TY  - JOUR
A1  - Schmidt, R.
A1  - Tonnesmann, A.
A1  - Förster, Arnold
A1  - Grimm, M.
A1  - Kordos, P.
A1  - Lüth, H.
T1  - Metamorphic InAlAs/InGaAs HEMT's on GaAs substrates using an InP buffer layer
JF  - 8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications : EDMO 2000 ; [13 - 14 November 2000, University of Glasgow] / organised by Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow Scotland. MTT/ED/AP/LEO Societies Joint Chapter, United Kingdom and Republic of Ireland Section. With technical co-sponsorship from IEEE Electron Device Society
Y1  - 2000
SN  - 0-7803-6550-X
N1  - EDMO <8, 2000, Glasgow> ; University <Glasgow> / Department of Electronics and Electrical Engineering ; IEEE catalog number 00TH8534
SP  - 95
EP  - 98
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Schmidt, Rolf
A1  - Hebel, Christoph
T1  - Makroskopische Verkehrssimulationsmodelle in der kommunalen Planungspraxis
JF  - Stadt Region Land (2009)
Y1  - 2009
SN  - 0344-9645
SP  - 63
EP  - 72
PB  - RWTH Aachen
CY  - Aachen
ER  - 
TY  - PAT
A1  - Schmidt, Sebastian
A1  - Jelinek, Nanni
A1  - Biselli, Manfred
T1  - Verfahren zur Durchführung von chemischen oder biologischen Reaktionen
T1  - Chemical or biological reactions on surface of particles, retained in container permeable to reaction fluid, especially for growing cells
Y1  - 1999
N1  - DE000019822050A1 18.11.1999
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schmidt, Thomas
A1  - Kasch, Susanne
A1  - Eichler, Fabian
A1  - Thurn, Laura
T1  - Process strategies on laser-based melting of glass powder
T2  - LiM 2021 proceedings
N2  - This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component’s material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.
KW  - 3D-printing
KW  - glass
KW  - additive manufactureing
KW  - laser based powder fusion
Y1  - 2021
N1  - LiM (Lasers in Manufacturing) 2021, June 21 - 24, 2021, online
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Boltes, Maik
A1  - Kraft, Bodo
A1  - Schreiber, Marc
T1  - Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers
T2  - 2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan
Y1  - 2017
N1  - International Conference on Indoor Positioning and Indoor Navigation <8, 2017, Sapporo, Japan>
SP  - 1
EP  - 4
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Schreiber, Marc
A1  - Zündorf, Albert
T1  - Continuously evaluated research projects in collaborative decoupled environments
T2  - 2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER&IP' 18
N2  - Often, research results from collaboration projects are not transferred into productive environments even though approaches are proven to work in demonstration prototypes. These demonstration prototypes are usually too fragile and error-prone to be transferred
easily into productive environments. A lot of additional work is required.
Inspired by the idea of an incremental delivery process, we introduce an architecture pattern, which combines the approach of Metrics Driven Research Collaboration with microservices for the ease of integration. It enables keeping track of project goals over the course of the collaboration while every party may focus on their expert skills: researchers may focus on complex algorithms,
practitioners may focus on their business goals.
Through the simplified integration (intermediate) research results can be introduced into a productive environment which enables
getting an early user feedback and allows for the early evaluation of different approaches. The practitioners’ business model benefits throughout the full project duration.
Y1  - 2018
SP  - 1
EP  - 9
PB  - ACM
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Siebigteroth, Ines
A1  - Zündorf, Albert
T1  - Schema Matching with Frequent Changes on Semi-Structured Input Files: A Machine Learning Approach on Biological Product Data
T2  - Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS
Y1  - 2019
SN  - 978-989-758-372-8
U6  - https://doi.org/10.5220/0007723602080215
SP  - 208
EP  - 215
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1
N2  - The integration of product data from heterogeneous sources and manufacturers into a single catalog is often still a laborious, manual task. Especially small- and medium-sized enterprises face the challenge of timely integrating the data their business relies on to have an up-to-date product catalog, due to format specifications, low quality of data and the requirement of expert knowledge. Additionally, modern approaches to simplify catalog integration demand experience in machine learning, word vectorization, or semantic similarity that such enterprises do not have. Furthermore, most approaches struggle with low-quality data. We propose Attribute Label Ranking (ALR), an easy to understand and simple to adapt learning approach. ALR leverages a model trained on real-world integration data to identify the best possible schema mapping of previously unknown, proprietary, tabular format into a standardized catalog schema. Our approach predicts multiple labels for every attribute of an inpu t column. The whole column is taken into consideration to rank among these labels. We evaluate ALR regarding the correctness of predictions and compare the results on real-world data to state-of-the-art approaches. Additionally, we report findings during experiments and limitations of our approach.
Y1  - 2020
SN  - 978-989-758-440-4
U6  - https://doi.org/10.5220/0009831000900101
N1  - 9th International Conference on Data Science, Technologies and Applications (DATA 2020), 7 - 9 July 2020, online
SP  - 90
EP  - 101
PB  - SciTePress
CY  - Setúbal, Portugal
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - https://doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmiegel, A.
A1  - Koch, K.
A1  - Dittmer, M.
A1  - Braun, M.
A1  - Landau, M.
A1  - Dick, C.
A1  - Bragard, Michael
A1  - Bücenbender, K.
A1  - De Doncker, R.W.
T1  - Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom
T2  - Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. März 2010, Kloster Banz, Bad Staffelstein. - (Wissen für Profis)
Y1  - 2010
SN  - 978-3-941785-23-6
SP  - 354
EP  - 359
PB  - OTTI, Ostbayerisches Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - JOUR
A1  - Schmitt, G.
A1  - Faßbender, F.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
A1  - Buss, G.
A1  - Kranzmann, A.
A1  - Gramberg, U.
T1  - Korrosionsschutzwirkung von Passivierungsschichten am Beispiel eines Mikroelektrodenarrays
JF  - Werkstoffe für die Energietechnik / Symposium 3
Y1  - 1999
SN  - 3-527-29940-8
N1  - Serie Werkstoffwoche '98 ; 3
SP  - 345
EP  - 350
PB  - Wiley-VCH
CY  - Weinheim [u.a.]
ER  - 
TY  - JOUR
A1  - Schmitt, G.
A1  - Faßbender, F.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
A1  - Schultze, J. W.
A1  - Buß, G.
T1  - Passivation and corrosion of microelectrode arrays
JF  - Materials and Corrosion. 51 (2000), H. 1
Y1  - 2000
SN  - 0947-5117
SP  - 20
EP  - 25
ER  - 
TY  - JOUR
A1  - Schmitt, G.
A1  - Schultze, J.-W.
A1  - Faßbender, F.
A1  - Buß, G.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Passivation and corrosion of microelectrode arrays
JF  - Electrochimica Acta. 44 (1999), H. 21-22
Y1  - 1999
SN  - 0013-4686
SP  - 3865
EP  - 3883
ER  - 
TY  - JOUR
A1  - Schmitt, G.
A1  - Werner, C.
A1  - Schöning, Michael Josef
T1  - Microelectrochemical efficiency evaluation of inhibitors for CO2 corrosion of carbon steel under high shear stress gradients
JF  - Corrosion 2002. Conference Proceedings. NACExpo, 57th Annual Conference and Exhibition, Denver, US, Apr 7-11, 2002
Y1  - 2002
N1  - Paper 02280
SP  - 1
EP  - 11
PB  - NACE International
CY  - Houston, Texas
ER  - 
TY  - JOUR
A1  - Schmitt, Robert
A1  - Scholl, Ingrid
A1  - Cai, Yu
A1  - Xia, Ji
A1  - Dziwoki, Paul
A1  - Harding, Martin
A1  - Pavim, Alberto
T1  - Machine Vision System for Inline Inspection in Carbide Insert Production
JF  - Bildverarbeitung  für die Medizin 2010 : Algorithmen, Systeme, Anwendungen ; Proceedings des Workshops vom 14. bis 16. März in Aachen / Thomas M. Deserno ... (Hrsg.)
Y1  - 2010
SN  - 978-3-642-11967-5
N1  - Proceedings of the 36th International MATADOR Conference ; Workshop Bildverarbeitung  für die Medizin <2010, Aachen>
SP  - 339
EP  - 342
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schmitt, Rolf W.
T1  - Werkstoffe - Oberflächen - Schmierstoffe - Tribologie-Fachtagung 2004 in Göttingen
JF  - Erdöl Erdgas Kohle. 121 (2005), H. 1
Y1  - 2005
SN  - 0179-3187
SP  - 39
EP  - 40
ER  - 
TY  - JOUR
A1  - Schmitt, Rolf W.
T1  - Innovationen bei Schmierstoffen und tribologischen Systemen
JF  - Stahl und Eisen. 125 (2005), H. 3
Y1  - 2005
SN  - 0340-4803
SP  - 51
EP  - 53
ER  - 
TY  - JOUR
A1  - Schmitt, Rolf W.
A1  - Blank, K.
A1  - Schoenbrunn, G.
T1  - Experimentelle Spannungsanalyse zum Doppelringverfahren
JF  - Sprechsaal : internat. ceramics & glass magazine. 116 (1983), H. 5
Y1  - 1983
SN  - 0341-0439
SP  - 397
EP  - 405
ER  - 
TY  - CHAP
A1  - Schmitt, T.
A1  - Butenweg, Christoph
T1  - Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme – Parameterstudie
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 199
EP  - 206
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schmitz, Annika
A1  - Apandi, Shah Eiman Amzar Shah
A1  - Spillner, Jan
A1  - Hima, Flutura
A1  - Behbahani, Mehdi
ED  - Digel, Ilya
ED  - Staat, Manfred
ED  - Trzewik, Jürgen
ED  - Sielemann, Stefanie
ED  - Erni, Daniel
ED  - Zylka, Waldemar
T1  - Effect of different cannula positions in the pulmonary artery on blood flow and gas exchange using computational fluid dynamics analysis
T2  - YRA MedTech Symposium (2024)
N2  - Pulmonary arterial cannulation is a common and effective method for percutaneous mechanical circulatory support for concurrent right heart and respiratory failure [1]. However, limited data exists to what effect the positioning of the cannula has on the oxygen perfusion throughout the pulmonary artery (PA). This study aims to evaluate, using computational fluid dynamics (CFD), the effect of different cannula positions in the PA with respect to the oxygenation of the different branching vessels in order for an optimal cannula position to be determined. The four chosen different positions (see Fig. 1) of the cannulas are, in the lower part of the main pulmonary artery (MPA), in the MPA at the junction between the right pulmonary artery (RPA) and the left pulmonary artery (LPA), in the RPA at the first branch of the RPA and in the LPA at the first branch of the LPA.
Y1  - 2024
SN  - 978-3-940402-65-3
U6  - https://doi.org/10.17185/duepublico/81475
N1  - 4th YRA MedTech Symposium, February 1, 2024. FH Aachen, Campus Jülich
SP  - 29
EP  - 30
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Mechatronik im Automobil II : aktuelle Trends in der Systementwicklung für Automobile / Günter Schmitz (Hrsg.)
Y1  - 2003
SN  - 3-8169-2139-6
PB  - Expert-Verl
CY  - Renningen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Demel, Werner ... (Hrsg.)
Y1  - 1999
N1  - Tagunsband zum 3. Krefelder Workshop TransMechatronik, 24. August 1999, Fachhochschule Niederrhein
PB  - Heinz-Nixdorf-Institut
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
T1  - Mechatronic Systems Simulation as an obligatory module for Mechatronic Master Students
JF  - Mechatronics & Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)
Y1  - 2004
SN  - 3-938153-50-X
SP  - 1278
PB  - Eysoldt
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Mechatronik im Automobil I: aktuelle Trends in der Systementwicklung für Automobile / Günter Schmitz (Hrsg.)
Y1  - 2000
SN  - 3-8169-1839-5
PB  - Expert-Verl.
CY  - Renningen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Nichtreziproke optische Bauelemente mit künstlich anisotropen Filmwellenleitern
Y1  - 1985
N1  - Aachen, Techn. Hochsch., Diss., 1985
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektronik im Kraftfahrzeug : Innovationen bei System und Komponenten ; mit 7 Tabellen / Hrsg.: Schmitz, Günter
Y1  - 2012
SN  - 978-3-8169-3110-2
N1  - Haus der Technik ; Bd. 123
PB  - expert-Verl.
CY  - Renningen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektrotechnik : Grundlagen der Elektrotechnik für Ingenieur-Studenten
Y1  - 2011
SN  - 978-87-7681-786-2
N1  - nach Registrierung frei zugänglich
PB  - Ventus Publ.
CY  - Frederiksberg
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektronik : Grundlagen der Elektronik für Ingenieurstudenten
Y1  - 2011
SN  - 978-87-7681-832-6
N1  - nach Registrierung frei zugänglich
PB  - Ventus Publ.
CY  - Frederiksberg
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektrotechnik für Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Hauptbd.: Gleichspannungstechnik, Wechselspannungstechnik, Elektrische Maschinen
Y1  - 2013
SN  - 978-1-481830-60-7
PB  - Schmitz
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektrotechnik für Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Aufgabensammlung, [Übungs- und Klausuraufgaben]
Y1  - 2013
SN  - 978-1-482721-47-8
PB  - Schmitz
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Altherr, M.
A1  - Hofmann, O.
A1  - Pischinger, M. (u.a.)
T1  - Anwendung moderner Simulationstools für die Entwicklung eines elektromagnetischen Ventilaktuators
JF  - TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Aachener Workshop TransMechatronik 26. Mai 1998, Technologiezentrum am Europaplatz
Y1  - 1998
SN  - 3-931466-37-X
SP  - 55
EP  - 74
PB  - Heinz-Nixdorf-Inst, Univ.-GH Paderborn
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Bartz, R.
A1  - Böhnke, P.
T1  - Neue Methoden zur Erkennung des ottomotorischen Klopfens
JF  - Motortechnische Zeitschrift : MTZ. 53 (1992), H. 6
Y1  - 1992
SN  - 0024-8525
SP  - 286
EP  - 293
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Bartz, R.
A1  - Hansen, W.
T1  - Flexibles elektronisches Verbrennungsmotoren-Indiziersystem (FEVIS)
JF  - Vorträge und Kurzreferate : 13. und 14. November 1990, Congress Centrum, Magdeburg / Technische Universität "Otto von Guericke" Magdeburg, Fakultät für Thermischen Maschinenbau, Institut für Maschinenmeßtechnik, Kolbenmaschinen und Instandhaltung
Y1  - 1991
N1  - ergänzter Nachdr., als Ms. gedr.
SP  - 485
EP  - 491
CY  - Magdeburg
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Bartz, R.
A1  - Hilger, U.
A1  - Siedentop, M.
T1  - Intelligent Alcohol Fuel Sensor
Y1  - 1990
N1  - SAE- Paper-No.: 900231, SAE International Congress and Exposition, Detroit, Feb. 26 - March 2, 1990
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Damann, H.
A1  - Schmit, H. J.
T1  - Design and Analysis of a Waveguide Isolator with a Form-Birefringent Top Layer
JF  - ECOC '84 : Conference proceedings ; 10th European Conference on Optical Communication, September 3 - 6, 1984 Liederhalle Stuttgart, Federal Republic of Germany / Organized by Nachrichtentechn. Ges. im VDE (NTG).
Y1  - 1984
SN  - 3-8007-1383-7
SP  - 42
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Oligschläger, U.
A1  - Eifler, G.
A1  - Lechner, H.
T1  - Automated System for Optimized Calibration of Engine Management Systems
Y1  - 1994
N1  - SAE International Congress and Exposition, Detroit, Feb. 28 - March 3 ; SAE- Paper-No.: 940151 ; <a href=
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Pischinger, M.
T1  - Mechatronische Simulation eines EMV- Aktuators
JF  - TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. Jürgen Gausemeier]
Y1  - 1997
SN  - 3-931466-22-1
N1  - HNI-Verlagsschriftenreihe ; 23
SP  - 69
EP  - 83
PB  - Heinz-Nixdorf-Inst., Univ.-GH Paderborn
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Roetert, J.
A1  - Pischinger, M.
T1  - A Fast Intelligent VMEbus System for Combustion Analysis in Engines
JF  - 19th [nineteenth] International Symposium on Automotive Technology & [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.
Y1  - 1988
SN  - 0947719229
SP  - 381
EP  - 391
PB  - Automotive Automation Ltd
CY  - Croydon
ER  - 
TY  - PAT
A1  - Schmitz, Günter
A1  - Schebitz, Michael
A1  - Esch, Thomas
T1  - Aus der Ruhelage selbstanziehender elektromagnetischer Aktuator
N2  - Elektromagnetischer Aktuator zur Betätigung eines Stellgliedes (2), mit wenigstens einem Elektromagneten (4) und einem mit dem Stellglied (2) verbundenen Anker (3), der gegen die Kraft einer Rückstellfeder (6) aus seiner Ruhelage in Richtung auf den Elektromagneten (4) bewegbar ist, mit einer Rückstellfeder (6), die eine nicht lineare, bezogen auf die Ruhelage des Ankers (3) progressiv ansteigende Kennlinie aufweist.
Y1  - 1997
N1  - Patent DE000019529152B4 2005.12.29
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Schmitt, H. J.
T1  - Anisotrope Filmwellenleiter für nichtreziproke optische Bauelemente
JF  - URSI: Kleinheubacher Tagung am 3.10.83 / Hrsg.: Deutsche Telekom AG
Y1  - 1984
SN  - 0343-5725
SP  - 51
CY  - Darmstadt
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Schmitt, H.J.
A1  - Dammann, H.
T1  - Weakly Guiding Semileaky Isolator with a Form-Birefringent Top Layer
JF  - Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)
Y1  - 1985
SP  - 260
PB  - Optical Society of America
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Spicher, U.
A1  - Kollmeier, H.P.
T1  - Application of a New Optical-Fiber Technique for Flame Propagation Diagnostics in IC Engines
Y1  - 1988
N1  - SAE- Paper-No.: 881637, 1988 SAE International Fuels and Lubricants Meeting and Exposition, Portland, October 10-13, 1988
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Vom Hemdt, A.
A1  - Breitschuh, S.
A1  - Graber, S.
T1  - Virtuelle Praktika für die Ingenieurausbildung
JF  - NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Eberspächer
Y1  - 2002
SN  - 3-8007-2723-4
SP  - 69
EP  - 74
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - THES
A1  - Schmitz, Jennifer
T1  - Inklusives Design: Multisensorisches Branding für sehbehinderte, blinde und sehende Menschen
N2  - Multisensorisches Branding bezeichnet die Gestaltung für mindestens zwei Sinne.
Diese Bachelorarbeit beinhaltet daher ein Konzept, um sehbehinderten Menschen und Blinden das Branding einer Marke im Bereich der Bekleidungsindustrie zugänglich zu machen.
Durch die gezielte Kombination von Haptik und Optik ist im Rahmen dieser Arbeit eine Bekleidungsmarke entstanden, deren Textilien jegliche Informationen für sehbehinderte und blinde Menschen enthalten, ohne dabei auf eine ansprechende Optik für Sehende zu verzichten. Vor allem durch neu entwickelte Open Source Symbole, die fühlbar sind, und einen Barcode wird Betroffenen in Zukunft der Kauf von Bekleidung sowie der Waschvorgang erleichtert.
KW  - Inklusion
KW  - Barrierefrei
KW  - Textilbranche
KW  - Waschetiketten
KW  - Haptik
Y1  - 2021
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Schmitz, M.
A1  - Hirsch, E.
A1  - Bongaerts, Johannes
A1  - Takors, Ralf
T1  - Pulse experiments as a prerequisite for the quantification of in vivo enzyme kinetics in aromatic amino acid pathway of Eschericia coli
JF  - Biotechnology progress
Y1  - 2002
SN  - 1520-6033 (E-Journal); 8756-7938 (Print)
VL  - Vol. 18
IS  - Iss. 5
SP  - 935
EP  - 941
ER  - 
TY  - CHAP
A1  - Schmitz, Manfred
A1  - Dietze, Christian
A1  - Czarnecki, Christian
ED  - Urbach, Nils
ED  - Röglinger, Maximilian
T1  - Enabling digital transformation through robotic process automation at Deutsche Telekom
T2  - Enabling digital transformation through robotic process automation at Deutsche Telekom
N2  - Due to the high number of customer contacts, fault clearances, installations, and product provisioning per year, the automation level of operational processes has a significant impact on financial results, quality, and customer experience. Therefore, the telecommunications operator Deutsche Telekom (DT) has defined a digital strategy with the objectives of zero complexity and zero complaint, one touch, agility in service, and disruptive thinking. In this context, Robotic Process Automation (RPA) was identified as an enabling technology to formulate and realize DT’s digital strategy through automation of rule-based, routine, and predictable tasks in combination with structured and stable data.
Y1  - 2019
SN  - 978-3-319-95272-7
U6  - https://doi.org/10.1007/978-3-319-95273-4_2
SP  - 15
EP  - 33
PB  - Springer
CY  - Cham
ER  - 
TY  - THES
A1  - Schmitz, Marvin
T1  - Eishockey Uni-Cup der RWTH Aachen : Produktion einer Sportübertragung
N2  - Der Uni-Cup ist ein Amateur Eishockey Turnier der RWTH Aachen. Es treten Studierende und Professor:innen gegeneinander an. Ausgetragen wurde das Turnier vor etwa 2.500 Zuschauern in der 100,5 Arena am Tivoli. Um das Event einer breiteren Masse zugänglich zu machen, wurde dort im Rahmen der Bachelorarbeit erstmals eine Live Übertragung produziert. Das Ziel dabei war es, eine möglichst professionelle und unterhaltsame Show zu kreieren.
KW  - Livestream
KW  - Eishockey
KW  - Sport
KW  - RWTH Aachen
KW  - Regie
Y1  - 2023
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - THES
A1  - Schmitz, Moritz
T1  - Kochen inklusiver gestalten. : Bedürfnisorientiertes Küchensystem für
Menschen mit Sehbeeinträchtigungen
N2  - Es ist nachweislich gesünder und häufig günstiger selber zu kochen und es gibt dem Menschen mehr Kontrolle über seine Ernährung.
Bis dato wird keine Küchenmaschine angeboten, die von blinden Menschen bedient werden kann, obwohl gerade solche Produkte den Alltag dieser Gruppe enorm vereinfachen könnten. „Clu.“ ist ein modulares Küchensystem, welches von einer App unterstützt wird. Die Basis besteht aus einer Küchenmaschine, die über Sprache und haptische Bedienelemente gesteuert wird. Durch die Anwendung des Mehr-Sinne-Prinzip, der Simplifizierung von Funktionen und der Einbindung von Smart Home Komponenten werden nicht nur Menschen mit Sehbeeinträchtigungen profitieren. Beispielsweise funktioniert das Kochen nach Rezept nun ähnlich wie das Hören eines Hörbuches und die User können sich dem in ihrem favorisierten Tempo annehmen. „Clu.“ ist ein Ansatz für eine neue Kategorie von Produkten, die zeigen, wie attraktiv inklusivere Produktlösungen aussehen können.
KW  - Industrie Design
KW  - Concept Design
KW  - Inclusive Design
KW  - Visual impairment
KW  - Food processor
Y1  - 2022
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - THES
A1  - Schmitz, Philipp
T1  - Empirical analyses of the trading behavior of individual investors in the warrant market
Y1  - 2007
N1  - Mannheim, Univ., Diss., 2007
ER  -