TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Kronhardt, Valentina
A1  - Alexopoulos, Spiros
A1  - Reißel, Martin
A1  - Latzke, Markus
A1  - Rendon, C.
A1  - Sattler, Johannes, Christoph
A1  - Herrmann, Ulf
T1  - Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant Jülich using optimized control strategies of the storage system
T2  - Energy procedia
Y1  - 2015
SN  - 1876-6102
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Generative Fertigungsverfahren in der Produktentwicklung
T2  - Spritzgießen 2015
Y1  - 2015
SN  - 978-3-18-234336-3
SP  - 1
EP  - 19
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - Robots: challenges, chances and risks for solving 21st century problems
T2  - President’s Invitation Lecture / South African Institute of Electrical Engineers : May 21 & 22, 2015, University of Johannesburg
Y1  - 2015
SP  - 1
EP  - 45
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Wallnöfer, Armin
A1  - Drath, Rainer
A1  - Hüning, Felix
T1  - Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen
T2  - Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2015
SN  - 978-3-18-092258-4
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - Lenz, Laura L.
T1  - The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)
T2  - IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16
Y1  - 2015
SN  - 978-1-4799-4823-9
U6  - http://dx.doi.org/10.1109/SeGAH.2014.7067089
SP  - 135
EP  - 142
PB  - IEEE [u.a.]
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bühler, P.
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Lopes, P.
A1  - Carvalho, R.
T1  - Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions
T2  - 2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, F.
A1  - Schnug, E.
A1  - Scherer, Ulrich W.
T1  - Study of Trace Elements in Water Bodies of the Harz Mts. Region, Germany using Total Reflection X Ray Fluorescence (TXRF)
T2  - DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015
Y1  - 2015
SP  - 355
EP  - 356
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
T1  - Die Augsburger Dachterrassen der Renaissance
T2  - Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht über die Tagung des Arbeitskreises für Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.
Y1  - 2015
SN  - 978-3-89445-517-0
N1  - Jahrbuch für Hausforschung ; 62
SP  - 571
EP  - 585
PB  - Jonas Verlag für Kunst und Literatur
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Sirazitdinova, Y.
A1  - Dulzon, A.
A1  - Müller, Burghard
T1  - Project management practices in engineering university
T2  - 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1088/1757-899X/93/1/012080
N1  - IOP Conference Series: Materials Science and Engineering
Vol. 93, Issue 1
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - CHAP
A1  - Tewari, Udit
A1  - Neshvad, Surena
A1  - Goldbach, Daniel
A1  - Sachau, Jürgen
T1  - Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum
T2  - International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Lopes, Pedro
A1  - Bung, Daniel B.
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
T1  - The effect of cross-waves in physical stepped spillway models
T2  - E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
T1  - Universaler Plasmajet für verschiedene Behandlungsschritte der Klebetechnik
T2  - Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. März 2015, Maternushaus, Köln / DECHEMA
Y1  - 2015
SP  - 85
EP  - 87
CY  - Köln
ER  - 
TY  - CHAP
A1  - Gregorio, Fabrizio de
A1  - Fatigati, Giovanni
A1  - Kallweit, Stephan
T1  - Tiltrotor airframe flow field characterization by SPIV
T2  - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Theis, Jochen
A1  - Krisnamurthy, Hemanth Kumar
A1  - Schmitz, Günter
ED  - Jamal, Rahman
T1  - Modellbasierte Simulation und experimentelle Anwendung von mechatronischen Systemen in der Lehre in Verbindung mit NI myRIO und dem NI LabVIEW Interface Toolkit
T2  - Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress
Y1  - 2015
SN  - 978-3-8007-3669-0
SP  - 362
EP  - 365
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - http://dx.doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - CHAP
A1  - Gabrielli, Roland Antonius
A1  - Seelmann, Jürgen
A1  - Großmann, Agnes
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - System Architecture of a Lunar Industry Plant Using Regolith
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Peloni, Alessandro
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
T1  - Solar-Sailing Trajectory Design for Close-up NEA Observations Mission
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-19
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - 3D-Mapping von Straßentunneln
T2  - 16. Geokinematischer Tag, 07. und 08. Mai 2015 : Tagungsband / Technische Universität Bergakademie Freiberg
Y1  - 2015
N1  - Schriftenreihe des Instituts für Markscheidewesen und Geodsäsie an der Technischen Universität Bergakademie Freiberg
SP  - 31
EP  - 40
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes, Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Lindenlauf, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Cold Boot Attacks on DDR2 and DDR3 SDRAM
T2  - 10th International Conference on Availability, Reliability and Security (ARES) 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ARES.2015.28
SP  - 287
EP  - 292
ER  - 
TY  - CHAP
A1  - Wiezik, P.
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Integration des Laserpolierens in den SLM-Prozess
T2  - DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, Fügen von faserverstärkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vorträge der Veranstaltungen, Nürnberg, DE, 15.-17. Sep, 2015
Y1  - 2015
SN  - 978-3-945023-46-4
VL  - 315
SP  - 117
EP  - 120
PB  - Verl. für Schweißen und verwandte Verfahren, DVS-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Ferrein, Alexander
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - The RoboCup Logistics League as a Holistic Multi-Robot Smart Factory Benchmark
T2  - Proceedings of the IROS 2015 Open forum on evaluation of results, replication of experiments and benchmarking in robotics research
N2  - With autonomous mobile robots receiving increased
attention in industrial contexts, the need for benchmarks
becomes more and more an urgent matter. The RoboCup
Logistics League (RCLL) is one specific industry-inspired scenario
focusing on production logistics within a Smart Factory.
In this paper, we describe how the RCLL allows to assess the
performance of a group of robots within the scenario as a
whole, focusing specifically on the coordination and cooperation
strategies and the methods and components to achieve them.
We report on recent efforts to analyze performance of teams in
2014 to understand the implications of the current grading
scheme, and derived criteria and metrics for performance
assessment based on Key Performance Indicators (KPI) adapted
from classic factory evaluation. We reflect on differences and
compatibility towards RoCKIn, a recent major benchmarking
European project.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center
T2  - ICRA 2015 Developing Countries Forum
N2  - Mechatronics consist of the integration of mechanical
engineering, electronic integration and computer science/
engineering. These broad fields are essential for robotic
systems, yet it makes it difficult for the researchers to specialize
and be experts in all these fields. Collaboration between
researchers allow for the integration of experience and specialization,
to allow optimized systems. Collaboration between the
European countries and South Africa is critical, as each country
has different resources available, which the other countries
might not have. Applications with the need for approval of
any restrictions, can also be obtained easier in some countries
compared to others, thus preventing the delays of research.
Some problems that have been experienced are discussed, with
the Robotics Center of South Africa as a possible solution.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Booysen, Tracy
A1  - Mathew, Thomas
A1  - Knox, Greig
A1  - Fong, W. K.
A1  - Stüttgen, Marcel
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - The Scarab Project
T2  - ICRA 2015 Developing Countries Forum
N2  - Urban Search and Rescue (USAR) is an active research
field in the robotics community. Despite recent advances
for many open research questions, these kind of systems are
not widely used in real rescue missions. One reason is that such
systems are complex and not (yet) very reliable; another is that
one has to be an robotic expert to run such a system. Moreover,
available rescue robots are very expensive and the benefits of
using them are still limited.
In this paper, we present the Scarab robot, an alternative
design for a USAR robot. The robot is light weight, humanpackable
and its primary purpose is that of extending the
rescuer’s capability to sense the disaster site. The idea is that a
responder throws the robot to a certain spot. The robot survives
the impact with the ground and relays sensor data such as
camera images or thermal images to the responder’s hand-held
control unit from which the robot can be remotely controlled.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Finzi, Alberto
T1  - The RoboCup Logistics League as a Benchmark for Planning in Robotics
T2  - Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015
Y1  - 2015
SP  - 63
EP  - 68
ER  - 
TY  - CHAP
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A Local Planner for Ackermann-Driven Vehicles in ROS SBPL
T2  - Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/RoboMech.2015.7359518
SP  - 172
EP  - 177
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Gabrielli, Roland Antonius
A1  - Mathies, Johannes
A1  - Großmann, Agnes
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith
T2  - International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
A1  - Breuer, Michael
T1  - Forensische Sicherung von DSLRoutern
T2  - Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Michaux, Frank
A1  - Kallweit, Stephan
A1  - Maeda, Kazuhiro
T1  - Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV
T2  - 11TH International Symposium on Particle Image Velocimetry – PIV15 Santa Barbara, California, September 14-16, 2015
N2  - This study investigates unsteady characteristics of the wake behind a 28%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the
fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.
Y1  - 2015
ER  -