TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A face-based smoothed finite element method for hyperelastic models and tissue growth
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Hirtbach, Stefan
A1  - Kraft, Bodo
A1  - Steinmetzler, Andreas
ED  - Kowalewski, Stefan
T1  - Software in the city: visual guidance through large scale software projects
T2  - Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. März 2013 in Aachen. (GI-Edition ; 213)
Y1  - 2013
SN  - 978-3-88579-607-7 ; 978-3-88579-609-1
SP  - 213
EP  - 224
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Barkschat, Kai
A1  - Kraft, Bodo
T1  - Using Continuous Integration to organize and monitor the annotation process of domain specific corpora
T2  - 5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien
Y1  - 2014
SN  - 978-1-4799-3022-7
U6  - http://dx.doi.org/10.1109/IACS.2014.6841958
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Buniatyan, V. V.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Rustamyan, L. G.
A1  - Hovnikyan, H. H.
T1  - Equivalent circuit and optimization of impedance characteristics of an electrolyte conductivity sensor
T2  - Proceedings of State Engineering University Armenia : Series Information technologies, electronics, radio engineering
Y1  - 2014
VL  - Iss. 17
IS  - No. 1
SP  - 69
EP  - 76
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Buniatyan, V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Yoshinobu, T.
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Semiconductor-based sensors for imaging of chemical processes
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Bäcker, Matthias
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor system for the monitoring of degradation processes of biodegradable biopolymers
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films
T2  - Armenian Journal of Physics
Y1  - 2007
SN  - 1829-1171
SP  - 95
EP  - 98
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Mlynek, D.
A1  - Hataihimakul, S.
A1  - Pedraza, A.
A1  - Dhawan, S.
A1  - Laube, N.
A1  - Kleinen, L.
A1  - Baldsiefen, G.
A1  - Busch, H.
A1  - Schöning, Michael Josef
T1  - Ion-selective sensors for the determination of the risk of urinary stone formation
T2  - Micro- and Nanosystems in biochemical diagnosis : Principles and applications
Y1  - 2010
SP  - 74
EP  - 80
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensor as semiconductor-based sensor platform for (bio-) chemical sensing
T2  - Armenian Journal of Physics
Y1  - 2008
SN  - 1829-1171
SP  - 99
EP  - 103
ER  - 
TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Stütz, Evamaria
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Detection of toxic chromium species in water using cellbased sensor systems
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.1.14
SP  - 1364
EP  - 1367
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Wagner, Torsten
A1  - Näther, Niko
A1  - Rolka, David
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Turek, Monika
A1  - Ingebrandt, Sven
A1  - Poghossian, Arshak
T1  - A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices
T2  - MRS Proceedings
Y1  - 2006
U6  - http://dx.doi.org/10.1557/PROC-0952-F08-02
N1  - Vol. 952 - Symposium F - Integrated Nanosensors
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Moritz, Werner
A1  - Yoshinobu, Tatsuo
A1  - Finger, Friedhelm
A1  - Krause, Steffi
A1  - Schöning, Michael Josef
T1  - Amorphous silicon as semiconductor material for high resolution LAPS
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 48
EP  - 49
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
A1  - Finger, F.
A1  - Moritz, W.
A1  - Iwasaki, H.
T1  - Thin-film a-Si LAPS : Preparation and pH sensitivity
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 88
EP  - 89
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Living cell-based gas sensor system for the detection of acetone in air
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/3.2.3
SP  - 269
EP  - 272
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Werner, Frederik
A1  - Sawada, Kazuaki
A1  - Schöning, Michael Josef
T1  - Comparison of label-free ACh image sensors based on CCD and LAPS
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/4.2.6
SP  - 356
EP  - 359
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Bifunktionaler Sensorchip für den Nachweis von Gelöstwasserstoff
Y1  - 2011
SN  - 978-3942710-53-4
U6  - http://dx.doi.org/10.5162/10dss2011/16.10
SP  - 325
EP  - 328
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Moreno, Lia
A1  - Huachupoma, S.
A1  - Xu, J.
A1  - Wagner, Torsten
A1  - Bratov, A.
A1  - Doll, T.
A1  - Vlasov, Y.
A1  - Schöning, Michael Josef
ED  - Gerlach, Gerald
T1  - Halbleiterbasierte Schwermetallsensorik auf der Basis von Chalkogenidgläsern für zukünftige „Lab on Chip“-Anwendungen
T2  - 7. Dresdner Sensor-Symposium - Neue Herausforderungen und Anwendungen in der Sensortechnik
Y1  - 2005
SN  - 3-938863-29-3
SP  - 221
EP  - 224
PB  - TUDpress, Verl. der Wissenschaften
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Han, Y.
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Poghossian, Arshak
T1  - Markierungsfreie DNA-Detektion mit Silizium-Feldeffektsensoren – Messeffekte oder Artefakte?
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 443
EP  - 446
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Platen, J.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Präparation von selbstjustierenden Nanostrukturen mittels Schichtausdehnungstechnik
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 277
EP  - 280
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Rao, C.
A1  - Molina, R.
A1  - Schöning, Michael Josef
T1  - Licht-adressierbare potentiometrische Sensorsysteme – Konzepte und Anwendungen
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 165
EP  - 168
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schumacher, Kerstin
A1  - Kloock, Joachim P.
A1  - Rosenkranz, Christian
A1  - Schultze, Joachim W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell
N2  - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.
KW  - Biosensor
KW  - Biosensorik
KW  - ISFET
KW  - Wafer
KW  - ISFET
KW  - wafer-level testing
KW  - capillary micro-droplet cell
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - The restricted influence of kinematic hardening on shakedown loads
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratcheting. To this end it is important to make a clear distinction between the shakedown range and the ratcheting range. In cyclic plasticity more sophisticated hardening models have been suggested in order to model the strain evolution observed in ratcheting experiments. The hardening models used in shakedown analysis are comparatively simple. It is shown that shakedown analysis can make quite stable predictions of admissible load ranges despite the simplicity of the underlying hardening models. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis. Both give identical or similar shakedown ranges. Structural shakedown analyses show that the loading may have a more pronounced effect than the hardening model.
KW  - Biomedizinische Technik
KW  - Einspielen <Werkstoff>
KW  - Shakedown
KW  - Ratcheting
KW  - Bruchmechanik
KW  - shakedown
KW  - material shakedown
KW  - linear kinematic hardening
KW  - nonlinear kinematic hardening
KW  - ratchetting
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Direct static FEM approach to limit and shakedown analysis
N2  - Safety and reliability of structures may be assessed indirectly by stress distributions. Limit and shakedown theorems are simplified but exact methods of plasticity that provide safety factors directly in the loading space. These theorems may be used for a direct definition of the limit state function for failure by plastic collapse or by inadaptation. In a FEM formulation the limit state function is obtained from a nonlinear optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error. Moreover, the direct way leads to highly effective and precise reliability analyses. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis.
KW  - Einspielen <Werkstoff>
KW  - Nichtlineare Optimierung
KW  - Shakedown
KW  - Shakedown
KW  - limit load
KW  - lower bound theorem
KW  - nonlinear optimization
KW  - reliability
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Design by Analysis of Pressure Components by non-linear Optimization
N2  - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.
KW  - Analytischer Zulaessigkeitsnachweis
KW  - FEM
KW  - Einspiel-Analyse
KW  - design-by-analysis
KW  - finite element analysis
KW  - limit and shakedown analysis
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Fundamental aspects of numerical methods for the propagation of multi-dimensional nonlinear waves in solids
T2  - Nonlinear hyperbolic equations : theory, computations methods, and applications ; proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen
N2  - The nonlinear scalar constitutive equations of gases lead to a change in sound speed from point to point as would be found in linear inhomogeneous (and time dependent) media. The nonlinear tensor constitutive equations of solids introduce the additional local effect of solution dependent anisotropy. The speed of a wave passing through a point changes with propagation direction and its rays are inclined to the front. It is an open question whether the widely used operator splitting techniques achieve a dimensional splitting with physically reasonable results for these multi-dimensional problems. May be this is the main reason why the theoretical and numerical investigations of multi-dimensional wave propagation in nonlinear solids are so far behind gas dynamics. We hope to promote the subject a little by a discussion of some fundamental aspects of the solution of the equations of nonlinear elastodynamics. We use methods of characteristics because they only integrate mathematically exact equations which have a direct physical interpretation.
KW  - Nichtlineare Welle
KW  - Nichtlineare Gleichung
KW  - Festkörper
KW  - Elastodynamik
KW  - Multi-dimensional wave propagation
KW  - nonlinear solids
KW  - nonlinear tensor constitutive equation
Y1  - 1989
SP  - 574
EP  - 588
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Singh, Virendra
A1  - Dhand, Chetna
A1  - Kaur, Manindar
A1  - Singh, Tejvir
A1  - Witte, Katrin
A1  - Scherer, Ulrich W.
T1  - Study of swift heavy ion modified conduction polymer composites for application as gas sensor
N2  - A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.
KW  - Biosensor
KW  - Conducing polymer
KW  - ammonia gas sensors
KW  - swift heavy ions
KW  - polymer composites
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1345
ER  - 
TY  - CHAP
A1  - Chaiyboun, Ali
A1  - Traute, Rüdiger
A1  - Kiesewetter, Olaf
A1  - Ahlers, Simon
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - Modular analytical multicomponent analysis in gas sensor arrays
N2  - A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.
KW  - Biosensor
KW  - Main sensitivity
KW  - cross sensitivity
KW  - matrix method
KW  - gas sensor array
KW  - modelling
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1358
ER  - 
TY  - CHAP
A1  - Sakthivel, Mariappan
A1  - Weppner, Werner
T1  - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method
N2  - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.
KW  - Biosensor
KW  - Hydrogen sensor
KW  - amperometric sensor
KW  - porous Pt electrode
KW  - chemical reduction method
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399
ER  - 
TY  - CHAP
A1  - Koplin, Tobias J.
A1  - Siemons, Maike
A1  - Océn-Valéntin, César
A1  - Sanders, Daniel
A1  - Simon, Ulrich
T1  - Workflow for high throughput screening of gas sensing materials
N2  - The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.
KW  - Biosensor
KW  - High throughput experimentation
KW  - gas sensor
KW  - metal oxide
KW  - doping
KW  - impedance spectroscopy
KW  - nitrogen oxides
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1407
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Juárez, Leon M.
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes
N2  - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.
KW  - Biosensor
KW  - Gas sensor
KW  - hydrogen peroxide
KW  - sterilisation
KW  - catalytic decomposition
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418
ER  - 
TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - CHAP
A1  - Mirmohseni, Abdolreza
A1  - Rostamizadeh, Kobra
T1  - Quartz crystal nanobalance in conjunction with principal component analysis for  identification of volatile organic compounds
N2  - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.
KW  - Biosensor
KW  - Quartz crystal nanobalance (QCN)
KW  - BTEX compounds
KW  - principal component
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434
ER  - 
TY  - CHAP
A1  - Kreutz, Christian
A1  - Lörgen, Jürgen
A1  - Graewe, Boris
A1  - Bargon, Joachim
A1  - Yoshida, Mayumi
A1  - Freso, Zachary M.
A1  - Frèchet, Jean M. J.
T1  - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors
N2  - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).
KW  - Biosensor
KW  - Quartz micro balances
KW  - electronic noses dendronized polymers inverted mesa technology
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445
ER  - 
TY  - CHAP
A1  - Rabner, Arthur
A1  - Shacham, Yosi
T1  - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging
N2  - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.
KW  - Biosensor
KW  - Fluorescence
KW  - imaging
KW  - lab-on-chip
KW  - fluidic
KW  - lenslet array
KW  - LED chip
KW  - image sensor
KW  - biosensor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456
ER  - 
TY  - CHAP
A1  - Förster, Arnold
A1  - Stock, Jürgen
A1  - Montanari, Simone
A1  - Lepsa, Mihail Ion
A1  - Lüth, Hans
T1  - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry
N2  - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.
KW  - Biosensor
KW  - Gunn diode
KW  - microwave generation
KW  - GaAs hot electron injector
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462
ER  -