TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Berg, Tobias
A1  - Leicht-Scholten, Carmen
T1  - Breaking the habit – new approaches in engineering education
T2  - Proceedings of the 43rd Annual Conference of the European Society for Engineering Education
N2  - Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.
KW  - teaching
KW  - engineering education
KW  - gender and diversity
KW  - best practice
Y1  - 2015
SN  - 978-2-87352-012-0
N1  - Annual Conference of the European Society for Engineering Education , Orléans , France , SEFI , 2015-06-29 - 2015-07-02
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Siegert, Petra
A1  - Iding, Hans
A1  - Baumann, Martin
A1  - McLeish, Michael J.
A1  - Kenyon, George L.
A1  - Pohl, Martina
T1  - Broadening of the substrate spectra of two ThDP-dependent decarboxylases using site-directed-mutagenesis
T2  - Proceedings of the 4th International Congress on Biochemical Engineering : 17 and 18 February 2000, Stuttgart
Y1  - 2000
SN  - 3-8167-5570-4
SP  - 38
EP  - 42
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - https://doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
N1  - In der Druckausgabe des Abstractbandes ist dieser Beitrag lose als Erratum beigefügt.
SP  - 116
EP  - 117
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - https://doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - https://doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - https://doi.org/10.2514/6.2018-5005
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - https://doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1
N2  - The integration of product data from heterogeneous sources and manufacturers into a single catalog is often still a laborious, manual task. Especially small- and medium-sized enterprises face the challenge of timely integrating the data their business relies on to have an up-to-date product catalog, due to format specifications, low quality of data and the requirement of expert knowledge. Additionally, modern approaches to simplify catalog integration demand experience in machine learning, word vectorization, or semantic similarity that such enterprises do not have. Furthermore, most approaches struggle with low-quality data. We propose Attribute Label Ranking (ALR), an easy to understand and simple to adapt learning approach. ALR leverages a model trained on real-world integration data to identify the best possible schema mapping of previously unknown, proprietary, tabular format into a standardized catalog schema. Our approach predicts multiple labels for every attribute of an inpu t column. The whole column is taken into consideration to rank among these labels. We evaluate ALR regarding the correctness of predictions and compare the results on real-world data to state-of-the-art approaches. Additionally, we report findings during experiments and limitations of our approach.
Y1  - 2020
SN  - 978-989-758-440-4
U6  - https://doi.org/10.5220/0009831000900101
N1  - 9th International Conference on Data Science, Technologies and Applications (DATA 2020), 7 - 9 July 2020, online
SP  - 90
EP  - 101
PB  - SciTePress
CY  - Setúbal, Portugal
ER  - 
TY  - CHAP
A1  - Schulte-Fischedick, Jan
A1  - Tamme, Rainer
A1  - Herrmann, Ulf
T1  - CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems
T2  - ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10–14, 2008. - Vol. 2
Y1  - 2009
SN  - 978-0-7918-4320-8
U6  - https://doi.org/doi:10.1115/ES2008-54101
N1  - Paper No. ES2008-54101
SP  - 515
EP  - 524
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Flörke, R.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Characterisation of aseptic sterilisation processes using an electronic nose
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 45
EP  - 45
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Kaspar, K.
A1  - Groebel, Simone
A1  - Kuperjans, Isabel
A1  - Dielmann, Klaus-Peter
A1  - Selmer, Thorsten
T1  - Charakterisierung der Biozönose von Biogasfermentern in Abhängigkeit verschiedener Substrate
T2  - Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabrück, Tagungsband
Y1  - 2013
SN  - 978-3-9813776-3-7
SP  - 69
EP  - 74
PB  - Profair Consult+Project
CY  - Hildesheim
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - Heinol, Horst-Guenther
A1  - Schulte, J.
A1  - Tai, W.
A1  - Zhang, Z.
A1  - Luan, X.
A1  - Fricke, J.
T1  - Charge Transfer Simulation in PMD-Structures
T2  - Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers & Systems, May 18 - 20, 1999, Exhibition Centre Nürnberg/Germany. - Vol. 2
Y1  - 1999
N1  - International Fair and Conference for Sensors, Transducers and Systems <9, 1999, Nürnberg> ; Internationale Messe mit Kongress für Sensoren, Messaufnehmer und Systeme  <9, 1999, Nürnberg>
SP  - 427
EP  - 432
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Zander, W.
A1  - Schubert, J.
A1  - Sukoyan, L. H.
A1  - Begoyan, V.
A1  - Buniatyan, V. V.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 368
EP  - 372
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Sattler, Johannes Christoph
T1  - Choice of solar share of a hybrid power plant of a central receiver system and a biogas plant in dependency of the geographical latitude
T2  - World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Linköping, Sweden / ed.: Bahram Moshfegh
Y1  - 2011
SN  - 9789173930703
SP  - 3710
EP  - 3717
PB  - Univ. Electronic Pr.
CY  - Linköping
ER  - 
TY  - CHAP
A1  - Blanke, Tobias
A1  - Dring, Bernd
A1  - Vontein, Marius
A1  - Kuhnhenne, Markus
T1  - Climate Change Mitigation Potentials of Vertical Building Integrated Photovoltaic
T2  - 8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden
Y1  - 2018
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Hammer, Andreas
A1  - Vieth, Matthias
A1  - Maier, Frank
T1  - Co-Plot as a new multivariate analysis method for operations management research?
T2  - Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter
Y1  - 2005
SN  - 963-218-455-6
SP  - 1007
EP  - 1016
ER  - 
TY  - CHAP
A1  - Dey, Thomas
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Frauenrath, Tobias
A1  - Reke, Michael
A1  - Schiffer, Stefan
ED  - Makedon, Fillia
T1  - CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom
T2  - PETRA '21: Proceedings of the 14th Pervasive Technologies Related to Assistive Environments Conference
N2  - In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.
KW  - embedded hardware
KW  - sensor networks
KW  - information systems
KW  - education
KW  - do-it-yourself
Y1  - 2021
SN  - 9781450387927
U6  - https://doi.org/10.1145/3453892.3462697
N1  - PETRA '21: The 14th PErvasive Technologies Related to Assistive Environments Conference Corfu Greece 29 June 2021- 2 July 2021
SP  - 292
EP  - 299
PB  - Association for Computing Machinery
CY  - New York
ER  - 
TY  - CHAP
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - CogRob 2018 : 
Cognitive Robotics Workshop.
Proceedings of the 11th Cognitive Robotics Workshop 2018
co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018).
Tempe, AZ, USA, October 27th, 2018.
T2  - CEUR workshop proceedings
Y1  - 2019
SN  - 1613-0073
N1  - edited by Gerald Steinbauer, Alexander Ferrein
IS  - Vol-2325
ER  - 
TY  - CHAP
A1  - Lindenlauf, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Cold Boot Attacks on DDR2 and DDR3 SDRAM
T2  - 10th International Conference on Availability, Reliability and Security (ARES) 2015
Y1  - 2015
U6  - https://doi.org/10.1109/ARES.2015.28
SP  - 287
EP  - 292
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Alaydrus, M.
A1  - Streckert, J.
A1  - Hansen, V.
T1  - Combination of the hybrid/sup [2]/-method and the FDTD-method for solution of boundary value problems with electrically large and high-resolution bodies
T2  - IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June
Y1  - 2002
SN  - 0-7803-7330-8
U6  - https://doi.org/10.1109/APS.2002.1018209
SP  - 278
EP  - 281
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Ashikaga, Mitsugu
A1  - Yamaguchi, Masato
A1  - Ogino, Tomoyuki
A1  - Aoki, Shigeki
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine
T2  - Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)
N2  - Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan.
This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 % O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB.
During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 % hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 % O2, and 60 %RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 % compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.
KW  - industrial gas turbine
KW  - combustor development
KW  - fuels
KW  - hydrogen
KW  - emission
Y1  - 2022
SN  - 978-0-7918-8599-4
U6  - https://doi.org/10.1115/GT2022-81620
N1  - ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition
June 13–17, 2022 Rotterdam, Netherlands
PB  - American Society of Mechanical Engineers
CY  - Fairfield
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Yamaguchi, Masato
A1  - Aoki, Shigeki
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine
T2  - Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3B: Combustion, Fuels, and Emissions
N2  - Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion.

KHI, Aachen University of Applied Science, and B&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15%). Hereby, the elementary combustor development was completed.

From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.
KW  - industrial gas turbine
KW  - combustor development
KW  - engine demonstration
KW  - fuels
KW  - hydrogen
Y1  - 2021
U6  - https://doi.org/10.1115/GT2021-59666
N1  - ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. June 7–11, 2021. Virtual, Online.

Paper No: GT2021-59666, V03BT04A014
ER  - 
TY  - CHAP
A1  - Fleischhaker, Robert
A1  - Gebs, Raphael
A1  - Budnicki, Aleksander
A1  - Wolf, M.
A1  - Kleinbauer, Jochen
A1  - Sutter, Dirk H.
T1  - Compact gigawatt-class sub-picosecond Yb:YAG thin-disk regenerative chirped-pulse amplifier with high average power at up to 800 kHz
T2  - Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.
Y1  - 2013
SN  - 978-1-4799-0593-5
U6  - https://doi.org/10.1109/CLEOE-IQEC.2013.6801054
N1  - Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC) <5, 2013, Munich, GE>
PB  - IEEE Computer Society
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft
T2  - AIAA Scitech 2020 Forum
N2  - As battery technologies advance, electric propulsion concepts are on the edge of disrupting aviation markets. However, until electric energy storage systems are ready to allow fully electric aircraft, the combination of combustion engine and electric motor as a hybrid-electric propulsion system seems to be a promising intermediate solution. Consequently, the design space for future aircraft is expanded considerably, as serial-hybrid-, parallel-hybrid-, fully-electric, and conventional propulsion systems must all be considered. While the best propulsion system depends on a multitude of requirements and considerations, trends can be observed for certain types of aircraft and certain types of missions. This paper provides insight into some factors that drive a new design towards either conventional or hybrid propulsion systems. General aviation aircraft, VTOL air taxis, transport aircraft, and UAVs are chosen as case studies. Typical missions for each class are considered, and the aircraft are analyzed regarding their take-off mass and primary energy consumption. For these case studies, a high-level approach is chosen, using an initial sizing methodology. Results indicate that hybrid-electric propulsion systems should be considered if the propulsion system is sized by short-duration power constraints (e.g. take-off, climb). However, if the propulsion system is sized by a continuous power requirement (e.g. cruise), hybrid-electric systems offer hardly any benefit.
Y1  - 2020
U6  - https://doi.org/10.2514/6.2020-1502
N1  - AIAA Scitech 2020 Forum, Driving aerospace solutions for global challenges, Orlando, 06. - 10. January 2020
ER  - 
TY  - CHAP
A1  - Finger, Felix
T1  - Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
T1  - Comparison of 2D dam-break waves with VOF and SPH method
T2  - Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A11113
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Werner, Frederik
A1  - Sawada, Kazuaki
A1  - Schöning, Michael Josef
T1  - Comparison of label-free ACh image sensors based on CCD and LAPS
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/4.2.6
SP  - 356
EP  - 359
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Simon, Nicolai
A1  - Altherr, Lena
T1  - Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study
T2  - Operations Research Proceedings 2019
N2  - To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.
KW  - MINLP
KW  - Powertrain
KW  - Piecewise linearization
KW  - Efficiency optimization
Y1  - 2020
SN  - 978-3-030-48439-2
SN  - 978-3-030-48438-5
U6  - https://doi.org/10.1007/978-3-030-48439-2_55
N1  - Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019
SP  - 457
EP  - 463
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - https://doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
T1  - Comparison of steady-state and transient simulations for solar tower power plants with open-volumetric receiver
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Wolf, Martin R.
A1  - König, Johannes Alexander
ED  - Eibl, Maximilian
ED  - Gaedke, Martin
T1  - Competence Developing Games – Ein Überblick
T2  - INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft für Informatik
N2  - Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu überführen. In diesem Artikel wird der Überbegriff „Competence Developing Games“ definiert und anhand von Beispielen erläutert. Dafür werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erläutert und eine Zuordnung durch-geführt.
KW  - Competence Developing Gam
KW  - Serious Game
KW  - Education
KW  - Gamification
KW  - Bewertungsframework
Y1  - 2017
SN  - 978-3-88579-669-5
U6  - https://doi.org/10.18420/in2017_32
SP  - 385
EP  - 391
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS schooling curricula via contentual taxonomies
T2  - Robotics in Education
N2  - The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - https://doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Complexity for heterogeneous classes: teaching embedded systems using an open project approach
T2  - Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings
Y1  - 2019
SN  - 978-2-87352-018-2
SP  - 540
EP  - 549
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Land, Ingmar
A1  - Hoeher, Peter Adam
A1  - Gligorevic, Snjezana
T1  - Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts
T2  - 5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)
Y1  - 2004
SN  - 3-8007-2802-8
SP  - 195
EP  - 202
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Computing olympic gold: Ski jumping as an example
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
Y1  - 2016
SN  - 978-3-940402-06-6
U6  - https://doi.org/10.17185/duepublico/40821
SP  - 54
EP  - 55
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  -