TY  - JOUR
A1  - Sattler, Johannes Christoph
A1  - Röger, Marc
A1  - Schwarzbözl, Peter
A1  - Buck, Reiner
A1  - Macke, Ansgar
A1  - Raeder, Christian
A1  - Göttsche, Joachim
T1  - Review of heliostat calibration and tracking control methods
JF  - Solar Energy
N2  - Large scale central receiver systems typically deploy between thousands to more than a hundred thousand heliostats. During solar operation, each heliostat is aligned individually in such a way that the overall surface normal bisects the angle between the sun’s position and the aim point coordinate on the receiver. Due to various tracking error sources, achieving accurate alignment ≤1 mrad for all the heliostats with respect to the aim points on the receiver without a calibration system can be regarded as unrealistic. Therefore, a calibration system is necessary not only to improve the aiming accuracy for achieving desired flux distributions but also to reduce or eliminate spillage. An overview of current larger-scale central receiver systems (CRS), tracking error sources and the basic requirements of an ideal calibration system is presented. Leading up to the main topic, a description of general and specific terms on the topics heliostat calibration and tracking control clarifies the terminology used in this work. Various figures illustrate the signal flows along various typical components as well as the corresponding monitoring or measuring devices that indicate or measure along the signal (or effect) chain. The numerous calibration systems are described in detail and classified in groups. Two tables allow the juxtaposition of the calibration methods for a better comparison. In an assessment, the advantages and disadvantages of individual calibration methods are presented.
Y1  - 2020
U6  - https://doi.org/10.1016/j.solener.2020.06.030
VL  - 207
SP  - 110
EP  - 132
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Wurm, Patrick
T1  - Mission analysis and performance comparison for an Advanced Solar Photon Thruster
JF  - Advances in Space Research
Y1  - 2011
SN  - 0273-1177
VL  - 48
IS  - 11
SP  - 1858
EP  - 1868
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - https://doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Buniatyan, V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel Bernhard
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
A1  - Glück, Olaf
A1  - Thust, Marion
T1  - Electrochemical methods for the determination of chemical variables in aqueous media
T2  - Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement
Y1  - 2014
SN  - 978-1-4398-4891-3
SP  - 55-1
EP  - 55-54
PB  - CRC Pr.
CY  - Boca Raton, Fla.
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - CHAP
A1  - Chanson, Hubert
A1  - Bung, Daniel Bernhard
A1  - Matos, J.
T1  - Stepped spillways and cascades
T2  - Energy dissipation in hydraulic structures / Hubert Chanson (ed.)
Y1  - 2015
SN  - 978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)
SP  - 45
EP  - 64
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - ERIKA—Early Robotics Introduction at Kindergarten Age
JF  - Multimodal Technologies Interact
N2  - In this work, we report on our attempt to design and implement an early introduction to basic robotics principles for children at kindergarten age. One of the main challenges of this effort is to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. The humanoid robot Pepper from Softbank, which is a great platform for human–robot interaction experiments, was used to present a lecture on robotics by reading out the contents to the children making use of its speech synthesis capability. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. In this quiz, two LEGO Mindstorm EV3 robots were used to implement a strongly interactive scenario. Besides the thrill of being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. We got very positive feedback from the children as well as from their educators. To the best of our knowledge, this is one of only few attempts to use a robot like Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents.
Y1  - 2018
U6  - https://doi.org/10.3390/mti2040064
SN  - 2414-4088
VL  - 2
IS  - 4
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Schwabedal, Justus T. C.
A1  - Sippel, Daniel
A1  - Brandt, Moritz D.
A1  - Bialonski, Stephan
T1  - Automated Classification of Sleep Stages and EEG Artifacts in Mice with Deep Learning
N2  - Sleep scoring is a necessary and time-consuming task in sleep studies. In animal models (such as mice) or in humans, automating this tedious process promises to facilitate long-term studies and to promote sleep biology as a data-driven f ield. We introduce a deep neural network model that is able to predict different states of consciousness (Wake, Non-REM, REM) in mice from EEG and EMG recordings with excellent scoring results for out-of-sample data. Predictions are made on epochs of 4 seconds length, and epochs are classified as artifactfree or not. The model architecture draws on recent advances in deep learning and in convolutional neural networks research. In contrast to previous approaches towards automated sleep scoring, our model does not rely on manually defined features of the data but learns predictive features automatically. We expect deep learning models like ours to become widely applied in different fields, automating many repetitive cognitive tasks that were previously difficult to tackle.
Y1  - 2018
U6  - https://doi.org/10.48550/arXiv.1809.08443
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Mataré, Victor
A1  - Neumann, Tobias
A1  - Schönitz, Sebastian
A1  - Henke, Christoph
A1  - Limpert, Nicolas
A1  - Niemueller, Tim
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017
Y1  - 2018
SN  - 978-3-030-00308-1
U6  - https://doi.org/10.1007/978-3-030-00308-1_40
N1  - Lecture Notes in Computer Science, vol 11175
SP  - 486
EP  - 497
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Holtrup, S.
A1  - Sadeghfam, Arash
A1  - Heuermann, Holger
A1  - Awakowicz, P.
T1  - Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters
JF  - IEEE transactions on microwave theories and techniques
N2  - High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.
Y1  - 2014
U6  - https://doi.org/10.1109/TMTT.2014.2342652
SN  - 0018-9480
VL  - 62
IS  - 10
SP  - 2471
EP  - 2480
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - JOUR
A1  - Ritz, Thomas
T1  - Mass Customized Production of Information Services - The combination of economies-of-scale with economies-of-scope
JF  - Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard
Y1  - 2002
SN  - 0-8058-4165-2
N1  - World Media Economics Conference (5, 2002, Turku)
PB  - Erlbaum
CY  - Mahwah, NJ [u.a.]
ER  - 
TY  - JOUR
A1  - Rösch, C.
A1  - Kratz, F.
A1  - Hering, T.
A1  - Trautmann, S.
A1  - Umanskaya, N.
A1  - Tippkötter, Nils
A1  - Müller-Renno, C.M.
A1  - Ulber, Roland
A1  - Hannig, M.
A1  - Ziegler, C.
T1  - Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity
JF  - Colloids and Surfaces B: Biointerfaces
N2  - The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.
Y1  - 2016
U6  - https://doi.org/10.1016/j.colsurfb.2016.09.048
VL  - 149
IS  - 1
SP  - 115
EP  - 121
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Siegert, Petra
A1  - Willenberg, H.
A1  - Poghossian, Arshak
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Substrate Recycling Amplification
JF  - Procedia Engineering
N2  - An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.708
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 540
EP  - 543
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Winkelmann, Axel
A1  - Knackstedt, Ralf
T1  - Towards a Contingency Theory based Model of the Influence of Regulation on MIS
T2  - Proceedings of the Seventeenth Americas Conference on Information Systems, Detroit, Michigan August 4th -7 th 2011
Y1  - 2011
ER  - 
TY  - BOOK
A1  - Laack, Walter van
T1  - Nobody ever dies! / 1. ed.
Y1  - 2000
SN  - 978-3-936624-03-8
PB  - van Laack
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Niemüller, Tim
A1  - Ferrein, Alexander
A1  - Beck, Daniel
A1  - Lakemeyer, Gerhard
T1  - Design Principles of the Component-Based Robot Software Framework Fawkes
JF  - Simulation, Modeling, and Programming for Autonomous Robots
Y1  - 2010
N1  - Lecture Notes in Computer Science ; 6472 ; Second International Conference, SIMPAR 2010, Darmstadt, Germany, November 15-18, 2010. Proceedings
SP  - 300
EP  - 311
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - On the Way to High-Level Programming for Resource-Limited Embedded Systems with Golog
JF  - Simulation, Modeling, and Programming for Autonomous Robots
Y1  - 2010
N1  - Lecture Notes in Computer Science ; 6472 ; Second International Conference, SIMPAR 2010, Darmstadt, Germany, November 15-18, 2010. Proceedings
SP  - 229
EP  - 240
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
T1  - Robot controllers for highly dynamic environments with real-time constraints
JF  - Künstliche Intelligenz : KI. 24 (2010), H. 2
Y1  - 2010
SN  - 1610-1987
SP  - 175
EP  - 178
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
ED  - Artmann, Gerhard
ED  - Temiz Artmann, Aysegül
ED  - Zhubanova, Azhar A.
ED  - Digel, Ilya
T1  - Mechanics of soft tissue reactions to textile mesh implants
T2  - Biological, Physical and Technical Basics of Cell Engineering
N2  - For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.
Y1  - 2018
SN  - 978-981-10-7904-7
U6  - https://doi.org/10.1007/978-981-10-7904-7_11
SP  - 251
EP  - 275
PB  - Springer
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Self-Adjoint Operator
JF  - Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.
Y1  - 2009
SN  - 978-3-540-70622-9
SP  - 692
EP  - 697
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Unitary Operator
JF  - Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.
Y1  - 2009
SN  - 978-3-540-70622-9
SP  - 807
EP  - 809
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Projection
JF  - Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.
Y1  - 2009
SN  - 978-3-540-70622-9
SP  - 497
EP  - 499
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Cherstvy, Andrey G.
A1  - Pedraza, Angela M.
A1  - Ingebrandt, Sven
A1  - Schöning, Michael Josef
T1  - Label-free electrical detection of DNA by means of field-effect nanoplate capacitors: Experiments and modeling
JF  - Physica Status Solidi (a)
N2  - Label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization/denaturation by means of an array of individually addressable field-effect-based nanoplate silicon-on-insulator (SOI) capacitors modified with gold nanoparticles (Au-NP) is investigated. The proposed device detects charge changes on Au-NP/DNA hybrids induced by the hybridization or denaturation event. DNA hybridization was performed in a high ionic-strength solution to provide a high hybridization efficiency. On the other hand, to reduce the screening of the DNA charge by counter ions and to achieve a high sensitivity, the sensor signal induced by the hybridization and denaturation events was measured in a low ionic-strength solution. High sensor signals of about 120, 90, and 80 mV were registered after the DNA hybridization, denaturation, and re-hybridization events, respectively. Fluorescence microscopy has been applied as reference method to verify the DNA immobilization, hybridization, and denaturation processes. An electrostatic charge-plane model for potential changes at the gate surface of a nanoplate field-effect sensor induced by the DNA hybridization has been developed taking into account both the Debye length and the distance of the DNA charge from the gate surface.
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100710
SN  - 1862-6319
VL  - 209
SP  - 925
EP  - 934
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Laack, Walter van
T1  - Therefore Fermat is right
JF  - American journal of humanities and social sciences : AJHSS
N2  - It was Fernat's idea to investigate how many numbers would fulfill the equation according to the Pythagorean Theorem if the exponent were increased to random, e.g. to a3 + b3 = c3. His question became therefore: are there two whole numbers the cubes of which add up to the volume of the cube of a third whole number? He posed this same question, of course, for all kinds of higher exponents, so that the equation could be generalized: is there an integral solution for the equation an + bn = cn, if the exponent n is higher than 2? Although in 1993, the English mathematician Andrew Wiles was able to produce an arithmetical proof for Fermat's famous theorem, I will show that there is a simple logical explanation which is also pragmatic and plausible and what is the result of a fundamental alternative idea how our world seems to be constructed.
Y1  - 2014
SN  - 2329-079X (E-Journal); 2329-0781 (Print)
VL  - 2
IS  - 2
SP  - 117
EP  - 120
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Aspects of the Quantum-Classical Connection Based on Statistical Maps
JF  - Foundations of Physics
Y1  - 2019
U6  - https://doi.org/10.1007/s10701-019-00269-9
VL  - 49
IS  - 6
SP  - 677
EP  - 692
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Operator
JF  - Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.
Y1  - 2009
SN  - 978-3-540-70622-9
SP  - 440
EP  - 444
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Ibrahim, Irfan
T1  - Novel theory and architecture of a vector signal generator implemented with two PLLs / Ibrahim, Irfan ; Heuermann, Holger
JF  - European Conference on Wireless Technology, 2008. EuWiT 2008.
Y1  - 2008
SN  - 978-2-87487-008-8
SP  - 85
EP  - 88
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
A1  - Busch, P.
A1  - Hellwig, K.-E.
T1  - Classical Representations of Finite-Dimensional Quantum Mechanics. Busch, P.; Hellwig, K.-E.; Stulpe, W.
JF  - International Journal of Theoretical Physics. 32 (1993), H. 3
Y1  - 1993
SN  - 1572-9575
SP  - 399
EP  - 405
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - Dual mode radio: A new tranceiver architecture for UWB and 60 GHz-applications
JF  - European Conference on Wireless Technology, 2008. EuWiT 2008.
Y1  - 2008
SN  - 978-2-87487-008-8
SP  - 147
EP  - 150
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Krämer, Melina
A1  - Abouzar, Maryam H.
A1  - Pita, Marcos
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Interfacing of biocomputing systems with silicon chips: Enzyme logic gates based on field-effect devices
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 682
EP  - 685
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
A1  - Glück, Olaf
A1  - Thust, Marion
T1  - Electrochemical composition measurement
T2  - Measurement, instrumentation, and sensors handbook: electromagnetic, optical, radiation, chemical, and biomedical measuremen
Y1  - 2014
SN  - 978-1-4398-4891-3
SP  - 55-1
EP  - 55-54
PB  - CRC Pr.
CY  - Boca Raton, Fa.
ET  - 2nd ed.
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Geissler, Hanno
A1  - Schöning, Michael Josef
T1  - Rapid methods and sensors for milk quality monitoring and spoilage detection
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2019.04.040
SN  - 0956-5663
VL  - 140
IS  - Article 111272
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Kessler, Julia
T1  - Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab
T2  - Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
Y1  - 2017
U6  - https://doi.org/10.1051/matecconf/201713702013
SN  - 2261-236X
N1  - MATEC Web Conf.
Volume 137, 2017
Matec Web of Conferences., 137(2017)02013
ER  - 
TY  - JOUR
A1  - Laack, Walter van
T1  - Nature is much smarter than expected: the Genetic Code is not degenerate
JF  - American journal of humanities and social sciences
N2  - In any books about genetics it can still today be read that our genetic code is called “degenerate” because it is still believed that 43 = 64 triplets encode the 20 essential amino acids. Indeed we have to assume the inverse law, what means that 34 = 81 exact code positions are really effective for our genetic code and encode the amino acids, compiled to proteins. This very important discovery leads to two completely new results that are limits-overlooking: 1) 34 (=81) genetic code positions mean exactly the same number as there are stable and naturally existing chemical elements in our universe. This famous argument should now lead to some alternative, as well as new fundamental conclusions about our existence. 2) A genetic code positioning system shows that nature is much smarter than expected: mutations are made less dangerous than believed, because they won't be that easily able any more to cause severe damages in the protein-synthesis. This should also lead to some alternative views upon evolution of life.
Y1  - 2014
SN  - 2329-0781 (Print) ; 2329-079X (Online)
VL  - Vol. 2
IS  - No. 1
SP  - 10
EP  - 12
ER  - 
TY  - JOUR
A1  - Vögele, Stefan
A1  - Rübbelke, Dirk
A1  - Govorukha, Kristina
A1  - Grajewski, Matthias
T1  - Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany
JF  - Climatic Change
Y1  - 2019
U6  - https://doi.org/10.1007/s10584-019-02366-0
SN  - 0165-0009
SP  - 1
EP  - 16
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Wagner, Holger
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of (bio-)chemical sensors on wafer level
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 835
EP  - 838
ER  - 
TY  - JOUR
A1  - Beck, Daniel
A1  - Buchleitner, Martin
A1  - Ferrein, Alexander
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
T1  - Mostly Harmless & AllemaniACs - mixed innovations
Y1  - 2014
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Arndt, Tobias
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Galla, Oskar
A1  - Köse, Hakan
A1  - Schiffer, Stefan
A1  - Tschesche, Matteo
T1  - Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers
T2  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments
N2  - This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.
KW  - Datasets
KW  - Neural networks
KW  - Anomaly detection
KW  - Quality control
KW  - Process optimization
Y1  - 2023
SN  - 9798400700699
U6  - https://doi.org/10.1145/3594806.3596558
N1  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments, Corfu, Greece, July 5 - 7, 2023
SP  - 535
EP  - 542
PB  - ACM
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Siqueira, José R. Jr.
A1  - Oliveira, Osvaldo N. Jr.
A1  - Moritz, Werner
A1  - Schöning, Michael Josef
T1  - Capacitive electrolyte-insulator-semiconductor structures functionalised with a polyelectrolyte/enzyme multilayer: New strategy for enhanced field-effect biosensing
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 884
EP  - 890
ER  - 
TY  - CHAP
A1  - Wagemann, Kurt
A1  - Tippkötter, Nils
T1  - Biorefineries: a short introduction
T2  - Biorefineries
N2  - The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.
KW  - Bioeconomy
KW  - Biorefinery definitions
KW  - Introduction
KW  - Process schemes
KW  - Renewable resources
Y1  - 2018
SN  - 978-3-319-97117-9
SN  - 978-3-319-97119-3
U6  - https://doi.org/10.1007/10_2017_4
N1  - (Advances in Biochemical Engineering/Biotechnology book series ; Vol. 166)
SP  - 1
EP  - 11
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Nix, Yvonne
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Implementation of the edge-based smoothed extended finite element method
T2  - Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
Y1  - 2012
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Schöning, Michael Josef
T1  - Field-effect devices for detecting cellular signals
JF  - Seminars in Cell & Developmental Biology. 20 (2009), H. 1
Y1  - 2009
SN  - 1096-3634
SP  - 41
EP  - 48
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - https://doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - JOUR
A1  - Scholz, A.
A1  - Ley, Wilfried
A1  - Dachwald, Bernd
A1  - Miau, J. J.
A1  - Juang, J. C.
T1  - Flight results of the COMPASS-1 picosatellite mission
JF  - Acta Astronautica. 67 (2010), H. 9-10
Y1  - 2010
SN  - 0094-5765
SP  - 1289
EP  - 1298
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Wulfhorst, Helene
A1  - Duwe, Anna-Maria
A1  - Merseburg, Johannes
A1  - Tippkötter, Nils
T1  - Compositional analysis of pretreated (beech) wood using differential scanning calorimetry and multivariate data analysis
JF  - Tetrahedron
N2  - The composition of plant biomass varies depending on the feedstock and pre-treatment conditions and influences its processing in biorefineries. In order to ensure optimal process conditions, the quantitative proportion of the main polymeric components of the pre-treated biomass has to be determined. Current standard procedures for biomass compositional analysis are complex, the measurements are afflicted with errors and therefore often not comparable. Hence, new powerful analytical methods are urgently required to characterize biomass. In this contribution, Differential Scanning Calorimetry (DSC) was applied in combination with multivariate data analysis (MVA) to detect the cellulose content of the plant biomass pretreated by Liquid Hot Water (LHW) and Organosolv processes under various conditions. Unlike conventional techniques, the developed analytic method enables the accurate quantification of monosaccharide content of the plant biomass without any previous sample preparation. It is easy to handle and avoids errors in sample preparation.
Y1  - 2016
U6  - https://doi.org/10.1016/j.tet.2016.04.029
VL  - 72
IS  - 46
SP  - 7329
EP  - 7334
PB  - Elsevier
CY  - Amsterdam
ER  -