direkten Berechnung der Tragfähigkeit duktiler Strukturen. Damit kann der Betriebsbereich von Komponenten und Bauwerken auf den plastischen Bereich erweitert werden, ohne den Aufwand gegenüber elastischen Analysen wesentlich zu erhöhen. Die beachtlichen Rechenzeitgewinne erlauben Parameterstudien und die Berechnung von Interaktionsdiagrammen, die einen schnellen Überblick über mögliche Betriebsbereiche vermitteln. Es zeigt sich, daß abhängig von der Komponente und ihren Belastungen teilweise entscheidende Sicherheitsgewinne zur Erweiterung der Betriebsbereiche erzielt werden können. Das Vorgehen erfordert vom Anwender oft ein gewisses Umdenken. Es werden keine Spannungen berechnet, um damit Sicherheit und Lebensdauer zu interpretieren. Statt dessen berechnet man direkt die gesuchte Sicherheit. Der Post-Prozessor wird nur noch zur Modell- und Rechenkontrolle benötigt. Das Vorgehen ist ähnlich der Stabilitätsanalyse (Knicken, Beulen). Durch namhafte industrielle Projektpartner werden Validierung und die Anwendbarkeit auf eine breite Palette technischer Probleme garantiert. Die ebenfalls in LISA entwickelten Zuverlässigkeitsanalysen sind nichlinear erst auf der Basis direkter Verfahren effektiv möglich. Ohne Traglast- und Einspielanalyse ist plastische Strukturoptimierung auch heute kaum durchführbar. Auf die vorgesehenen Erweiterungen der Werkstoffmodellierung für nichtlineare Verfestigung und für Schädigung konnte hier nicht eingegangen werden. Es herrscht ein deutlicher Mangel an Experimenten zum Nachweis der Grenzen zwischen elastischem Einspielen und dem Versagen durch LCF oder durch Ratchetting.
KW  - Einspielen <Werkstoff>
KW  - Traglast
KW  - Finite-Elemente-Methode
KW  - LISA
KW  - limit analysis
KW  - shakedown analysis
Y1  - 1999
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
A1  - Reinders, H.
A1  - Schubert, F.
T1  - Einspielen und Ratchetting bei Zug- und Torsionsbelastung: Analyse und Experimente
T1  - Shakedown and ratchetting under tension-torsion loadings: analysis and experiments
N2  - Traglast- und Einspielanalysen sind vereinfachte doch exakte Verfahren der klassischen Plastizitätstheorie, die neben ausreichender Verformbarkeit keine einschränkenden Voraussetzungen beinhalten. Die Vereinfachungen betreffen die Beschaffung der Daten und Modelle für Details der Lastgeschichte und des Stoffverhaltens. Eine FEM-basierte Traglast- und Einspielanalyse für ideal plastisches Material wurde auf ein kinematisch verfestigendes Materialgesetz erweitert und in das Finite Element Programm PERMAS implementiert. In einem einfachen Zug-Torsionsexperiment wurde eine Hohlprobe mit konstanter Torsion und zyklischer Zugbelastung beansprucht, um die neue Implementierung zu verifizieren. Es konnte gezeigt werden, dass die Einspielanalyse gut mit den experimentellen Ergebnissen übereinstimmt. Bei Verfestigung lassen sich wesentlich größere Sicherheiten nachweisen. Dieses Potential bedarf weiterer experimenteller Absicherung. Parallel dazu ist die Eisnpieltheorie auf fortschrittliche Verfestigungsansätze zu erweitern.
KW  - Zug-Druck-Beanspruchung
KW  - Einspielen <Werkstoff>
KW  - Ratcheting
KW  - Torsion
KW  - Zug-Druck-Belastung
KW  - Torsionsbelastung
KW  - shakedown
KW  - ratchetting
KW  - tension–torsion loading
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Dikta, Gerhard
T1  - Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies
N2  - In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.
KW  - Blitzschutz
KW  - lightning flash
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Ballmann, J.
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
T1  - High stress intensities in focussing zones of waves
N2  - The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.
KW  - Technische Mechanik
KW  - Wellen
KW  - mechanical waves
Y1  - 1985
U6  - http://dx.doi.org/10.1016/B978-0-444-42520-1.50015-3
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>: Proceedings book ; Tunisia, November, 13 & 14, 2009 / Humboldt Kolleg. Ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - The ANM’09 multi-disciplinary scientific program includes topics in the fields of "Nanotechnology and Microelectronics" ranging from "Bio/Micro/Nano Materials and Interfacing" aspects, "Chemical and Bio-Sensors", "Magnetic and Superconducting Devices", "MEMS and Microfluidics" over "Theoretical Aspects, Methods and Modelling" up to the important bridging "Academics meet Industry".
KW  - Nanopartikel
KW  - Biosensor
KW  - Supraleiter
KW  - MEMS
KW  - Biophoton
KW  - Nanotechnology ; Microelectronics ; Biosensors ; Superconductor ; MEMS
Y1  - 2009
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3113
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Meyer, Oliver
A1  - Nagl, Manfred
T1  - Graph technology support for conceptual design in civil engineering
N2  - In: Advances in intelligent computing in engineering : proceedings of the 9.International EG-ICE Workshop ; Darmstadt, (01 - 03 August) 2002 / Martina Schnellenbach-Held ... (eds.) . - Düsseldorf: VDI-Verl., 2002 .- Fortschritt-Berichte VDI, Reihe 4, Bauingenieurwesen ; 180 ; S. 1-35 The paper describes a novel way to support conceptual design in civil engineering. The designer uses semantical tools guaranteeing certain internal structures of the design result but also the fulfillment of various constraints. Two different approaches and corresponding tools are discussed: (a) Visually specified tools with automatic code generation to determine a design structure as well as fixing various constraints a design has to obey. These tools are also valuable for design knowledge specialist. (b) Extensions of existing CAD tools to provide semantical knowledge to be used by an architect. It is sketched how these different tools can be combined in the future. The main part of the paper discusses the concepts and realization of two prototypes following the two above approaches. The paper especially discusses that specific graphs and the specification of their structure are useful for both tool realization projects.
KW  - CAD
KW  - CAD ;
KW  - CAD
KW  - civil engineering
Y1  - 2002
SN  - 3-18-318004-9
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Nagl, Manfred
T1  - Support of Conceptual Design in Civil Engineering by Graph-based Tools
N2  - WS GTaD-2003 - The 1st Workshop on Graph Transformations and Design ed Grabska, E., Seite 6-7, Jagiellonian University Krakow. 2 pages
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Nagl, Manfred
T1  - Parameterized specification of conceptual design tools in civil engineering
N2  - Applications of Graph Transformations with Industrial Relevance Lecture Notes in Computer Science, 2004, Volume 3062/2004, 90-105, DOI: 10.1007/978-3-540-25959-6_7 In this paper we discuss how tools for conceptual design in civil engineering can be developed using graph transformation specifications. These tools consist of three parts: (a) for elaborating specific conceptual knowledge (knowledge engineer), (b) for working out conceptual design results (architect), and (c) automatic consistency analyses which guarantee that design results are consistent with the underlying specific conceptual knowledge. For the realization of such tools we use a machinery based on graph transformations. In a traditional PROGRES tool specification the conceptual knowledge for a class of buildings is hard-wired within the specification. This is not appropriate for the experimentation platform approach we present in this paper, as objects and relations for conceptual knowledge are due to many changes, implied by evaluation of their use and corresponding improvements. Therefore, we introduce a parametric specification method with the following characteristics: (1) The underlying specific knowledge for a class of buildings is not fixed. Instead, it is built up as a data base by using the knowledge tools. (2) The specification for the architect tools also does not incorporate specific conceptual knowledge. (3) An incremental checker guarantees whether a design result is consistent with the current state of the underlying conceptual knowledge (data base).
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
T1  - Conceptual design tools for civil engineering
N2  - Applications of Graph Transformations with Industrial Relevance Lecture Notes in Computer Science, 2004, Volume 3062/2004, 434-439, DOI: http://dx.doi.org/10.1007/978-3-540-25959-6_33 This paper gives a brief overview of the tools we have developed to support conceptual design in civil engineering. Based on the UPGRADE framework, two applications, one for the knowledge engineer and another for architects allow to store domain specific knowledge and to use this knowledge during conceptual design. Consistency analyses check the design against the defined knowledge and inform the architect if rules are violated.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Novacek, V.
A1  - Tolba, R.
A1  - Klinge, U.
A1  - Turquier, F.
A1  - Staat, Manfred
T1  - Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011
N2  - Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.
KW  - Anastomose
KW  - Finite-Elemente-Methode
KW  - Biomechanik
KW  - Anastomosis
KW  - Finite element method
KW  - Biomechanics
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia>  ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW  - Biosensor
KW  - Nanotechnologie
KW  - Nanomaterial
KW  - Nano Materials
KW  - Bio-Sensors
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Nagl, Manfred
T1  - Semantic tool support for conceptual design
N2  - ITCE-2003 - 4th Joint Symposium on Information Technology in Civil Engineering ed Flood, I., Seite 1-12, ASCE (CD-ROM), Nashville, USA In this paper we discussed graph based tools to support architects during the conceptual design phase. Conceptual Design is defined before constructive design; the used concepts are more abstract. We develop two graph based approaches, a topdown using the graph rewriting system PROGRES and a more industrially oriented approach, where we extend the CAD system ArchiCAD. In both approaches, knowledge can be defined by a knowledge engineer, in the top-down approach in the domain model graph, in the bottom-up approach in the in an XML file. The defined knowledge is used to incrementally check the sketch and to inform the architect about violations of the defined knowledge. Our goal is to discover design error as soon as possible and to support the architect to design buildings with consideration of conceptual knowledge.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, N.
T1  - Interactive distributed knowledge support for conceptual building design
N2  - In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
SN  - 3-86068-213-X
ER  - 
TY  - CHAP
A1  - Kirchhof, M.
A1  - Kraft, Bodo
T1  - UML-based modeling of architectural knowledge and design
N2  - IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect’s sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.
KW  - UML
KW  - UML
KW  - Unified Modeling Language
KW  - UML
KW  - Unified Modeling Language
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Schneider, Gerd
T1  - Semantic Roomobjects for Conceptual Design Support : A Knowledge-based Approach
N2  - In: Computer Aided Architectural Design Futures 2005 2005, Part 4, 207-216, DOI: http://dx.doi.org/10.1007/1-4020-3698-1_19 The conceptual design at the beginning of the building construction process is essential for the success of a building project. Even if some CAD tools allow elaborating conceptual sketches, they rather focus on the shape of the building elements and not on their functionality. We introduce semantic roomobjects and roomlinks, by way of example to the CAD tool ArchiCAD. These extensions provide a basis for specifying the organisation and functionality of a building and free architects being forced to directly produce detailed constructive sketches. Furthermore, we introduce consistency analyses of the conceptual sketch, based on an ontology containing conceptual relevant knowledge, specific to one class of buildings.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
SN  - 978-1-4020-3460-2
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, Nils
T1  - Visual Knowledge Specification for Conceptual Design
N2  - Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Operationale Semantikdefinition für konzeptuelles Regelwissen
N2  - In: Forum Bauinformatik 2005 : junge Wissenschaftler forschen / [Lehrstuhl Bauinformatik, Brandenburgische Technische Universität Cottbus. Frank Schley ... (Hrsg.)]. - Cottbus : Techn. Universität 2005. S. 1-10 ISBN 3-934934-11-0 
Mittels eines operationalen Ansatzes zur Semantikdefinition wird am Bei-spiel des konzeptuellen Gebäudeentwurfs ein Regelsystem formalisiert. Dazu werdenzwei Teile, zum einen das Regelwissen, zum anderen ein konzeptueller Entwurfsplan zunächst informell eingeführt und dann formal beschrieben. Darauf aufbauend wird die Grundlage für eine Konsistenzprüfung des konzeptuellen Entwurfs gegen das Regel-wissen formal angeben
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Graph Transformations for Dynamic Knowledge Processing
N2  - In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. HICSS '06 http://dx.doi.org/10.1109/HICSS.2006.200 The conceptual design phase at the beginning of the building construction process is not adequately supported by any CAD-tool. Conceptual design support needs regarding two aspects: first, the architect must be able to develop conceptual sketches that provide abstraction from constructive details. Second, conceptually relevant knowledge should be available to check these conceptual sketches. The paper deals with knowledge to formalize for conceptual design. To enable domain experts formalizing knowledge, a graph-based specification is presented that allows the development of a domain ontology and design rules specific for one class of buildings at runtime. The provided tool support illustrates the introduced concepts and demonstrates the consistency analysis between knowledge and conceptual design.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2  - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Biophysical and Engineering Contributions to Plant Research
N2  - Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in–situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.
KW  - Pflanzenphysiologie
KW  - Dattel
KW  - Pflanzenscanner
KW  - plant scanner
KW  - date palm tree
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Xu, Changsheng
A1  - Feldmann, Marco
A1  - Plescher, Engelbert
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Development and testing of a subsurface probe for detection of life in deep ice : [abstract]
N2  - We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named “IceMole”, is currently developed, built, and tested at the FH Aachen University of Applied Sciences’ Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).
KW  - Eisschicht
KW  - Sonde
KW  - subsurface probe
KW  - subsurface ice research
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Kurulgan Demirci, Eylem
A1  - Linder, Peter
A1  - Demirci, Taylan
A1  - Gierkowski, Jessica R.
A1  - Digel, Ilya
A1  - Gossmann, Matthias
A1  - Temiz Artmann, Aysegül
T1  - rhAPC reduces the endothelial cell permeability via a decrease of cellular mechanical contractile tensions : [abstract]
N2  - In this study, the CellDrum technology quanitfying cellular mechanical tension on a pico-scale was used to investigate the effect of LPS (lipopolysaccharide) on HAoEC (Human Aortic Endothelial Cell) tension.
KW  - Endothelzelle
KW  - Sepsis
KW  - kontraktile Spannung
KW  - rhAPC
KW  - contractile tension
KW  - rhAPC
KW  - celldrum technology
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zaccai, Giuseppe
A1  - Büldt, Georg
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - The crucial role of water in a phase transition of hemoglobin at body temperature : [abstract]
N2  - The observation of a temperature transition of hemoglobin occurring at a critical temperature close to body temperature
KW  - Hämoglobin
KW  - Erythrozyt
KW  - Körpertemperatur
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
A1  - Nojima, H.
T1  - Plasma cluster ions (PCI) influence on microbial cells viability : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first “Plasma Cluster Ions (PCI)” air purification technology, which uses plasma discharge to generate cluster ions. The new plasma cluster device releases into the air positive and negative ions, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. A lot of phenomenological tests of the PCI air purification technology on microbial cells have been conducted. And, in most cases, it has been shown that PCI demonstrate strongly pronounced killing effect. Although, the particular mechanisms of PCI action are still not evident. We studied variations in resistance to PCI among gram-positive airborne microorganisms, as well as some dose-dependent, spatial, cultural and biochemical properties of PCI action in respect of Staphylococcus spp, Enterococcus spp, Micrococcus spp.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Effects of plasma generated ions on bacteria : [poster]
N2  - Summary and Conclusions PCIs were clearly effective in terms of their antibacterial effects with the strains tested. This efficacy increased with the time the bacteries were exposed to PCIs. The bactericidal action has proved to be irreversible. PCIs were significantly less effective in shadowed areas. PCI exposure caused multiple protein damages as observed in SDS PAGE studies. There was no single but multiple molecular mechanism causing the bacterial death.
KW  - Clusterion
KW  - Bakterien
KW  - plasma generated ions
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]
N2  - Recently, the SHARP Corporation, Japan, has developed the world’s first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Leimena, W.
A1  - Dachwald, Bernd
A1  - Linder, Peter
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Funke, O.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - In-situ biological decontamination of an ice melting probe : [abstract]
N2  - The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.
KW  - Sonde
KW  - Dekontamination
KW  - Wasserstoffperoxid
KW  - Natriumhypochlorit
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Arinkin, Vladimir
A1  - Digel, Ilya
T1  - Water bridge phenomenon : [abstract]
N2  - One of interesting but not well known water properties is related to appearance of highly ordered structures in response to strong electrical field. In 1893 Sir William Armstrong placed a cotton thread between two wine glasses filled with chemically pure water. When high DC voltage was applied between the glasses, a connection consisting of water formed, producing a "water bridge"
KW  - Hydrodynamik
KW  - Elektrodynamik
KW  - Wasserbrücke
KW  - water bridge phenomenon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - ElBashir, Rasha
A1  - Digel, Ilya
T1  - Effect of nitric oxide gas on hydrogels : [abstract]
N2  - The results support our theory that the NO gas has an influence in increasing the translational diffusion of hydrogels and it accelerates the melting process of the gels.
KW  - Stickstoffmonoxid
KW  - Hydrogel
KW  - nitric oxide gas
KW  - hydrogel
Y1  - 2009
ER  - 
TY  - CHAP
A1  - O\'Heras, Carlos
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - Nanostructured carbon-based column for LPS/protein adsorption : [abstract]
N2  - The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).
KW  - Kohlenstofffaser
KW  - Adsorption
KW  - Lipopolysaccharide
KW  - aktivierte nanostrukturierte Kohlenstofffaser
KW  - lipopolysaccharides
KW  - activated nanostructured carbon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Bassam, Rasha
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Effect of nitric oxide on protein thermal stability : [abstract]
N2  - As a deduction from these results, we can conclude that proteins mainly in vitro, denaturate totally at a temperature between 57°C -62°C, and they also affected by NO and different ions types. In which mainly, NO cause earlier protein denaturation, which means that, NO has a destabilizing effect on proteins, and also different ions will alter the protein denaturation in which, some ions will cause earlier protein denaturation while others not.
KW  - Stickstoffmonoxid
KW  - Proteine
KW  - Hämoglobin
KW  - nitric oxide gas
KW  - protein
KW  - hemoglobin
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Dachwald, Bernd
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Funke, O.
T1  - A concept of a probe for particle analysis and life detection in icy environments
N2  - A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa’s ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.
KW  - Sonde
KW  - Eisschicht
KW  - Autofluoreszenzverfahren
KW  - Lichtstreuungsbasierte Instrumente
KW  - autofluorescence-based detection system
KW  - light scattering analysis
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Savitskaja, Irina S.
A1  - Kozhalakova, A. A.
A1  - Kistaubaeva, Aida S.
T1  - The sorption of LPS toxic shock by nanoparticles on base of carbonized vegetable raw materials
N2  - Immobilization of lactobacillus on high temperature carbonizated vegetable raw material (rice husk, grape stones) increases their physiological activity and the quantity of the antibacterial metabolits, that consequently lead to increase of the antagonistic activity of lactobacillus. It is implies that the use of the nanosorbents for the attachment of the probiotical microorganisms are highly perspective for decision the important problems, such as the probiotical preparations delivery to the right address and their attachment to intestines mucosa with the following detoxication of gastro-intestinal tract and the normalization of it’s microecology. Besides that, thus, the received carbonizated nanoparticles have peculiar properties – ability to sorption of LPS toxical shock and, hence, to the detoxication of LPS.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zerlin, Kay
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Zaccai, Joe
A1  - Büldt, Georg
T1  - Temperature transitions of hemoglobin and cytosolic water diffusion in human red blood cells : [poster]
N2  - Background Hemoglobin interactions in red blood cells Hemoglobin dynamics in human red blood cells Diffusion of H2O in red blood cells
KW  - Erythrozyt
KW  - Hämoglobin
KW  - cytosolic water diffusion
KW  - hemoglobin dynamics
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Demirci, Taylan
A1  - Trzewik, Jürgen
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Fibroblast response to mechanical stress: role of the adhesion substrate : [abstract]
N2  - Mechanical stimulation of the cells resulted in evident changes in the cell morphology, protein composition and gene expression. Microscopically, additional formation of stress fibers accompanied by cell re-arrangements in a monolayer was observed. Also, significant activation of p53 gene was revealed as compared to control. Interestingly, the use of CellTech membrane coating induced cell death after mechanical stress had been applied. Such an effect was not detected when fibronectin had been used as an adhesion substrate.
KW  - Fibroblast
KW  - Mechanische Beanspruchung
KW  - celldrum technology
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Plasma-generated cluster ions' effects on indoor microflora : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first "Plasma Cluster Ions® (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new Plasma Cluster Device releases positive and negative ions into the air, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. In the past, phenomenological tests on the efficacy of the PCI air purification technology on microbial cells have been conducted. In most cases, it has been shown that PCI demonstrated strongly pronounced killing effects on microorganisms. However, the particular mechanisms of PCI action still have to be uncovered.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Burgazzi, L.
A1  - Fiorini, F.
A1  - De Magistris, W. (u.a.)
A1  - Lensa, W. von
A1  - Staat, Manfred
A1  - Altes, J.
T1  - Reliability Assessment of Passive Safety Systems
T2  - Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.
Y1  - 1998
N1  - CD-ROM
PB  - American Society of Mechanical Engineers
CY  - New York
ER  - 
TY  - CHAP
A1  - Groebel, Simone
A1  - Werner, Frederik
A1  - Jörres, Niklas
A1  - Jansen, F.
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Sprenger, B.
A1  - Baumann, Marcus
A1  - Schöning, Michael Josef
A1  - Selmer, Thorsten
T1  - Entwicklung einer Sensor-Überwachung für Biogasanlagen auf Basis von Prozessdaten einer Parallelanlage
T2  - 10. Dresdner Sensor-Symposium : Dresden, 5. - 7. Dezember 2011 ; miniaturisierte analytische Verfahren, Hochtemperatur-Sensoren, Sensoren für Bioprozess- und Verfahrenstechnik, Sensoren für die Medizin, Chemische Verfahrenstechnik, Lebensmittelanalytik, innovative Sensorlösungen, Sensoren für die Wasserqualität, Selbstüberwachung / Gerald Gerlach ... (Hg.)
N2  - Beim Ausbau nachhaltiger, regenerativer Energieversorgung hat die Umwandlung von organischer Biomasse in Biogas ein großes Potential. Der zugrundeliegende, komplexe biologische Prozess wird noch immer unzureichend verstanden und bedarf systematischer Untersuchungen der Prozessparameter, um einen hohen Ertrag bei guter Gasqualität zu ermöglichen. Die Fragestellungen zur Entschlüsselung des Prozesses sind sowohl verfahrenstechnischer als auch mikrobiologischer Natur. Aus mikrobiologischer Sicht ist die Kenntnis der tatsächlich beteiligten prozesstragenden Mikroorganismen von erheblicher Bedeutung, aus verfahrenstechnischer Sicht die Kenntnis der physikalischen und chemischen Faktoren, welche die mikrobiologischen Prozesse und kontrollieren. Im Zusammenspiel aller dieser Parameter wird die Biogasbildung befördert oder behindert, bis zum Abbruch des Prozesses.
Eine mögliche Kontrollmethode ist die Messung der metabolischen Aktivität prozesstragender Organismen.
Diese soll, beruhend auf fundierten Prozessdaten, gewonnen durch eine Parallelanlage, mit einem lichtadressierbaren potentiometrischen Sensor-System (LAPS) realisiert werden. Dieser Sensor ist in der Lage, pH-Wert-änderungen zu detektieren, die durch den Stoffwechsel der auf dem Chip immobilisierten Organismen hervorgerufen werden, um eine Online-Überwachung von Biogasanlagen zu ermöglichen.
Y1  - 2011
SN  - 978-3-942710-53-4
U6  - http://dx.doi.org/10.5162/10dss2011/4.3
N1  - Dresdner Beiträge zur Sensorik 43 ;
Dresdner Sensor-Symposium ; 10 ; 2011 ; Dresden ; Forschungsgesellschaft für Messtechnik, Sensorik und Medizintechnik ; Zehntes Dresdner Sensor-Symposium ; Dresdner Sensor-Symposium ; (10 ; 2011.12.05-07 ; Dresden)
SP  - 81
EP  - 84
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Dehnhardt, W.
A1  - Mills, J. S.
T1  - Levels in the closed neutron shell nucleus ¹⁴² Nd
T2  - International Symposium on Highly Excited States in Nuclei held at Jülich from 23-26 September 1975 : proceedings; Vol. 1 Contributed papers
Y1  - 1975
N1  - International Symposium on Highly Excited States in Nuclei <1975, Jülich> ;  European Physical Society ; Institut für Kernphysik <Jülich>
SP  - 51
PB  - Verlag des Forschungszentrums Jülich
CY  - Jülich
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Neskakis, A.
A1  - Lieder, R. M.
A1  - Beuscher, H.
T1  - Study of rotational aligned bands in ¹⁹⁰,¹⁹²,¹⁹⁴ Au
T2  - Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)
Y1  - 1978
SN  - 978-3-540-09102-8
N1  - Australian Academy of Science <Canberra> ; International Conference on Nuclear Interactions <1978, Canberra>
SP  - 428
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Peters, H.
A1  - Ziemons, Karl
A1  - Dammers, J.
A1  - Müller-Veggian, Mattea
ED  - Nenonen, Jukka
T1  - Continuous head motion detection during MEG measurement using head location coils
T2  - Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland
Y1  - 2001
SN  - 951-22-5401-8
N1  - Biomag <12, 2000, Espoo> ; Teknillinen Korkeakoulu <Helsinki> ; International Conference on Biomagnetism <12, 2000, Espoo>
PB  - Helsinki Univ. of Technology, Laboratory of Biomedical Engineering
CY  - Espoo
ER  -