TY  - CHAP
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Schartner, Karl-Heinz
T1  - Flight times to the heliopause using a combination of solar and radioisotope electric propulsion
T2  - 32nd International Electric Propulsion Conference
N2  - We investigate the interplanetary flight of a low-thrust space probe to the heliopause,located at a distance of about 200 AU from the Sun. Our goal was to reach this distance within the 25 years postulated by ESA for such a mission (which is less ambitious than the 15-year goal set by NASA). Contrary to solar sail concepts and combinations of allistic and electrically propelled flight legs, we have investigated whether the set flight time limit could also be kept with a combination of solar-electric propulsion and a second, RTG-powered upper stage. The used ion engine type was the RIT-22 for the first stage and the RIT-10 for the second stage. Trajectory optimization was carried out with the low-thrust optimization program InTrance, which implements the method of Evolutionary Neurocontrol,using Artificial Neural Networks for spacecraft steering and Evolutionary Algorithms to optimize the Neural Networks’ parameter set. Based on a parameter space study, in which the number of thrust units, the unit’s specific impulse, and the relative size of the solar power generator were varied, we have chosen one configuration as reference. The transfer time of this reference configuration was 29.6 years and the fastest one, which is technically
more challenging, still required 28.3 years. As all flight times of this parameter study were longer than 25 years, we further shortened the transfer time by applying a launcher-provided hyperbolic excess energy up to 49 km2/s2. The resulting minimal flight time for the reference configuration was then 27.8 years. The following, more precise optimization to a launch with the European Ariane 5 ECA rocket reduced the transfer time to 27.5 years. This is the fastest mission design of our study that is flexible enough to allow a launch every
year. The inclusion of a fly-by at Jupiter finally resulted in a flight time of 23.8 years,which is below the set transfer-time limit. However, compared to the 27.5-year transfer,this mission design has a significantly reduced launch window and mission flexibility if the
escape direction is restricted to the heliosphere’s “nose".
KW  - low-thrust trajectory optimization
KW  - heliosphere
KW  - ion propulsion
Y1  - 2011
N1  - IEPC-2011-051
32nd International Electric Propulsion Conference,September 11–15, 2011
Wiesbaden, Germany
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Ojovan, Michael I.
A1  - Steinmetz, Hans-Jürgen
T1  - Approaches to Disposal of Nuclear Waste
JF  - Energies
N2  - We present a concise mini overview on the approaches to the disposal of nuclear waste currently used or deployed. The disposal of nuclear waste is the end point of nuclear waste management (NWM) activities and is the emplacement of waste in an appropriate facility without the intention to retrieve it. The IAEA has developed an internationally accepted classification scheme based on the end points of NWM, which is used as guidance. Retention times needed for safe isolation of waste radionuclides are estimated based on the radiotoxicity of nuclear waste. Disposal facilities usually rely on a multi-barrier defence system to isolate the waste from the biosphere, which comprises the natural geological barrier and the engineered barrier system. Disposal facilities could be of a trench type, vaults, tunnels, shafts, boreholes, or mined repositories. A graded approach relates the depth of the disposal facilities’ location with the level of hazard. Disposal practices demonstrate the reliability of nuclear waste disposal with minimal expected impacts on the environment and humans.
KW  - borehole disposal
KW  - geological disposal
KW  - disposal facility
KW  - retention time
KW  - nuclear waste
Y1  - 2022
U6  - https://doi.org/10.3390/en15207804
SN  - 1996-1073
N1  - This article belongs to the Special Issue "Treatment of Radioactive Waste and Sustainability Energy"
VL  - 15
IS  - 20
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Exchange relaxometry of flow at small Péclet numbers in a glass bead pack
JF  - Journal of Magnetic Resonance (JMR)
N2  - In this paper we consider low Péclet number flow in bead packs. A series of relaxation exchange experiments has been conducted and evaluated by ILT analysis. In the resulting correlation maps, we observed a collapse of the signal and a translation towards smaller relaxation times with increasing flow rates, as well as a signal tilt with respect to the diagonal. In the discussion of the phenomena we present a mathematical theory for relaxation exchange experiments that considers both diffusive and advective transport. We perform simulations based on this theory and discuss them with respect to the conducted experiments.
KW  - NMR exchange relaxometry
KW  - Low-field NMR
Y1  - 2012
U6  - https://doi.org/10.1016/j.jmr.2012.04.015
SN  - 1096-0856
VL  - 220
SP  - 32
EP  - 44
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Fluid Transport in Porous Media probed by Relaxation-Exchange NMR
T2  - 2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.
Y1  - 2011
N1  - H12B-07; American Geophysical Union
ER  - 
TY  - CHAP
A1  - Olderog, M.
A1  - Mohr, P.
A1  - Beging, Stefan
A1  - Tsoumpas, C.
A1  - Ziemons, Karl
T1  - Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph
T2  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
N2  - In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50%, while a change of the energy resolution in the absorber layer from 12% to 4.5% results in a reduction of 60%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.
Y1  - 2021
SN  - 978-1-7281-7693-2
U6  - https://doi.org/10.1109/NSS/MIC42677.2020.9507901
N1  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 31 Oct.-7 Nov. 2020, Boston, MA, USA
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Oliveira, Danilo A.
A1  - Molinnus, Denise
A1  - Beging, Stefan
A1  - Siqueira Jr, José R.
A1  - Schöning, Michael Josef
T1  - Biosensor Based on Self-Assembled Films of Graphene Oxide and Polyaniline Using a Field-Effect Device Platform
JF  - physica status solidi (a) applications and materials science
N2  - A new functionalization method to modify capacitive electrolyte–insulator–semiconductor (EIS) structures with nanofilms is presented. Layers of polyallylamine hydrochloride (PAH) and graphene oxide (GO) with the compound polyaniline:poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PANI:PAAMPSA) are deposited onto a p-Si/SiO2 chip using the layer-by-layer technique (LbL). Two different enzymes (urease and penicillinase) are separately immobilized on top of a five-bilayer stack of the PAH:GO/PANI:PAAMPSA-modified EIS chip, forming a biosensor for detection of urea and penicillin, respectively. Electrochemical characterization is performed by constant capacitance (ConCap) measurements, and the film morphology is characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM). An increase in the average sensitivity of the modified biosensors (EIS–nanofilm–enzyme) of around 15% is found in relation to sensors, only carrying the enzyme but without the nanofilm (EIS–enzyme). In this sense, the nanofilm acts as a stable bioreceptor onto the EIS chip improving the output signal in terms of sensitivity and stability.
KW  - capacitive electrolyte–insulator–semiconductor sensors
KW  - graphene oxide
KW  - layer-by-layer technique
KW  - nanomaterials
KW  - polyaniline
Y1  - 2021
U6  - https://doi.org/10.1002/pssa.202000747
SN  - 1862-6319
N1  - Corresponding author: José R. Siqueira Jr & Michael J. Schöning
VL  - 218
IS  - 13
SP  - 1
EP  - 9
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oosterhuis, Koen
A1  - Öhlschläger, Peter
A1  - Berg, Joost H. van den
A1  - Toebes, Mireille
A1  - Gomez, Raquel
A1  - Schumacher, Ton N.
A1  - Haanen, John B.
T1  - Preclinical development of highly effective and safe DNA vaccines directed against HPV 16 E6 and E7
JF  - International Journal of Cancer
Y1  - 2011
SN  - 1097-0215
VL  - 129
IS  - 2
SP  - 397
EP  - 406
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Orzada, S.
A1  - Maderwald, S.
A1  - Poser, B. A.
A1  - Johst, S.
A1  - Kannengiesser, S.
A1  - Ladd, M. E.
A1  - Bitz, Andreas
T1  - Time-interleaved acquisition of modes: an analysis of SAR and image contrast implications
JF  - Magnetic Resonance in Medicine
N2  - s the magnetic field strength and therefore the operational frequency in MRI are increased, the radiofrequency wavelength approaches the size of the human head/body, resulting in wave effects which cause signal decreases and dropouts. Especially, whole-body imaging at 7 T and higher is therefore challenging. Recently, an acquisition scheme called time-interleaved acquisition of modes has been proposed to tackle the inhomogeneity problems in high-field MRI. The basic premise is to excite two (or more) different Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-1 modes using static radiofrequency shimming in an interleaved acquisition, where the complementary radiofrequency patterns of the two modes can be exploited to improve overall signal homogeneity. In this work, the impact of time-interleaved acquisition of mode on image contrast as well as on time-averaged specific absorption rate is addressed in detail. Time-interleaved acquisition of mode is superior in Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-2 homogeneity compared with conventional radiofrequency shimming while being highly specific absorption rate efficient. Time-interleaved acquisition of modes can enable almost homogeneous high-field imaging throughout the entire field of view in PD, T2, and T2*-weighted imaging and, if a specified homogeneity criterion is met, in T1-weighted imaging as well.
Y1  - 2012
U6  - https://doi.org/10.1002/mrm.23081
SN  - 1522-2594
VL  - 67
IS  - 4
SP  - 1033
EP  - 1041
PB  - Wiley-Liss
CY  - New York
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Johst, Sören
A1  - Gratz, Marcel
A1  - Völker, Maximilian N.
A1  - Kraff, Oliver
A1  - Abuelhaija, Ashraf
A1  - Fiedler, Thomas M.
A1  - Solbach, Klaus
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI
JF  - Frontiers in Physics
Y1  - 2017
U6  - https://doi.org/10.3389/fphy.2017.00017
SN  - 2296-424X
N1  - Article number 17
VL  - 5
IS  - Jun
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Schäfer, Lena C.
A1  - Ladd, Susanne C.
A1  - Ladd, Mark E.
A1  - Maderwald, Stefan
T1  - Open design eight-channel transmit/receive coil for high-resolution and real-time ankle imaging at 7 T
JF  - Medical Physics
N2  - Purpose:
At 1.5 T, real-time MRI of joint movement has been shown to be feasible. However, 7 T, provides higher SNR and thus an improved potential for parallel imaging acceleration. The purpose of this work was to build an open, U-shaped eight-channel transmit/receive microstrip coil for 7 T MRI to enable high-resolution and real-time imaging of the moving ankle joint.

Methods:
A U-shaped eight-channel transmit/receive array for the human ankle was built.urn:x-wiley:00942405:mp3399:equation:mp3399-math-0001-parameters and urn:x-wiley:00942405:mp3399:equation:mp3399-math-0002-factor were measured. SAR calculations of different ankle postures were performed to ensure patient safety. Inhomogeneities in the transmit field consequent to the open design were compensated for by the use of static RF shimming. High-resolution and real-time imaging was performed in human volunteers.

Results:
The presented array showed good performance with regard to patient comfort and image quality. High acceleration factors of up to 4 are feasible without visible acceleration artifacts. Reasonable image homogeneity was achieved with RF shimming.

Conclusions:
Open, noncylindrical designs for transmit/receive coils are practical at 7 T and real-time imaging of the moving joint is feasible with the presented coil design.
Y1  - 2011
U6  - https://doi.org/10.1118/1.3553399
SN  - 2473-4209
VL  - 38
IS  - 3
SP  - 1162
EP  - 1167
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Fiedler, Thomas M.
A1  - Bitz, Andreas
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - Local SAR compression with overestimation control to reduce maximum relative SAR overestimation and improve multi-channel RF array performance
JF  - Magnetic Resonance Materials in Physics, Biology and Medicine
N2  - Objective
In local SAR compression algorithms, the overestimation is generally not linearly dependent on actual local SAR. This can lead to large relative overestimation at low actual SAR values, unnecessarily constraining transmit array performance.

Method
Two strategies are proposed to reduce maximum relative overestimation for a given number of VOPs. The first strategy uses an overestimation matrix that roughly approximates actual local SAR; the second strategy uses a small set of pre-calculated VOPs as the overestimation term for the compression.

Result
Comparison with a previous method shows that for a given maximum relative overestimation the number of VOPs can be reduced by around 20% at the cost of a higher absolute overestimation at high actual local SAR values.

Conclusion
The proposed strategies outperform a previously published strategy and can improve the SAR compression where maximum relative overestimation constrains the performance of parallel transmission.
Y1  - 2020
SN  - 1352-8661
U6  - https://doi.org/10.1007/s10334-020-00890-0
IS  - 34 (2021)
SP  - 153
EP  - 164
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Johst, Sören
A1  - Maderwald, Stefan
A1  - Bitz, Andreas
A1  - Solbach, Klaus
A1  - Ladd, Mark E.
T1  - Mitigation of B1(+) inhomogeneity on single-channel transmit systems with TIAMO
JF  - Magnetic Resonance in Medicine
Y1  - 2013
U6  - https://doi.org/10.1002/mrm.24453
SN  - 1522-2594
VL  - 70
IS  - 1
SP  - 290
EP  - 294
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Ladd, Mark E.
A1  - Bitz, Andreas
T1  - A method to approximate maximum local SAR in multichannel transmit MR systems without transmit phase information
JF  - Magnetic Resonance in Medicine
N2  - Purpose
To calculate local specific absorption rate (SAR) correctly, both the amplitude and phase of the signal in each transmit channel have to be known. In this work, we propose a method to derive a conservative upper bound for the local SAR, with a reasonable safety margin without knowledge of the transmit phases of the channels.

Methods
The proposed method uses virtual observation points (VOPs). Correction factors are calculated for each set of VOPs that prevent underestimation of local SAR when the VOPs are applied with the correct amplitudes but fixed phases.

Results
The proposed method proved to be superior to the worst-case calculation based on the maximum eigenvalue of the VOPs. The mean overestimation for six coil setups could be reduced, whereas no underestimation of the maximum local SAR occurred. In the best investigated case, the overestimation could be reduced from a factor of 3.3 to a factor of 1.7.

Conclusion
The upper bound for the local SAR calculated with the proposed method allows a fast estimation of the local SAR based on power measurements in the transmit channels and facilitates SAR monitoring in systems that do not have the capability to monitor transmit phases
Y1  - 2016
U6  - https://doi.org/10.1002/mrm.26398
SN  - 1522-2594
VL  - 78
IS  - 2
SP  - 805
EP  - 811
PB  - International Society for Magnetic Resonance in Medicine
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Maderwald, Stefan
A1  - Poser, Benedikt Andreas
A1  - Bitz, Andreas
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - RF excitation using time interleaved acquisition of modes (TIAMO) to address B1 inhomogeneity in high-field MRI
JF  - Magnetic Resonance in Medicine
N2  - As the field strength and, therefore, the operational frequency in MRI is increased, the wavelength approaches the size of the human head/body, resulting in wave effects, which cause signal decreases and dropouts. Several multichannel approaches have been proposed to try to tackle these problems, including RF shimming, where each element in an array is driven by its own amplifier and modulated with a certain (constant) amplitude and phase relative to the other elements, and Transmit SENSE, where spatially tailored RF pulses are used. In this article, a relatively inexpensive and easy to use imaging scheme for 7 Tesla imaging is proposed to mitigate signal voids due to B1 field inhomogeneity. Two time-interleaved images are acquired using a different excitation mode for each. By forming virtual receive elements, both images are reconstructed together using GRAPPA to achieve a more homogeneous image, with only small SNR and SAR penalty in head and body imaging at 7 Tesla.
Y1  - 2010
U6  - https://doi.org/10.1002/mrm.22527
SN  - 1522-2594
VL  - 64
IS  - 2
SP  - 327
EP  - 333
PB  - Wiley-Liss
CY  - New York
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Solbach, Klaus
A1  - Gratz, Marcel
A1  - Brunheim, Sascha
A1  - Fiedler, Thomas M.
A1  - Johst, Sören
A1  - Bitz, Andreas
A1  - Shooshtary, Samaneh
A1  - Abuelhaija, Ashraf
A1  - Voelker, Maximilian N.
A1  - Rietsch, Stefan H. G.
A1  - Kraff, Oliver
A1  - Maderwald, Stefan
A1  - Flöser, Martina
A1  - Oehmingen, Mark
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - A 32-channel parallel transmit system add-on for 7T MRI
JF  - Plos one
Y1  - 2019
U6  - https://doi.org/10.1371/journal.pone.0222452
ER  - 
TY  - CHAP
A1  - Osterhage, Hannes
A1  - Bialonski, Stephan
A1  - Staniek, Matthäus
A1  - Schindler, Kaspar
A1  - Wagner, Tobias
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - Bivariate and multivariate time series analysis techniques and their potential impact for seizure prediction
T2  - Seizure Prediction in Epilepsy: From Basic Mechanisms to Clinical Applications
Y1  - 2008
SN  - 978-3-527-62519-2
U6  - https://doi.org/10.1002/9783527625192.ch15
SP  - 189
EP  - 208
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Ostkotte, Sebastian
A1  - Peters, Constantin
A1  - Hüning, Felix
A1  - Bragard, Michael
T1  - Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect
T2  - 2022 ELEKTRO (ELEKTRO)
N2  - This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation.
Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.
KW  - Position Encoder
KW  - Rotational Encoder
KW  - Wiegand Effect
KW  - Angle Sensor
KW  - Incremental Encoder
Y1  - 2022
SN  - 978-1-6654-6726-1
SN  - 978-1-6654-6727-8
U6  - https://doi.org/10.1109/ELEKTRO53996.2022.9803477
SN  - 2691-0616
N1  - 2022 ELEKTRO (ELEKTRO), 23-26 Mai 2022, Krakow, Poland.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmid, M.
A1  - Weber, Tobias
T1  - Advances In Sheet Metal-Forming: Reduction Of Tooling Cost By Methodical Optimization
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmidt, M.
A1  - Weber, Tobias
T1  - Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations
T2  - SAMPE Europe Conference 16 Liege
Y1  - 2016
SN  - 978-1-5108-3800-0
SP  - 570
EP  - 577
ER  - 
TY  - JOUR
A1  - Otten, Dennis
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation – On Its Way to Industrial Application
JF  - International Journal of Aviation, Aeronautics, and Aerospace
N2  - Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale.
Y1  - 2018
U6  - https://doi.org/10.15394/ijaaa.2018.1217
SN  - 2374-6793
VL  - 5
IS  - 2
PB  - Embry-Riddle Aeronautical University
CY  - Daytona Beach, Fla.
ER  - 
TY  - JOUR
A1  - Overduin, James
A1  - Blome, Hans-Joachim
A1  - Hoell, Josef
T1  - Wolfgang Priester: from the big bounce to the Lambda-dominated universe
JF  - Naturwissenschaften
Y1  - 2007
SN  - 0028-1042
VL  - 94
IS  - 6
SP  - 417
EP  - 429
ER  - 
TY  - JOUR
A1  - Oßmann, Martin
A1  - Hattrup, C.
A1  - Broeck, H. W. van der
T1  - Fast estimation techniques for digital control of resonant converters / Hattrup, C.; van der Broeck, H.W.; Ossmann, M.;
JF  - IEEE Transaction on Power Electronics. 18 (2003), H. 1
Y1  - 2003
SN  - 0885-8993
N1  - Part 2
SP  - 365
EP  - 372
ER  - 
TY  - JOUR
A1  - Oßmann, Martin
A1  - Kazay, B.
T1  - Simple circuit provides high-side current sensing / Ossmann, M ; Kazay, B.
JF  - EDN. 45 (2000), H. 21
Y1  - 2000
SN  - 0012-7515
SP  - 200
EP  - 200
ER  - 
TY  - JOUR
A1  - Oßmann, Martin
A1  - Kazay, B.
T1  - Single mu C pin makes half-duplex RS-232C / Ossmann, M
JF  - EDN. 44 (1999), H. 16
Y1  - 1999
SN  - 0012-7515
SP  - 118
ER  - 
TY  - JOUR
A1  - Paczkowski, Sebastian
A1  - Weißbecker, Bernhard
A1  - Schöning, Michael Josef
A1  - Schütz, Stefan
T1  - Biosensors on the Basis of Insect Olfaction
JF  - Insect biotechnology / Andreas Vilcinskas, ed.
Y1  - 2011
SN  - 978-90-481-9640-1
N1  - Biologically-inspired system ; 2
SP  - 225
EP  - 240
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Palmer, J. W.
A1  - Lindemann, Markus
T1  - Business models and market mechanisms : evaluating efficiency in consumer electronic markets
JF  - Data base and advanced information systems. Bd. 34 (2003), H. 2
Y1  - 2003
SN  - 0105-9912
SP  - 23
EP  - 38
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - JOUR
A1  - Parl, C.
A1  - Larue, H.
A1  - Streun, M.
A1  - Ziemons, Karl
T1  - Double-side-readout technique for SiPM-matrices
JF  - 2010 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - In our case the double-side-method is used to minimize the complexity of a matrix-readout. Here the number of channels is reduced to 2√N̅. It is also possible to benefit from the method in a single pixel readout system. One signal can be used to measure position and energy of the event, the other one can be applied to a fast trigger-circuit at the same time. In a next step we will investigate timing behavior and electrical crosstalk of the circuit.
Y1  - 2011
SN  - 1095-7863
SP  - 1486
EP  - 1487
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Pasteur, Aline
A1  - Tippkötter, Nils
A1  - Kampeis, Percy
A1  - Ulber, Roland
T1  - Optimization of high gradient magnetic separation filter units for the purification of fermentation products
JF  - IEEE TRANSACTIONS ON MAGNETICS
N2  - High gradient magnetic separation (HGMS) has been established since the early 1970s. A more recent application of these systems is the use in bioprocesses. To integrate the HGMS in a fermentation process, it is necessary to optimize the separation matrix with regard to the magnetic separation characteristics and permeability of the non-magnetizable components of the fermentation broth. As part of the work presented here, a combined fluidic and magnetic force finite element model simulation was created using the software COMSOL Multiphysics and compared with separation experiments. Finally, as optimal lattice orientation of the separation matrix, a transversal rhombohedral arrangement was defined. The high suitability of the new filter matrix has been verified by separation experiments.
Y1  - 2014
U6  - https://doi.org/10.1109/TMAG.2014.2325535
SN  - 0018-9464
N1  - Article Sequence Number: 5000607
INSPEC Accession Number: 14663042
VL  - 50
IS  - 10
SP  - Artikel 5000607
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Paulsen, Svea
A1  - Hoffstadt, Kevin
A1  - Krafft, Simone
A1  - Leite, A.
A1  - Zang, J.
A1  - Fonseca-Zang, W.
A1  - Kuperjans, Isabel
T1  - Continuous biogas production from sugarcane as sole substrate
T2  - Energy Reports
N2  - A German–Brazilian research project investigates sugarcane as an energy plant in anaerobic digestion for biogas production. The aim of the project is a continuous, efficient, and stable biogas process with sugarcane as the substrate. Tests are carried out in a fermenter with a volume of 10 l.

In order to optimize the space–time load to achieve a stable process, a continuous process in laboratory scale has been devised. The daily feed in quantity and the harvest time of the substrate sugarcane has been varied. Analyses of the digester content were conducted twice per week to monitor the process: The ratio of inorganic carbon content to volatile organic acid content (VFA/TAC), the concentration of short-chain fatty acids, the organic dry matter, the pH value, and the total nitrogen, phosphate, and ammonium concentrations were monitored. In addition, the gas quality (the percentages of CO₂, CH₄, and H₂) and the quantity of the produced gas were analyzed.

The investigations have exhibited feasible and economical production of biogas in a continuous process with energy cane as substrate. With a daily feeding rate of 1.68gᵥₛ/l*d the average specific gas formation rate was 0.5 m3/kgᵥₛ. The long-term study demonstrates a surprisingly fast metabolism of short-chain fatty acids. This indicates a stable and less susceptible process compared to other substrates.
Y1  - 2020
U6  - https://doi.org/10.1016/j.egyr.2019.08.035
N1  - 6th International Conference on Energy and Environment Research, ICEER 2019, 22–25 July, University of Aveiro, Portugal
VL  - 6
IS  - Supplement 1
SP  - 153
EP  - 158
PB  - Elsevier
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Alberto, Roger
A1  - Abram, Ulrich
T1  - Synthesis, Characterization, and Structures of R3EOTcO3 Complexes (E = C, Si, Ge, Sn, Pb) and Related Compounds
JF  - Inorganic Chemistry
N2  - AgTcO4 reacts with R3ECl compounds (E = C, Si, Ge, Sn, Pb; R = Me, iPr, tBu, Ph), tBu2SnCl2, or PhMgCl under formation of novel trioxotechnetium(VII) derivatives. The carbon and silicon derivatives readily undergo decomposition, which was proven by 99Tc NMR spectroscopy and the isolation of decomposition products such as [TcOCl3(THF)(OH2)]. Compounds [Ph3GeOTcO3], [(THF)Ph3SnOTcO3], [(O3TcO)SntBu2(OH)]2, and [(THF)4Mg(OTcO3)2] are more stable and were isolated in crystalline form and characterized by X-ray diffraction.
Y1  - 2010
U6  - https://doi.org/10.1021/ic1001094
SN  - 1520-510X
VL  - 49
IS  - 7
SP  - 3525
EP  - 3530
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Hoehr, Cornelia
A1  - Hou, Xinchi
A1  - Hanemaayer, Victoire
A1  - Zeisler, Stefan
A1  - Adam, Michael J.
A1  - Ruth, Thomas J.
A1  - Celler, Anna
A1  - Buckley, Ken
A1  - Benard, Francois
A1  - Schaffer, Paul
T1  - Production of Y-86 and other radiometals for research purposes using a solution target system
JF  - Nuclear medicine and biology
Y1  - 2015
U6  - https://doi.org/10.1016/j.nucmedbio.2015.06.005
SN  - 1872-9614
VL  - 42
IS  - 11
SP  - 842
EP  - 849
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Kong, Shushu
A1  - Arciszewski, Pawel
A1  - Wielbalck, Swantje
A1  - Abram, Ulrich
T1  - Aryl and NHC Compounds of Technetium and Rhenium
JF  - Journal of the American Chemical Society
N2  - Air- and water-stable phenyl complexes with nitridotechnetium(V) cores can be prepared by straightforward procedures. [TcNPh2(PPh3)2] is formed by the reaction of [TcNCl2(PPh3)2] with PhLi. The analogous N-heterocyclic carbene (NHC) compound [TcNPh2(HLPh)2], where HLPh is 1,3,4-triphenyl-1,2,4-triazol-5-ylidene, is available from (NBu4)[TcNCl4] and HLPh or its methoxo-protected form. The latter compound allows the comparison of different Tc–C bonds within one compound. Surprisingly, the Tc chemistry with such NHCs does not resemble that of corresponding Re complexes, where CH activation and orthometalation dominate.
Y1  - 2012
U6  - https://doi.org/10.1021/ja3033718
SN  - 1520-5126
VL  - 134
IS  - 22
SP  - 9118
EP  - 9121
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Kückmann, Theresa
A1  - Abram, Ulrich
T1  - Silver(I) Complexes of 1,3-Dialkyl-4,5-dimethylimidazol-2-ylidenes and their Use as Precursors for the Synthesis of Rhenium(V) NHC Complexes
JF  - Zeitschrift für anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry
Y1  - 2007
U6  - https://doi.org/10.1002/zaac.200700021
SN  - 1521-3749
VL  - 633
IS  - 5-6
SP  - 830
EP  - 834
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Le, Van So
A1  - Lengkeek, Nigel
A1  - Pellegrini, Paul
A1  - Jackson, Tim
A1  - Greguric, Ivan
A1  - Weiner, Ron
T1  - Influence of Metal Ions on the 68Ga-labeling of DOTATATE
JF  - Applied Radiation and Isotopes
Y1  - 2013
U6  - https://doi.org/10.1016/j.apradiso.2013.08.010
SN  - 1872-9800
VL  - 82
SP  - 232
EP  - 238
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Lengkeek, Nigel A.
A1  - Le, Van So
A1  - Pellegrini, Paul A.
A1  - Greguric, Ivan
A1  - Weiner, Ron
T1  - The role of additives in moderating the influence of Fe(III) and Cu(II) on the radiochemical yield of [⁶⁸Ga(DOTATATE)]
JF  - Applied Radiation and Isotopes
N2  - [⁶⁸Ga(DOTATATE)] has demonstrated its clinical usefulness. Both Fe³⁺ and Cu²⁺, potential contaminants in Gallium-68 generator eluent, substantially reduce the radiochemical (RC) yield of [⁶⁸Ga(DOTATATE)] if the metal/ligand ratio of 1:1 is exceeded. A variety of compounds were examined for their potential ability to reduce this effect. Most had no effect on RC yield. However, addition of phosphate diminished the influence of Fe³⁺ by likely forming an insoluble iron salt. Addition of ascorbic acid reduced Cu²⁺ and Fe³⁺ to Cu⁺ and Fe²⁺ respectively, both of which have limited impact on RC yields. At low ligand amounts (5 nmol DOTATATE), the addition of 30 nmol phosphate (0.19 mM) increased the tolerance of Fe3⁺ from 4 nmol to 10 nmol (0.06 mM), while the addition of ascorbic acid allowed high RC yields (>95%) in the presence of 40 nmol Fe³⁺ (0.25 mM) and 100 nmol Cu²⁺ (0.63 mM). The effect of ascorbic acid was highly pH-dependant, and gave optimal results at pH 3.
Y1  - 2016
U6  - https://doi.org/10.1016/j.apradiso.2015.09.008
SN  - 1872-9800
VL  - 107
SP  - 13
EP  - 16
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Ngyugen, Hung Huy
A1  - Kahlcke, Nils
A1  - Deflon, Victor M.
A1  - Abram, Ulrich
T1  - Tricarbonyltechnetium(I) and -rhenium(I) complexes with N′-thiocarbamoylpicolylbenzamidines
JF  - Polyhedron
N2  - N,N-Dialkylamino(thiocarbonyl)-N′-picolylbenzamidines react with (NEt4)2[M(CO)3X3] (M = Re, X = Br; M = Tc, X = Cl) under formation of neutral [M(CO)3L] complexes in high yields. The monoanionic NNS ligands bind in a facial coordination mode and can readily be modified at the (CS)NR1R2 moiety. The complexes [99Tc(CO)3(LPyMor)] and [Re(CO)3(L)] (L = LPyMor, LPyEt) were characterized by X-ray diffraction. Reactions of [99mTc(CO)3(H2O)3]+ with the N′-thiocarbamoylpicolylbenzamidines give the corresponding 99mTc complexes. The ester group in HLPyCOOEt allows linkage between biomolecules and the metal core.
Y1  - 2012
U6  - https://doi.org/10.1016/j.poly.2012.04.008
SN  - 0277-5387
VL  - 40
IS  - 1
SP  - 153
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Schweighöfer, Philip V.
A1  - Abram, Ulrich
T1  - Reactions of [ReOX3(PPh3)2] Complexes (X = Cl, Br) with Phenylacetylene and the Structures of the Products
JF  - Zeitschrift für anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry
N2  - Oxorhenium(V) complexes [ReOX3(PPh3)2] (X = Cl, Br) react with phenylacetylene under formation of complexes with ylide-type ligands. Compounds of the compositions [ReOCl3(PPh3){C(Ph)C(H)(PPh3)}] (1), [ReOBr3(OPPh3){C(Ph)C(H)(PPh3)}] (2), and [ReOBr3(OPPh3){C(H)C(Ph)(PPh3)}] (3) were isolated and characterized by X-ray diffraction. They contain a ligand, which was formed by a nucleophilic attack of released PPh3 at coordinated phenylacetylene. The structures of the products show that there is no preferable position for this attack. Cleavage of the Re–C bond in 3 and dimerization of the organic ligand resulted in the formation of the [{(PPh3)(H)CC(Ph)}2]2+ cation, which crystallized as its [(ReOBr4)(OReO3)]2– salt.
Y1  - 2010
U6  - https://doi.org/10.1002/zaac.200900478
SN  - 1521-3749
VL  - 636
IS  - 5
SP  - 779
EP  - 783
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
T1  - Weak smoothness conditions for the uniform convergence of Fourier-Jacobi series
JF  - Functiones et Approximatio. Commentarii Mathematici. 9 (1980)
Y1  - 1980
SN  - 0208-6573
N1  - Zentralblatt MATH:  http://www.emis.de/MATH-item?0471.42018
SP  - 9
EP  - 13
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
T1  - Note on Jackson and Bernstein type approximation theorems in the case of approximation by algebraic polynomial in the spaces L and C
JF  - Studia Scientiarum Mathematicarum Hungarica. 36 (2000), H. 3-4
Y1  - 2000
SN  - 0081-6906
SP  - 353
EP  - 358
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Butzer, Paul L.
T1  - Semi-groups and resolvent operators
JF  - Archive for Rational Mechanics and Analysis
KW  - Resolvent Operator
KW  - Electromagnetism
KW  - Complex System
KW  - Neural Network
KW  - Nonlinear Dynamics
Y1  - 1968
U6  - https://doi.org/10.1007/BF00250941
SN  - 0003-9527
VL  - 30
IS  - 2
SP  - 127
EP  - 147
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Schmitt, W.
A1  - Meissen, Th.
T1  - Aachen 3D finger. 3D digitizer for application in dentistry / Schmitt, W. ; Pawelke, S. ; Meissen, Th.
JF  - Biomedizinische Technik. 35 (1990), H. 4
Y1  - 1990
SN  - 0013-5585
SP  - 69
EP  - 71
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Platt, Werner
T1  - A new approach to describe the mechanical performance of flexible couplings in drive systems
T2  - Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo
Y1  - 1986
N1  - International Conference on Rotordynamics <1986, Tōkyō>
SP  - 159
EP  - 163
PB  - IFToMM
CY  - Tokyo
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Schmidt, J.
A1  - Rosenkranz, Josef
T1  - Principles of machine noise reduction
T2  - Inter-noise 85 : proceedings ; 1985 international conference on noise control engineering ; Munich, Sept. 18 - 20, 1985. - (Schriftenreihe der Bundesanstalt für Arbeitsschutz : Tagungsbericht ; 39)
Y1  - 1985
SN  - 3-88314-417-7
SP  - 23
EP  - 36
PB  - Bundesanstalt für Arbeitsschutz [u.a.]
CY  - Dortmund [u.a.]
ER  - 
TY  - JOUR
A1  - Peere, Wouter
A1  - Blanke, Tobias
ED  - Vernon, Chris
T1  - GHEtool: An open-source tool for borefield sizing in Python
JF  - Journal of Open Source Software
N2  - GHEtool is a Python package that contains all the functionalities needed to deal with borefield design. It is developed for both researchers and practitioners. The core of this package is the automated sizing of borefield under different conditions. The sizing of a borefield is typically slow due to the high complexity of the mathematical background. Because this tool has a lot of precalculated data, GHEtool can size a borefield in the order of tenths of milliseconds. This sizing typically takes the order of minutes. Therefore, this tool is suited for being implemented in typical workflows where iterations are required. 

GHEtool also comes with a graphical user interface (GUI). This GUI is prebuilt as an exe-file because this provides access to all the functionalities without coding. A setup to install the GUI at the user-defined place is also implemented and available at: https://www.mech.kuleuven.be/en/tme/research/thermal_systems/tools/ghetool.
KW  - geothermal
KW  - energy
KW  - borefields
KW  - sizing
Y1  - 2022
U6  - https://doi.org/10.21105/joss.04406
SN  - 2475-9066
VL  - 7
IS  - 76
SP  - 1
EP  - 4, 4406
ER  - 
TY  - JOUR
A1  - Pellegrini, Paul A.
A1  - Howell, Nicholas R.
A1  - Shepherd, Rachael K.
A1  - Lengkeek, Nigel A.
A1  - Paulßen, Elisabeth
A1  - Katsifis, Andrew G.
A1  - Greguric, Ivan
T1  - Synthesis and Radiolabelling of DOTA-Linked Glutamine Analogues with 67,68Ga as Markers for Increased Glutamine Metabolism in Tumour Cells
JF  - Molecules
Y1  - 2013
U6  - https://doi.org/10.3390/molecules18067160
SN  - 1420-3049
VL  - 18
IS  - 6
SP  - 7160
EP  - 7178
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Peloni, A.
A1  - Ceriotti, M.
A1  - Dachwald, Bernd
T1  - Preliminary trajectory design of a multiple NEO rendezvous mission through solar sailing
T2  - Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014
Y1  - 2015
SN  - 978-1-63439-986-9
SP  - 5352
EP  - 5366
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Peloni, Alessandro
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
T1  - Solar-sail trajectory design for a multiple near-earth-asteroid rendezvous mission
JF  - Journal of Guidance, Control, and Dynamics
N2  - The scientific interest for near-Earth asteroids as well as the interest in potentially hazardous asteroids from the perspective of planetary defense led the space community to focus on near-Earth asteroid mission studies. A multiple near-Earth asteroid rendezvous mission with close-up observations of several objects can help to improve the characterization of these asteroids. This work explores the design of a solar-sail spacecraft for such a mission, focusing on the search of possible sequences of encounters and the trajectory optimization. This is done in two sequential steps: a sequence search by means of a simplified trajectory model and a set of heuristic rules based on astrodynamics, and a subsequent optimization phase. A shape-based approach for solar sailing has been developed and is used for the first phase. The effectiveness of the proposed approach is demonstrated through a fully optimized multiple near-Earth asteroid rendezvous mission. The results show that it is possible to visit five near-Earth asteroids within 10 years with near-term solar-sail technology.
Y1  - 2016
U6  - https://doi.org/10.2514/1.G000470
SN  - 0731-5090
VL  - 39
IS  - 12
SP  - 2712
EP  - 2724
PB  - AIAA
CY  - Reston, Va.
ER  -