TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - http://dx.doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Khaydukova, M. M.
A1  - Zadorozhnaya, O. A.
A1  - Kirsanov, D. O.
A1  - Iken, Heiko
A1  - Rolka, David
A1  - Schöning, Michael Josef
A1  - Babain, V. A.
A1  - Vlasov, Yu. G.
A1  - Legin, A. V.
T1  - Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes
JF  - Russian journal of applied chemistry
N2  - The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.
Y1  - 2014
U6  - http://dx.doi.org/10.1134/S1070427214030112
SN  - 1608-3296 (E-Journal); 1070-4272 (Print)
VL  - 87
IS  - 3
SP  - 307
EP  - 314
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Ahlborn, K.
A1  - Gerlach, F.
A1  - Vonau, W.
A1  - Zander, W.
A1  - Schubert, J.
A1  - Schöning, Michael Josef
T1  - Development of redox glasses and subsequent processing by means of pulsed laser deposition for realizing silicon-based thin-film sensors
JF  - Electrochimica acta
Y1  - 2013
SN  - 1873-3859 (E-Journal); 0013-4686 (Print)
SP  - Available online 30.8.2013
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Kirsanov, D.
A1  - Legin, A.
A1  - Schöning, Michael Josef
T1  - Novel Thin-Film Polymeric Materials for the Detection of Heavy Metals
JF  - Procedia Engineering
N2  - A variety of transition metals, e.g., copper, zinc, cadmium, lead, etc. are widely used in industry as components for wires, coatings, alloys, batteries, paints and so on. The inevitable presence of transition metals in industrial processes implies the ambition of developing a proper analytical technique for their adequate monitoring. Most of these elements, especially lead and cadmium, are acutely toxic for biological organisms. Quantitative determination of these metals at low activity levels in different environmental and industrial samples is therefore a vital task. A promising approach to achieve an at-side or on-line monitoring on a miniaturized and cost efficient way is the combination of a common potentiometric sensor array with heavy metal-sensitive thin-film materials, like chalcogenide glasses and polymeric materials, respectively.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.proeng.2012.09.148
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 322
EP  - 325
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - PAT
A1  - Ahlborn, Kristina
A1  - Gerlach, Frank
A1  - Iken, Heiko
A1  - Schöning, Michael Josef
A1  - Vonau, Winfried
T1  - Miniaturisierte, potentiometrische Indikatorelektrode und Verfahren zu deren Herstellung : Offenlegungsschrift
Y1  - 2012
ER  -