TY  - JOUR
A1  - Zabirov, Alexander
A1  - Schleser, Markus
A1  - Bucherer, Sebastian
T1  - Füge- und Dichtkonzept für einen Leichtbauverbrennungsmotor
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2021
U6  - https://doi.org/10.1007/s35145-021-0531-5
SN  - 2192-8681
VL  - 65
IS  - 11
SP  - 12
EP  - 19
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Dowey, Steve
A1  - Wollert, Jörg
T1  - Performance evaluation of skill-based order-assignment in production environments with multi-agent systems
JF  - IEEE Journal of Emerging and Selected Topics in Industrial Electronics
N2  - The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.
KW  - cyber-physical production systems
KW  - event-based simulation
KW  - multi-agent systems
KW  - digital factory
KW  - industrial agents
Y1  - 2021
U6  - https://doi.org/10.1109/JESTIE.2021.3108524
SN  - 2687-9735
IS  - Early Access
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Thomas, Axel
T1  - Genussrechte als Instrument der Unternehmensfinanzierung von kommunalen Wohnungs- baugesellschaften
JF  - VM Verwaltung und Management
N2  - Die kommunalen Wohnungsbaugesellschaften und ihr Geschäftszweck bzw. Versorgungsauftrag erfahren aus gesamtgesellschaftlichen Gründen aktuell einen erheblichen Bedeutungszuwachs. Der kommunale Wohnungsbau soll und muss intensiviert werden, da z.B. zunehmend Wohnungsbindungen auslaufen. Bezahlbare Neubauten fehlen speziell Familien, Senioren, Studenten und Flüchtlingen. Um das Investitionsvolumen zu bewältigen, bedarf es nicht nur der Förderkredite, sondern auch der Zuführung „frischen Kapitals“. Der Beitrag stellt  dar, dass Genussrechte ein interessantes und oft unbekanntes Finanzierungsinstrument für kommunale Wohnungsbaugesellschaften mit passgenauen Ausgestaltungsmöglichkeiten sind. Mit Hilfe von Genussrechten können die notwendigen Neubau-Investitionen solide mit Quasi-Eigenkapital unterlegt werden und den sozialen Wohnungsbau wiederbeleben. Genussrechte als Hybridkapital lassen  sich mangels gesetzlicher Eingrenzung exakt und individuell ebenso an die Bedürfnisse der kommunalen Wohnungsbaugesellschaft anpassen wie an die der Gesellschafter und des jeweiligen Neubauvorhabens.
Y1  - 2016
U6  - https://doi.org/10.5771/0947-9856-2016-6-322
SN  - 0947-9856
VL  - 22
IS  - 6
SP  - 322
EP  - 327
PB  - Nomos
CY  - Baden-Baden
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Pfaff, Raphael
T1  - Güterwagen 4.0 - Der Güterwagen für das Internet der Dinge. Teil 1: Gesamtsystembetrachtung und grundlegendes Konzept
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2017
SN  - 0013-2845
VL  - 66
IS  - 1/2
SP  - 12
EP  - 16
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Enning, Manfred
T1  - Vom "König der Landstraße" zur "Ameise 4.0"
JF  - ETR - Eisenbahntechnische Rundschau
N2  - Auf Eisenbahn- und Logistikkonferenzen werden gelegentlich Videos von Blattschneiderameisen gezeigt, die effizient und selbstorganisiert große Mengen Material durch den Dschungel transportieren. Daran sollen wir uns ein Beispiel nehmen.
Y1  - 2017
SN  - 0013-2845
VL  - 66
IS  - 1/2
SP  - 3
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Kampker, Achim
A1  - Schleser, Markus
A1  - Triebs, Johannes
A1  - Berg, Alexander-Karl
A1  - Hansen, Jan Ole
A1  - Fiedler, Falko
T1  - Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK
JF  - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
N2  - Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kostengünstige und effiziente Lösungsansätze für Prozessketten im Zukunftsfeld der Elektromobilität. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden.
Y1  - 2018
U6  - https://doi.org/10.3139/104.112012
SN  - 0947-0085
VL  - 113
IS  - 11
SP  - 767
EP  - 770
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Engemann, Heiko
A1  - Du, Shengzhi
A1  - Kallweit, Stephan
A1  - Cönen, Patrick
A1  - Dawar, Harshal
T1  - OMNIVIL - an autonomous mobile manipulator for flexible production
JF  - Sensors
Y1  - 2020
SN  - 1424-8220
U6  - https://doi.org/10.3390/s20247249
N1  - Special issue: Sensor Networks Applications in Robotics and Mobile Systems
VL  - 20
IS  - 24, art. no. 7249
SP  - 1
EP  - 30
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
T1  - Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach
JF  - Railway Engineering Science
N2  - The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes.
KW  - Freight rail
KW  - Shunting
KW  - Braking curves
KW  - Brake set-up
KW  - Driver assistance system
Y1  - 2023
U6  - https://doi.org/10.1007/s40534-023-00303-7
SN  - 2662-4753 (eISSN)
SN  - 2662-4745 (Print)
VL  - 31
IS  - 2
SP  - 135
EP  - 144
PB  - SpringerOpen
ER  - 
TY  - JOUR
A1  - Ulmer, Jessica
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Dowey, Steve
A1  - Wollert, Jörg
T1  - A human factors-aware assistance system in manufacturing based on gamification and hardware modularisation
JF  - International Journal of Production Research
N2  - Assistance systems have been widely adopted in the manufacturing sector to facilitate various processes and tasks in production environments. However, existing systems are mostly equipped with rigid functional logic and do not provide individual user experiences or adapt to their capabilities. This work integrates human factors in assistance systems by adjusting the hardware and instruction presented to the workers’ cognitive and physical demands. A modular system architecture is designed accordingly, which allows a flexible component exchange according to the user and the work task. Gamification, the use of game elements in non-gaming contexts, has been further adopted in this work to provide level-based instructions and personalised feedback. The developed framework is validated by applying it to a manual workstation for industrial assembly routines.
KW  - Human factors
KW  - assistance system
KW  - gamification
KW  - adaptive systems
KW  - manufacturing
Y1  - 2023
U6  - https://doi.org/10.1080/00207543.2023.2166140
SN  - 0020-7543 (Print)
SN  - 1366-588X (Online)
PB  - Taylor & Francis
ER  - 
TY  - JOUR
A1  - Raffeis, Iris
A1  - Adjei-Kyeremeh, Frank
A1  - Vroomen, Uwe
A1  - Westhoff, Elmar
A1  - Bremen, Sebastian
A1  - Hohoi, Alexandru
A1  - Bührig-Polaczek, Andreas
T1  - Qualification of a Ni-Cu alloy for the laser powder bed fusion process (LPBF): Its microstructure and mechanical properties
JF  - Applied Sciences
N2  - As researchers continue to seek the expansion of the material base for additive manufacturing, there is a need to focus attention on the Ni–Cu group of alloys which conventionally has wide industrial applications. In this work, the G-NiCu30Nb casting alloy, a variant of the Monel family of alloys with Nb and high Si content is, for the first time, processed via the laser powder bed fusion process (LPBF). Being novel to the LPBF processes, optimum LPBF parameters were determined, and hardness and tensile tests were performed in as-built conditions and after heat treatment at 1000 °C. Microstructures of the as-cast and the as-built condition were compared. Highly dense samples (99.8% density) were achieved after varying hatch distance (80 µm and 140 µm) with scanning speed (550 mm/s–1500 mm/s). There was no significant difference in microhardness between varied hatch distance print sets. Microhardness of the as-built condition (247 HV0.2) exceeded the as-cast microhardness (179 HV0.2.). Tensile specimens built in vertical (V) and horizontal (H) orientations revealed degrees of anisotropy and were superior to conventionally reported figures. Post heat treatment increased ductility from 20% to 31% (V), as well as from 16% to 25% (H), while ultimate tensile strength (UTS) and yield strength (YS) were considerably reduced.
Y1  - 2020
U6  - https://doi.org/10.3390/app10103401
SN  - 2076-3417
N1  - Special Issue Materials Development by Additive Manufacturing Techniques
VL  - 10
IS  - Art. 3401
SP  - 1
EP  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Engeln-Müllges, Gisela
T1  - Entartungsbedingungen für Gleitflächennomogramme und Nomographierbarkeitsbedingungen für Fluchtebenennomogramme
JF  - ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
Y1  - 1982
U6  - https://doi.org/10.1002/zamm.19820620203
SN  - 1521-4001
VL  - 62
IS  - 2
SP  - 77
EP  - 93
ER  - 
TY  - JOUR
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
A1  - Jahn, Simon
A1  - Eichler, Fabian
A1  - Thurn, Laura
A1  - Bremen, Sebastian
T1  - Lösungsansätze und Verfahrenskonzepte zum Laserstrahlschmelzen von Glas
JF  - Schweissen und Schneiden
Y1  - 2021
SN  - 0036-7184
VL  - 73
IS  - Heft 1-2
SP  - 32
EP  - 39
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Термогидродинамический расчет упорных подшипников с круговыми подушками на масляной пленке, содержащей пузырьки газа
JF  - Проблемы трения и смазки
Y1  - 1985
N1  - Russ. Parallelausg. zum gleichzeitig ersch. Titel in der Zeitschr. "Journal of Tribology", 107(1985), 4
VL  - 107
IS  - 4
SP  - 94
EP  - 102
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1973
SN  - 0040-148X
VL  - 65
IS  - 48
SP  - 13
EP  - 15
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Luft, Angela
A1  - Luft, Nils
A1  - Arntz, Kristian
T1  - A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0
JF  - Applied Sciences
N2  - Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems’ fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.
KW  - manufacturing data model
KW  - production planning and control
KW  - manufacturing flexibility
KW  - technology planning
KW  - SOA
KW  - service-oriented architectures
KW  - factory planning
Y1  - 2023
U6  - https://doi.org/10.3390/app13137610
SN  - 2076-3417
N1  - This article belongs to the Special Issue "Smart Industrial System"
VL  - 2023
IS  - 13
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1974
SN  - 0040-148X
VL  - 66
IS  - 2
SP  - 43
EP  - 47
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1973
SN  - 0040-148X
VL  - 65
IS  - 52
SP  - 9
EP  - 13
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Berg, Alexander-Karl
A1  - Schleser, Markus
A1  - Delidovich, Artem
A1  - Houben, Alexander
T1  - Ultraschallunterstützter Schmelzklebstoffauftrag
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2018
U6  - https://doi.org/10.1007/s35145-018-0089-z
VL  - Volume 62
IS  - Issue 12
SP  - 32
EP  - 37
PB  - Springer
ER  - 
TY  - JOUR
A1  - Abbas, Karim
A1  - Hedwig, Lukas
A1  - Balc, Nicolae
A1  - Bremen, Sebastian
T1  - Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling
JF  - Polymers
N2  - Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK’s economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100% solid and subjected to thermal post-treatment. This corresponds to a 20% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70% in tool production.
KW  - polyetheretherketone (PEEK)
KW  - rapid tooling
KW  - infill strategy
KW  - compression behavior
KW  - additive manufacturing
KW  - fused filament fabrication
Y1  - 2023
U6  - https://doi.org/10.3390/polym15214293
N1  - This article belongs to the Special Issue "Polymer Materials and Design Processes for Additively Manufactured Products"
VL  - 2023
IS  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - JOUR
A1  - Henn, Gudrun
A1  - Polaczek, Christa
T1  - Studienerfolg in den Ingenieurwissenschaften
JF  - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1  - 2007
SN  - 0018-2974
VL  - 55
IS  - 5
SP  - 144
EP  - 147
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Topuz, A.
A1  - Tuncel, H. S.
T1  - Einfluß der Parameter beim Diffusionsschweißen der Stähle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1992
SN  - 0036
VL  - 44
IS  - 2
SP  - 97
EP  - 100
ER  - 
TY  - JOUR
A1  - Willms, Herbert
A1  - Beer, Stefan
A1  - Fröhlke, K.
A1  - Haidn, O.J.
T1  - Regelung eines Wasserstoff-/Sauerstoff-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors
Y1  - 1993
N1  - Report: Deutsche Forschungsanstalt für Luft- und Raumfahrt, EN-CA/E (1993) Seite 1-17 (17 Seiten, 14 Bilder, 2 Tabellen, 14 Quellen)
ER  - 
TY  - JOUR
A1  - Raatschen, Hans-Jürgen
T1  - Ingenieurstudium Hundert Jahre : von der Königlichen Höheren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der Fachhochschule
JF  - Fachblatt
Y1  - 2003
VL  - 2003
IS  - 1
SP  - 28
EP  - 29
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Über die Voraussetzungen der Wasserstofflöslichkeit in binären Eisenschmelzen
JF  - Archiv für das Eisenhüttenwesen : Fachberichte
Y1  - 1984
SN  - 0003-8962
SN  - 1611-3683
VL  - 55
IS  - 2
SP  - 45
EP  - 48
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1983
SN  - 0005-9021
SN  - 0940-483X
VL  - 87
IS  - 12
SP  - 1201
EP  - 1204
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - JOUR
A1  - Raatschen, Hans-Jürgen
T1  - Fokussierung von Spannungswellen in einer krummlinig berandeten Scheibe
JF  - ZAMM : Zeitschrift für Angewandte Mathematik und Mechanik
Y1  - 1987
SN  - 1521-4001
N1  - Artikel umfasst die Seiten 11 und 12 des 30-Seiten-langen PDFs der Online-Ausgabe.
VL  - 67
IS  - 4
SP  - T230
EP  - T231
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C
JF  - Zeitschrift für Physikalische Chemie
Y1  - 1982
SN  - 0942-9352
VL  - 133
IS  - 2
SP  - 167
EP  - 174
ER  - 
TY  - JOUR
A1  - Benner, Joachim
T1  - Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren
JF  - Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.
Y1  - 1989
SN  - 0341-2652
VL  - 28
IS  - 12
SP  - 49
EP  - 54
PB  - Vereinigte Fachverl.
CY  - Mainz
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
T1  - Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1978
SN  - 0040-148X
VL  - 70
IS  - 39
SP  - 37
EP  - 41
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Anik, Salahaddin
T1  - Stand der Schweißtechnik in der Türkei
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1991
SN  - 0036-7184
VL  - 43
IS  - 3
SP  - 142
EP  - 145
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)
JF  - Journal of tribology
Y1  - 1985
SN  - 0742-4787
SN  - 1528-8897
VL  - 107
IS  - 4
SP  - 527
EP  - 537
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C
JF  - Zeitschrift für Metallkunde
Y1  - 1988
SN  - 0044-3093
VL  - 79
IS  - 5
SP  - 336
EP  - 339
ER  - 
TY  - JOUR
A1  - Peeken, Heinz
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Benner, Joachim
T1  - Einfluss der Ölverschäumung auf Axiallager mit Kreis- und Michell-Segmenten
JF  - VDI-Z : Zeitschrift für integrierte Produktion
Y1  - 1985
SN  - 0042-1766
VL  - 127
IS  - 5
SP  - 145
EP  - 151
PB  - Springer-VDI-Verl
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Dagsoez, A. K.
T1  - Feinbleche schweißen : die Temperaturverteilung in dünnen Stahlblechplatten beim Lichtbogenschweißen
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1971
SN  - 0040-148X
VL  - 63
IS  - 9
SP  - 57
EP  - 59
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
T1  - Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1978
SN  - 0040-148X
VL  - 70
IS  - 26
SP  - 9
EP  - 13
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Prediction of thermodynamic properties of oxygen in binary metallic solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 6
SP  - 372
EP  - 375
ER  - 
TY  - JOUR
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Spielvogel, A.
A1  - Platt, Werner
T1  - Expertensystem wählt und dimensioniert drehelastische Kupplungen
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1986
SN  - 0040-1498
SN  - 1662-3096
SN  - 0040-148X
SN  - 1023-0823
VL  - 78
IS  - 1
SP  - 92
EP  - 95
PB  - Binkert Medien
CY  - Laufenburg
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Die Vorausbestimmung der Stickstofflöslichkeit in binären Eisenschmelzen
JF  - Archiv für das Eisenhüttenwesen : Fachberichte
Y1  - 1984
SN  - 0003-8962
SN  - 1611-3683
VL  - 55
IS  - 8
SP  - 365
EP  - 367
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Untersuchungen zum Lösungsverhalten von Sauerstoff in Metallschmelzen
JF  - Neue Hütte : metallurgisch-metallkundliche Fachzeitschrift für Forschung und Praxis
Y1  - 1986
SN  - 0028-3207
VL  - 31
IS  - 7
SP  - 255
EP  - 258
ER  -