TY - BOOK A1 - Baltzer, Wolfgang T1 - Richtlinien für die Ausstattung und den Betrieb von Straßentunneln : RABT / Forschungsgesellschaft für Straßen- und Verkehrswesen, Arbeitsgruppe Verkehrsführung und Verkehrssicherheit. [Arbeitsgruppe Verkehrsführung und Verkehrssicherheit, Arbeitsausschuss Ausstattung und Betrieb von Straßentunneln. Leiter: Wolfgang Baltzer]. Ausg. 2003 Y1 - 2003 N1 - Forschungsgesellschaft für Straßen- und Verkehrswesen, Arbeitsausschuss Ausstattung und Betrieb von Straßentunneln. FGSV ; 339 PB - FGSV-Verl. CY - Köln ER - TY - THES A1 - Balthazar, Kim T1 - SWASH : endlich bequem waschen N2 - Der S W A S H ist eine innovative Produktlösung zur Reduzierung von Pain Points beim alltäglichen Reinigen von Textilien. Schmutzige Kleidungsstücke müssen in Zukunft weniger mit Wasser und Waschmitteln in Berührung kommen. Dadurch minimiert sich der Ressourcenverbrauch, die Langlebigkeit der Kleidung wird erhöht und die umfangreiche Aufgabe des Waschens wird bequemer, ohne Einbußen in Sauberkeit und Hygiene haben zu müssen. Der S W A S H wird durch KI gesteuert und gewährleistet so eine kinderleichte Nutzbarkeit. Da er mit Wassertanks betrieben wird, benötigt man keinen Wasseranschluss und kann die Platzierung frei wählen. Durch den modularen und minimalistischen Aufbau kann er auf die Ästhetik des individuellen Wohnraums angepasst werden. Der Refresher mit Waschfunktion kann als freistehendes Möbelstück erworben oder in einen vorhandenen Kleiderschrank integriert werden. KW - Waschmaschine KW - nachhaltig KW - Produktdesign KW - Skandinavien KW - modular Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Ballmann, Josef A1 - Dafnis, Athanasios A1 - Braun, Carsten A1 - Korsch, Helge A1 - Reimerdes, Hans-Günther A1 - Braun, Carsten A1 - Ballmann, Josef T1 - The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW) T2 - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences Y1 - 2006 SN - 0-9533991-7-6 SP - Paper No. 2006-5.11.2 PB - Optimage CY - Edinburgh ER - TY - CHAP A1 - Ballmann, Josef A1 - Boucke, Alexander A1 - Braun, Carsten T1 - Aeroelastic sensitivity in the transonic regime T2 - Symposium Transsonicum IV : proceedings of the IUTAM symposium held in Göttingen, Germany, 2 - 6 September 2002 / ed. by Helmut Sobieczky. Fluid mechanics and its applications. Vol. 73 Y1 - 2003 SN - 978-94-010-3998-7 SP - 225 EP - 236 PB - Kluwer Academic CY - Dordrecht ER - TY - CHAP A1 - Ballmann, J. A1 - Raatschen, Hans-Jürgen A1 - Staat, Manfred T1 - High stress intensities in focussing zones of waves N2 - The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate. KW - Technische Mechanik KW - Wellen KW - mechanical waves Y1 - 1985 U6 - https://doi.org/10.1016/B978-0-444-42520-1.50015-3 ER - TY - JOUR A1 - Ball, Christopher Stephen A1 - Vögele, Stefan A1 - Grajewski, Matthias A1 - Kuckshinrichs, Wilhelm T1 - E-mobility from a multi-actor point of view: Uncertainties and their impacts JF - Technological Forecasting and Social Change Y1 - 2021 SN - 0040-1625 U6 - https://doi.org/10.1016/j.techfore.2021.120925 VL - 170 IS - Art. 120925 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Balewski, J. A1 - Brauksiepe, S. A1 - Hardt, Arno T1 - Threshold measurements at the internal experimental facility COSY-11 / J. Balewski [u.a.] JF - Nuclear physics A. Vol. 626, iss. 1-2 Y1 - 1997 SN - 1873-1554 (E-Journal) ; 0375-9474 (Print) SP - 85 EP - 92 ER - TY - CHAP A1 - Balaskas, Georgios A1 - Hoffmeister, Benno A1 - Butenweg, Christoph A1 - Pilz, Marco A1 - Bauer, Anna ED - Papadrakakis, Manolis ED - Fragiadakis, Michalis T1 - Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models T2 - Proceedings of COMPDYN 2021 N2 - This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures’health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration. KW - early warning and response system KW - interconnected sensor systems KW - seismic structural damage detection via SHM KW - integration SHM in BIM Y1 - 2021 SN - 978-618-85072-5-8 U6 - https://doi.org/10.7712/120121.8539.18855 SN - 2623-3347 N1 - COMPDYN 2021, 28-30 June 2021, Streamed from Athens, Greece, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering SP - 987 EP - 998 PB - National Technical University of Athens CY - Athen ER - TY - JOUR A1 - Balakrishnan, Karthikeyan A1 - Andrei-Selmer, Luminita-Cornelia A1 - Selmer, Thorsten A1 - Bacher, Michael A1 - Dodel, Richard T1 - Comparison of Intravenous Immunoglobulins for Naturally Occurring Autoantibodies against Amyloid-β JF - Journal of Alzheimer's Disease Y1 - 2010 SN - 1387-2877 VL - 20 IS - 1 SP - 135 EP - 143 ER - TY - JOUR A1 - Balakirski, Galina A1 - Kotliar, Konstantin A1 - Pauly, Karolin J. A1 - Krings, Laura K. A1 - Rübben, Albert A1 - Baron, Jens M. A1 - Schmitt, Laurenz T1 - Surgical Site Infections After Dermatologic Surgery in Immunocompromised Patients: A Single-Center Experience JF - Dermatologic Surgery N2 - BACKGROUND Immunosuppression is often considered as an indication for antibiotic prophylaxis to prevent surgical site infections (SSI) while performing skin surgery. However, the data on the risk of developing SSI after dermatologic surgery in immunosuppressed patients are limited. PATIENTS AND METHODS All patients of the Department of Dermatology and Allergology at the University Hospital of RWTH Aachen in Aachen, Germany, who underwent hospitalization for a dermatologic surgery between June 2016 and January 2017 (6 months), were followed up after surgery until completion of the wound healing process. The follow-up addressed the occurrence of SSI and the need for systemic antibiotics after the operative procedure. Immunocompromised patients were compared with immunocompetent patients. The investigation was conducted as a retrospective analysis of patient records. RESULTS The authors performed 284 dermatologic surgeries in 177 patients. Nineteen percent (54/284) of the skin surgery was performed on immunocompromised patients. The most common indications for surgical treatment were nonmelanoma skin cancer and malignant melanomas. Surgical site infections occurred in 6.7% (19/284) of the cases. In 95% (18/19), systemic antibiotic treatment was needed. Twenty-one percent of all SSI (4/19) were seen in immunosuppressed patients. CONCLUSION According to the authors' data, immunosuppression does not represent a significant risk factor for SSI after dermatologic surgery. However, larger prospective studies are needed to make specific recommendations on the use of antibiotic prophylaxis while performing skin surgery in these patients. The available data on complications after dermatologic surgery have improved over the past years. Particularly, additional risk factors have been identified for surgical site infections (SSI). Purulent surgical sites, older age, involvement of head, neck, and acral regions, and also the involvement of less experienced surgeons have been reported to increase the risk of the SSI after dermatologic surgeries.1 In general, the incidence of SSI after skin surgery is considered to be low.1,2 However, antibiotics in dermatologic surgeries, especially in the perioperative setting, seem to be overused,3,4 particularly regarding developing antibiotic resistances and side effects. Immunosuppression has been recommended to be taken into consideration as an additional indication for antibiotic prophylaxis to prevent SSI after skin surgery in special cases.5,6 However, these recommendations do not specify the exact dermatologic surgeries, and were not specifically developed for dermatologic surgery patients and treatments, but adopted from other surgical fields.6 According to the survey conducted on American College of Mohs Surgery members in 2012, 13% to 29% of the surgeons administered antibiotic prophylaxis to immunocompromised patients to prevent SSI while performing dermatologic surgery on noninfected skin,3 although this was not recommended by Journal of the American Academy of Dermatology Advisory Statement. Indeed, the data on the risk of developing SSI after dermatologic surgery in immunosuppressed patients are limited. However, it is possible that due to the insufficient evidence on the risk of SSI occurrence in this patient group, dermatologic surgeons tend to overuse perioperative antibiotic prophylaxis. To make specific recommendations on the use of antibiotic prophylaxis in immunosuppressed patients in the field of skin surgery, more information about the incidence of SSI after dermatologic surgery in these patients is needed. The aim of this study was to fill this data gap by investigating whether there is an increased risk of SSI after skin surgery in immunocompromised patients compared with immunocompetent patients. Y1 - 2018 U6 - https://doi.org/10.1097/DSS.0000000000001615 IS - 44 (12) SP - 1525 EP - 1536 PB - Wolters Kluwer ER - TY - THES A1 - Baierlein, Ellen T1 - Konzerthaus Berlin : Entwicklung eines Erscheinungsbildes für das Konzerthaus Berlin N2 - Das Konzerthaus Berlin ist einer der schönsten Orte Berlins für klassische Musik. Dabei steht das Haus auf der Schwelle zwischen langer Tradition und Moderne. Die Qualität an Musik, die dort gespielt wird, soll dabei für alle zugänglich sein. Dies machen die unterschiedlichsten Konzerte möglich. Um diesen modernen Anspruch auch nach außen zu kommunizieren, wurde ein neues Gestaltungskonzept für das Konzerthaus Berlin entwickelt. Im Fokus des neu entwickelten Corporate Designs steht der Rhythmus Gedanke, welcher sich im Headline Prinzip zeigt sowie medienübergreifend in der Layoutgestaltung durch Groß/Klein Kontraste fortsetzt. Das Erscheinungsbild funktioniert dabei sowohl animiert als auch statisch. Musik wird dadurch visuell erfahrbar gemacht und bildet den modernen Fokuspunkt in der Gestaltung. KW - Corporate Design KW - Konzerthaus KW - Klassische Musik KW - Musik KW - Berlin Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Baier, Reinhold A1 - Hebel, Christoph A1 - Peter, Christof A1 - Schäfer, Karl Heinz T1 - Gesamtwirkungsanalyse zur Parkraumbewirtschaftung Y1 - 2000 N1 - Berichte der Bundesanstalt für Strassenwesen : V, Verkehrstechnik ;75 ; Bericht zum Forschungs- und Entwicklungsvorhaben 77406/1996 des Bundesministeriums für Verkehr, Bau- und Wohnungswesen PB - Wirtschaftsverlag NW, Verl. für neue Wiss. CY - Bremerhaven ER - TY - JOUR A1 - Baier, Reinhold A1 - Hebel, Christoph T1 - Parkraumbewirtschaftung und Modal-Split - die relativierte Stellschraube JF - Strassenverkehrstechnik . 45 (2001), H. 4 Y1 - 2001 SN - 0039-2219 N1 - Printausgabe in der Bereichsbibliothek Bayernallee unter der Signatur 13 Z 208-2001 SP - 165 EP - 167 ER - TY - CHAP A1 - Baier, Ralph A1 - Brauner, Philipp A1 - Brillowski, Florian A1 - Dammers, Hannah A1 - Liehner, Luca A1 - Pütz, Sebastian A1 - Schneider, Sebastian A1 - Schollemann, Alexander A1 - Steuer-Dankert, Linda A1 - Vervier, Luisa A1 - Gries, Thomas A1 - Leicht-Scholten, Carmen A1 - Mertens, Alexander A1 - Nagel, Saskia K. A1 - Schuh, Günther A1 - Ziefle, Martina A1 - Nitsch, Verena ED - Brecher, Christian ED - Schuh, Günther ED - van der Alst, Wil ED - Jarke, Matthias ED - Piller, Frank T. ED - Padberg, Melanie T1 - Human-centered work design for the internet of production T2 - Internet of production - fundamentals, applications and proceedings N2 - Like all preceding transformations of the manufacturing industry, the large-scale usage of production data will reshape the role of humans within the sociotechnical production ecosystem. To ensure that this transformation creates work systems in which employees are empowered, productive, healthy, and motivated, the transformation must be guided by principles of and research on human-centered work design. Specifically, measures must be taken at all levels of work design, ranging from (1) the work tasks to (2) the working conditions to (3) the organizational level and (4) the supra-organizational level. We present selected research across all four levels that showcase the opportunities and requirements that surface when striving for human-centered work design for the Internet of Production (IoP). (1) On the work task level, we illustrate the user-centered design of human-robot collaboration (HRC) and process planning in the composite industry as well as user-centered design factors for cognitive assistance systems. (2) On the working conditions level, we present a newly developed framework for the classification of HRC workplaces. (3) Moving to the organizational level, we show how corporate data can be used to facilitate best practice sharing in production networks, and we discuss the implications of the IoP for new leadership models. Finally, (4) on the supra-organizational level, we examine overarching ethical dimensions, investigating, e.g., how the new work contexts affect our understanding of responsibility and normative values such as autonomy and privacy. Overall, these interdisciplinary research perspectives highlight the importance and necessary scope of considering the human factor in the IoP. KW - Responsibility KW - Privacy KW - Digital leadership KW - Best practice sharing KW - Cognitive assistance system KW - Human-robot collaboration KW - Human-centered work design Y1 - 2023 SN - 978-3-030-98062-7 U6 - https://doi.org/10.1007/978-3-030-98062-7_19-1 N1 - Part of the book series: Interdisciplinary Excellence Accelerator Series (IDEAS) SP - 1 EP - 23 PB - Springer CY - Cham ER - TY - JOUR A1 - Baier, C. A1 - Mottaghy, Darius A1 - Ziegler, M. A1 - Rath, V. T1 - Numerische Simulation des Gefrierprozesses bei der Baugrundvereisung im durchströmten Untergrund JF - Bauingenieur Y1 - 2008 SN - 0005-6650 VL - 83 IS - 2 SP - 49 EP - 60 ER - TY - CHAP A1 - Bagheri, Mohsen A1 - Schleupen, Josef A1 - Dahmann, Peter A1 - Kallweit, Stephan T1 - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines T2 - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015 Y1 - 2015 SP - 1 EP - 6 ER - TY - CHAP A1 - Bagheri, Mohsen A1 - Schleupen, Josef A1 - Dahmann, Peter A1 - Kallweit, Stephan T1 - Kletternde Wartungsplattform für die wetterunabhängige Instandhaltung von Rotorblättern an Windenergieanlagen - SMART T2 - AKIDA 2016 Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen N2 - In Deutschland liegt der Anteil der Windkraft an der Gesamtstromerzeugung bei 13,3% mit mehr als 25.000 installierten Windenergieanlagen (WEA). Weltweit erfährt die Windbranche ein rasantes Wachstum. Indien und China berichten eine jährliche Wachstumsrate an Neuinstallationen von 45%. Die Technologie zur Erzeugung elektrischer Energie aus Windkraft ist noch vergleichsweise jung. Durch die weltweit steigende Anzahl an Windenergieanlagen wächst zunehmend der Bedarf an innovativen Wartungslösungen. Komponenten wie Generator oder Getriebe sind inzwischen weitestgehend ausgereift. Der Fokus richtet sich zunehmend auf die wesentliche Kernkomponente - die Rotorblätter. Industriekletterer inspizieren die Rotorblätter oder Türme i.d.R. in einem zwei Jahres Rhythmus. Sie werden zunehmend durch Seilarbeitsbühnen unterstützt. Für größere Reparaturen kommen Kräne zum Einsatz, mit denen das Rotorblatt für die Instandhaltung demontiert wird. Die Standardinspektion besteht aus Sicht- und Klopfprüfung der Rotorblattoberfläche und ist nur bei sehr ruhiger Wetterlage durchführbar. Seit September 2014 wird das Forschungsprojekt SMART (Scanning, Monitoring, Analysis, Repair and Transportation), Entwicklung einer Wartungsplattform für WEA, vom BMWi gefördert. Das Konsortium besteht aus zwei Firmen und der Fachhochschule Aachen. Die SMART-Anlage klettert reibschlüssig am Turm der WEA mittels speziellen Kettenfahrwerken (Abbildung) auf- und abwärts. Ein ringförmiges Spannsystems, basierend auf dem Konzept der „Nürnberger“-Schere, erzeugt die erforderliche Anpresskraft für den Kletterprozess. Wettergeschützte Arbeitskabinen ermöglichen die ganzjährige Instandhaltung von Rotorblättern und ebenso Türmen. Dadurch können Wartungsarbeiten auf 24 Stunden am Tag ausgeweitet werden. Der kombinierte Einsatz (Sensorfusion) bildgebender Messtechnik wie Thermografie, Ultraschall, und Terahertz in der Arbeitskabine kann die Dokumentation, Effizienz und Qualität der Instandhaltungsarbeiten erheblich verbessern. Langfristiges Ziel von SMART ist ein Condition Monitoring für Rotorblätter und Türme auf Basis digitalisierter dreidimensionaler Volumenscans. Der kooperative Einsatz mit UAVs erweitert die Instandhaltungsstrategie. UAVs ermöglichen die schnelle, kostengünstige globale optische Inspektion von Rotorblattoberflächen zur Detektion potentieller Fehlstellen. Der „Proof-of-Concept“ Meilenstein wurde mit der Demonstration eines funktionsfähigen Modells im Dezember 2015 erfolgreich abgeschlossen. Y1 - 2016 ER - TY - PAT A1 - Bagheri, Mohsen A1 - Dahmann, Peter T1 - Kletterroboter mit Gurtantrieb international [Offenlegungsschrift] T1 - Climbing robot for masts [Europäische Patentanmeldung / Internationale Patentanmeldung / US Patentanmeldung] Y1 - 2012 SP - 1 EP - 20 PB - Deutsches Patentamt / Europäisches Patentamt / WIPO / USPTO CY - München / Den Hague / Genf / Alexandria, Virginia ER - TY - PAT A1 - Bagheri, Mohsen T1 - Mobile Wartungshalle für Kletterroboter für Masten [Europäische Patentanmeldung] Y1 - 2013 SP - 1 EP - 19 PB - Europäisches Patentamt CY - Den Hague ER - TY - CHAP A1 - Bagayoko, Lamine A1 - Geissler, Karsten A1 - Koch, Eckart T1 - Dynamik bei Eisenbahnbrücken T2 - Stahlbau-Kalender : [Eurocode-3-Grundnorm; Brücken] ; Jg. 14 / hrsg. von Ulrike Kuhlmann Y1 - 2012 SN - 978-3-433-02988-6 SP - 575 EP - 632 PB - Ernst & Sohn CY - Berlin ER - TY - THES A1 - Baeßler, Franziska A1 - Kleinkunen, Tristan T1 - MOBI: zukunftsorientiertes modulares Baukastensystem für Bibliotheken N2 - Das Ziel des Bibliothekskonzeptes ist es, Hybridbibliotheken als Symbiose aus zukunftsweisender Medientechnologie und klassischer Funktionalität in Modulbauweise in Bestandsarchitektur zu integrieren. Der Lösungsansatz liegt in einer kostengünstigen dynamischen Modularität, welche als Plug-In, Add-On, Single oder Mobilkonzept nutzbar ist. Das modulare System setzt hierbei auf Grundmodule, welche für unterschiedlichste räumliche Gegebenheiten skaliert werden können. Somit können Einrichtungen neue Funktionalitäten integrieren oder auf temporäre Anforderungen strategisch reagieren. Durch die einfache Montage und Transportfähigkeit lassen sich sehr schnell zeitbegrenzte oder dauerhafte Raumkonzepte umsetzen. Das System nimmt die Dynamik des sich verändernden Bedarfs auf und passt sich flexibel den Zielgruppen an, was im Gegensatz dazu bei statischen Systemen nicht der Fall ist. KW - Modularität KW - Bibliothek KW - Library Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Backes, Klaus A1 - Faber, Christian A1 - Hafner, Bernd A1 - Schwarzer, Klemens T1 - Parameteridentifikation an thermischen Speichern T2 - 8. Symposium Thermische Solarenergie : Ort: Bildungszentrum der Hanns-Seidel-Stiftung, Kloster Banz, Staffelstein. Termin: 13. - 15. Mai 1998 / OTTI, Technologie-Kolleg Y1 - 1998 SP - 293 EP - 297 PB - OTTI CY - Regensburg ER - TY - JOUR A1 - Backes, Klaus A1 - Adam, Mario A1 - Gottschald, Beng Jonas A1 - Faber, Christian A1 - Henneböhl, Friedrich-Gregor A1 - Lanz, Marco A1 - Anthrakidis, Anette T1 - KWKK-Anlagen im Feldtest. Optimaler Betrieb durch Verbesserungen bei Regelung und Hydraulik JF - Die Kälte- und Klimatechnik Y1 - 2012 SN - 0343-2246 IS - 2 PB - Gentner CY - Stuttgart ER - TY - BOOK A1 - Bachem, Dirk A1 - Pietschmann, Bernd P. T1 - Das duale Studium : Eine Möglichkeit, sich vor dem kommenden Fach- und Führungskräftemangel wirkungsvoll zu wappnen ; Informationen für Unternehmen, Studieneinrichtungen und zukünftige Studenten Y1 - 2011 SN - 978-3-942845-04-5 PB - VAWW, Verl. für Angewandte Wirtschaftswiss. CY - Köln ER - TY - JOUR A1 - Babilon, Katharina A1 - Wilbring, Daniela A1 - Tappert, Tim A1 - Pfaff, Raphael A1 - Enning, Manfred T1 - Schienenfahrzeugtechnik hands on – FH Aachen IMechE Railway Challenge JF - Ingenieurspiegel Y1 - 2018 SN - 1868-5919 IS - 2 SP - 20 EP - 22 PB - Public Verlag CY - Bingen ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 1 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 21 IS - 2 SP - 35 EP - 38 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 2 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 212 IS - 3 SP - 77 EP - 80 PB - VDI-Verlag CY - Düsseldorf ER - TY - BOOK A1 - Baatz, Udo A1 - Sander, Ralf A1 - Langhoff, R. T1 - Studienführer für der Fachbereich 8 Maschinenbau FH Aachen Y1 - 1996 PB - Stercken-Verl. CY - Aachen ER - TY - JOUR A1 - Baatz, Udo A1 - Opitz, Herwart A1 - Wiendahl, Hans Peter T1 - Bildschirmunterstütztes Konstruieren - Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe der Menütechnik JF - Industrieanzeiger Y1 - 1970 SN - 0019-9036 VL - 92 IS - 98 SP - 2371 EP - 2374 PB - Konradin CY - Leinfelden-Echterdingen ER - TY - JOUR A1 - Baatz, Udo A1 - Kehrmann, H. T1 - Neue Produkte - per Zufall oder mit System? JF - Jahrbuch für Führungskräfte Y1 - 1981 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Baatz, Udo A1 - Butz, Hans-Werner A1 - Bäck, Karin T1 - Aspekte der Bildschirmprogrammierung im Rahmen des rechnergestützten Konstruierens. Some aspects of CRT-screen programming in computer aided design. JF - eR - Elektronische Rechenanlagen N2 - In den letzten Jahren hat der Einsatz von graphischen Datenverarbeitungsanlagen auf dem technischen, naturwissenschaftlichen und kommerziellen Sektor immer mehr an allgemeinem Interesse und Bedeutung gewonnen. Diese Entwicklung hat neue Aspekte und Probleme in bezug auf Anwendungsmöglichkeiten, Programmierung, Datenstrukturen sowie der Hard- und Software dieser Anlagen hervorgerufen. Zur Zeit werden von verschiedenen Institutionen die Einsatzmöglichkeiten graphischer Datenverarbeitungsanlagen in den Funktionsbereichen Konstruktion und Arbeitsvorbereitung untersucht. Der folgende Beitrag zeigt eine kurze Übersicht über die verschiedenen programmiertechnischen Probleme sowie eine Auswahl von Programmbeispielen, die am Laboratorium für Werkzeugmaschinen und Betriebslehre der RWTH Aachen entwickelt wurden. Bei den Bildschirmsystemen wird zwischen zwei Arten unterschieden. Aktive Bildschirmeinheiten besitzen als äußeres Merkmal einen Lichtstift und eine Funktionstastatur zur Programmverzweigung. Passive Bildschirmeinheiten lassen demgegenüber einen Eingriff in das Programm in der oben aufgeführten Form nicht zu. Zwischen diesen extremen Formen gibt es noch eine Reihe Mischformen. Die in Aachen zur Verfügung stehende Anlage arbeitet aktiv und wird im nachfolgenden Kapitel näher beschrieben. Y1 - 1972 SN - 0013-5720 U6 - https://doi.org/10.1524/itit.1972.14.16.229 VL - 14 IS - 5 SP - 229 EP - 235 PB - Oldenbourg CY - München ER - TY - JOUR A1 - Baatz, Udo A1 - Butz, Hans-Werner T1 - Rechnerunterstuetztes Konstruieren mit Symbolen JF - TZ für praktische Metallbearbeitung Y1 - 1972 SN - 0177-8900 VL - 66 IS - 9 SP - 366 EP - 370 PB - Grossmann CY - Stuttgart ER - TY - BOOK A1 - Baatz, Udo T1 - CAD/CAM - Compass Maschinenbau. Ein Leitfaden für die optimale Systemauswahl CAD/CNC/CAM/CAE/PPS Y1 - 1993 N1 - CAD Information und Beratung, Jahrbücher 198o - 1993 PB - CADIB CY - Aachen ER - TY - BOOK A1 - Baatz, Udo T1 - CAD/CAM im Maschinenbau - wohin geht der Weg? Y1 - 1985 N1 - ZENIT - Zentrum für Innovation und Technik in NRW0 ; Info 4 CY - Mülheim a.d. Ruhr ER - TY - BOOK A1 - Baatz, Udo T1 - Nutzwertanalyse von CAD - Systemen der unteren und mittleren Preisklasse für dem Maschinenbau Y1 - 1985 N1 - Sonderdruck für: ZENIT - Zentrum für Innovation und Technik, NRW CY - Mülheim a.d. Ruhr ER - TY - JOUR A1 - Baatz, Udo T1 - Neue Aspekte der Integrierten Qualitätssicherung für Automobil - Zulieferer JF - Jahrbuch für Ingenieure Y1 - 1979 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - BOOK A1 - Baatz, Udo T1 - Bildschirmunterstütztes Konstruieren : Funktionsfindung, Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe graphischer Datenverarbeitungsanlagen Y1 - 1971 N1 - Diss., RWTH Aachen CY - Aachen ER - TY - JOUR A1 - Baatz, Udo T1 - Erstellung von Einzelteilzeichnungen mittels graphischer Datenverarbeitungsanlagen JF - Konstruktion Y1 - 1972 SN - 0720-5953 VL - 24 IS - 9 SP - 360 EP - 369 PB - VDI Fachmedien CY - Düsseldorf ER - TY - BOOK A1 - Baatz, Udo T1 - Bildschirmunterstütztes Konstruieren Y1 - 1973 SN - 3-18-403039-3 N1 - Zugl.: Aachen, Techn. Hochsch., Diss. 1971. - (VDI-Taschenbücher ; T 39) PB - VDI-Verl. CY - Duesseldorf ER - TY - BOOK A1 - Baatz, Udo T1 - Diplom-Ingenieur / Diplom-Ingenieurin an Fachhochschulen: Fachrichtung Maschinenbau : Stand: Dezember 1980 Y1 - 1981 N1 - Bundesanstalt für Arbeit (Nürnberg) ; Verein Deutscher Ingenieure; Blätter zur Berufskunde ; vol 0002,ip,30 PB - Bertelsmann CY - Bielefeld ER - TY - JOUR A1 - Baatz, Udo T1 - Zukaufteile in Maschinenbauprodukten JF - ZWF Zeitschrift für wirtschaftliche Fertigung und Automatisierung N2 - Die technischen und wirtschaftlichen Anforderungen, die heutzutage an moderne Maschinen, Geräte und Apparate gestellt werden, steigen ständig. Immer häufiger sehen sich die Konstrukteure gezwungen, geforderte Funktionen mit Hilfe zugekaufter Normeinzelteile, Bauelemente und Funktionsgruppen zu erfüllen. Bei dieser Entwicklung vergrößert sich die Zahl der von den Spezialherstellern angebotenen Zukaufteile überproportional, in gleichem Maße geht dem Anwender die Übersicht über das Zukaufteilespektrum verloren. Zunächst wird in diesem Bericht diese Entwicklung anhand einer im allgemeinen Maschinenbau durchgeführten Befragung aufgezeigt. Anschließend soll darauf aufbauend ein Ordnungssystem vorgestellt werden, welches jedem Unternehmen wieder eine Übersicht über das am Markt angebotene Zukaufteilespektrum ermöglicht. Y1 - 1972 SN - 0044-3743 U6 - https://doi.org/10.1515/zwf-1972-670603 VL - 67 IS - 6 SP - 301 EP - 310 PB - Hanser CY - München ER - TY - JOUR A1 - Baatz, Udo T1 - 82.000 FL/h - Eine neue Dimension in der Abfüllung von Erfrischungsgetränken JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 VL - 27 IS - 14 SP - 341 EP - 345 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo T1 - Flaschenbehandlung bei hohen Leistungen – Problemstellung und Lösungsmöglichkeiten JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 VL - 27 IS - 15 SP - 1175 EP - 1178 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo T1 - Zur Problematik der Etikettenentfernung JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 N1 - Tagungs-Sondernummer VL - 27 IS - 39 SP - 926 EP - 928 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo T1 - Wie erkennt man Rationalisierungsreserven im Konstruktionsbereich JF - Das Jahrbuch für Ingeneure 79 : aktuelles Wissen aus Forschung u. Praxis / Bartz, Wilfried J.; Wippler, Elmar Y1 - 1979 SN - 0171-3809 SP - 263 EP - 268 PB - Expert-Verl. CY - Grafenau, Württ. ER - TY - CHAP A1 - Baader, Fabian A1 - Reiswich, M. A1 - Bartsch, M. A1 - Keller, D. A1 - Tiede, E. A1 - Keck, G. A1 - Demircian, A. A1 - Friedrich, M. A1 - Dachwald, Bernd A1 - Schüller, K. A1 - Lehmann, R. A1 - Chojetzki, R. A1 - Durand, C. A1 - Rapp, L. A1 - Kowalski, Julia A1 - Förstner, R. T1 - VIPER - Student research on extraterrestrical ice penetration technology T2 - Proceedings of the 2nd Symposium on Space Educational Activities N2 - Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process. Y1 - 2018 SP - 1 EP - 6 ER - TY - CHAP A1 - Baader, Fabian A1 - Keller, Denis A1 - Lehmann, Raphael A1 - Gerber, Lukas A1 - Reiswich, Martin A1 - Dachwald, Bernd A1 - Förstner, Roger T1 - Operating melting probes for ice penetration under sublimation conditions and in reduced gravity on a sounding rocket T2 - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research Y1 - 2019 SN - 0379-6566 N1 - 24th PAC Symposium 2019 ER - TY - JOUR A1 - Baader, Fabian A1 - Boxberg, Marc S. A1 - Chen, Qian A1 - Förstner, Roger A1 - Kowalski, Julia A1 - Dachwald, Bernd T1 - Field-test performance of an ice-melting probe in a terrestrial analogue environment JF - Icarus N2 - Melting probes are a proven tool for the exploration of thick ice layers and clean sampling of subglacial water on Earth. Their compact size and ease of operation also make them a key technology for the future exploration of icy moons in our Solar System, most prominently Europa and Enceladus. For both mission planning and hardware engineering, metrics such as efficiency and expected performance in terms of achievable speed, power requirements, and necessary heating power have to be known. Theoretical studies aim at describing thermal losses on the one hand, while laboratory experiments and field tests allow an empirical investigation of the true performance on the other hand. To investigate the practical value of a performance model for the operational performance in extraterrestrial environments, we first contrast measured data from terrestrial field tests on temperate and polythermal glaciers with results from basic heat loss models and a melt trajectory model. For this purpose, we propose conventions for the determination of two different efficiencies that can be applied to both measured data and models. One definition of efficiency is related to the melting head only, while the other definition considers the melting probe as a whole. We also present methods to combine several sources of heat loss for probes with a circular cross-section, and to translate the geometry of probes with a non-circular cross-section to analyse them in the same way. The models were selected in a way that minimizes the need to make assumptions about unknown parameters of the probe or the ice environment. The results indicate that currently used models do not yet reliably reproduce the performance of a probe under realistic conditions. Melting velocities and efficiencies are constantly overestimated by 15 to 50 % in the models, but qualitatively agree with the field test data. Hence, losses are observed, that are not yet covered and quantified by the available loss models. We find that the deviation increases with decreasing ice temperature. We suspect that this mismatch is mainly due to the too restrictive idealization of the probe model and the fact that the probe was not operated in an efficiency-optimized manner during the field tests. With respect to space mission engineering, we find that performance and efficiency models must be used with caution in unknown ice environments, as various ice parameters have a significant effect on the melting process. Some of these are difficult to estimate from afar. Y1 - 2023 U6 - https://doi.org/10.1016/j.icarus.2023.115852 N1 - Forschungsdaten hierzu: "Performance data of an ice-melting probe from field tests in two different ice environments" (https://opus.bibliothek.fh-aachen.de/opus4/frontdoor/index/index/docId/10890) IS - 409 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Azat, Seitkhan A1 - Kerimkulova, Almagul R. A1 - Mansurov, Zulkhair A. A1 - Adekenov, Sergazy A1 - Artmann, Gerhard T1 - The Use of Fusicoccin as Anticancer Compound T2 - Carbon Nanomaterials in Biomedicine and the Environment N2 - The problem of creation and use of sorption materials is of current interest for the practice of the modern medicine and agriculture. Practical importance is production of a biostimulant using a carbon sorbent for a significant increase in productivity, which is very relevant for the regions of Kazakhstan. It is known that a plant phytohormone—fusicoccin—in nanogram concentrations transforms cancer cells to the state of apoptosis. In this regard, there is a scientific practical interest in the development of a highly efficient method for producing fusicoccin from extract of germinated wheat seeds. According to the results of computer modeling, cleaning composite components of fusicoccin using microporous carbon adsorbents not suitable as the size of the molecule of fusicoccin more than micropores and the optimum pore size for purification of constituents of fusicoccin was determined by computer simulation. Y1 - 2020 SN - 978-0-429-42864-7 U6 - https://doi.org/10.1201/9780429428647-8 SP - 149 EP - 172 PB - Jenny Stanford Publishing CY - New York ER - TY - CHAP A1 - Azar, Fouad A1 - Digel, Ilya ED - Staat, Manfred ED - Erni, Daniel T1 - Utilization of fluorescence spectroscopy and neural networks in clinical analysis T2 - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen N2 - Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis. Y1 - 2019 SN - 978-3-940402-22-6 U6 - https://doi.org/10.17185/duepublico/48750 SP - 40 EP - 41 PB - Universität Duisburg-Essen CY - Duisburg ER -