TY - CHAP A1 - Rendon, Carlos A1 - Schwager, Christian A1 - Ghiasi, Mona A1 - Schmitz, Pascal A1 - Bohang, Fakhri A1 - Chico Caminos, Ricardo Alexander A1 - Teixeira Boura, Cristiano José A1 - Herrmann, Ulf T1 - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming T2 - AIP Conference Proceedings N2 - A 16.77 kW thermal power bayonet-tube reactor for the mixed reforming of methane using solar energy has been designed and modeled. A test bench for the experimental tests has been installed at the Synlight facility in Juelich, Germany and has just been commissioned. This paper presents the solar-heated reactor design for a combined steam and dry reforming as well as a scaled-up process simulation of a solar reforming plant for methanol production. Solar power towers are capable of providing large amounts of heat to drive high-endothermic reactions, and their integration with thermochemical processes shows a promising future. In the designed bayonet-tube reactor, the conventional burner arrangement for the combustion of natural gas has been substituted by a continuous 930 °C hot air stream, provided by means of a solar heated air receiver, a ceramic thermal storage and an auxiliary firing system. Inside the solar-heated reactor, the heat is transferred by means of convective mechanism mainly; instead of radiation mechanism as typically prevailing in fossil-based industrial reforming processes. A scaled-up solar reforming plant of 50.5 MWth was designed and simulated in Dymola® and AspenPlus®. In comparison to a fossil-based industrial reforming process of the same thermal capacity, a solar reforming plant with thermal storage promises a reduction up to 57 % of annual natural gas consumption in regions with annual DNI-value of 2349 kWh/m2. The benchmark solar reforming plant contributes to a CO2 avoidance of approx. 79 kilotons per year. This facility can produce a nominal output of 734.4 t of synthesis gas and out of this 530 t of methanol a day. Y1 - 2020 U6 - https://doi.org/10.1063/5.0029974 N1 - SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 1–4 October 2019, Daegu, South Korea IS - 2303 SP - 170012-1 EP - 170012-9 ER - TY - JOUR A1 - Rieke, Christian A1 - Stollenwerk, Dominik A1 - Dahmen, Markus A1 - Pieper, Martin T1 - Modeling and optimization of a biogas plant for a demand-driven energy supply JF - Energy N2 - Due to the Renewable Energy Act, in Germany it is planned to increase the amount of renewable energy carriers up to 60%. One of the main problems is the fluctuating supply of wind and solar energy. Here biogas plants provide a solution, because a demand-driven supply is possible. Before running such a plant, it is necessary to simulate and optimize the process. This paper provides a new model of a biogas plant, which is as accurate as the standard ADM1 model. The advantage compared to ADM1 is that it is based on only four parameters compared to 28. Applying this model, an optimization was installed, which allows a demand-driven supply by biogas plants. Finally the results are confirmed by several experiments and measurements with a real test plant. Y1 - 2018 U6 - https://doi.org/10.1016/j.energy.2017.12.073 SN - 0360-5442 VL - 145 SP - 657 EP - 664 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Schwager, Christian A1 - Angele, Florian A1 - Schwarzbözl, Peter A1 - Teixeira Boura, Cristiano José A1 - Herrmann, Ulf T1 - Model predictive assistance for operational decision making in molten salt receiver systems T2 - SolarPACES: Solar Power & Chemical Energy Systems N2 - Despite the challenges of pioneering molten salt towers (MST), it remains the leading technology in central receiver power plants today, thanks to cost effective storage integration and high cost reduction potential. The limited controllability in volatile solar conditions can cause significant losses, which are difficult to estimate without comprehensive modeling [1]. This paper presents a Methodology to generate predictions of the dynamic behavior of the receiver system as part of an operating assistance system (OAS). Based on this, it delivers proposals if and when to drain and refill the receiver during a cloudy period in order maximize the net yield and quantifies the amount of net electricity gained by this. After prior analysis with a detailed dynamic two-phase model of the entire receiver system, two different reduced modeling approaches where developed and implemented in the OAS. A tailored decision algorithm utilizes both models to deliver the desired predictions efficiently and with appropriate accuracy. KW - Power plants KW - Associated liquids KW - Decision theory KW - Electrochemistry Y1 - 2023 SN - 978-0-7354-4623-6 U6 - https://doi.org/10.1063/5.0151514 SN - 1551-7616 (online) SN - 0094-243X (print) N1 - SolarPACES: SOLAR POWER & CHEMICAL ENERGY SYSTEMS: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27 September–1 October 2021, Online IS - 2815 / 1 PB - AIP conference proceedings / American Institute of Physics CY - Melville, NY ER - TY - JOUR A1 - Förster, Arnold A1 - Zamdmer, N. A1 - Hu, Qing A1 - Verghese, S. T1 - Mode-Discriminating Photoconductor and Coplanar Wave-Guide Circuits for Picosecond Sampling. Zamdmer, N.; Hu, Qing ; Verghese, S. ; Förster, A. JF - Applied Physics Letters. 74 (1999), H. 7 Y1 - 1999 SN - 1077-3118 SP - 1039 EP - 1041 ER - TY - JOUR A1 - Thielemann, Frank A1 - Kriegesmann, Bernd A1 - Schaffner, M. T1 - Mit vereinten Kräften die Wettbewerbsfähigkeit steigern - Kooperation als Antwort auf den In­novationsdruck . Kriegesmann, B.; Thielemann, F.; Schaffner, M. JF - Der Druckspiegel. 50 (1995), H. 10 Y1 - 1995 SN - 0012-6500 SP - 931 EP - 935 ER - TY - JOUR A1 - Thielemann, Frank T1 - Mit vereinten Kräften JF - Trockenbau, Akustik : Magazin für Planung und Ausführung. 15 (1998), H. 5 Y1 - 1998 SN - 0179-8006 SP - 60 EP - 68 ER - TY - JOUR A1 - Thielemann, Frank T1 - Mit strategischen Allianzen ins nächste Jahrtausend JF - Druckspiegel. 53 (1998), H. 5 Y1 - 1998 SN - 0012-6500 SP - 21 EP - 24 ER - TY - JOUR A1 - Dielmann, Klaus-Peter A1 - Ihle, R. T1 - Mikroturbinen : neue Chancen der Kraft-Wärme-(Kälte-)Kopplung im Leistungsbereich 30 - 200 kW(ind el) / R. Ihle ; K. Dielmann JF - Integrierte Energiesysteme : Chancen im Wettbewerb ; Tagung Nürnberg, 4. und 5. April 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1539) Y1 - 2000 SN - 3-18-091539-0 SP - 245 EP - 266 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Dielmann, Klaus-Peter T1 - Mikrogasturbinen : Technik und Anwendung JF - BWK : das Energie-Fachmagazin . 53 (2001), H. 6 Y1 - 2001 SN - 0006-9612 N1 - 2. ISSN: 1618-193X SP - 6 EP - 9 ER - TY - CHAP A1 - Dielmann, Klaus-Peter A1 - Schieke, Wolf T1 - Mikrogasturbinen - Aufbau und Anwendungen N2 - Mikrogasturbinen: Funktion, Aufbau, Hersteller, Bauformen, Rekuperatorparameter, Besonderheit der Konstruktion, Regelung, Regelbarkeit, Vergleich mit anderen Systemen, Wirkungs- und Nutzungsgrade, Schadstoffemissionen, Nutzung in Kraft-Wärme-Kopplung, Kraft-Wärme-Kälte-Kopplung KW - Gasturbine KW - Mikrogasturbine KW - Micro turbine Y1 - 2000 ER - TY - CHAP A1 - Bouvy, C. A1 - Kuperjans, Isabel T1 - Mikro-Gasturbinen : eine neue Technologie zur Kraft-Wärme-Kopplung in kleinen und mittleren Unternehmen T2 - Entwicklungslinien der Energietechnik 2004 Y1 - 2004 N1 - Themengebiet Rationelle Energieverwendung PB - VDI-Verlag CY - Düsseldorf ET - CD-ROM-Ausg. ER - TY - JOUR A1 - Dielmann, Klaus-Peter A1 - Schieke, W. T1 - Mikro-Gasturbinen : Aufbau und Anwendung JF - Gasturbinen für kombinierte Gas-Dampfturbinenanlagen : und Workshop Advanced Power Plant Processes for Solid Fuels Focussing on Combined Cycles ; Tagung Essen, 13. und 14. September 2000 / VDI-Gesellschaft Energietechnik. - (VDI-Berichte ; 1566) Y1 - 2000 SN - 3-18-091566-8 N1 - Workshop Advanced Power Plant Processes for Solid Fuels Focussing on Combined Cycles <2000, Essen> SP - 187 EP - 210 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Dielmann, Klaus-Peter T1 - Mikro-Gasturbine als Kleinst-BHKW-Bericht über Einsatzerfahrungen JF - Fünftes VWEW-Fachforum Nahwärme 2000 : Wärmedirekt-Service der Energiedienstleistungsunternehmen mit Fachausstellung Nahwärmetechnik 2000 ; 4. und 5. Mai 2000 in Halle Y1 - 2000 N1 - Fachforum Nahwärme <5, 2000, Halle, Saale> ; Verlags- und Wirtschaftsgesellschaft der Elektrizitätswerke SP - 5.1 EP - 5.22 PB - VWEW CY - [Frankfurt, Main] ER - TY - JOUR A1 - Förster, Arnold A1 - Dieker, C. A1 - Gerthsen, D. T1 - Microstructure of the AlAs/GaAs and AlAs/InGaAs resonant tunneling diodes and its correlation with the electrical properties / C. Dieker ; D. Gerthsen ; A. Förster ... JF - Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134) Y1 - 1993 SN - 0-7503-0290-9 N1 - Royal Microscopical Society Conference on Microscopy of Semiconducting Materials <8, 1993, Oxford> ; MSM <8, 1993, Oxford> SP - 253 EP - ff. PB - Institute of Physics CY - Bristol [u.a.] ER - TY - JOUR A1 - Hoyler, Friedrich T1 - Microscopic and semimicroscopic analysis of the reaction 27al- (p,#ga)24mg in the energy range between 20 and 45 mev JF - Physical review / C, nuclear physics. 31 (1985), H. 1 Y1 - 1985 SN - 0556-2813 SP - 17 ER - TY - CHAP A1 - Dielmann, Klaus-Peter A1 - Peters, Bernhard T1 - Micro Turbine Using Different Gases and Liquid Fuels N2 - Micro turbine using different gases and liquid fuels KW - Gasturbine KW - Mikrogasturbine KW - Micro turbine Y1 - 2002 ER - TY - CHAP A1 - Milkova, Kristina A1 - Butenweg, Christoph A1 - Dumova-Jovanoska, Elena T1 - Methodology for development of seismic vulnerability curve for existing unreinforced Masonry buildings T2 - Proceedings of the 17th World Conference on Earthquake Engineering N2 - Seismic behavior of an existing unreinforced masonry building built pre-modern code, located in the City of Ohrid, Republic of North Macedonia has been investigated in this paper. The analyzed school building is selected as an archetype in an ongoing project named “Seismic vulnerability assessment of existing masonry structures in Republic of North Macedonia (SeismoWall)”. Two independent segments were included in this research: Seismic hazard assessment by creating a cite specific response spectra and Seismic vulnerability definition by creating a region - specific series of vulnerability curves for the chosen building topology. A reliable Seismic Hazard Assessment for a selected region is a crucial point for performing a seismic risk analysis of a characteristic building class. In that manner, a scenario – based method that incorporates together the knowledge of tectonic style of the considered region, the active fault characterization, the earth crust model and the historical seismicity named Neo Deterministic approach is used for calculation of the response spectra for the location of the building. Variations of the rupturing process are taken into account in the nucleation point of the rupture, in the rupture velocity pattern and in the istribution of the slip on the fault. The results obtained from the multiple scenarios are obtained as an envelope of the response spectra computed for the cite using the procedure Maximum Credible Seismic Input (MCSI). Capacity of the selected building has been determined by using nonlinear static analysis. MINEA software (SDA Engineering) was used for verification of the structural safety of the chosen unreinforced masonry structure. In the process of optimization of the number of samples, computational cost required in a Monte Carlo simulation is significantly reduced since the simulation is performed on a polynomial response surface function for prediction of the structural response. Performance point, found as the intersection of the capacity of the building and the spectra used, is chosen as a response parameter. Five levels of damage limit states based on the capacity curve of the building are defined in dependency on the yield displacement and the maximum displacement. Maximum likelihood estimation procedure is utilized in the process of vulnerability curves determination. As a result, region specific series of vulnerability curves for the chosen type of masonry structures are defined. The obtained probabilities of exceedance a specific damage states as a result from vulnerability curves are compared with the observed damages happened after the earthquake in July 2017 in the City of Ohrid, North Macedonia. KW - Masonry structures KW - Vulnerability Curves KW - Capacity Curve KW - Neo-Deterministic KW - Seismic Hazard Y1 - 2020 N1 - 17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021 N1 - (Die Konferenz war ursprünglich für den 13-18 September 2020 angesetzt) ER - TY - JOUR A1 - Schmidt, R. A1 - Tonnesmann, A. A1 - Förster, Arnold A1 - Grimm, M. A1 - Kordos, P. A1 - Lüth, H. T1 - Metamorphic InAlAs/InGaAs HEMT's on GaAs substrates using an InP buffer layer JF - 8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications : EDMO 2000 ; [13 - 14 November 2000, University of Glasgow] / organised by Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow Scotland. MTT/ED/AP/LEO Societies Joint Chapter, United Kingdom and Republic of Ireland Section. With technical co-sponsorship from IEEE Electron Device Society Y1 - 2000 SN - 0-7803-6550-X N1 - EDMO <8, 2000, Glasgow> ; University / Department of Electronics and Electrical Engineering ; IEEE catalog number 00TH8534 SP - 95 EP - 98 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - JOUR A1 - Helsper, Christoph T1 - Messverfahren zur Charakterisierung der Abscheidung luftgetragener Partikel in Filtern JF - Schutzmaßnahmen vor mikrobiellen Belastungen des Innenraumes / VII. Lübecker Fachtagung für Umwelthygiene. [Hrsg.:] Reinhard Keller ... Y1 - 2003 N1 - Lübecker Fachtagung für Umwelthygiene <7, 2003, Lübeck> SP - 35 EP - 61 PB - Inst. f. Medizinische Mikrobiologie u. Hygiene d. Med. Univ. CY - Lübeck ER - TY - JOUR A1 - Kern, Alexander A1 - Zischank, Wolfgang J. T1 - Melting effects on metal sheets and air termination wires caused by direct lightning strikes JF - Conference proceedings : Graz, Österreich, 25. - 29. April 1988 / Gesamtorganisation: Österr. Verb. für Elektrotechnik (ÖVE), Fachausschuß Blitzschutz ... [Red.: G. Diendorfer ...] Y1 - 1988 SN - 3-85133-001-3 N1 - International Conference on Lightning Protection >19, 1988, Graz> ; ICLP <19, 1988, Graz> ; Österreichischer Verband für Elektrotechnik / Fachausschuss Blitzschutz PB - Eigenverl. des ÖVE CY - Wien ER - TY - CHAP A1 - Pieper, Martin A1 - Wählisch, Georg T1 - Mehrwert von E-Learning durch fächerübergreifenden Einsatz T2 - Teaching is Touching the Future & ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Prüfen Y1 - 2017 SN - 978-3-946017-05-9 SP - 193 EP - 196 PB - UVW Universitätsverlag Webler CY - Bielefeld ER - TY - JOUR A1 - Meskouris, Konstantin A1 - Butenweg, Christoph A1 - Renault, Philippe T1 - Mehrstufen-Konzept für mehr Erdbebensicherheit : ein Werkzeug für die Beurteilung der Erdbebengefährdung von Ingenieurbauwerken JF - Deutsches Ingenieurblatt Y1 - 2006 SN - 0946-2422 VL - Band 13 IS - Heft 6 SP - 18 EP - 26 ER - TY - CHAP A1 - Nierle, Elisabeth A1 - Pieper, Martin T1 - Measuring social impacts in engineering education to improve sustainability skills T2 - European Society for Engineering Education (SEFI) N2 - In times of social climate protection movements, such as Fridays for Future, the priorities of society, industry and higher education are currently changing. The consideration of sustainability challenges is increasing. In the context of sustainable development, social skills are crucial to achieving the United Nations Sustainable Development Goals (SDGs). In particular, the impact that educational activities have on people, communities and society is therefore coming to the fore. Research has shown that people with high levels of social competence are better able to manage stressful situations, maintain positive relationships and communicate effectively. They are also associated with better academic performance and career success. However, especially in engineering programs, the social pillar is underrepresented compared to the environmental and economic pillars. In response to these changes, higher education institutions should be more aware of their social impact - from individual forms of teaching to entire modules and degree programs. To specifically determine the potential for improvement and derive resulting change for further development, we present an initial framework for social impact measurement by transferring already established approaches from the business sector to the education sector. To demonstrate the applicability, we measure the key competencies taught in undergraduate engineering programs in Germany. The aim is to prepare the students for success in the modern world of work and their future contribution to sustainable development. Additionally, the university can include the results in its sustainability report. Our method can be applied to different teaching methods and enables their comparison. KW - Social impact measurement KW - Key competences KW - Sustainable engineering education KW - Future skills Y1 - 2023 U6 - https://doi.org/10.21427/QPR4-0T22 N1 - 51st Annual Conference of the European Society for Engineering Education, Technological University Dublin, 10th-14th September, 2023 N1 - Corresponding Author: Elisabeth Nierle ER - TY - JOUR A1 - Helsper, Christoph T1 - Measurement Techniques For Ultrafine Particles JF - Ultrafine aerosols. Properties and behaviour. Proceedings of the 1. International Workshop on Ultrafine Aerosols of the Sonderforschungsbereich 209 'Stoff- und Energietransport in Aerosolen' -'Mass and energy transfer in aerosols'-, held at the Univ. of Duisburg on Sept. 29, 1986 Y1 - 1986 N1 - International Workshop on Ultrafine Aerosols ; (01) CY - Duisburg ER - TY - JOUR A1 - Butenweg, Christoph A1 - Gellert, Christoph A1 - Meskouris, Konstantin T1 - Mauerwerkswände unter zyklischer Schubbeanspruchung JF - Mauerwerk : European journal of masonry Y1 - 2007 U6 - https://doi.org/10.1002/dama.200700356 SN - 1437-1022 (E-Journal); 1432-3427 (Print) VL - Volume 11 IS - Issue 6 SP - 356 EP - 362 ER - TY - CHAP A1 - Butenweg, Christoph A1 - Bollenbeck, S. T1 - Mauerwerksbauten unter Erdbebenbelastung T2 - Bauwerke und Erdbeben Y1 - 2003 SN - 3-528-02574-3 SP - 385 EP - 397 PB - Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Meskouris, Konstantin A1 - Mistler, Michael A1 - Butenweg, Christoph T1 - Mauerwerksbauten unter Erdbebenbelastung T2 - Numerische Methoden zur Problemlösung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006 Y1 - 2006 PB - IBAC CY - Aachen ER - TY - CHAP A1 - Butenweg, Christoph A1 - Bollenbeck, S. T1 - Mauerwerksbauten T2 - Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen Y1 - 2003 SN - 3-528-02574-3 (Print) ; 978-3-322-96831-9 (E-Book) U6 - https://doi.org/10.1007/978-3-322-96831-9_7 SP - 385 EP - 397 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - BOOK A1 - Budelmann, Harald A1 - Butenweg, Christoph ED - Gunkler, Erhard T1 - Mauerwerksbau: Bemessung und Konstruktion : Baustoffe, Bemessung und Ausführung, Brandschutz und Erdbeben, Nachhaltigkeit, Bewertung und Revitalisierung Y1 - 2019 SN - 978-3-8462-0371-2 N1 - gedruckt in der Bereichsbibliothek Bayernallee vorhanden PB - Bundesanzeiger Verlag CY - Köln ET - 2. überarbeitete und aktualisierte Auflage ER - TY - BOOK A1 - Pieper, Martin T1 - Mathematische Optimierung: Eine Einführung in die kontinuierliche Optimierung mit Beispielen Y1 - 2017 SN - 978-3-658-16975-6 U6 - https://doi.org/10.1007/978-3-658-16975-6 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Geisler, Simon A1 - Pieper, Martin T1 - Mathematik PLuS als E-Book. Kann ein E-Book zur Ingenieursmathematik alle Lerntypen ansprechen? T2 - Das elektronische Schulbuch 2016 Y1 - 2017 SN - 978-3-643-13475-2 SP - 99 EP - 111 PB - LIT Verlag CY - Berlin ER - TY - JOUR A1 - Butenweg, Christoph A1 - Marinkovic, Marko A1 - Kubalski, Thomas A1 - Klinkel, Sven T1 - Masonry infilled reinforced concrete frames under horizontal loading T1 - Stahlbetonrahmen mit Ausfachungen aus Mauerwerk unter horizontalen Belastungen JF - Mauerwerk N2 - The behaviour of infilled reinforced concrete frames under horizontal load has been widely investigated, both experimentally and numerically. Since experimental tests represent large investments, numerical simulations offer an efficient approach for a more comprehensive analysis. When RC frames with masonry infill walls are subjected to horizontal loading, their behaviour is highly non-linear after a certain limit, which makes their analysis quite difficult. The non-linear behaviour results from the complex inelastic material properties of the concrete, infill wall and conditions at the wall-frame interface. In order to investigate this non-linear behaviour in detail, a finite element model using a micro modelling approach is developed, which is able to predict the complex non-linear behaviour resulting from the different materials and their interaction. Concrete and bricks are represented by a non-linear material model, while each reinforcement bar is represented as an individual part installed in the concrete part and behaving elasto-plastically. Each brick is modelled individually and connected taking into account the non-linearity of a brick mortar interface. The same approach is followed using two finite element software packages and the results are compared with the experimental results. The numerical models show a good agreement with the experiments in predicting the overall behaviour, but also very good matching for strength capacity and drift. The results emphasize the quality and the valuable contribution of the numerical models for use in parametric studies, which are needed for the derivation of design recommendations for infilled frame structures. Y1 - 2016 U6 - https://doi.org/10.1002/dama.201600703 SN - 1437-1022 VL - 20 IS - 4 SP - 305 EP - 312 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Hellmanns, Mark A1 - Böhm, Stefan A1 - Dilger, Klaus T1 - Manual applications of adhesives JF - Journal of adhesion and interface Y1 - 2006 VL - Vol. 7 IS - No. 4 SP - 24 EP - 27 ER - TY - GEN A1 - Steuer-Dankert, Linda A1 - Bernhard, Sebastian A1 - Langolf, Jessica A1 - Leicht-Scholten, Carmen T1 - Managing change and acceptance of digitalization strategies - Implementing the vision of „Internet of Production“ (IoP) in existing corporate structures T2 - Textile Impulse für die Zukunft: Aachen-Dresden-Denkendorf International Textile Conference 2022 N2 - The vision of the Internet of Production is to enable a new level of crossdomain collaboration by providing semantically adequate and context-aware data from production, development & usage in real-time. Y1 - 2022 N1 - Textile Impulse für die Zukunft: Aachen-Dresden-Denkendorf International Textile Conference 2022 : 1. – 2. Dezember 2022, Eurogress Aachen SP - 153 EP - 153 ER - TY - CHAP A1 - Goldbach, Daniel T1 - Management der funktionalen Sicherheit einer Entwicklung eines sicherheitskritischen Systems im Bereich Nutzfahrzeuge T2 - Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, Kaiserslautern / K. Berns ... (ed.) Y1 - 2010 SN - 978-3-8322-9040-5 SP - 487 EP - 495 PB - Shaker CY - Aachen ER - TY - RPRT A1 - Dielmann, Klaus-Peter A1 - Ertl, Karl-Heinz T1 - MAK-Energie: Reinigung und energetische Verwertung von Klärgas durch den Einsatz einer Mikrogasturbine gekoppelt mit einer Adsorptionskältemaschine : Abschlussbericht Y1 - 2013 PB - Institut NOWUM-Energy CY - Jülich ER - TY - JOUR A1 - Bechstedt, U. A1 - Haas, H. A1 - Hacker, U. A1 - Hardt, Arno A1 - Henn, K. A1 - Martin, S. A1 - Wimmer, J. T1 - Magnets for the German Spallation Source SNQ JF - IEEE transactions on nuclear science. Vol. 32, iss. 5 Y1 - 1985 SN - 1558-1578 (E-Journal); 0018-9499 (Print) SP - 3631 EP - 3633 ER - TY - JOUR A1 - Förster, Arnold A1 - Betko, J. A1 - Morvic, M. A1 - Novak, J. T1 - Magnetoresistance in low-temperature grown molecular-beam epitaxial GaAs. Betko, J.; Morvic, M.; Novak, J.; Förster, A.; Kordos, P. JF - Journal of Applied Physics. 86 (1999), H. 11 Y1 - 1999 SN - 1089-7550 SP - 6243 EP - 6248 ER - TY - CHAP A1 - Zischank, Wolfgang J. A1 - Heidler, Fridolin A1 - Wiesinger, J. A1 - Stimper, K. A1 - Kern, Alexander A1 - Seevers, M. T1 - Magnetic Fields and Induced Voltages inside LPZ 1 Measured at a 1:6 Scale Model Building N2 - Laborexperimente zu Blitzschutzzonen in Stahlbetongebäuden anhand eines Modells im Maßstab 1:6 N2 - For the application of the concept of Lightning Protection Zones (LPZ), the knowledge of the magnetic fields and induced voltages inside a structure is necessary. Laboratory experiments have been conducted at a downscaled model of a building (scale factor 1:6) to determine these electromagnetic quantities in case of a direct strike to the structure. The model (3 m x 2 m x 2 m) represented a small industrial building using the reinforcement of the concrete as electromagnetic shield. The magnetic fields and magnetic field derivatives were measured at several location inside the scaled model. Further, the voltages induced on three typical cable routes inside the model was determined. The influence of the lightning current waveshape, point-of-strike, bonding of the cable routes, and bridging of an expansion joint in the middle of the building on these quantities was studied. KW - Blitzschlag KW - Elektromagnetischer Schutzschild KW - Stahlbeton KW - Maßstabsgetreues Modell KW - Lightning KW - electromagnetic shielding KW - reinforced concrete KW - scaled model Y1 - 2004 ER - TY - CHAP A1 - Kern, Alexander A1 - Heidler, Fridolin A1 - Seevers, M. A1 - Zischank, Wolfgang J. T1 - Magnetic Fields and Induced Voltages in case of a Direct Strike - Comparison of Results obtained from Measurements at a Scaled Building to those of IEC 62305-4 N2 - In the paper the results obtained from experiments at a modelled reinforced building in case of a direct lightning strike are compared with calculations. The comparison includes peak values of the magnetic field Hmax, its derivative (dH/dt)max and of induced voltages umax in typical cable routings. The experiments are performed at a 1:6 scaled building and the results are extrapolated using the similarity relations theory. The calculations are based on the approximate formulae given in IEC 62305-4 and have to be supplemented by a rough estimation of the additional shielding effect of a second reinforcement layer. The comparison shows, that the measured peak values of the magnetic field and its derivative are mostly lower than the calculated. The induced voltages are in good agreement. Hence, calculations of the induced voltages based on IEC 62305-4 are a good method for lightning protection studies of buildings, where the reinforcement is used as a grid-like electromagnetic shield. N2 - Auswirkungen eines direkten Blitzeinschlages auf ein Gebäude, Vergleich von experimentellen Ergebnissen und Berechnungen basierend auf einer Formel aus der IEC 62305-4 KW - Blitz KW - Direkter Blitzschlag KW - Elektromagnetischer Schutzschild KW - Magnetische Felder KW - Induzierte Spannungen KW - Kalkulation KW - Direct lightning strike KW - electromagnetic shield KW - magnetic fields KW - induced voltages KW - calculations Y1 - 2004 SN - 0304-3886 N1 - Journal of electrostatics: Beitr. auf S. 379 - 385. doi:10.1016/j.elstat.2006.09.004 ER - TY - CHAP A1 - Giresini, Linda A1 - Butenweg, Christoph A1 - Andreini, M. A1 - De Falco, A. A1 - Sassu, M. T1 - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna T2 - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City Y1 - 2014 SP - 1 EP - 12 ER - TY - JOUR A1 - Kern, Alexander A1 - Zischank, Wolfgang J. T1 - Längsspannung an blitzstromdurchflossenen Schirmkabeln - Einfluß paralleler Entlastungsleitungen JF - Elektrie : wissenschaftlich-technische Zeitschrift der Elektrotechnik. 47 (1993), H. 6 Y1 - 1993 SN - 0013-5399 N1 - 2. ISSN: 0013-5400 ER - TY - JOUR A1 - Förster, Arnold A1 - Mikulics, M. A1 - Marso, M. A1 - Adam, R. T1 - Low-temperature-grown MBE GaAs for terahertz photomixers. Mikulics, M.; Marso, M.; Adam, R.; Fox, A.; Buca, D.; Förster, A.; Kordos, P.; Xu, Y.; Sobolewski, R. JF - 2001 Symposium on Electron Devices for Microwave and Optoelectronic Applications ; [Vienna University of Technology, Institute of Electrical Measurements and Circuit Design, 15 - 16 November 2001, Vienna, Austria ; proceedings] / EDMO 2001. Organised by: Institute of Electrical Measurements and Circuit Design, Vienna University of Technology, Austria. With technical co-sponsorship from IEEE Electron Devices Society Y1 - 2001 SN - 078037049X N1 - IEEE catalog number: 01TH8567 SP - 155 EP - 155 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - JOUR A1 - Förster, Arnold A1 - Janssen, G. A1 - Roer, T. G. van de T1 - Logic Circuits with reduced complexity based on devices with higher functionality / G. Janssen ; T. G. van de Roer ; W. Prost ... A. Förster JF - Proceedings / STW/SAFE 2nd Annual Workshop on Semiconductor Advances for Future Electronics, Safe '99 - ProRISC/IEEE 10th Annual Workshop on Circuits, Systems and Signal Processing, ProRISC 99 : November 24 - 26, 1999, Mierlo, The Netherlands [Elektronische Ressource] Y1 - 1999 N1 - SAFE <2, 1999, Mierlo> ; Workshop on Circuits, Systems and Signal Processing <10, 1999, Mierlo> ; Stichting voor de Technische Wetenschappen SP - 219 PB - Technology Foundation, STW CY - Utrecht ER - TY - JOUR A1 - Böhm, Stefan A1 - Hellmanns, Mark A1 - Backes, Andreas A1 - Dilger, Klaus T1 - Lock-in thermography based NDT of parts for the automotive industry JF - Journal of adhesion and interface Y1 - 2006 VL - Vol. 7 IS - No. 4 SP - 10 EP - 12 ER - TY - CHAP A1 - Böhm, Stefan A1 - Hellmanns, Mark A1 - Backes, Andreas A1 - Dilger, Klaus T1 - Lock-in thermography based NDT of automotive parts T2 - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China Y1 - 2006 SP - 382 EP - 384 PB - Beijing Adhesion Society of China CY - Beijing ER - TY - RPRT A1 - Ghinaiya, Jagdishkumar A1 - Lehmann, Thomas A1 - Göttsche, Joachim T1 - LOCAL+ – ein kreislauffähiger Holzmodulbau mit nachhaltigem Energie- und Wohnraumkonzept T2 - Bauphysik N2 - Mit dem Beitrag des Teams der FH Aachen zum SDE 21/22 wird im Projekt LOCAL+ ein kreislauffähiger Holzmodulbau mit einem innovativen Wohnraumkonzept geplant und umgesetzt. Ziel dieses Konzeptes ist die Verringerung des stetig steigenden Wohnflächenbedarfs durch ein Raum-in-Raum Konzept. Gebäudetechnisch wird in dem Projekt nicht nur das Einzelgebäude betrachtet, sondern unter Berücksichtigung des Gebäudebestandes wird für das Quartier ein innovatives und nachhaltiges Energiekonzept entwickelt. Ein zentrales Wasserstoffsystem ist für ein Quartier geplant, um den Stromverbrauch aus dem Netz im Winter zu reduzieren. Zentraler Bestandteil des TGA-Konzepts ist ein unterirdischer Eisspeicher, eine PVT und eine Wärmepumpe mit intelligenter Regelstrategie. Ein Teil des neuen Gebäudes (Design Challenge DC) wird in Wuppertal als Hausdemonstrationseinheit (HDU) präsentiert. Eine hygrothermische Simulation der HDU wurde mit der WUFI-Software durchgeführt. Da im Innenraum Lehmmodule und -platten als Feuchtigkeitspuffer verwendet werden, spielen die Themen Feuchtigkeit, Holzfäule und Schimmelwachstum eine wichtige Rolle. KW - Energiekonzept KW - Gesamtwassergehalt KW - Feuchtigkeit KW - Verdunstungskälte KW - energy concept Y1 - 2022 U6 - https://doi.org/10.1002/bapi.202200010 SN - 0171-5445 (Print) SN - 1437-0980 (Online) VL - 44 IS - 3 SP - 136 EP - 142 PB - Ernst & Sohn CY - Hoboken ER - TY - JOUR A1 - Bouquegneau, Christian A1 - Kern, Alexander A1 - Rousseau, Alain T1 - Lightning safety guidelines Y1 - 2010 N1 - Ground´2010 International Conference on Grounding and Earthing ; 4th International Conference ond Lightning Physics and Effects, Nov. 2010 Salvador - Brazil SP - 1 EP - 6 ER - TY - JOUR A1 - Kern, Alexander A1 - Krichel, Frank A1 - Neskakis, Apostolos A1 - Müller, Klaus-Peter (u.a.) T1 - Lightning protection design of a renewable energy hybrid-system without power mains connection Y1 - 2001 N1 - International Conference on Renewable Energies for Islands <2001, Crete> ER - TY - CHAP A1 - Kern, Alexander A1 - Krichel, Frank A1 - Müller, Klaus-Peter T1 - Lightning protection design of a renewable energy hybrid-system without power mains connection N2 - In the year 2000 a direct lightning strike to the hybridsystem without power mains connection VATALI on the Greek island Crete results in the destruction and damage of some mechanical and electrical components. The hybrid-system VATALI was not lightning protected at that time. The hardware damage costs are approx. 60,000 €. The exposed site of the hybrid-system on top of a mountain was and still is the reason for a high risk of lightning strikes. Also in the future further lightning strikes have to be taken into consideration. In the paper a fundamental lightning protection design concept for renewable energy hybrid-systems without power mains connection and protection measures against direct strikes and overvoltages are shown in detail. The design concept was realized exemplarily for the hybrid-system VATALI. The hardware costs for the protection measures were about 15,000 €. About 50% of the costs are due to protection measures against direct strikes, 50% are due to overvoltage protection. Future extensions, new installations, or modifications have to be included into the lightning protection design concept of the hybrid-system. KW - Blitzschutz KW - Erneuerbare Energien KW - Hybridsystem KW - Lightning protection KW - Renewable energy KW - hybrid-system Y1 - 2001 ER -