TY - JOUR
A1 - Ziemons, Karl
A1 - Auffray, E.
A1 - Barbier, R.
A1 - Brandenburg, G.
A1 - Bruyndonckx, P.
T1 - The ClearPET™ project: Development of a 2nd generation high-performance small animal PET scanner
JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
N2 - Second generation high-performance PET scanners, called ClearPET™1, have been developed by working groups of the Crystal Clear Collaboration (CCC). High sensitivity and high spatial resolution for the ClearPET camera is achieved by using a phoswich arrangement combining two different types of lutetium-based scintillator materials: LSO from CTI and LuYAP:Ce from the CCC (ISTC project). In a first ClearPET prototype, phoswich arrangements of 8×8 crystals of 2×2×10 mm3 are coupled to multi-channel photomultiplier tubes (Hamamatsu R7600). A unit of four PMTs arranged in-line represents one of 20 sectors of the ring design. The opening diameter of the ring is 120 mm, the axial detector length is 110 mm.The PMT pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the exact pulse starting time, which is subsequently used for coincidence detection. The gantry allows rotation of the detector modules around the field of view.
Preliminary data shows a correct identification of the crystal layer about (98±1)%. Typically the energy resolution is (23.3±0.5)% for the luyap layer and (15.4±0.4)% for the lso layer. early studies showed the timing resolution of 2 ns FWHM and 4.8 ns FWTM. the intrinsic spatial resolution ranges from 1.37 mm to 1.61 mm full-width of half-maximum (FWHM) with a mean of 1.48 mm FWHM. further improvements in image and energy resolution are expected when the system geometry is fully modeled.
Y1 - 2005
SN - 0168-9002
N1 - Proceedings of the 7th International Conference on Inorganic Scintillators and their Use in Scientific and Industrial Applications
VL - 537
IS - 1-2
SP - 307
EP - 311
ER -
TY - CHAP
A1 - Braun, Carsten
A1 - Boucke, Alexander
A1 - Ballmann, Josef
T1 - Numerical prediction of the wing deformation of a high speed transport aircraft type wind tunnel model by direct aeroelastic simulation
T2 - Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : München, June 28 - July 1, 2005. DGLR-Bericht. 2005,04
Y1 - 2005
SN - 3-932182-43-X
PB - DGLR
CY - Bonn
ER -
TY - CHAP
A1 - Braun, Carsten
A1 - Boucke, Alexander
A1 - Ballmann, Josef
T1 - Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model
T2 - High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...
Y1 - 2005
SN - 3-540-22943-4
SP - 225
EP - 236
PB - Springer
CY - Berlin
ER -
TY - CHAP
A1 - Müller, Karsten
A1 - Rohlfing, Richard
A1 - Hueben, Susanne
T1 - Entwicklung und Umsetzung von Sanierungsstrategien am Beispiel der Stadt Rheine
T2 - 6. Kölner Kanal-Kolloquium : 07. und 08. September 2005 im Maternushaus, Köln / hrsg. von Johannes Pinnekamp ... Aachener Schriften zur Stadtentwässerung. Bd. 6
Y1 - 2005
SN - 3-932-590-98-8
SP - 9/1
EP - 9/18
PB - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY - Aachen
ER -
TY - THES
A1 - Müller, Karsten
T1 - Strategien zur Zustandserfassung von Kanalisationen
Y1 - 2005
N1 - Aachen, Techn. Hochsch., Diss., 2005
ER -
TY - CHAP
A1 - Göttsche, Joachim
T1 - Der vertikale Sonnenlichtquotient : eine wichtige Kenngröße zur Charakterisierung von Lichtlenksystemen
T2 - Elftes Symposium Innovative Lichttechnik in Gebäuden : 27./28. Januar 2005, Kloster Banz
Y1 - 2005
SN - 3-934681-37-9
SP - 79
EP - 84
PB - OTTI-Energie-Kolleg
CY - Regensburg
ER -
TY - CHAP
A1 - Hoffschmidt, Bernhard
T1 - Solarer Luftkollektor - Entwicklung und Optimierung von bestehenden Fassadenelementen
T2 - 15. Symposium Thermische Solarenergie : 27. bis 29. April 2005, Kloster Banz, Bad Staffelstein
Y1 - 2005
SN - 3-934681-39-5
SP - 106
EP - 111
PB - OTTI-Energie-Kolleg
CY - Regensburg
ER -
TY - CHAP
A1 - Hoffschmidt, Bernhard
T1 - Entwicklung eines modularen und effizienten Parabolrinnenkollektors
T2 - 15. Symposium Thermische Solarenergie : 27. bis 29. April 2005, Kloster Banz, Bad Staffelstein
Y1 - 2005
SN - 3-934681-39-5
SP - 158
EP - 163
PB - OTTI-Energie-Kolleg
CY - Regensburg
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Brandenburg, Annette
A1 - Schleser, Markus
T1 - Mikrokleben
T2 - Montage hybrider Mikrosysteme : Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Y1 - 2005
SN - 978-3-540-23706-8
SP - 161
EP - 172
PB - Springer
CY - Berlin [u.a.]
ER -
TY - CHAP
A1 - Kolkmann, Annette
A1 - Gries, Thomas
A1 - Schleser, Markus
A1 - Dilthey, Ulrich
T1 - Innovative yarn structures and coatings for textile reinforced concrete
T2 - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1 - 2005
CY - Frankfurt a.M.
ER -
TY - JOUR
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Geßler, Achim
A1 - Rettweiler, Timo
A1 - Völling, Boris
T1 - Kleben textilbewehrter Betonbauteile
JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8
Y1 - 2005
SN - 0036-7184
SP - 373
EP - 377
ER -
TY - JOUR
A1 - Schnitzler, Thomas
A1 - Biselli, Manfred
T1 - Cultivo de lineas celulares de hibridoma por CF-10H5 (DSMZ ACC477) en el BIOSTAT B plus
JF - Noticias tecnicas del laboratorio
Y1 - 2005
VL - 13
IS - 3
SP - 7
EP - 8
ER -
TY - JOUR
A1 - Polen, T.
A1 - Krämer, Marco
A1 - Bongaerts, Johannes
A1 - Wubbolts, Marcel
A1 - Wendisch, V. F.
T1 - The global gene expression response of Escherichia coli to L-phenylalanine
JF - Journal of biotechnology
Y1 - 2005
SN - 1873-4863 (E-Journal); 0168-1656 (Print)
VL - Vol. 115
IS - Iss. 3
SP - 221
EP - 237
ER -
TY - JOUR
A1 - Hellwig, Angelika
A1 - Rautenbach, Dieter
A1 - Volkmann, Lutz
T1 - Cuts leaving components of given minimum order
JF - Discrete mathematics
Y1 - 2005
SN - 1872-681X (E-Journal); 0012-365X (Print)
VL - Vol. 292
IS - Iss. 1-3
SP - 55
EP - 65
ER -
TY - JOUR
A1 - Hellwig, Angelika
A1 - Volkmann, Lutz
T1 - Neighborhood conditions for graphs and digraphs to be maximally edge-connected
JF - Australasian journal of combinatorics
Y1 - 2005
SN - 10344942 ; 22023518
VL - Vol. 33
SP - 265
EP - 277
ER -
TY - JOUR
A1 - Hellwig, Angelika
A1 - Volkmann, Lutz
T1 - Sufficient conditions for graphs to be λ′-optimal, super-edge-connected, and maximally edge-connected
JF - Journal of graph theory
Y1 - 2005
SN - 03649024
VL - Vol. 48
IS - Iss. 3
SP - 228
EP - 246
ER -
TY - JOUR
A1 - Xu, Jung-Ming
A1 - Lü, Min
A1 - Ma, Meijie
A1 - Hellwig, Angelika
T1 - Super connectivity of line graphs
JF - Information processing letters
Y1 - 2005
SN - 1872-6119 (E-Journal); 0020-0190 (Print)
VL - Vol. 94
IS - Iss. 4
SP - 191
EP - 195
ER -
TY - JOUR
A1 - Alt, Helmut
T1 - Wunschphantasie eines eingefleischten Kernenergiegegners : zur Rede von Bundesumweltminister Jürgen Trittin auf dem VDEW-Kongress 2005 "Die Energieversorgung der Zukunft"
JF - EW : das Magazin für die Energie-Wirtschaft
Y1 - 2005
SN - 0013-5496
N1 - Printausg. in der Bibliothek vorhanden: 23 Z 585
VL - Bd. 104
IS - H. 17/18
SP - 7
ER -
TY - JOUR
A1 - Alt, Helmut
T1 - Versorgungssicherheit und Windenergie : Tatsachen und Fakten statt Mythen und Mysterien
JF - EW : das Magazin für die Energie-Wirtschaft
Y1 - 2005
SN - 0013-5496
N1 - Printaus. in der Bibliothek vorhanden: 23 Z 585
VL - Bd. 104
IS - H. 25
SP - 42
EP - 45
ER -
TY - CHAP
A1 - Gligorevic, Snjezana
A1 - Brandes, Sinja
A1 - Cosovic, I.
A1 - Schnell, Michael
T1 - B-VHF, ein 'Overlay'-System für die ATC Kommunikation im VHF Band
T2 - Motto: Luft- und Raumfahrt - Grenzen überwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005
Y1 - 2005
SP - 951
EP - 958
PB - DGLR
CY - Bonn
ER -
TY - JOUR
A1 - Pauksztat, Anja
A1 - Kuperjans, Isabel
A1 - Meyer, Jörg
T1 - Formeln statt Zahlen : Referenzwerte Formeln zur energetischen Bewertung von Produktionsanlagen
JF - BWK : das Energie-Fachmagazin
Y1 - 2005
SN - 0006-9612
SN - 1618-193X
VL - 57
IS - 12
SP - 52
EP - 55
ER -
TY - JOUR
A1 - Kuperjans, Isabel
A1 - Gürzenich, D.
A1 - Roosen, P.
T1 - Kostenfunktionen im WWW : Unterstützung der Auslegung energietechnischer Anlagen und deren Verschaltungen
JF - Gaswärme international (GWI)
Y1 - 2005
SN - 0020-9384
VL - 54
IS - 1
SP - 19
EP - 21
ER -
TY - CHAP
A1 - Augenstein, Eckardt
A1 - Herbergs, S.
A1 - Kuperjans, Isabel
T1 - TOP-Energy : softwaregestützte Analyse und Optimierung industrieller Energieversorgungssysteme ; Postershow
T2 - Optimierung in der Energiewirtschaft : Tagung Stuttgart, 27. und 28. Oktober 2005. - (VDI-Berichte ; 1908)
Y1 - 2005
SN - 3-18-091908-6
SP - 279
EP - 282
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - JOUR
A1 - Pauksztat, Anja
A1 - Kuperjans, Isabel
A1 - Meyer, Jörg
T1 - Produktbezogene Referenzwerte für Energieeffizienz und CO2-Emissionen
JF - Energiewirtschaftliche Tagesfragen : et ; Zeitschrift für Energiewirtschaft, Recht, Technik und Umwelt
Y1 - 2005
SN - 0013-743X
SN - 0720-6240
VL - 55
IS - 6
SP - 374
EP - 376
ER -
TY - CHAP
A1 - Augenstein, Eckardt
A1 - Herbergs, S.
A1 - Kuperjans, Isabel
A1 - Lucas, K.
ED - Kjelstrup, Signe
T1 - Simulation of industrial energy supply systems with integrated cost optimization
T2 - Proceedings of ECOS 2005, the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems : Trondheim, Norway, June 20 - 22, 2005. - Vol. 2
Y1 - 2005
SN - 82-519-2041-8
N1 - CD-ROM-Ausg. u.d.T.: Shaping our future energy systems
SP - 627
EP - 634
PB - Tapir Academic Press
CY - Trondheim
ER -
TY - JOUR
A1 - Siegert, Petra
A1 - McLeish, Michael J.
A1 - Baumann, Martin
A1 - Iding, Hans
A1 - Kneen, Malea M.
A1 - Kenyon, George L.
A1 - Pohl, Martina
T1 - Exchanging the substrate specificities of pyruvate decarboxylase from Zymomonas mobilis and benzoylformate decarboxylase from Pseudomonas putida
JF - Protein engineering, design, and selection : peds
Y1 - 2005
SN - 1460-213X (E-Journal); 1741-0134 (E-Journal); 0269-2139 (Print); 1741-0126 (Print)
VL - Vol. 18
IS - Iss. 7
SP - 345
EP - 357
ER -
TY - PAT
A1 - Schulze zur Wiesche, Erik
A1 - Otto, Ralf
A1 - Kleen, Astrid
A1 - Hollenberg, Detlef
A1 - Sättler, Andrea
A1 - Siegert, Petra
A1 - Boßmann, Britta
T1 - Verfahren zur dauerhaften Ausrüstung keratinischer Fasern mit Pflegewirkstoffen durch Carboxylesterhydrolasen [Offenlegungsschrift]
T1 - Method for the permanent deposition of conditioning agents on keratinic fibres using carboxylester hydrolases [Europäische Patentanmeldung]
Y1 - 2005
SP - 1
EP - 13
PB - Deutsches Patent- und Markenamt / Europäisches Patentamt
CY - München / Den Hague
ER -
TY - PAT
A1 - Kluin, Cornelia
A1 - Maurer, Karl-Heinz
A1 - Banowski, Bernhard
A1 - Bessler, Cornelius
A1 - Siegert, Petra
T1 - Verwendung von Siderophoren gegen Geruchskeime [Offenlegungsschrift]
T1 - Use of siderophores for control of odor-producing bacteria, particularly for treating or preventing body odor, act by depriving bacteria of iron
Y1 - 2005
SP - 1
EP - 32
PB - Deutsches Patent- und Markenamt
CY - München
ER -
TY - PAT
A1 - Banowski, Bernhard
A1 - Wadle, Armin
A1 - Siegert, Petra
T1 - Use of hydroxydiphenyl ether derivatives as arylsulfatase-inhibitors in deodorants and antiperspirants [Europäische Patentanmeldung / US Patentanmeldung / Australische Patentanmeldung / Internationale Patentanmeldung]
T1 - Verwendung von Hydroxydiphenylether-Derivaten als Arylsulfatase-Hemmer in Deodorants und Antitranspirantien
Y1 - 2005
SP - 1
EP - 40
PB - Europäisches Patentamt / USPTO / IP Australia / WIPO
CY - Den Hague / Washington / Canberra/ Genf
ER -
TY - CHAP
A1 - Seiler, Friedrich
A1 - George, Alfred
A1 - Pfaff, Raphael
A1 - Srulijes, Julio
T1 - Stand der Entwicklung des ISL Dopplerbildverfahrens
T2 - GALA : 13. Fachtagung Lasermethoden in der Strömungsmesstechnik : 6. - 8. September 2005, Cottbus
Y1 - 2005
SN - 3-9805613-2-1
SP - 24-1
EP - 24-8
PB - Techn. Univ.
CY - Cottbus
ER -
TY - RPRT
A1 - Pfaff, Raphael
A1 - George, Alfred
A1 - Seiler, Friedrich
A1 - Srulijes, Julio
T1 - Dopplerbild-Verfahren : Entwicklung einer neuen Auswertemethode. (Bericht / ISL / AGARD ; R 124/2005)
Y1 - 2005
PB - ISL
CY - Saint Louis, France
ER -
TY - CHAP
A1 - Plescher, Engelbert
A1 - Mathiak, Gerhard
A1 - Willnecker, Rainer
T1 - Technical aspects of liquid diffusion model experiments
T2 - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1 - 2005
SP - 5019
EP - 5025
PB - International Astronautical Federation
CY - Paris
ER -
TY - JOUR
A1 - Mathiak, Gerhard
A1 - Plescher, Engelbert
A1 - Willnecker, Rainer
T1 - Liquid metal diffusion experiments in microgravity - Vibrational effects
JF - Measurement science and technology
Y1 - 2005
U6 - http://dx.doi.org/10.1088/0957-0233/16/2/003
SN - 0957-0233
VL - Vol. 16
IS - No. 2
SP - 336
ER -
TY - JOUR
A1 - Mathiak, Gerhard
A1 - Willnecker, Rainer
A1 - Plescher, Engelbert
T1 - Vibrational effects on diffusion experiments
JF - Microgravity science and technology : international journal for microgravity research and applications
Y1 - 2005
SN - 0938-0108
VL - Vol. 15
IS - No. 1
SP - 295
EP - 300
ER -
TY - CHAP
A1 - Kloock, Joachim P.
A1 - Moreno, Lia
A1 - Huachupoma, S.
A1 - Xu, J.
A1 - Wagner, Torsten
A1 - Bratov, A.
A1 - Doll, T.
A1 - Vlasov, Y.
A1 - Schöning, Michael Josef
ED - Gerlach, Gerald
T1 - Halbleiterbasierte Schwermetallsensorik auf der Basis von Chalkogenidgläsern für zukünftige „Lab on Chip“-Anwendungen
T2 - 7. Dresdner Sensor-Symposium - Neue Herausforderungen und Anwendungen in der Sensortechnik
Y1 - 2005
SN - 3-938863-29-3
SP - 221
EP - 224
PB - TUDpress, Verl. der Wissenschaften
CY - Dresden
ER -
TY - BOOK
A1 - Merten, Sabine
T1 - Verbesserung der Ausbildung in der Mikrosystemtechnik - virtuelle Labore bereiten auf die Herstellung realer Drucksensoren vor (2 Fassungen: konvertiert und original
N2 - Die Ausbildung in Hochtechnologien wie beispielsweise der Mikrosystemtechnik ist oft durch einen hohen Grad an Komplexität charakterisiert. Damit verbunden sind hohe Kosten für die Errichtung und den Betrieb der speziellen Laborräume und ihre häufig geringe Verfügbarkeit für die Studierenden. Zukünftige Ingenieure sammeln während ihrer Ausbildung aus diesen Gründen nur in beschränktem Umfang praktische Erfahrungen. Die Industrie hingegen fordert Personal mit hoher fachlicher Kompetenz, also fundiertem theoretischen Wissen und umfangreichen praktischen Kenntnissen. Dieser Diskrepanz – qualifizierte Ingenieure auf der einen Seite und eine eher theoretisch ausgerichtete Ausbildung auf der anderen Seite – wird mit einem neuen Blended-Learning-Konzept für MST-Technologiepraktika begegnet. Lernende werden über ein virtuelles Labor, das einen echten Reinraum mit realen Anlagen simuliert, intensiv auf reale Laborpraktika vorbereitet. Dabei geht es im virtuellen Labor gleichermaßen um die Vermittlung von Theorie und Praxis. Nur trainierte Teilnehmer mit einer intensiven Vorbereitung sind in der Lage, relativ eigenständig ein echtes MST-Bauteil innerhalb des anschließenden einwöchigen Laborkurses zu fertigen. Die Wirksamkeit des Konzeptes und die Steigerung des Lernerfolges durch die kombinierten virtuellen und realen Laborkurse wurden im Rahmen der Dissertation begleitend untersucht. Die Ergebnisse flossen direkt in die Weiterentwicklung der Technologiepraktika ein. Die Konzepte und Erkenntnisse sind zudem sehr interessant für die Entwicklung von Blended-Learning-Angeboten in ähnlichen oder anderen Fachgebieten sowie für weitere Bildungseinrichtungen. (Die Dissertation liegt hier in 2 Fassungen vor: Die Originalfassung ist nur bei guter Rechnerausstattung und guter Netzanbindung nutzbar, die konvertierte Fassung ist unverändert, allerdings sind Qualitätseinbußen beim Ausdruck einiger Grafiken möglich)
N2 - Education in high technologies, like e.g. Microsystems technology, is usually characterized by a high degree of complexity. In addition it is usually connected with large economic efforts for invest, operation and maintenance of the special laboratory facilities. The access to such facilities for educational purposes is often quite limited. Therefore engineering students rather rarely gather practical experience in such technologies during their university studies. In contrast, industry has a large demand for engineers with high professional competence, i.e. profound theoretical knowledge combined with substantial practical experience. The newly developed blended learning concept for MST laboratory training tries to bridge the gap between the need for qualified engineers and the more theoretical university education. The learners prepare intensively for real hands-on clean room trainings with a virtual technology laboratory, i.e. a computer simulation of the clean room machines and the corresponding processes. In the virtual technology laboratory the students brush up their theoretical knowledge and at the same time learn to operate the complex clean room machines. Only well trained and intensively prepared students are capable to produce a fully functional MST component within a compact clean room laboratory course of only one week duration and an only modest amount of supervision. The effectivity of this concept and the increase of the learning success due to the specific mixture of virtual and real laboratory sessions has been accompanied and analysed by this dissertation. The results have been used to further improve the laboratory courses. Concepts and results are also very attractive for comparable blended learning proposals in other technical disciplines.
KW - Mikrosystemtechnik
KW - Virtuelles Laboratorium
KW - Lernprogramm
KW - Hochschule / Lehre / Evaluation
KW - Computersimulation
KW - Drucksensor
KW - Blended-Learning
KW - Reinraumpraktikum
KW - blended learning
KW - hands-on cleanroom training
Y1 - 2005
N1 - Zugl.: Saarbrücken, Univ., Diss., 2005
ER -
TY - JOUR
T1 - Fachblatt, Jahrgang 2005; Nr. 2
N2 - Institute 20 Jahre "Summer School Renewable Energy" Personen Prof. Dr.rer.nat. Dr.h.c. Gisela Engeln-Müllges geht in den Ruhestand Fachhochschul-Rektor Prof. Hermann-Josef Buchkremer geht in den Ruhestand Forschung "Badekultur in der Renaissance" Studenten an der Fachhochschule bauen Mini-Satellit Service Start von Cmpus, HIS QIS und neuem Webdesign "Join the best" - MLP bietet neue Chancen auf internationale Spitzenpraktika Forschungsergebnisse werden weltweit sichtbar Menschen an der FH Ein Bild entsteht zuerst im Kopf - die Diplom-Fotografin Jeanne Püttmann FH Aachen als Sprungbrett in luftige Höhen - Silke Lotties Auch mit 100 noch Flugbenzin im Blut! - Aachener Flugpionier Richard Perlia Zwischen Marathon und Studium - Angela Müller Einer der ersten Absolventen des Masterstudiengangs Facility Management - Mike Müller Aus den Fachbereichen Naturwissenschaften zum Anfassen: Lehrer zeigen hohe Motivation DIPLOMA 2005 - Derspringendepunkt Neue "Welten" erleben - Studierende beginnen ihren Auslandsaufenthalt Endlich der Sieg: Bauingenieure erfolgreich in der Wertung Bootskonstruktion Viele Fragen werden am Info-Tag Wirtschaftswissenschaften beantwortet Alumni Erster "Luft- und Raumfahrt" - Absolventenkongress Ein halbes Jahrhundert Bauingenieure Personalinfo Honorarprofessor Dr. Peter Lelkes Prof. Dr.-Ing. Günther Dahl Prof. Klaus Endrikat Prof. Dr.-Ing. Alexander Boeminghaus Prof. Dr. Narendra Bansal jetzt Rektor in Indien
T3 - Fachblatt / FH Aachen - 2005, 2
KW - Fachhochschule Aachen
KW - Fachhochschule Aachen
KW - Aachen University of Applied Sciences
Y1 - 2005
ER -
TY - JOUR
T1 - Fachblatt, Jahrgang 2005; Nr. 1
N2 - Forschung & Lehre FH Aachen: Spitzenplatz in Forschung und Entwicklung Erfolgreiche Weichenstellung für die Zukunft Capro steht nicht bloß für eine Studie Erste Absolventen des MBA-Studiengangs "Entrepreneurship" verabschiedet automotive and aerospace industries Eine Legende lebt - der Porsche 917-024 K 8. Tag der Forschung FH-Service Neues e-journal an der FH Aachen Das neue Online-Tutorial der Bibliothek Die Personalräte der FH Aachen Studieren mit Kind an der FH Aachen Personen Personal-Info Drei Fragen an... Prof. Gerhard Dikta Inna Brauer, eine erfolgreiche FH-Absolventin, startet durch Solar-Institut Jülich Neues aus dem Solar-Institut Jülich Kurz notiert "Merci papa, merci maman" Aus den Fachbereichen Forschung im Weltraum Wie real ist Science-Fiction? Tagung am Institut für Angewandte Polymerchemie
T3 - Fachblatt / FH Aachen - 2005, 1
KW - Fachhochschule Aachen
KW - Aachen University of Applied Sciences
Y1 - 2005
ER -
TY - CHAP
A1 - Gebhardt, Andreas
A1 - Schmidt, Frank-Michael
T1 - Farbige Prototypen als Werkzeug für den Konstrukteur
T1 - Colored prototypes as instrument for the constructing engineer
N2 - Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch für die Büroumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe“ der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have“ oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe“ darüber hinaus?
KW - Prototyping
KW - Rapid prototyping
KW - Prototypen
KW - Funktionsmodelle
KW - Produktentstehung
KW - Prototyper
KW - Produktenwicklung
KW - prototypes
KW - working models
KW - product emergence
KW - prototyper
KW - product development
Y1 - 2005
ER -
TY - CHAP
A1 - Schermutzki, Margret
T1 - Zur Bedeutung der Workload
N2 - Informationen zur Einführung von ECTS zur europäisch einheitlichen Bewertung von Studienleistungen Basierung der ECTS auf der tatsächlichen Arbeitsbelastung der Studierenden Möglichkeiten zur Ermittlung der Arbeitsbelastung
KW - Bologna-Prozess
KW - ECTS
KW - Arbeitsbelastung
KW - Europäisches Leistungspunktesystem
KW - Bewertung von Studienleistungen . Studierendenmobilität
KW - European Credit Transfer System
KW - Workload
Y1 - 2005
ER -
TY - JOUR
A1 - Staat, Manfred
T1 - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels
N2 - Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions.
KW - Finite-Elemente-Methode
KW - Grenzwertberechnung
KW - Axialbelastung
KW - FEM
KW - Grenzwertberechnung
KW - Axialbelastung
KW - Traglastanalyse
KW - Limit analysis
KW - Global and local collapse
KW - Axially cracked pipe
KW - Pressure loaded crack-face
Y1 - 2005
ER -
TY - JOUR
A1 - Staat, Manfred
T1 - Direct finite element route for design-by-analysis of pressure components
N2 - In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.
KW - Einspielen
KW - Plastizität
KW - Deformation
KW - Analytischer Zulaessigkeitsnachweis
KW - Einspiel-Analyse
KW - fortschreitende plastische Deformation
KW - alternierend Verformbarkeit
KW - Einspiel-Kriterium
KW - Design-by-analysis
KW - Shakedown analysis
KW - Progressive plastic deformation
KW - Alternating plasticity
KW - Shakedown criterion
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Werkstoffkunde 3
N2 - Übungsklausur
KW - Werkstoffkunde
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Urformen ; Skript zur Vorlesung
N2 - Urformen aus dem flüssigen oder teigigen Zustand Im Mittelpunkt stehen alle Gießverfahren. Großtechnische Bedeutung haben neben den Metallgießverfahren vor allem auch Verfahren zum Urformen von Kunststoffen und in steigendem Maße auch solche zur Herstellung von Keramiken und Kompositwerkstoffen
KW - Fertigungsverfahren
KW - Urformen
KW - Gießen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Umformen ; Skript zur Vorlesung
N2 - Grundlagen, Druck-Umformen (Walzen, Schmieden, Gesenkschmieden), Zugdruckumformen (Durchziehen, Tiefziehen), Zugumformen, Biegeumformen
KW - Umformverfahren
KW - Druck-Umformen
KW - Zugdruckumformen
KW - Zugumformen
KW - Biegeumformen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Fertigungsverfahren 1
N2 - Übungsklausur
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Regelungstechnik : Skript zur Vorlesung
N2 - Prinzip und Geschichte der Regelungstechnik; technische Steuerungen und Regelungen; Definition und Stellung innerhalb der Automatisierungstechnik. Elementare Übertragungsglieder, Streckentypen, typische Regler (unstetige Regler, stetige Regler), Reglerentwurf (einfache Verfahren, einschließlich Faustformelverfahren). Stabilitätsanalyse von Regelkreisen (einfache Verfahren, ohne Herleitung der Beweise)
KW - Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Digitale Regelungstechnik
N2 - Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel
KW - Digitale Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fuzzy Regelung
N2 - Überblick Fuzzy-Regler, Fuzzy Sets (Scharfe Mengen, Fuzzy Sets, Formen (stückweise linear, gaußförmig, glockenförmig), Eigenschaften (Gleichheit, Teilmenge)), Fuzzy Operatoren (NICHT, UND, ODER) Fuzzyfizierung Inferenzen (Verarbeitungsvorschrift, Ermittlung der aktiven Regeln, Ermittlung der Fuzzy Mengen, Überlagerung) Defuzzyfizierung (Mean-of-Maximum, Center-of-Gravity, Largest-of-Maximum, Smallest-of-Maximum, Center-of-Singletons) Entwurf, Beispiel, Fuzzy Tools, Internet, Literatur
KW - Regelungstechnik
KW - Fuzzy Regelung
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Regelungstechnik
N2 - Übungsklausur
KW - Regelungstechnik
KW - Übungsklausur
Y1 - 2005
ER -