TY  - CHAP
A1  - Logen, Steffen
A1  - Höfken, Hans
A1  - Schuba, Marko
T1  - Simplifying RAM Forensics : A GUI and Extensions for the Volatility Framework
T2  - 2012 Seventh International Conference on Availability, Reliability and Security (ARES), 20-24 August 2012, Prague, Czech Republic
N2  - The Volatility Framework is a collection of tools for the analysis of computer RAM. The framework offers a multitude of analysis options and is used by many investigators worldwide. Volatility currently comes with a command line interface only, which might be a hinderer for some investigators to use the tool. In this paper we present a GUI and extensions for the Volatility Framework, which on the one hand simplify the usage of the tool and on the other hand offer additional functionality like storage of results in a database, shortcuts for long Volatility Framework command sequences, and entirely new commands based on correlation of data stored in the database.
Y1  - 2012
SN  - 978-1-4673-2244-7
U6  - http://dx.doi.org/10.1109/ARES.2012.12
SP  - 620
EP  - 624
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Schuba, Marko
A1  - Höfken, Hans
T1  - Backtrack5: Datensammlung und Reporterstellung für Pentester mit MagicTree / Höfken, Hans ; Schuba, Marko
JF  - Hakin9. 73 (2012), H. 3
Y1  - 2012
SN  - 1733-7186
SP  - 12
EP  - 16
PB  - -
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Combined amperometric/field-effect sensor for the detection of dissolved hydrogen
JF  - Sensors and  actuators B: Chemical
N2  - Real-time and reliable monitoring of the biogas process is crucial for a stable and efficient operation of biogas production in order to avoid digester breakdowns. The concentration of dissolved hydrogen (H₂) represents one of the key parameters for biogas process control. In this work, a one-chip integrated combined amperometric/field-effect sensor for monitoring the dissolved H₂ concentration has been developed for biogas applications. The combination of two different transducer principles might allow a more accurate and reliable measurement of dissolved H₂ as an early warning indicator of digester failures. The feasibility of the approach has been demonstrated by simultaneous amperometric/field-effect measurements of dissolved H₂ concentrations in electrolyte solutions. Both, the amperometric and the field-effect transducer show a linear response behaviour in the H₂ concentration range from 0.1 to 3% (v/v) with a slope of 198.4 ± 13.7 nA/% (v/v) and 14.9 ± 0.5 mV/% (v/v), respectively.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.snb.2012.10.050
SN  - 0925-4005
N1  - Part of special issue "Selected Papers from the 14th International Meeting on Chemical Sensors"
VL  - 187
SP  - 168
EP  - 173
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Statistical Tests Based on Reliability and Precision
JF  - Economic Quality Control : EQC ; international journal for quality and reliability
N2  - The construction of a statistical test is investigated which is based only on “reliability” and “precision” as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct.  However, the quantification of the precision of a statistical test is not at all evident.  Thereforethe paper presents and discusses several approaches.  Moreover the distinction of “nullhypothesis” and “alternative hypothesis” is not necessary any longer.
Y1  - 2012
U6  - http://dx.doi.org/10.1515/eqc-2012-0002
SN  - 1869-6147
VL  - 27
IS  - 1
SP  - 43
EP  - 64
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Grundlagen der Unternehmensbesteuerung
JF  - Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Examen, Berufseinstieg und Fortbildung
Y1  - 2012
SN  - 0340-3084
VL  - 41
IS  - 10
SP  - 1312
EP  - 1318
PB  - Lange
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting
JF  - Physics Procedia
N2  - Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.062
SN  - 1875-3892
N1  - Part of special issue "Laser Assisted Net shape Engineering 7 (LANE 2012)"
VL  - 39
SP  - 464
EP  - 470
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hasan, Istabrak
A1  - Keil, Ludger
A1  - Staat, Manfred
A1  - Wahl, Gerhard
A1  - Bourauel, Christoph
T1  - Determination of the frictional coefficient of the implant-antler interface : experimental approach
JF  - Biomedical Engineering / Biomedizinische Technik
N2  - The similar bone structure of reindeer antler to human bone permits studying the osseointegration of dental implants in the jawbone. As the friction is one of the major factors that have a significant influence on the initial stability of immediately loaded dental implants, it is essential to define the frictional coefficient of the implant-antler interface. In this study, the kinetic frictional forces at the implant-antler interface were measured experimentally using an optomechanical setup and a stepping motor controller under different axial loads and sliding velocities. The corresponding mean values of the static and kinetic frictional coefficients were within the range of 0.5–0.7 and 0.3–0.5, respectively. An increase in the frictional forces with increasing applied axial loads was registered. The measurements showed an evidence of a decrease in the magnitude of the frictional coefficient with increasing sliding velocity. The results of this study provide a considerable assessment to clarify the suitable frictional coefficient to be used in the finite element contact analysis of antler specimens.
Y1  - 2012
SN  - 1862-278X
VL  - 57
IS  - 5
SP  - 359
EP  - 363
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Wosnitza, Franz
A1  - Hilgers, Hans Gerd
T1  - Energieeffizienz und Energiemanagement : ein Überblick heutiger Möglichkeiten und Notwendigkeiten
Y1  - 2012
SN  - 978-3-8348-1941-3
N1  - eISBN 978-3-8348-8671-2
PB  - Springer Spektrum
CY  - Wiesbaden
ER  - 
TY  - BOOK
A1  - Janser, Frank
A1  - Havermann, Marc
T1  - Inkompressible Strömungen
Y1  - 2012
SN  - 978-3-86130-446-3
N1  - Strömungslehre und Aerodynamik
PB  - Mainz
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
ED  - Hartmann, Doreen
T1  - Gefährliche Liebschaften : Kunst zwischen Widerstand und Umarmung
T2  - Interventionen : Grenzüberschreitungen in Ästhetik, Politik und Ökonomie
KW  - Politische Kunst
KW  - Künstlerisches Handeln
Y1  - 2012
SN  - 978-3-7705-5283-2
SP  - 173
EP  - 189
PB  - Fink
CY  - München
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Nachtrodt, Frederik
A1  - Heuermann, Holger
A1  - Scherer, Ulrich W.
A1  - Mostacci, Domiziano
A1  - Finger, Torsten
A1  - Tietsch, Wolfgang
T1  - A novel 2.45 GHz/200 W Microwave Plasma Jet for High Temperature Applications above 3600 K
T2  - Journal of Physics : Conference Series
Y1  - 2012
SN  - 1742-6596
VL  - 406
IS  - 012029
ER  - 
TY  - CHAP
A1  - Nix, Yvonne
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Implementation of the edge-based smoothed extended finite element method
T2  - Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Nguyen, Thanh Ngoc
A1  - Staat, Manfred
T1  - FEM based shakedown analysis of hardening structures
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 870
EP  - 882
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Limit and shakedown analysis under uncertainty
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 837
EP  - 861
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx Hydrogen combustion chamber for industrial gas turbine applications“, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
T2  - ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012
Y1  - 2012
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; (14 ; 2012.02.27-03.02 ; Honolulu, Hawaii)
ER  - 
TY  - JOUR
A1  - Verbanella, Stresa
A1  - Fabo, Sabine
T1  - Mit Pinsel und Farbe hacken : Interview mit Sabine Fabo
T1  - Hacking with paint and brush : interview with Sabine Fabo
JF  - Remotewords.net
N2  - Remotewords makes its mark on the picturesque "Bar Verbanella”, located in Stresa near Isola Bella on Lago Maggiore. The words CUM GRANO SALIS (with a grain of salt) by Sabine Fabo, art theorist on media contexts, were applied to its roof in collaboration with the German-Italian art organization "Lo spirito del Lago".
KW  - Guerrillawerbung
KW  - Parasitäre Strategie
Y1  - 2012
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
T1  - Die Ostheidebahn - eine Alternative zur Y-Trasse
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2012
SN  - 0013-2845
VL  - 61
IS  - 11
SP  - 34
EP  - 37
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Schusser, Sebastian
A1  - Vaeßen, Christiane
A1  - Schöning, Michael Josef
T1  - 5. Graduiertentagung der FH Aachen 15. November 2012
T1  - 5th Graduate Symposium FH Aachen - University of Applied Sciences November 15th, 2012
N2  - Tagungsband der 5. Graduiertentagung der FH Aachen am 15. November 2012
N2  - Proceedings from the 5th Graduate Symposium, FH Aachen, Germany, November 15th, 2012
T3  - Graduiertentagung / FH Aachen - 5 
KW  - Graduiertentagung
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-50425
ER  - 
TY  - JOUR
A1  - Nomdedeu, Mar Monsonis
A1  - Willen, Christine
A1  - Schieffer, Andre
A1  - Arndt, Hartmut
T1  - Temperature-dependent ranges of coexistence in a model of a two-prey-one-predator microbial food web
JF  - Marine Biology
N2  - The objective of our study was to analyze the effects of temperature on the population dynamics of a three-species food web consisting of two prey bacteria (Pedobacter sp. and Acinetobacter johnsonii) and a protozoan predator (Tetrahymena pyriformis) as model organisms. We assessed the effects of temperature on the growth rates of all three species with the objective of developing a model with four differential equations based on the experimental data. The following hypotheses were tested at a theoretical level: Firstly, temperature changes can affect the dynamic behavior of a system by temperature-dependent parameters and interactions and secondly, food web response to temperature cannot be derived from the single species temperature response. The main outcome of the study is that temperature changes affect the parameter range where coexistence is possible within all three species. This has significant consequences on our ideas regarding the evaluation of effects of global warming.
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s00227-012-1966-x
SN  - 1432-1793
VL  - 159
IS  - 11
SP  - 2423
EP  - 2430
PB  - Springer
CY  - Berlin
ER  - 
TY  - THES
A1  - Schieffer, Andre
T1  - Studies on diversity and coexistence in an experimental microbial community
N2  - Biodiversity and the coexistence of species have puzzled and fascinated biologists since decades and is a hotspot in todays’ natural sciences. Preserving this biodiversity is a great challenge as habitats and environments underlying tremendous changes like climate change and the loss of natural habitats, which are mainly due to anthropogenic influences. The coexistence of numerous species even in homogeneous environments is a stunning feature of natural communities and has been summarized under the term ‘paradox of plankton’. Up to now, there are several mechanisms discussed, which may contribute to local and global diversity of organisms. Several interspecific trade offs have been identified maintaining the coexistence of species like their abilities regarding competition and predator avoidance, their capability to disperse in space and time, and their ability to exploit variable resources. Further, micro-evolutionary dynamics supporting the coexistence of species have been added to our knowledge, and deriving from theoretical deterministic models, non-linear dynamics which describe the temporal fluctuation of abundances of organisms. Whereas competition and predation seem to be clue structural elements within interacting organisms, the intrinsic dynamic behavior – by means of temporal changes in abundance - plays an important role regarding coexistence within a community. The present work sheds light on different factors affecting the coexistence of species using experimental microbial model systems consisting of a bacterivorous ciliate as the predator and two bacteria strains as prey organism. Additionally, another experimental setup consisting of two up to five bacteria species competing for one limiting resource was investigated. Highly controllable chemostat systems were established to exclude extrinsic disturbances. According to theoretical analyses I was able to show - experimentally and theoretically - that phenotypic plasticity of one species within a microbial one-predator-two-prey food web enlarges the range of possible coexistence of all species under different dynamic conditions, compared to a food web without phenotypic plasticity. This was accompanied by non-linear (chaotic) population dynamics within all experimental systems showing phenotypic plasticity. The experiments on the interplay of competition, predation and invasion showed that all aspects have an influence on species coexistence. Under undisturbed controlled conditions all aspects were analyzed in detail and in combination. Populations showed oscillations which were shown by quasi-chaotic attractors in phase space diagrams. Competition experiments with two up to five bacteria species competing for one limiting resource showed that all organisms were able to coexist which was mediated by species oscillations entering a regime of chaos. Besides that fact it was found, that the productivity (biomass) as well as the total cell numbers – under the same nutrition supply – increased by an increasing number of species in the experimental systems. Up to now, the occurrence of non-linear dynamics in well controlled experimental studies has been recognized several times and this phenomenon seemed to be more common in natural systems than generally assumed.
N2  - Biodiversität und die Koexistenz von Arten fasziniert und verblüfft Biologen seit Jahr-zehnten und stellen einen Schwerpunkt in der heutigen Umweltforschung dar. Der Schutz und die Konservierung dieser Mannigfaltigkeit stellen eine große Herausfor-derung dar, da die natürlichen Lebensräume sowie die Umwelt enormen Verände-rungen unterworfen sind, welche meist in einem anthropogenen Ursprung wurzeln. Die Koexistenz vieler Arten, auch in relativ homogenen Habitaten ist ein faszinieren-des Charakteristikum natürlicher Lebensgemeinschaften und wird als ‚Paradox des Planktons‘ bezeichnet. Gegenwärtig werden diverse Ursachen diskutiert, welche vermutlich zur lokalen und globalen Diversität von Organismen beitragen. Einige die-ser möglichen Ursachen, die zur Aufrechterhaltung der Koexistenz der Arten beitra-gen, wurden identifiziert: Das Vermögen der Konkurrenz- und Prädationsvermeidung, die Fähigkeit räumlicher sowie zeitlicher Verteilung, sowie das Vermögen variable Ressourcen zu nutzen. Des Weiteren wurden mikro-evolutionäre Phänomene und Dynamiken identifiziert, sowie, von theoretischen deterministischen Modellen ausge-hend, nichtlineare Dynamiken, welche die zeitlichen Schwankungen der Abundanzen von Organismen beschreiben. Diese Aspekte stellen die Schlüsselkomponenten zwi-schen interagierenden Organismen dar, wobei das intrinsiche, nicht lineare dynami-sche Verhalten in Form von zeitlichen Veränderungen in Abundanzen eine zusätzli-che entscheidende Rolle bezüglich der Koexistenz von Arten spielen kann. Einige dieser Aspekte wurden in der vorliegenden Arbeit untersucht. In Anlehnung an theoretische Analysen konnte experimentell sowie theoretisch gezeigt werden, dass phänotypische Plastizität in einer Bakterienart in einem mikrobiellen Ein-Räuber-zwei-Beute-Nahrungsgewebe den Bereich der möglichen Koexistenz unter sich än-dernden experimentellen Bedingungen (Änderungen der Durchflussraten der Chemostate) – im direkten Vergleich zu einem experimentellen Nahrungsgewebe ohne phänotypische Plastizität – erweitern kann. Dies wurde begleitet durch nicht lineare Abundanzschwankungen in den Populationen aller untersuchten Versuchs-ansätze. In weiteren Untersuchungen wurde das Zusammenspiel von Konkurrenz, Prädation und Invasion in einer experimentellen mikrobiellen Gemeinschaft untersucht. Unter kontrollierten Bedingungen konnten diese Aspekte detailliert untersucht werden und es konnten Aufschlüsse darüber gewonnen werden, welche Reaktionen (Interaktionen) innerhalb der untersuchten Gemeinschaften stattfinden. Im Versuchsverlauf wurden Veränderungen in den Abundanzen sowie chaotische Schwankungen der Zellzahlen festgestellt. In Konkurrenzexperimenten von zwei bis zu fünf um eine limitierende Ressource konkurrierende Bakterienarten konnte gezeigt werden, dass alle Arten – vermittelt durch chaotische Abundanzschwankungen – nebeneinander koexistieren konnten. Begleitend dazu wurde herausgefunden, dass die Produktivität (Biomasse) sowie die Gesamtzellzahl bei gleicher Nahrungsverfügbarkeit der experimentellen Systeme mit steigender Artenzahl zunehmen. Gegenwärtig ist das Auftreten von Chaos in gut kontrollierten experimentellen Studien vereinzelt beobachtet worden, wobei dieses Phänomen jedoch häufiger in der Natur aufzutreten scheint als generell vermutet.
Y1  - 2012
N1  - Köln, Univ., Diss., 2012
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
T1  - Biogas systems: basics, biogas multifunction, principle of fermentation and hybrid application with a solar tower for the treatment of waste animal manure
JF  - Journal of Engineering Science and Technology Review
N2  - Two of the main environmental problems of today’s society are the continuously increasing production of organic wastes as well as the increase of carbon dioxide in the atmosphere and the related green house effect. A way to solve these problems is the production of biogas. Biogas is a combustible gas consisting of methane, carbon dioxide and small amounts of other gases and trace elements. Production of biogas through anaerobic digestion of animal manure and slurries as well as of a wide range of digestible organic wastes and agricultural residues, converts these substrates into electricity and heat and offers a natural fertiliser for agriculture. The microbiological process of decomposition of organic matter, in the absence of oxygen takes place in reactors, called digesters. Biogas can be used as a fuel in a gas turbine or burner and can be used in a hybrid solar tower system offering a solution for waste treatment of agricultural and animal residues. A solar tower system consists of a heliostat field, which concentrates direct solar irradiation on an open volumetric central receiver. The receiver heats up ambient air to temperatures of around 700°C. The hot air’s heat energy is transferred to a steam Rankine cycle in a heat recovery steam generator (HRSG). The steam drives a steam turbine, which in turn drives a generator for producing electricity. In order to increase the operational hours of a solar tower power plant, a heat storage system and/ or hybridization may be considered. The advantage of solar-fossil hybrid power plants, compared to solar-only systems, lies in low additional investment costs due to an adaptable solar share and reduced technical and economical risks. On sunny days the hybrid system operates in a solar-only mode with the central receiver and on cloudy days and at night with the gas turbine only. As an alternative to methane gas, environmentally neutral biogas can be used for operating the gas turbine. Hence, the hybrid system is operated to 100% from renewable energy sources
Y1  - 2012
SN  - 1791-2377
N1  - Special Issue on Renewable Energy Systems
VL  - 5
IS  - 4
SP  - 48
EP  - 55
ER  - 
TY  - CHAP
A1  - Streun, M.
A1  - Al-Kaddoum, R.
A1  - Parl, C.
A1  - Pietrzyk, U.
A1  - Ziemons, Karl
A1  - Waasen, S. van
T1  - Simulation studies of optical photons in monolithic block scintillators
T2  - 2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - The interest in PET detectors with monolithic block scintillators is growing. In order to obtain high spatial resolutions dedicated positioning algorithms are required. But even an ideal algorithm can only deliver information which is provided by the detector. In this simulation study we investigated the light distribution on one surface of cuboid LSO scintillators of different size. Scintillators with a large aspect ratio (small footprint and large height) showed significant position information only for a minimum interaction depth of the gamma particle. The results allow a quantitative estimate for a useful aspect ratio.
Y1  - 2012
SN  - 978-1-4673-0120-6 (electronic ISBN)
SN  - 978-1-4673-0118-3 (print ISBN)
U6  - http://dx.doi.org/10.1109/NSSMIC.2011.6154621
SP  - 1380
EP  - 1382
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Hunyh
A1  - Staat, Manfred
T1  - Finite Element Implementation of a 3D Fung-type Model
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - JOUR
A1  - Hötter, Jan-Steffen
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber
JF  - RTejournal - Forum für Rapid Technologie
N2  - Additive Manufacturing durch Aufschmelzen von Metallpulvern hat sich auf breiter Front als Herstellverfahren, auch für Endprodukte, etabliert. Besonders für die Variante des Selective Laser Melting (SLM) sind Anwendungen in der Zahntechnik bereits weit verbreitet und der Einsatz in sensitiven Branchen wie der Luftfahrt ist in greifbare Nähe gerückt. Deshalb werden auch vermehrt Anstrengungen unternommen, um bisher nicht verarbeitete Materialien zu qualifizieren. Dies sind vorzugsweise Nicht-Eisen- und Edelmetalle, die sowohl eine sehr hohe Reflektivität als auch eine sehr gute Wärmeleitfähigkeit aufweisen – beides Eigenschaften, die die Beherrschung des Laser-Schmelzprozesses erschweren und nur kleine Prozessfenster zulassen. Die Arbeitsgruppe SLM des Lehr- und Forschungsgebietes Hochleistungsverfahren der Fertigungstechnik hat sich unter der Randbedingung einer kleinen und mit geringer Laserleistung ausgestatteten SLM Maschine der Aufgabe gewidmet und am Beispiel von Silber die Parameterfelder für Einzelspuren und wenig komplexe Geometrien systematisch untersucht. Die Arbeiten wurden von FEM Simulationen begleitet und durch metallographische Untersuchungen verifiziert. Die Ergebnisse bilden die Grundlage zur schnellen Parameterfindung bei komplexen Geometrien und bei Veränderungen der Zusammensetzung, wie sie bei zukünftigen Legierungen zu erwarten sind. Die Ergebnisse werden exemplarisch auf unterschiedliche Geometrien angewandt und entsprechende Bauteile gezeigt.
N2  - Additive manufacturing by melting of metal powders is a method that has been established even for the manufacturing of final products. In particular, Selective Laser Melting (SLM) is currently applied for prosthetic dentistry. In the near future, this technology will access sensitive industries like aerospace engineering. This leads to the need to process new materials. Therefore, especially non-ferrous metals and noble metals must be determined and qualified. These materials have in common a very high reflectivity and an excellent thermal conductivity. In general, these two properties counteract the control of the melt pool and contribute to very narrow process windows. The “SLM” research team of the Aachen University of Applied Science, AcUAS (FH Aachen) systematically investigated process parameter fields for silver. The work focused on a small SLM desktop machine with comparably low laser power. The results are verified using FEA and metallographic inspections and will support future set-ups for complex geometries. Furthermore, the obtained parameter fields are applied to make different geometric objects and to manufactured parts, which are presented.
KW  - SLM
KW  - Selektives Laser Schmelzen
KW  - Silber
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-33639
SN  - 1614-0923
VL  - 9
IS  - 1
SP  - 1
EP  - 14
PB  - Fachhoschule Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Einführung
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
SP  - 9
EP  - 13
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Die Kunst der Irritation und ihr Mehrwert
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
SP  - 112
EP  - 145
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Prizing & Pricing : Design zwischen Rang und Regal
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
U6  - http://dx.doi.org/10.1515/transcript.9783839421703.26
SP  - 26
EP  - 39
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Jakobs, Helmut
T1  - Vorwort
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
SP  - 7
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - BOOK
A1  - Uibel, Thomas
T1  - Spaltverhalten von Holz beim Eindrehen von selbstbohrenden Holzschrauben
Y1  - 2012
SN  - 978-3-86644-835-3
N1  - Karlsruhe, Univ., Diss. 2012 - Karlsruher Berichte zum Ingenieurholzbau ; 20
PB  - KIT Scientific Publishing
CY  - Karlsruhe
ER  - 
TY  - BOOK
A1  - Blaß, Hans Joachim
A1  - Uibel, Thomas
T1  - Spaltversagen von Holz in mehrreihigen Verbindungen :  Erweiterung des Rechen-modells für die Rissbildung beim Eindrehen von Holzschrauben
Y1  - 2012
SN  - 978-3-86644-852-0
N1  - Karlsruher Berichte zum Ingenieurholzbau ; Band 21
PB  - KIT Scientific Publishing
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Schnabel, Holger
T1  - Rapid-control-prototyping of industrial drives for the sercos automation bus
T2  - 13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan & 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)
N2  - This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.
KW  - MATLAB , MLPI , Motion control , Open Core , industrial drives , rapid control prototypin , sercos automation bus
Y1  - 2012
UR  - http://dx.doi.org/10.1109/MECATRONICS.2012.6451005
SN  - 978-1-4673-4771-6
SP  - 177
EP  - 181
ER  - 
TY  - JOUR
A1  - Wolf, Martin
T1  - Von Security Awareness zum Secure Behaviour
JF  - Hakin9 Extra – IT-Forensik
N2  - Security Awareness ist derzeit ein viel diskutiertes Thema. Es reicht nicht, einfach nur ein paar technische Systeme (z.B. Firewalls) zu installieren, um ein angemessenes Schutzniveau zu erzielen. Neben einer guten Organisation von IT Security ist es auch notwendig, den Mitarbeiter einzubinden. Der vielzitierte "Faktor Mensch" ist derjenige, der die Technik korrekt anwenden muss und der durch falsches Verhalten technische und organisatorische Schutzmaßnahmen aushebeln kann. Deshalb reicht es nicht aus, wenn sich der Mitarbeiter der Gefahren bewusst ("aware") ist, er muss auch dementsprechend "sicher" handeln.
Y1  - 2012
SN  - 1733-7186
VL  - 2012
IS  - 5
SP  - 18
EP  - 19
PB  - Software Wydawnictwo
CY  - Warszawa
ER  - 
TY  - CHAP
A1  - Klocke, Martina
T1  - Projektmodul im Bachelorstudiengang Maschinenbau und Mechatronik
T2  - VDI-Workshop Projektorientiertes und problem-basiertes Lernen (PBL) in der Ingenieurausbildung
Y1  - 2012
N1  - 25 Folien zum eingeladenen Vortrag beim VDI-Workshop. Darmstadt, 22./23.11.2012
SP  - 1
EP  - 25
ER  - 
TY  - PAT
A1  - Gollewski, Torsten
A1  - Lange, Robert
A1  - Ringbeck, Thorsten
A1  - Hess, Holger
A1  - Buxbaum, Bernd
T1  - Verfahren und Vorrichtung zur Laufzeitsensitiven Messung eines Signals [Offenlegungsschrift / Europäische Patentschrift]
T1  - Apparatus for delay-sensitive measurement of a signal
T1  - Dispositif pour le mesurage sensitif au temps de transit d'un signal
Y1  - 2006
PB  - Deutsches Patent- und Markenamt / Europäisches Patentamt
CY  - München / Den Hague
ER  - 
TY  - BOOK
A1  - Klein, Hartmut Heinz
A1  - Müller, Thomas
A1  - Lieber, Bettina
T1  - Änderung der Unternehmensform : Handbuch zum Umwandlungs- und Umwandlungssteuerrecht
Y1  - 2012
SN  - 978-3-482-42259-1
PB  - Verl. Neue Wirtschafts-Briefe
CY  - Herne
ET  - 9. Aufl.
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
ED  - Carstensen, Dirk
T1  - Blocksteinrampen in Riegelbauweise : Neue Bemessungsansätze
T2  - Staubauwerke : planen, bauen, betreiben; 35. Dresdner Wasserbaukolloquium 2012, 08. - 09. März 2012
Y1  - 2012
SN  - 978-3-86780-261-1
SP  - 317
EP  - 326
PB  - Selbstverl. der Techn. Univ.
CY  - Dresden
ER  - 
TY  - BOOK
A1  - Dören, Horst-Peter
T1  - Fügetechnik, Schweißtechnik. Horst-Peter Dören (Hrsg.).- 8., aktualis. und erw. Aufl.
Y1  - 2012
SN  - 978-3-87155-999-0
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Kirstein, Simon
A1  - Müller, Karsten
A1  - Walecki-Mingers, Mark
A1  - Deserno, Thomas M.
T1  - Robust adaptive flow line detection in sewer pipes
JF  - Automation in construction
N2  - As part of a novel approach to automatic sewer inspection, this paper presents a robust algorithm for automatic flow line detection. A large image repository is obtained from about 50,000 m sewers to represent the high variability of real world sewer systems. Automatic image processing combines Canny edge detection, Hough transform for straight lines and cost minimization using Dijkstra's shortest path algorithm. Assuming that flow lines are mostly smoothly connected horizontal structures, piecewise flow line delineation is reduced to a process of selecting adjacent line candidates. Costs are derived from the gap between adjacent candidates and their reliability. A single parameter α enables simple control of the algorithm. The detected flow line may precisely follow the segmented edges (α = 0.0) or minimize gaps at joints (α = 1.0). Both, manual and ground truth-based analysis indicate that α = 0.8 is optimal and independent of the sewer's material. The algorithm forms an essential step to further automation of sewer inspection.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.autcon.2011.05.009
SN  - 1872-7891 (E-Journal) ; 0926-5805 (Print)
IS  - 21
SP  - 24
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ganegedara, H.
A1  - Alahakoon, D.
A1  - Mashford, J.
A1  - Paplinski, A.
A1  - Müller, Karsten
A1  - Deserno, T. M.
T1  - Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections
T2  - The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)
Y1  - 2012
SN  - 978-1-4673-1490-9
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Kluczka, Sven
A1  - Vaeßen, Christiane
A1  - Roeb, M.
A1  - Neises, M.
T1  - Scenario development for efficient methanol production using CO2 and solar energy
T2  - Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012
Y1  - 2012
SP  - ID 99
CY  - Rijeka
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Klimek, J.
A1  - Hoffschmidt, Bernhard
A1  - Essen, H.
A1  - Sieger, S.
A1  - Biegel, G.
A1  - Göttsche, Joachim
A1  - Hilger, Patrick
T1  - Eurosun 2012 : radar technology for heliostat posititon control
T2  - Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012
Y1  - 2012
SP  - ID 80
CY  - Rijeka
ER  - 
TY  - CHAP
A1  - Hoffschmidt, Bernhard
A1  - Alexopoulos, Spiros
T1  - Perspektiven für Solarthermische Kraftwerke im Sonnengürtel
T2  - Energiewende : Aspekte, Optionen, Herausforderungen : Vorträge auf der DPG-Frühjahrstagung Arbeitskreis Energie in der Deutschen Physikalischen Gesellschaft Berlin, 26. bis 28. März 2012 / hrsg. von Hardo Bruhns
Y1  - 2012
SP  - 81
EP  - 93
PB  - DPG
CY  - Baf Honnef
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Meyer, Thomas
T1  - A Brief Overview of Artificial Intelligence in South Africa
JF  - AI Magazine
N2  - South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.
Y1  - 2012
U6  - http://dx.doi.org/10.1609/aimag.v33i1.2357
SN  - 0738-4602
VL  - 33
IS  - 1
SP  - 99
EP  - 101
PB  - AAAI
CY  - Menlo Park
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - BOOK
A1  - Armgardt, Jan
T1  - Ich mache (m)ein Ding : Möbel-Unikate
Y1  - 2012
SN  - 978-3-00-039169-9
PB  - [Selbstverl.]
CY  - [s.l.]
ER  -