TY  - CHAP
A1  - Granat, Andreas
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Intrusion Detection of the ICS Protocol EtherCAT
N2  - Control mechanisms like Industrial Controls Systems (ICS) and its subgroup SCADA (Supervisory Control and Data Acquisition) are a prerequisite to automate industrial processes. While protection of ICS on process management level is relatively straightforward – well known office IT security mechanisms can be used – protection on field bus level is harder to achieve as there are real-time and production requirements like 24x7 to consider. One option to improve security on field bus level is to introduce controls that help to detect and to react on attacks. This paper introduces an initial set of intrusion detection mechanisms for the field bus protocol EtherCAT. To this end existing Ethernet attack vectors including packet injection and man-in-the-middle attacks are tested in an EtherCAT environment, where they could interrupt the EtherCAT network and may even cause physical damage. Based on the signatures of such attacks, a preprocessor and new rule options are defined for the open source intrusion detection system Snort demonstrating the general feasibility of intrusion detection on field bus level.
Y1  - 2017
N1  - International Conference on Computer, Network Security and Communication Engineering (CNSCE 2017), March 26-27, 2017, Bangkok, Thailand
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League
T2  - RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_53
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 634
EP  - 642
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Noureddine, Yacine
A1  - Kraff, Oliver
A1  - Ladd, Mark E.
A1  - Wrede, Karsten H.
A1  - Chen, Bixia
A1  - Quick, Harald H.
A1  - Schaefers, Gregor
A1  - Bitz, Andreas
T1  - In vitro and in silico assessment of RF-induced heating around intracranial aneurysm clips at 7 Tesla
JF  - Magnetic Resonance in Medicine
Y1  - 2017
U6  - http://dx.doi.org/10.1002/mrm.26650
SN  - 1522-2594
IS  - Early view
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Improvements for a robust production in the RoboCup logistics league 2016
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_49
SP  - 589
EP  - 600
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
A1  - Dietze, Christian
ED  - Maedche, Alexander
ED  - vom Brocke, Jan
ED  - Hevner, Alan
T1  - Domain-Specific reference modeling in the telecommunications industry
T2  - DESRIST 2017: Designing the Digital Transformation
N2  - The telecommunications industry is currently going through a major transformation. In this context, the enhanced Telecom Operations Map (eTOM) is a domain-specific process reference model that is offered by the industry organization TM Forum. In practice, eTOM is well accepted and confirmed as de facto standard. It provides process definitions and process flows on different levels of detail. This article discusses the reference modeling of eTOM, i.e., the design, the resulting artifact, and its evaluation based on three project cases. The application of eTOM in three projects illustrates the design approach and concrete models on strategic and operational levels. The article follows the Design Science Research (DSR) paradigm. It contributes with concrete design artifacts to the transformational needs of the telecommunications industry and offers lessons-learned from a general DSR perspective.
KW  - enhanced Telecom Operations Map (eTOM)
KW  - Process reference model
KW  - Process design
KW  - Map (eTOM) Process reference model Process design Telecommunications industry
Y1  - 2017
SN  - 978-3-319-59144-5
SN  - 978-3-319-59143-8
U6  - http://dx.doi.org/10.1007/978-3-319-59144-5_19
N1  - Designing the Digital Transformation 12th International Conference, DESRIST 2017, Karlsruhe, Germany, May 30 - June 1, 2017.
SP  - 313
EP  - 329
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Zwilling, Frederik
A1  - Lakemeyer, Gerhard
A1  - Löbach, Matthias
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Ferrein, Alexander
T1  - Cyber-Physical System Intelligence
T2  - Industrial Internet of Things
N2  - Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.
KW  - Smart factory
KW  - Industry 4.0
KW  - Multi-robot systems
KW  - Autonomous mobile robots
KW  - RoboCup
Y1  - 2017
SN  - 978-3-319-42559-7
U6  - http://dx.doi.org/10.1007/978-3-319-42559-7_17
N1  - Springer Series in Wireless Technology
SP  - 447
EP  - 472
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Johst, Sören
A1  - Gratz, Marcel
A1  - Völker, Maximilian N.
A1  - Kraff, Oliver
A1  - Abuelhaija, Ashraf
A1  - Fiedler, Thomas M.
A1  - Solbach, Klaus
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI
JF  - Frontiers in Physics
Y1  - 2017
U6  - http://dx.doi.org/10.3389/fphy.2017.00017
SN  - 2296-424X
N1  - Article number 17
VL  - 5
IS  - Jun
ER  - 
TY  - CHAP
A1  - Zug, Sebastian
A1  - Niemueller, Tim
A1  - Hochgeschwender, Nico
A1  - Seidensticker, Kai
A1  - Seidel, Martin
A1  - Friedrich, Tim
A1  - Neumann, Tobias
A1  - Karras, Ulrich
A1  - Kraetzschmar, Gerhard K.
A1  - Ferrein, Alexander
T1  - An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_13
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 157
EP  - 168
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Pfaffenrot, Viktor
A1  - Bitz, Andreas
A1  - Orzada, Stephan
A1  - Brunheim, Sascha
A1  - Lazik-Palm, Andrea
A1  - Theysohn, Jens M.
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
A1  - Kraff, Oliver
T1  - An 8-channel transceiver 7-channel receive RF coil setup for high SNR ultrahigh-field MRI of the shoulder at 7T
JF  - Medical Physics
Y1  - 2017
U6  - http://dx.doi.org/10.1002/mp.12612
SN  - 0094-2405
IS  - Article in press
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Schänzle, Christian
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Algorithmic system design using scaling and affinity laws
T2  - Operations Research Proceedings 2015
N2  - Energy-efficient components do not automatically lead to energy-efficient systems. Technical Operations Research (TOR) shifts the focus from the single component to the system as a whole and finds its optimal topology and operating strategy simultaneously. In previous works, we provided a preselected construction kit of suitable components for the algorithm. This approach may give rise to a combinatorial explosion if the preselection cannot be cut down to a reasonable number by human intuition. To reduce the number of discrete decisions, we integrate laws derived from similarity theory into the optimization model. Since the physical characteristics of a production series are similar, it can be described by affinity and scaling laws. Making use of these laws, our construction kit can be modeled more efficiently: Instead of a preselection of components, it now encompasses whole model ranges. This allows us to significantly increase the number of possible set-ups in our model. In this paper, we present how to embed this new formulation into a mixed-integer program and assess the run time via benchmarks. We present our approach on the example of a ventilation system design problem.
KW  - Optimal Topology
KW  - Piecewise Linearization
KW  - Ventilation System
KW  - Similarity Theory
Y1  - 2017
SN  - 978-3-319-42901-4
SN  - 978-3-319-42902-1
U6  - http://dx.doi.org/10.1007/978-3-319-42902-1
N1  - International Conference of the German, Austrian and Swiss Operations Research Societies (GOR, ÖGOR, SVOR/ASRO), University of Vienna, Austria, September 1-4, 2015
SP  - 605
EP  - 611
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Marco, Heather G.
A1  - Ferrein, Alexander
T1  - AGNES: The African-German Network of Excellence in Science
T2  - Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017
Y1  - 2017
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A System Layout for Cognitive Service Robots
T2  - Cognitive Robot Architectures. Proceedings of EUCognition 2016
Y1  - 2017
SN  - 1613-0073
N1  - CEUR-WS Vol-1855
SP  - 44
EP  - 45
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Dörig, Bastian
A1  - Ederer, Thorsten
A1  - Pelz, Peter Franz
A1  - Pfetsch, Marc
A1  - Wolf, Jan
T1  - A mixed-integer nonlinear program for the design of gearboxes
T2  - Operations Research Proceedings 2016
N2  - Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.
Y1  - 2017
SN  - 978-3-319-55701-4
U6  - http://dx.doi.org/10.1007/978-3-319-55702-1_31
SP  - 227
EP  - 233
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Walenta, Robert
A1  - Schellekens, Twan
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A decentralised system approach for controlling AGVs with ROS
T2  - AFRICON, Proceedings
Y1  - 2017
SN  - 978-1-5386-2775-4
U6  - http://dx.doi.org/10.1109/AFRCON.2017.8095693
SN  - 2153-0033
N1  - AFRICON <2017, 18-20 Sept., Cape Town, South Africa>
SP  - 1436
EP  - 1441
PB  - IEEE
ER  -