TY  - CHAP
A1  - Mansurov, Zulkhair
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Savitskaja, Irina S.
A1  - Kozhalakova, A. A.
A1  - Kistaubaeva, Aida S.
T1  - The sorption of LPS toxic shock by nanoparticles on base of carbonized vegetable raw materials
N2  - Immobilization of lactobacillus on high temperature carbonizated vegetable raw material (rice husk, grape stones) increases their physiological activity and the quantity of the antibacterial metabolits, that consequently lead to increase of the antagonistic activity of lactobacillus. It is implies that the use of the nanosorbents for the attachment of the probiotical microorganisms are highly perspective for decision the important problems, such as the probiotical preparations delivery to the right address and their attachment to intestines mucosa with the following detoxication of gastro-intestinal tract and the normalization of it’s microecology. Besides that, thus, the received carbonizated nanoparticles have peculiar properties – ability to sorption of LPS toxical shock and, hence, to the detoxication of LPS.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mikucki, Jill A.
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Xu, Changsheng
T1  - IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems
N2  - The ”IceMole“ is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences’ Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe’s potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.
KW  - Eisschicht
KW  - Sonde
KW  - subsurface ice
KW  - subglacial aquatic ecosystems
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Braun, Carsten
A1  - Boller, Christian
ED  - Casciati, Fabio
T1  - Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft
T2  - Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]
Y1  - 2010
SN  - 978-1-60595-024-2
SP  - 55
EP  - 63
PB  - DEStech Publ.
CY  - Lancaster, Pa.
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Effects of plasma generated ions on bacteria : [poster]
N2  - Summary and Conclusions PCIs were clearly effective in terms of their antibacterial effects with the strains tested. This efficacy increased with the time the bacteries were exposed to PCIs. The bactericidal action has proved to be irreversible. PCIs were significantly less effective in shadowed areas. PCI exposure caused multiple protein damages as observed in SDS PAGE studies. There was no single but multiple molecular mechanism causing the bacterial death.
KW  - Clusterion
KW  - Bakterien
KW  - plasma generated ions
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Herčík, David
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron D
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - Maiwald, Volker
A1  - Mikschl, Tobias
A1  - Mikulz, Eugen
A1  - Montenegro, Sergio
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Tardivel, Simon
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Small spacecraft based multiple near-earth asteroid rendezvous and landing with near-term solar sails and ‘Now-Term ‘technologies
T2  - 69 th International Astronautical Congress (IAC)
N2  - Physical interaction with small solar system bodies (SSSB) is the next step in planetary science, planetary in-situ resource utilization (ISRU), and planetary defense (PD). It requires a broader understanding of the surface properties of the target objects, with particular interest focused on those near Earth. Knowledge of composition, multi-scale surface structure, thermal response, and interior structure is required to design, validate and operate missions addressing these three fields. The current level of understanding is occasionally simplified into the phrase, ”If you’ve seen one asteroid, you’ve seen one asteroid”, meaning that the in-situ characterization of SSSBs has yet to cross the threshold towards a robust and stable scheme of classification. This would enable generic features in spacecraft design, particularly for ISRU and science missions. Currently, it is necessary to characterize any potential target object sufficiently by a dedicated pre-cursor mission to design the mission which then interacts with the object in a complex fashion. To open up strategic approaches, much broader in-depth characterization of potential target objects would be highly desirable. In SSSB science missions, MASCOT-like nano-landers and instrument carriers which integrate at the instrument level to their mothership have met interest. By its size, MASCOT is compatible with small interplanetary missions. The DLR-ESTEC Gossamer Roadmap Science Working Groups‘ studies identified Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the space science missions only feasible with solar sail propulsion. The Solar Polar Orbiter (SPO) study showed the ability to access any inclination, theDisplaced-L1 (DL1) mission operates close to Earth, where objects of interest to PD and for ISRU reside. Other studies outline the unique capability of solar sails to provide access to all SSSB, at least within the orbit of Jupiter, and significant progress has been made to explore the performance envelope of near-term solar sails for MNR. However, it is difficult for
sailcraft to interact physically with a SSSB. We expand and extend the philosophy of the recently qualified DLR Gossamer solar sail deployment technology using efficient multiple sub-spacecraft integration to also include landers for one-way in-situ investigations and sample-return missions by synergetic integration and operation of sail and lander. The MASCOT design concept and its characteristic features have created an ideal counterpart for thisand has already been adapted to the needs of the AIM spacecraft, former part of the NASA-ESA AIDA missionDesigning the 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018. IAC-18-F1.2.3 Page 2 of 17 combined spacecraft for piggy-back launch accommodation enables low-cost massively parallel access to the NEA population.
KW  - multiple NEA rendezvous
KW  - solar sail
KW  - GOSSAMER-1
KW  - MASCOT
KW  - small spacecraft
Y1  - 2018
N1  - 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018.
https://www.bho-legal.com/1-5-october-2018-69th-international-astronautical-congress-2018-in-bremen-germany/
SP  - 1
EP  - 18
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
ED  - Klinkel, Sven
ED  - Butenweg, Christoph
ED  - Lin, Gao
ED  - Holtschoppen, Britta
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities
N2  - Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation
Y1  - 2013
SN  - 978-3-658-02810-7
SN  - 978-3-658-02809-1
SN  - 978-3-658-14037-3
U6  - https://doi.org/10.1007/978-3-658-02810-7_36
N1  - International Conference on Seismic Design of Industrial Facilities, Aachen, Germany, 26.-27.09.2013.
https://sedif-conference.jimdofree.com/
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Modellierung eines basisisolierten, zylindrischen Flüssigkeitstanks aus Stahl
T2  - 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, Österreich
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
T1  - Solare-Prozesswärme-Standards (Sol-Pro-St)
T2  - Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein
Y1  - 2010
SN  - 978-3-941785-29-8
SP  - 182
EP  - 187
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
T1  - Simulation von Impact Belastungen auf Stahlbetonstrukturen
T2  - 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, Österreich
Y1  - 2013
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kuhlmann, Winfried
A1  - Lopez, M.
A1  - Fernandez, S.
T1  - Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations
T2  - International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003
Y1  - 2003
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Sadegh-Azar, H.
A1  - Meskouris, Konstantin
T1  - Seismische Vulnerabilität von bestehenden Bauwerken
T2  - 5. Forum und Gefahrentag : auf der Suche nach dem Risiko : ein aktuelles Symposium zu Fragen der Risikowahrnehmung und Katastrophenvorsorge in Deutschland, ZDF Mainz Lerchenberg, 13. - 14. Oktober, 2004
Y1  - 2004
SP  - 1
ER  - 
TY  - CHAP
A1  - Wagner, R.
A1  - Noh, S.-Y.
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic excited granular material silos
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...
Y1  - 2002
SN  - 90-5809-511-8
SP  - 253
EP  - 258
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Rosin, Julia
T1  - Seismic analysis of liquid storage tanks
T2  - Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Grützner ; R. Pérez-Lopez ; T. Fernández Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. Vött. Volume 2
Y1  - 2011
SN  - 978-960-466-093-3
SP  - 136
EP  - 139
PB  - The Natural hazards Laboratory, National and Kapodistrian University of Athens
CY  - Athens
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Park, Jin
T1  - Verhalten von Ankerschienensystemen unter statisch zyklischen Beanspruchungen
T2  - 12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt für Geowissenschaften und Rohstoffe. C. Könke (Hrsg.)
Y1  - 2011
SN  - 3-930108-11-9
SP  - 349
EP  - 365
CY  - Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Karadogan, Faruk
T1  - Numerical investigation of AAC wall panels based on the damage plasticity constitutive law
T2  - Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011
Y1  - 2011
SN  - 1425-8129
SP  - 86
EP  - 91
PB  - Stowarzyszenie Producentów Cementu i Wapna
CY  - Krakow
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - https://doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Plasma-generated cluster ions' effects on indoor microflora : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first "Plasma Cluster Ions® (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new Plasma Cluster Device releases positive and negative ions into the air, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. In the past, phenomenological tests on the efficacy of the PCI air purification technology on microbial cells have been conducted. In most cases, it has been shown that PCI demonstrated strongly pronounced killing effects on microorganisms. However, the particular mechanisms of PCI action still have to be uncovered.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
T1  - Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung
T2  - D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna
Y1  - 2007
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Krämer, Sebastian
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers
T2  - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ...
Y1  - 2005
SN  - 978-963-8241-68-9
SP  - 2759
EP  - 2764
PB  - OPAKFI Tud. Egyesület
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - https://doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Baudynamische Untersuchung von Brückenbauwerken im Kölner Raum
T2  - Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)
Y1  - 2006
SN  - 3-18-091941-8
SP  - 121
EP  - 140
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - Mauerwerksbauten unter Erdbebenbelastung
T2  - Numerische Methoden zur Problemlösung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006
Y1  - 2006
PB  - IBAC
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Kuhlmann, Wolfram
A1  - Butenweg, Christoph
A1  - Lopez, Marijen
A1  - Fernandez, Sebastian
T1  - Seismic vulnerability assessment of the historic Aachen Cathedral
T2  - Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]
Y1  - 2004
SP  - 1
EP  - 14
PB  - CAEE
CY  - Vancouver
ER  - 
TY  - CHAP
A1  - Kuhlmann, Wolfram
A1  - Butenweg, Christoph
A1  - Bettzieche, Volker
A1  - Meskouris, Konstantin
T1  - Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren des Ruhrverbandes
T2  - 13. Deutsches Talsperrensymposium in Weimar
Y1  - 2004
SP  - 1
EP  - 26
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Bettzieche, Volker
A1  - Kuhlmann, Wolfram
A1  - Meskouris, Konstantin
T1  - Die baudynamische Beurteilung von Talsperren am Beispiel der Fürwiggetalsperre
T2  - Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. März 2005 in Dresden / Institut für Statik und Dynamik der Tragwerke, TU Dresden, Deutschland
Y1  - 2005
SN  - 3-00-015456-6
SP  - 73
EP  - 84
PB  - Inst. für Statik und Dynamik der Tragwerke
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Mistler, Michael
A1  - Kuhlmann, Wolfram
T1  - Seismic behaviour of historic masonry buildings
T2  - 7th National Congress on Mechanics : Chania, Crete, June 24 - 26, 2004 ; proceedings / ed. A. Kounadis ....
Y1  - 2004
SP  - 47
EP  - 49
PB  - Hellenic Society for Theoretical and Applied Mechanics
CY  - Chania
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Weber, Jannik
T1  - What drives the purchase decision in Instagram stores?
T2  - ECIS 2023 Research Papers
N2  - The popularity of social media and particularly Instagram grows steadily. People use the different platforms to share pictures as well as videos and to communicate with friends. The potential of social media platforms is also being used for marketing purposes and for selling products. While for Facebook and other online social media platforms the purchase decision factors are investigated several times, Instagram stores remain mainly unattended so far. The present research work closes this gap and sheds light into decisive factors for purchasing products offered in Instagram stores. A theoretical research model, which contains selected constructs that are assumed to have a significant influence on Instagram user´s purchase intention, is developed. The hypotheses are evaluated by applying structural equation modelling on survey data containing 127 relevant participants. The results of the study reveal that ‘trust’, ‘personal recommendation’, and ‘usability’ significantly influences user’s buying intention in Instagram stores.
KW  - Instagram store
KW  - shopping behavior
KW  - purchase factor
KW  - PLS
KW  - structural equation model
Y1  - 2023
N1  - ECIS 2023, European Conference on Information Systems, Kristiansand, Norway, June 11.-16.
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
T2  - Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference
N2  - Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the surrounding RC frame performed rather poor in past earthquakes. Masonry infills showed severe in-plane damages and failed in many cases under out-of-plane seismic loading. As the undesired interactions between frames and infills changes the load transfer on building level, complete collapses of buildings were observed. A possible solution is uncoupling of masonry infills to the frame to reduce the infill contribution activated by the frame deformation under horizontal loading. The paper presents numerical simulations on RC frames equipped with the innovative decoupling system INODIS. The system was developed within the European project INSYSME and allows an effective uncoupling of frame and infill. The simulations are carried out with a micro-modelling approach, which is able to predict the complex nonlinear behaviour resulting from the different materials and their interaction. Each brick is modelled individually and connected taking into account nonlinearity of a brick mortar interface. The calibration of the model is based on small specimen tests and experimental results for one bay one storey frame are used for the validation. The validated model is further used for parametric studies on two storey and two bay infilled frames. The response and change of the structural stiffness are analysed and compared to the traditionally infilled frame. The results confirm the effectiveness of the INODIS system with less damage and relatively low contribution of the infill at high drift levels. In contrast to the uncoupled system configurations, traditionally infilled frames experienced brittle failure at rather low drift levels.
Y1  - 2020
U6  - https://doi.org/10.1201/9781003098508-72
N1  - 17th International Brick/Block Masonry Conference (17thIB2MaC 2020), July 5-8, 2020, Kraków, Poland
SP  - 1
EP  - 7
PB  - CRC Press
CY  - London
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil
T2  - Seismic design of industrial facilities 2020
N2  - A further development of the Added-Mass-Method allows the combined representation of the effects of both soil-structure-interaction and fluid-structure interaction on a liquid-filled-tank in one model. This results in a practical method for describing the dynamic fluid pressure on the tank shell during joint movement. The fluid pressure is calculated on the basis of the tank's eigenform and the earthquake acceleration and represented by additional masses on the shell. The bearing on compliant ground is represented by replacement springs, which are calculated dependent on the local soil composition. The influence of the shear modulus of the compliant soil is clearly visible in the pressure curves and the stress distribution in the shell. The acceleration spectra are also dependent on soil stiffness. According to Eurocode-8 the acceleration spectra are determined for fixed soil-classes, instead of calculating the accelerations for each site in direct dependence on the soil composition. This leads to unrealistic sudden changes in the system's response. Therefore, earthquake spectra are calculated for different soil models in direct dependence of the shear modulus. Thus, both the acceleration spectra and the replacement springs match the soil composition. This enables a reasonable and consistent calculation of the system response for the actual conditions at each site.
Y1  - 2020
SN  - 978-3-86359-729-0
N1  - 2nd International Conference on Seismic Design of Industrial Facilities (Aachen, Germany, March 4-5, 2020)
SP  - 245
EP  - 254
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Markinkovic, Marko
A1  - Butenweg, Christoph
A1  - Pavese, A.
A1  - Lanese, I.
A1  - Hoffmeister, B.
A1  - Pinkawa, M.
A1  - Vulcu, C.
A1  - Bursi, O.
A1  - Nardin, C.
A1  - Paolacci, F.
A1  - Quinci, G.
A1  - Fragiadakis, M.
A1  - Weber, F.
A1  - Huber, P.
A1  - Renault, P.
A1  - Gündel, M.
A1  - Dyke, S.
A1  - Ciucci, M.
A1  - Marino, A.
T1  - Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests
T2  - Seismic design of industrial facilities 2020
Y1  - 2020
SN  - 978-3-86359-729-0
N1  - 2nd International Conference on Seismic Design of Industrial Facilities (Aachen, Germany, March 4-5, 2020)
SP  - 159
EP  - 172
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Cacciatore, Pamela
A1  - Butenweg, Christoph
T1  - Seismic safety of cylindrical granular material steel silos under seismic loading
T2  - Seismic design of industrial facilities 2020
Y1  - 2020
SN  - 978-3-86359-729-0
N1  - 2nd International Conference on Seismic Design of Industrial Facilities (Aachen, Germany, March 4-5, 2020)
SP  - 231
EP  - 244
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Boden, Ralf Christian
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Hercik, D.
A1  - Herique, A.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Kofman, Wlodek
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - McInnes, Colin R.
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Moore, Iain
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Plettenmeier, Dirk
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Rogez, Yves
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Toth, Norbert
A1  - Viavattene, Giulia
A1  - Wejmo, Elisabet
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Responsive exploration and asteroid characterization through integrated solar sail and lander development using small spacecraft technologies
T2  - IAA Planetary Defense Conference
N2  - In parallel to the evolution of the Planetary Defense Conference, the exploration of small solar system bodies has advanced from fast fly-bys on the sidelines of missions to the planets to the implementation of dedicated sample-return and in-situ analysis missions. Spacecraft of all sizes have landed, touch-and-go sampled, been gently beached, or impacted at hypervelocity on asteroid and comet surfaces. More have flown by close enough to image their surfaces in detail or sample their immediate environment, often as part of an extended or re-purposed mission. And finally, full-scale planetary defense experiment missions are in the making. Highly efficient low-thrust propulsion is increasingly applied beyond commercial use also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another development in the same years is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities. The on-going NASA OSIRIS-REx and JAXA HAYABUSA2 missions exemplify the trend as well as the upcoming NEA SCOUT mission or the landers MINERVA-II and MASCOT recently deployed on Ryugu. We outline likely as well as possible and efficient routes of continuation of all these developments towards a propellant-less and highly efficient class of spacecraft for small solar system body exploration: small spacecraft solar sails designed for carefree handling and equipped with carried landers and application modules, for all asteroid user communities –planetary science, planetary defence, and in-situ resource utilization. This projection builds on the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)² solar sail at DLR Cologne and in the 20 years since. It draws on the background of extensive trajectory optimization studies, the qualified technology of the DLR GOSSAMER-1 deployment demonstrator, and the MASCOT asteroid lander. These enable ‘now-term’ as well as near-term hardware solutions, and thus responsive fast-paced development. Mission types directly applicable to planetary defense include: single and Multiple NEA Rendezvous ((M)NR) for mitigation precursor, target monitoring and deflection follow-up tasks; sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation; and deployable membrane based methods to modify the asteroid’s properties or interact with it. The DLR-ESTEC GOSSAMER Roadmap initiated studies of missions uniquely feasible with solar sails such as Displaced L1 (DL1) space weather advance warning and monitoring and Solar Polar Orbiter (SPO) delivery which demonstrate the capability of near-term solar sails to achieve NEA rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. For those mission types using separable payloads, such as SPO, (M)NR and RKI, design concepts can be derived from the separable Boom Sail Deployment Units characteristic of DLR GOSSAMER solar sail technology, nanolanders like MASCOT, or microlanders like the JAXA-DLR Jupiter Trojan Asteroid Lander for the OKEANOS mission which can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. These are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.
Y1  - 2019
N1  - Conference: IAA Planetary Defense ConferenceAt: Washington DC, USA
29.04-03.05.2019
ER  - 
TY  - CHAP
A1  - Möhren, Felix
A1  - Bergmann, Ole
A1  - Janser, Frank
A1  - Braun, Carsten
T1  - On the determination of harmonic propeller loads
T2  - AIAA SCITECH 2023 Forum
N2  - Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.
Y1  - 2023
U6  - https://doi.org/10.2514/6.2023-2404
N1  - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, Md & Online
PB  - AIAA
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Global optimization of low-thrust space missions using evolutionary neurocontrol
T2  - Proceedings of the international workshop on global optimization
N2  - Low-thrust space propulsion systems enable flexible high-energy deep space missions, but the design and optimization of the interplanetary transfer trajectory is usually difficult. It involves much experience and expert knowledge because the convergence behavior of traditional local trajectory optimization methods depends strongly on an adequate initial guess. Within this extended abstract, evolutionary neurocontrol, a method that fuses artificial neural networks and evolutionary algorithms, is proposed as a smart global method for low-thrust trajectory optimization. It does not require an initial guess. The implementation of evolutionary neurocontrol is detailed and its performance is shown for an exemplary mission.
KW  - Evolutionary Neurocontrol
KW  - Spacecraft Trajectory Optimization
KW  - Low-Thrust Propulsion
Y1  - 2005
SP  - 85
EP  - 90
ER  - 
TY  - CHAP
A1  - Schartner, Karl-Heinz
A1  - Loeb, H. W.
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Perspectives of electric propulsion for outer planetary and deep space missions
T2  - European Planetary Science Congress 2009
N2  - Solar-electric propulsion (SEP) is superior with
respect to payload capacity, flight time and
flexible launch window to the conventional
interplanetary transfer method using chemical
propulsion combined with gravity assists. This fact
results from the large exhaust velocities of electric
low–thrust propulsion and is favourable also for
missions to the giant planets, Kuiper-belt objects
and even for a heliopause probe (IHP) as shown in
three studies by the authors funded by DLR. They
dealt with a lander for Europa and a sample return
mission from a mainbelt asteroid [1], with the
TANDEM mission [2]; the third recent one
investigates electric propulsion for the transfer to
the edge of the solar system.
All studies are based on triple-junction solar arrays,
on rf-ion thrusters of the qualified RIT-22 type and
they use the intelligent trajectory optimization
program InTrance [3].
Y1  - 2009
N1  - European Planetary Science Congress 2009, 13-18 September, Potsdam, Germany
SP  - 416
EP  - 416
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Riemann, Johannes
A1  - Spröwitz, Tom
A1  - Tardivel, Simon
T1  - Soil to sail-asteroid landers on near-term sailcraft as an evolution of the GOSSAMER small spacecraft solar sail concept for in-situ characterization
T2  - 5th IAA Planetary Defense Conference
KW  - multiple NEA rendezvous
KW  - solar sail
KW  - GOSSAMER-1
KW  - MASCOT
KW  - asteroid sample return
Y1  - 2017
N1  - 5th IAA Planetary Defense Conference – PDC 2017
15-19 May 2017, Tokyo, Japan
ER  - 
TY  - CHAP
A1  - Wolf, Martin R.
A1  - Schlick, Christopher
A1  - Herbst, D.
A1  - Springer, J.
ED  - Uellner, Stefan
T1  - Einflussfaktoren auf den Erfolg von Telekooperation in großen Unternehmen
T2  - Computer Supported Cooperative Work (CSCW) in großen Unternehmungen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" und dem Technologiezentrum Darmstadt der Deutschen Telekom AG vom 09. - 10. Mai 1996
Y1  - 1996
SP  - 1
EP  - 12
PB  - Dt. Telekom
CY  - Darmstadt
ER  - 
TY  - CHAP
A1  - Bertsch, Timo
A1  - Meinecke, Matthias
A1  - Wolf, Martin R.
A1  - Schmunk, Karina
T1  - Smart-Living-Services nur gegen Daten? Process-Mining als Möglichkeit zur Steigerung der Akzeptanz!
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - Seit Jahren etablieren sich Technologien in unserem Alltag, die mit Hilfe von smarten Komponenten neue Services und Vernetzungsmöglichkeiten schaffen. Dieses Paper beschreibt die Ergebnisse einer Studie, die die Akzeptanz von IoT-gestützten, smarten Services im privaten Umfeld untersucht. Dabei wird eine zentrale Datenverarbeitung mit automatisierter Erstellung smarter Services der dezentralen Datenverarbeitung mit manueller Serviceerstellung in sieben Kategorien gegenübergestellt. Die Auswertung der Studie legt die Forschungsfrage nahe, ob das Nutzerverhalten im Kontext Smart Living nicht auch mit einem
dezentralen Lösungsansatz, und somit unabhängig von großen Unternehmen, analysiert werden kann. Hierfür wird im zweiten Teil des Papers die Anwendbarkeit von Process-Mining im Bereich Smart Living untersucht und prototypisch getestet.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 216
EP  - 226
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Solar sail performance requirements for missions to the outer solar system and beyond
T2  - 55th International Astronautical Congress 2004
N2  - Solar sails enable missions to the outer solar system and beyond, although the solar
radiation pressure decreases with the square of solar distance. For such missions, the solar sail may gain a large amount of energy by first making one or more close approaches to the sun. Within this paper, optimal trajectories for solar sail missions to the outer planets and into near interstellar space (200 AU) are presented. Thereby, it is shown that even near/medium-term solar sails with relatively moderate performance allow reasonable transfer times to the boundaries of the solar system.
Y1  - 2004
U6  - https://doi.org/10.2514/6.IAC-04-S.P.11
N1  - 55th International Astronautical Congress 2004 - Vancouver, Canada
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
A1  - Nojima, H.
T1  - Plasma cluster ions (PCI) influence on microbial cells viability : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first “Plasma Cluster Ions (PCI)” air purification technology, which uses plasma discharge to generate cluster ions. The new plasma cluster device releases into the air positive and negative ions, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. A lot of phenomenological tests of the PCI air purification technology on microbial cells have been conducted. And, in most cases, it has been shown that PCI demonstrate strongly pronounced killing effect. Although, the particular mechanisms of PCI action are still not evident. We studied variations in resistance to PCI among gram-positive airborne microorganisms, as well as some dose-dependent, spatial, cultural and biochemical properties of PCI action in respect of Staphylococcus spp, Enterococcus spp, Micrococcus spp.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
T1  - A comparative study of self-aerated stepped spillway and smooth invert chute flow: the effect of step-induced macro roughness
T2  - 5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010
Y1  - 2010
SN  - 978-7-5618-3671-2
SP  - 451
EP  - 456
PB  - Univ. Press
CY  - Tianjin
ER  - 
TY  - CHAP
A1  - Tomić, Igor
A1  - Penna, Andrea
A1  - DeJong, Matthew
A1  - Butenweg, Christoph
A1  - Correia, António A.
A1  - Candeias, Paulo X.
A1  - Senaldi, Ilaria
A1  - Guerrini, Gabriele
A1  - Malomo, Daniele
A1  - Beyer, Katrin
T1  - Seismic testing of adjacent interacting masonry structures
T2  - 12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)
N2  - In many historical centres in Europe, stone masonry buildings are part of building aggregates, which developed when the layout of the city or village was densified. In these aggregates, adjacent buildings share structural walls to support floors and roofs. Meanwhile, the masonry walls of the façades of adjacent buildings are often connected by dry joints since adjacent buildings were constructed at different times. Observations after for example the recent Central Italy earthquakes showed that the dry joints between the building units were often the first elements to be damaged. As a result, the joints opened up leading to pounding between the building units and a complicated interaction at floor and roof beam supports. The analysis of such building aggregates is very challenging and modelling guidelines do not exist. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The objective of the project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures), included in the H2020 project SERA, is to provide such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic
excitation. The test unit is built at half-scale, with a two-storey building and a one-storey building. The buildings share one common wall while the façade walls are connected by dry joints. The floors are at different heights leading to a complex dynamic response of this smallest possible building aggregate. The shake table test is conducted at the LNEC seismic testing facility. The testing sequence comprises four levels of shaking: 25%, 50%, 75% and 100% of nominal shaking table capacity. Extensive instrumentation, including accelerometers, displacement transducers and optical measurement systems, provides detailed information on the building aggregate response. Special attention is paid to the interface opening, the globa
KW  - Historical centres
KW  - Stone masonry
KW  - Adjacent buildings
KW  - Shake table test
Y1  - 2020
U6  - https://doi.org/10.23967/sahc.2021.234
N1  - 12th International Conference on Structural Analysis of Historical Constructions (SAHC 2021), September 29-30 and October 1, 2021, online
N1  - (SAHC 2020 ursprünglich geplant für September 2020 in Barelona - verschoben wg. Covid-Pandemie)
SP  - 1
EP  - 12
ER  -