TY  - JOUR
A1  - Pöttgen, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Developing a control strategy for booster stations under uncertain load
JF  - Applied Mechanics and Materials
N2  - Booster stations can fulfill a varying pressure demand with high energy-efficiency, because individual pumps can be deactivated at smaller loads. Although this is a seemingly simple approach, it is not easy to decide precisely when to activate or deactivate pumps. Contemporary activation controls derive the switching points from the current volume flow through the system. However, it is not measured directly for various reasons. Instead, the controller estimates the flow based on other system properties. This causes further uncertainty for the switching decision. In this paper, we present a method to find a robust, yet energy-efficient activation strategy.
KW  - Technical Operations Research (TOR)
KW  - Booster Station
KW  - Pump System
KW  - Discrete Optimization
Y1  - 2015
SN  - 1662-7482
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMM.807.241
N1  - Ebenfalls weltweit einsehbar unter:
http://wl.fst.tu-darmstadt.de/wl/publications/paper_151123_SFB805_
ICUME_Developing_a_Control_Strategy_for_Booster_Stations_under_Uncertain_Load_poettgen_ederer_pelz_altherr.pdf
VL  - 807
IS  - 807
SP  - 241
EP  - 246
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Herrmann, Ulf
A1  - Schorn, Christian
A1  - Schwarzer, Klemens
A1  - Wedding, Philipp
A1  - Weis, Fabian
T1  - Development and Testing of a Novel Method for the Determination of the Efficiency of Concentrating Solar Thermal Collectors
T2  - Conference Proceedings Solar World Congress 2015, Daegu, Korea, 08 – 12 November 2015
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Goßmann, Matthias
A1  - Grosse, J. O.
A1  - Becker, C.
A1  - Heschel, I.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds
JF  - Urologia Internationalis
Y1  - 2015
U6  - http://dx.doi.org/10.1159/000368419
SN  - 0042-1138
VL  - 2015
IS  - 95
SP  - 106
EP  - 113
PB  - Karger
CY  - Basel
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Iken, Heiko
A1  - Selmer, Thorsten
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development of a multi‐parameter sensor chip for the simultaneous detection of organic compounds in biogas processes
JF  - Physica status solidi (a)
N2  - An enzyme-based multi-parameter biosensor is developed for monitoring the concentration of formate, d-lactate, and l-lactate in biological samples. The sensor is based on the specific dehydrogenation by an oxidized β-nicotinamide adenine dinucleotide (NAD+)-dependent dehydrogenase (formate dehydrogenase, d-lactic dehydrogenase, and l-lactic dehydrogenase, respectively) in combination with a diaphorase from Clostridium kluyveri (EC 1.8.1.4). The enzymes are immobilized on a platinum working electrode by cross-linking with glutaraldehyde (GA). The principle of the determination scheme in case of l-lactate is as follows: l-lactic dehydrogenase (l-LDH) converts l-lactate into pyruvate by reaction with NAD+. In the presence of hexacyanoferrate(III), the resulting reduced β-nicotinamide adenine dinucleotide (NADH) is then regenerated enzymatically by diaphorase. The electrochemical detection is based on the current generated by oxidation of hexacyanoferrate(II) at an applied potential of +0.3 V vs. an Ag/AgCl reference electrode. The biosensor will be electrochemically characterized in terms of linear working range and sensitivity. Additionally, the successful practical application of the sensor is demonstrated in an extract from maize silage.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431894
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1306
EP  - 1312
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, Sabrina
A1  - Wu, Chunsheng
A1  - Keusgen, Michael
A1  - Mewes, Dieter
A1  - Schöning, Michael Josef
T1  - DNA Immobilization and Hybridization Detection by the Intrinsic Molecular Charge Using Capacitive Field-Effect Sensors Modified with a Charged Weak Polyelectrolyte Layer
JF  - Applied Materials & Interfaces
N2  - Miniaturized setup, compatibility with advanced micro- and nanotechnologies, and ability to detect biomolecules by their intrinsic molecular charge favor the semiconductor field-effect platform as one of the most attractive approaches for the development of label-free DNA chips. In this work, a capacitive field-effect EIS (electrolyte–insulator–semiconductor) sensor covered with a layer-by-layer prepared, positively charged weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was used for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization. The negatively charged probe single-stranded DNA (ssDNA) molecules were electrostatically adsorbed onto the positively charged PAH layer, resulting in a preferentially flat orientation of the ssDNA molecules within the Debye length, thus yielding a reduced charge-screening effect and a higher sensor signal. Each sensor-surface modification step (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), reducing an unspecific adsorption by a blocking agent, incubation with noncomplementary DNA (ncDNA) solution) was monitored by means of capacitance–voltage and constant-capacitance measurements. In addition, the surface morphology of the PAH layer was studied by atomic force microscopy and contact-angle measurements. High hybridization signals of 34 and 43 mV were recorded in low-ionic strength solutions of 10 and 1 mM, respectively. In contrast, a small signal of 4 mV was recorded in the case of unspecific adsorption of fully mismatched ncDNA. The density of probe ssDNA and dsDNA molecules as well as the hybridization efficiency was estimated using the experimentally measured DNA immobilization and hybridization signals and a simplified double-layer capacitor model. The results of field-effect experiments were supported by fluorescence measurements, verifying the DNA-immobilization and hybridization event.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acsami.5b05146
VL  - 36
IS  - 7
SP  - 20068
EP  - 20075
PB  - American Chemical Society
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Cehreli, Ruksan
A1  - Akpinar, Hale
A1  - Temiz Artmann, Aysegül
A1  - Sagol, Ozgul
T1  - Effects of Glutamine and Omega-3 Fatty Acids on Erythrocyte Deformability and Oxidative Damage in Rat Model of Enterocolitis
JF  - Gastroenterology Research
Y1  - 2015
U6  - http://dx.doi.org/10.14740/gr683w
SN  - 1918-2813
VL  - 8
IS  - 5
SP  - 265
EP  - 273
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Electrostatic Detection of Unlabelled Single- and Double-stranded DNA Using Capacitive Field-effect Devices Functionalized with a Positively Charged Polyelectrolyte Layer
JF  - Procedia Engineering
N2  - Capacitive field-effect electrolyte-insulator-semiconductor sensors consisting of an Al-p-Si-SiO2 structure have been used for the electrical detection of unlabelled single- and double-stranded DNA (dsDNA) molecules by their intrinsic charge. A simple functionalization protocol based on the layer-by-layer (LbL) technique was used to prepare a weak polyelectrolyte/probe-DNA bilayer, followed by the hybridization with complementary target DNA molecules. Due to the flat orientation of the LbL-adsorbed DNA molecules, a high sensor signal has been achieved. In addition, direct label-free detection of in-solution hybridized dsDNA molecules has been studied.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.710
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 544
EP  - 547
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Enzyme logic AND-Reset and OR-Reset gates based on a field-effect electronic transducer modified with multi-enzyme membrane
JF  - Chemical Communications
N2  - Capacitive field-effect sensors modified with a multi-enzyme membrane have been applied for an electronic transduction of biochemical signals processed by enzyme-based AND-Reset and OR-Reset logic gates. The local pH change at the sensor surface induced by the enzymatic reaction was used for the activation of the Reset function for the first time.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C5CC01362C
VL  - 51
SP  - 6564
EP  - 6567
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albracht, Kirsten
A1  - Fasse, Alessandro
A1  - Albin, Thivaharan
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
T1  - Evaluation of an industrial robot as a leg press training device
T2  - XV International Symposium on Computer Simulation in Biomechanics July 9th – 11th 2015, Edinburgh, UK
Y1  - 2015
SP  - 41
EP  - 42
ER  - 
TY  - JOUR
A1  - Pöttgen, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Examination and optimization of a heating circuit for energy-efficient buildings
JF  - Energy Technology
N2  - The conference center darmstadtium in Darmstadt is a prominent example of energy efficient buildings. Its heating system consists of different source and consumer circuits connected by a Zortström reservoir. Our goal was to reduce the energy costs of the system as much as possible. Therefore, we analyzed its supply circuits. The first step towards optimization is a complete examination of the system: 1) Compilation of an object list for the system, 2) collection of the characteristic curves of the components, and 3) measurement of the load profiles of the heat and volume-flow demand. Instead of modifying the system manually and testing the solution by simulation, the second step was the creation of a global optimization program. The objective was to minimize the total energy costs for one year. We compare two different topologies and show opportunities for significant savings.
KW  - energy transfer
KW  - heating system
KW  - programming
KW  - system optimization
KW  - technical operations research
Y1  - 2015
SN  - 2194-4296
U6  - http://dx.doi.org/10.1002/ente.201500252
VL  - 4
IS  - 1
SP  - 136
EP  - 144
PB  - WILEY-VCH Verlag
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Noureddine, Yacine
A1  - Bitz, Andreas
A1  - Ladd, Mark E.
A1  - Thürling, Markus
A1  - Ladd, Susanne C.
A1  - Schaefers, Gregor
A1  - Kraff, Oliver
T1  - Experience with magnetic resonance imaging of human subjects with passive implants and tattoos at 7 T: a retrospective study
JF  - Magnetic Resonance Materials in Physics, Biology and Medicine
Y1  - 2015
U6  - http://dx.doi.org/10.1007/s10334-015-0499-y
SN  - 1352-8661
VL  - 28
IS  - 6
SP  - 577
EP  - 590
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.005
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 123
EP  - 131
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - JOUR
A1  - Mulhern, Colm
A1  - Bialonski, Stephan
A1  - Kantz, Holger
T1  - Extreme events due to localization of energy
JF  - Physical Review E
Y1  - 2015
U6  - http://dx.doi.org/10.1103/PhysRevE.91.012918
SN  - 2470-0053
VL  - 91
IS  - 1
SP  - 012918
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Cordero, Frederico
A1  - Dachwald, Bernd
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Quantius, Dominik
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seefeldt, Patric
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
T1  - From Sail to Soil – Getting Sailcraft Out of the Harbour on a Visit to One of Earth’s Nearest Neighbours
T2  - 4th IAA Planetary Denfense Conference - PDC 2015,  13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Klinge, Uwe
A1  - Otto, Jens
A1  - Mühl, Thomas
T1  - High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain
JF  - BioMed Research International
Y1  - 2015
U6  - http://dx.doi.org/10.1155/2015/953209
SN  - 2314-6133 (Print)
SN  - 2314-6141 (Online)
N1  - Article ID: 953209
VL  - 2015
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Pricking, Sebastian
A1  - Gebs, Raphael
A1  - Fleischhaker, Robert
A1  - Kleinbauer, Jochen
A1  - Budnicki, Aleksander
A1  - Sutter, Dirk
A1  - Killi, Alexander
A1  - Weiler, Sascha
A1  - Mielke, M.
A1  - Beaudou, B.
A1  - Debord, B.
A1  - Gerome, F.
A1  - Benabid, F.
ED  - Dorsch, Friedhelm
T1  - Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier
T2  - High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)
Y1  - 2015
SN  - 978-162841446-2
U6  - http://dx.doi.org/10.1117/12.2079289
SN  - 0277-786X
SP  - 935602
PB  - SPIE, International Society for Optical Engineering
ER  - 
TY  - JOUR
A1  - Geier, Christian
A1  - Bialonski, Stephan
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - How important is the seizure onset zone for seizure dynamics?
JF  - Seizure
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.seizure.2014.10.013
SN  - 1059-1311
VL  - 25
SP  - 160
EP  - 166
ER  - 
TY  - JOUR
A1  - Klettke, Tanja
A1  - Homburg, Carsten
A1  - Gell, Sebastian
T1  - How to measure analyst forecast effort
JF  - European Accounting Review
N2  - We introduce a new way to measure the forecast effort that analysts devote to their earnings forecasts by measuring the analyst's general effort for all covered firms. While the commonly applied effort measure is based on analyst behaviour for one firm, our measure considers analyst behaviour for all covered firms. Our general effort measure captures additional information about analyst effort and thus can identify accurate forecasts. We emphasise the importance of investigating analyst behaviour in a larger context and argue that analysts who generally devote substantial forecast effort are also likely to devote substantial effort to a specific firm, even if this effort might not be captured by a firm-specific measure. Empirical results reveal that analysts who devote higher general forecast effort issue more accurate forecasts. Additional investigations show that analysts' career prospects improve with higher general forecast effort. Our measure improves on existing methods as it has higher explanatory power regarding differences in forecast accuracy than the commonly applied effort measure. Additionally, it can address research questions that cannot be examined with a firm-specific measure. It provides a simple but comprehensive way to identify accurate analysts.
Y1  - 2015
U6  - http://dx.doi.org/10.1080/09638180.2014.909291
SN  - 0963-8180
VL  - 24
IS  - 1
SP  - 129
EP  - 146
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - THES
A1  - Duong, Minh Tuan
T1  - Hyperelastic modeling and soft-tissue growth integrated with the smoothed finite element method - SFEM
Y1  - 2015
N1  - Aachen, Techn. Hochsch., Diss., 2014
PB  - RWTH Aachen University
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Improvement study for the dry-low-NOx hydrogen micromix combustion technology
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.003
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 132
EP  - 140
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Kümmell, Steffen
A1  - Hillgärtner, Michael
T1  - Inductive charging comfortable and nonvisible charging stations for urbanised areas
T2  - E-Mobility in Europe : trends and good practice
N2  - For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today’s state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles’ needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future’s inductive charging infrastructures, several field tests had been carried out and are planned in near future.
KW  - E-mobility
KW  - Inductive charging
KW  - Charging stations
KW  - Urban areas
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_16
SP  - 297
EP  - 309
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Tran, Thanh Ngoc
A1  - Tolba, R. H.
A1  - Staat, Manfred
T1  - Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen
JF  - International biomechanics
Y1  - 2015
U6  - http://dx.doi.org/10.1080/23335432.2015.1049295
SN  - 2333-5432
VL  - Vol. 2
IS  - Iss. 1
SP  - 79
EP  - 88
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Wallenborn, Ramona
T1  - Information and communication technology for integrated mobility concepts such as E-carsharing
T2  - E-Mobility in Europe : trends and good practice
N2  - During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users’ new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.
KW  - Information and communication technology
KW  - Fully connected car
KW  - E-carsharing
KW  - Mobility management
KW  - Integrated mobility
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_17
SP  - 311
EP  - 326
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - CHAP
A1  - Goldmann, Jan-Peter
A1  - Braunstein, Bjoern
A1  - Heinrich, Kai
A1  - Sanno, Maximilian
A1  - Stäudle, Benjamin
A1  - Ritzdorf, Wolfgang
A1  - Brüggemann, Gert-Peter
A1  - Albracht, Kirsten
T1  - Joint work of the take-off leg during elite high jump
T2  - Proceedings of the 33th International Conference on Biomechanics in Sports (ISBS)
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
T1  - Label-free detection of DNA using light-addressable potentiometric sensor modified with a positively charged polyelectrolyte layer
JF  - Nanoscale
N2  - A multi-spot (16 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al–p-Si–SiO2 structure modified with a weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. To achieve a preferentially flat orientation of DNA strands and thus, to reduce the distance between the DNA charge and MLAPS surface, the negatively charged probe single-stranded DNAs (ssDNA) were electrostatically adsorbed onto the positively charged PAH layer using a simple layer-by-layer (LbL) technique. In this way, more DNA charge can be positioned within the Debye length, yielding a higher sensor signal. The surface potential changes in each spot induced due to the surface modification steps (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), non-specific adsorption of mismatched ssDNA) were determined from the shifts of photocurrent–voltage curves along the voltage axis. A high sensor signal of 83 mV was registered after immobilization of probe ssDNA onto the PAH layer. The hybridization signal increases from 5 mV to 32 mV with increasing the concentration of cDNA from 0.1 nM to 5 μM. In contrast, a small signal of 5 mV was recorded in the case of non-specific adsorption of fully mismatched ssDNA (5 μM). The obtained results demonstrate the potential of the MLAPS in combination with the simple and rapid LbL immobilization technique as a promising platform for the future development of multi-spot light-addressable label-free DNA chips with direct electrical readout.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR07225A
VL  - 14
IS  - 7
SP  - 6143
EP  - 6150
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - http://dx.doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Seefeldt, Patric
A1  - Bauer, Waldemar
A1  - Dachwald, Bernd
A1  - Grundmann, Jan Thimo
A1  - Straubel, Marco
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Zander, Martin E.
T1  - Large lightweight deployable structures for planetary defence: solar sail propulsion, solar concentrator payloads, large-scale photovoltaic power
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-20
ER  - 
TY  - JOUR
A1  - Dantism, S.
A1  - Takenaga, S.
A1  - Wagner, P.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Light-addressable Potentiometric Sensor (LAPS) Combined with Multi-chamber Structures to Investigate the Metabolic Activity of Cells
JF  - Procedia Engineering
N2  - LAPS are field-effect-based potentiometric sensors which are able to monitor analyte concentrations in a spatially resolved manner. Hence, a LAPS sensor system is a powerful device to record chemical imaging of the concentration of chemical species in an aqueous solution, chemical reactions, or the growth of cell colonies on the sensor surface, to record chemical images. In this work, multi-chamber 3D-printed structures made out of polymer (PP-ABS) were combined with LAPS chips to analyse differentially and simultaneously the metabolic activity of Escherichia coli K12 and Chinese hamster ovary (CHO) cells, and the responds of those cells to the addition of glucose solution.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.647
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 384
EP  - 387
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Kirschbaum, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide
JF  - Physica status solidi (a)
N2  - Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431944
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1368
EP  - 1374
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Weber, Tobias
T1  - Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts
T2  - Proceedings of SAMPE Europe Conference 2015, Amiens, France
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - PAT
A1  - Stadtmüller, Ralf
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Method for production of single-stranded macronucleotides
N2  - The invention relates to a method for production of single-stranded macronucleotides by amplifying and ligating an extended monomeric single-stranded target nucleic acid sequence (targetss) into a repetitive cluster of double-stranded target nucleic acid sequences (targetds), and subsequently cloning the construct into a vector (aptagene vector). The aptagene vector is transformed into host cells for replication of the aptagene and isolated in order to optain single-stranded target sequences (targetss). The invention also relates to single-stranded nucleic acids, produced by a method of the invention.
Y1  - 2015
N1  - Patent auch unter EP2774996, EP2774996, US2017145460 und US9944966 veröffentlicht.
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  -