TY  - JOUR
A1  - Oßmann, Martin
A1  - Kazay, B.
T1  - Simple circuit provides high-side current sensing / Ossmann, M ; Kazay, B.
JF  - EDN. 45 (2000), H. 21
Y1  - 2000
SN  - 0012-7515
SP  - 200
EP  - 200
ER  - 
TY  - JOUR
A1  - Schwarzer, Klemens
A1  - Müller, C.
A1  - Kleine-Hering, H.
T1  - Simple solar systems for heating, hot water and cooking in high altitude regions with high solar radiation / C. Müller ; K. Schwarzer ; H. Kleine-Hering
JF  - Proceedings / organised by: ISES Europe ... [Ed.: Deutsche Gesellschaft für Sonnenenergie e.V. - DGS, Munich ; PSE GmbH - Forschung Entwicklung Marketing, Freiburg]. - Vol 1
Y1  - 2004
SN  - 3-9809656-1-9
N1  - EuroSun <5, 2004, Freiburg, Breisgau> ; Internationales Sonnenforum <14, 2004, Freiburg, Breisgau> ; Deutsche Gesellschaft für Sonnenenergie ; CD-ROM-Ausg.: ISBN 3-9809656-4-3
SP  - 1-653-1-658
PB  - PSE
CY  - Freiburg [Breisgau]
ER  - 
TY  - JOUR
A1  - Monakhova, Yulia
A1  - Diehl, Bernd W. K.
T1  - Simplification of NMR Workflows by Standardization Using 2H Integral of Deuterated Solvent as Applied to Aloe vera Preparations
JF  - Applied Magnetic Resonance
N2  - In this study, a recently proposed NMR standardization approach by 2H integral of deuterated solvent for quantitative multicomponent analysis of complex mixtures is presented. As a proof of principle, the existing NMR routine for the analysis of Aloe vera products was modified. Instead of using absolute integrals of targeted compounds and internal standard (nicotinamide) from 1H-NMR spectra, quantification was performed based on the ratio of a particular 1H-NMR compound integral and 2H-NMR signal of deuterated solvent D2O. Validation characteristics (linearity, repeatability, accuracy) were evaluated and the results showed that the method has the same precision as internal standardization in case of multicomponent screening. Moreover, a dehydration process by freeze drying is not necessary for the new routine. Now, our NMR profiling of A. vera products needs only limited sample preparation and data processing. The new standardization methodology provides an appealing alternative for multicomponent NMR screening. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and is recommended in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).
Y1  - 2021
U6  - https://doi.org/10.1007/s00723-021-01393-4
SN  - 1613-7507
VL  - 52
IS  - 11
SP  - 1591
EP  - 1600
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
A1  - Pulini, Paola
T1  - Simplified airport surface channel model based on the WSSUS assumption
T2  - 2010 Integrated Communications, Navigation and Surveillance Conference (ICNS 2010) : Herndon, Virginia, USA, 11 - 13 May 2010
Y1  - 2010
SN  - 978-1-4244-7457-8
SN  - 2155-4943
SP  - F2-1
EP  - F2-11
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Leidinger, R.
A1  - Wollert, Jörg
T1  - Simplified rapid-prototyping with automation technology
T2  - Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings
Y1  - 2010
SN  - 978-963-9058-29-3
SP  - F2010C093
ER  - 
TY  - CHAP
A1  - Logen, Steffen
A1  - Höfken, Hans
A1  - Schuba, Marko
T1  - Simplifying RAM Forensics : A GUI and Extensions for the Volatility Framework
T2  - 2012 Seventh International Conference on Availability, Reliability and Security (ARES), 20-24 August 2012, Prague, Czech Republic
N2  - The Volatility Framework is a collection of tools for the analysis of computer RAM. The framework offers a multitude of analysis options and is used by many investigators worldwide. Volatility currently comes with a command line interface only, which might be a hinderer for some investigators to use the tool. In this paper we present a GUI and extensions for the Volatility Framework, which on the one hand simplify the usage of the tool and on the other hand offer additional functionality like storage of results in a database, shortcuts for long Volatility Framework command sequences, and entirely new commands based on correlation of data stored in the database.
Y1  - 2012
SN  - 978-1-4673-2244-7
U6  - https://doi.org/10.1109/ARES.2012.12
SP  - 620
EP  - 624
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Pieper, Martin
T1  - Simulating the electromagnetic‐thermal treatment of thin aluminium layers for adhesion improvement
JF  - Physica status solidi (a)
N2  - A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431893
SN  - 1862-6319
VL  - Vol. 212
IS  - 6
SP  - 1234
EP  - 1241
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Gall, J.
A1  - Abel, Dirk
A1  - Ahlbrink, N.
A1  - Pitz-Paal, R.
A1  - Andersson, J.
A1  - Diehl, M.
A1  - Teixeira Boura, Cristiano José
A1  - Schmitz, M.
A1  - Hoffschmidt, Bernhard
T1  - Simulation and control of solar thermal power plants
T2  - International Conference on Renewable Energies and Power Quality : ICREPQ '10 : Granada 23rd - 25th March 2010
Y1  - 2010
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
A1  - Hafner, B.
A1  - Meer, A. von
A1  - Krings, T.
T1  - Simulation and dimensioning program for solar cookers with temporal heat storage and comparison with measurements
T2  - Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Bd 5: Active systems
Y1  - 1993
SP  - 473
EP  - 478
PB  - Hungarian Energy Society
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Achenbach, Timm
A1  - Geimer, K.
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
A1  - Lynen, A.
A1  - Bauer, J.
T1  - Simulation and flow measurements of volumetric high temperature absorbers for solar tower power plants
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - JOUR
A1  - Kern, Alexander
T1  - Simulation and measurement of melting effects on metal sheets caused by direct lightning strikes
JF  - 1991 International Aerospace and Ground Conference on Lightning and Static Electricity : proceedings of a conference ... held at Cocoa Beach, Florida, April 16-19, 1991 / NASA
Y1  - 1991
N1  - International Aerospace and Ground Conference on Lightning and Static Electricity <1991, Cocoa Beach, Fla.> ; United States / National Aeronautics and Space Administration
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Gerber, Peter
A1  - Kügeler, Carsten
A1  - Roelofs, Andreas
T1  - Simulation and measurements of the piezoelectric properties response (d33) of piezoelectric layered thin film structures influenced by the top-electrode size  / Prume, K. ; Gerber, P. ; Kügeler, C. ; Roelofs, A. ; Böttger, U. ; Waser, R. ; Schmitz-Kempen,
Y1  - 2004
SN  - 0-7803-8410-5
N1  - 14th IEEE International Symposium on  Applications of Ferroelectrics, 2004. ISAF-04. 2004
SP  - 7
EP  - 10
ER  - 
TY  - CHAP
A1  - Kremers, Alexander
A1  - Pieper, Martin
T1  - Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software
T2  - COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France
Y1  - 2015
PB  - COMSOL
CY  - Göttingen ; Berlin
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
T1  - Simulation model for the transient process behaviour of solar aluminium recycling in a rotary kiln
JF  - Applied Thermal Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.applthermaleng.2015.01.007
SN  - 1359-4311
N1  - Autor im Original: Spiridon O. Alexopoulos
VL  - 78
SP  - 387
EP  - 396
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Nicolai, M.
A1  - Probst, M.
A1  - Behr, M.
T1  - Simulation of Blood Flow in a Ventricular Assist Device
JF  - inSIDE. 5 (2007), H. 1
Y1  - 2007
SP  - 28
EP  - 31
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - 1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013
Y1  - 2013
SN  - 978-985-553-135-8
SP  - 165
EP  - 167
PB  - Verl. d. Weißruss. Staatl. Univ.
CY  - Minsk
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Raatschen, Hans-Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)
N2  - We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.
Y1  - 2015
SN  - 978-3-319-02534-6 ; 978-3-319-02535-3
SP  - 187
EP  - 212
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Sattler, Johannes Christoph
T1  - Simulation of hybrid solar tower power plants
T2  - 30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5
Y1  - 2012
SP  - 4044
EP  - 4050
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
A1  - Lucas, K.
ED  - Kjelstrup, Signe
T1  - Simulation of industrial energy supply systems with integrated cost optimization
T2  - Proceedings of ECOS 2005, the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems : Trondheim, Norway, June 20 - 22, 2005. - Vol. 2
Y1  - 2005
SN  - 82-519-2041-8
N1  - CD-ROM-Ausg. u.d.T.: Shaping our future energy systems
SP  - 627
EP  - 634
PB  - Tapir Academic Press
CY  - Trondheim
ER  - 
TY  - JOUR
A1  - Wemhöner, Carsten
A1  - Hafner, Bernd
A1  - Schwarzer, Klemens
T1  - Simulation of solar thermal systems with CARNOT blockset in the environment MATLAB-Simulink
Y1  - 2000
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Schäfer, Horst
A1  - Mende, H. H.
T1  - Simulation of stray-field coupling between stacked grain-orientedthree-percent SiFe sheets concerning domain structure and stray-fieldprofile
JF  - IEEE Transactions on Magnetics. 24 (1988), H. 1
Y1  - 1988
SN  - 0018-9464
SP  - 631
EP  - 634
ER  - 
TY  - CHAP
A1  - Behbahani, Mehdi
A1  - Rible, Sebastian
A1  - Moulinec, Charles
A1  - Fournier, Yvan
A1  - Nicolai, Mike
A1  - Crosetto, Paolo
T1  - Simulation of the FDA Centrifugal Blood Pump Using High Performance Computing
T2  - World Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering
Y1  - 2015
VL  - 9
IS  - 5
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Behrens, Jörg
T1  - Simulation of the transient voltages in the auxiliary power network of a large power plant in case of a direct lightning strike to the high-voltage overhead transmission line
Y1  - 2010
N1  - 30th International Conference on Lightning Protection, Cagliari (Italien), 2010
SP  - 749-1
EP  - 749-7
ER  - 
TY  - CHAP
A1  - Achenbach, Timm
A1  - Geimer, Konstantin
A1  - Lynen, Arthur
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
T1  - Simulation of thermo-mechanical processes in open volumetric absorber modules
T2  - SolarPaces 2012 : concentrating solar power and chemical energy systems : Sept. 11 - 14 2012, Marrakech, Marokko
Y1  - 2012
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Schwarzbözl, Peter
T1  - Simulation results for a hybridization concept of a small solar tower power plant
T2  - SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings
Y1  - 2009
SN  - 9783000287558
PB  - Deutsches Zentrum f. Luft- u. Raumfahrt
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Schmitz, M.
A1  - Schwarzbözl, P.
A1  - Pomp, Stefan
T1  - Simulation results for a hybridized operation of a gas turbine or a burner for a small solar tower power plant
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 82
EP  - 83
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Streun, M.
A1  - Al-Kaddoum, R.
A1  - Parl, C.
A1  - Pietrzyk, U.
A1  - Ziemons, Karl
A1  - Waasen, S. van
T1  - Simulation studies of optical photons in monolithic block scintillators
T2  - 2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - The interest in PET detectors with monolithic block scintillators is growing. In order to obtain high spatial resolutions dedicated positioning algorithms are required. But even an ideal algorithm can only deliver information which is provided by the detector. In this simulation study we investigated the light distribution on one surface of cuboid LSO scintillators of different size. Scintillators with a large aspect ratio (small footprint and large height) showed significant position information only for a minimum interaction depth of the gamma particle. The results allow a quantitative estimate for a useful aspect ratio.
Y1  - 2012
SN  - 978-1-4673-0120-6 (electronic ISBN)
SN  - 978-1-4673-0118-3 (print ISBN)
U6  - https://doi.org/10.1109/NSSMIC.2011.6154621
SP  - 1380
EP  - 1382
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - El Moussaoui, Noureddine
A1  - Kassmi, Khalil
A1  - Alexopoulos, Spiros
A1  - Schwarzer, Klemens
A1  - Chayeb, Hamid
A1  - Bachiri, Najib
T1  - Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy
T2  - Materialstoday: Proceedings
N2  - In this paper, we present the structure, the simulation the operation of a multi-stage, hybrid solar desalination system (MSDH), powered by thermal and photovoltaic (PV) (MSDH) energy. The MSDH system consists of a lower basin, eight horizontal stages, a field of four flat thermal collectors with a total area of 8.4 m2, 3 Kw PV panels and solar batteries. During the day the system is heated by thermal energy, and at night by heating resistors, powered by solar batteries. These batteries are charged by the photovoltaic panels during the day. More specifically, during the day and at night, we analyse the temperature of the stages and the production of distilled water according to the solar irradiation intensity and the electric heating power, supplied by the solar batteries. The simulations were carried out in the meteorological conditions of the winter month (February 2020), presenting intensities of irradiance and ambient temperature reaching 824 W/m2 and 23 °C respectively. The results obtained show that during the day the system is heated by the thermal collectors, the temperature of the stages and the quantity of water produced reach 80 °C and 30 Kg respectively. At night, from 6p.m. the system is heated by the electric energy stored in the batteries, the temperature of the stages and the quantity of water produced reach respectively 90 °C and 104 Kg for an electric heating power of 2 Kw. Moreover, when the electric power varies from 1 Kw to 3 Kw the quantity of water produced varies from 92 Kg to 134 Kg. The analysis of these results and their comparison with conventional solar thermal desalination systems shows a clear improvement both in the heating of the stages, by 10%, and in the quantity of water produced by a factor of 3.
Y1  - 2021
U6  - https://doi.org/10.1016/j.matpr.2021.03.115
SN  - 2214-7853
N1  - The Fourth edition of the International Conference on Materials & Environmental Science (ICMES 2020), virtual conference, November 18-28, 2020, Morocco
VL  - 45
IS  - 8
SP  - 7653
EP  - 7660
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Olderog, M.
A1  - Mohr, P.
A1  - Beging, Stefan
A1  - Tsoumpas, C.
A1  - Ziemons, Karl
T1  - Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph
T2  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
N2  - In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50%, while a change of the energy resolution in the absorber layer from 12% to 4.5% results in a reduction of 60%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.
Y1  - 2021
SN  - 978-1-7281-7693-2
U6  - https://doi.org/10.1109/NSS/MIC42677.2020.9507901
N1  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 31 Oct.-7 Nov. 2020, Boston, MA, USA
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Simulation supported design of LIGA Microsystems. Kämper, K.-P.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 3
EP  - 10
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - CHAP
A1  - Kreyer, Jörg
A1  - Esch, Thomas
T1  - Simulation Tool for Predictive Control Strategies for an ORCSystem in Heavy Duty Vehicles
T2  - European GT Conference 2017
N2  - Scientific questions
- How can a non-stationary heat offering in the commercial vehicle be used to reduce fuel consumption?
- Which potentials offer route and environmental information among with predicted speed and load trajectories to increase the efficiency of a ORC-System?
Methods
- Desktop bound holistic simulation model for a heavy duty truck incl. an ORC System
- Prediction of massflows, temperatures and mixture quality (AFR) of exhaust gas
Y1  - 2017
N1  - European GT Conference 2017, 9.-10. Oktober 2017, Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albin, Thivaharan
A1  - Fasse, Alessandro
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
A1  - Albracht, Kirsten
T1  - Simulative Analysis of Joint Loading During Leg Press Exercise for Control Applications
T2  - IFAC-PapersOnLine
Y1  - 2015
U6  - https://doi.org/10.1016/j.ifacol.2015.10.179
N1  - IFAC-PapersOnLine 48-20;
Conference Paper Archive
VL  - 48
IS  - 20
SP  - 435
EP  - 440
ER  - 
TY  - JOUR
A1  - Schuba, Marko
A1  - Reichl, Peter
A1  - Kesdogan, Dogan
A1  - Junghärtchen, Klaus
T1  - Simulative Performance Evaluation of the Temporary Pseudonym Method for Protecting Location Information in GSM Networks / Reichl, P. ; Kesdogan, D. ; Junghärtchen, K. ; Schuba, M.
JF  - Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)
Y1  - 1998
SN  - 3-540-64949-2
N1  - Lecture notes in computer  science ; 1469
SP  - 105
EP  - 116
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Turek, Monik
A1  - Heiden, Wolfgang
A1  - Guo, Sharon
A1  - Riesen, Alfred
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 817
EP  - 823
ER  - 
TY  - JOUR
A1  - Furuichi, K.
A1  - Yoshinobu, T.
A1  - Ermelenko, T.
A1  - Mourzina, Y.
A1  - Iwasaki, H.
A1  - Schöning, Michael Josef
T1  - Simultaneous visualization of multiple ions by the chemical imaging sensor
JF  - Proceedings of the 5th East Asian Conference on Chemical Sensors; the 33rd Chemical Sensor Symposium : December 4 - 7, 2001, Huis Ten Bosch, Sasebo-shi, Nagasaki, Japan / Japan Association of Chemical Sensors; the Electrochemical Society of Japan
Y1  - 2001
N1  - Chemical sensors; 17.2001 Suppl. B; East Asian Conference on Chemical Sensors ; (5, 2001; Nagasaki)
SP  - 399
EP  - 401
PB  - Japan Association of Chemical Sensors
CY  - Kasuga, Fukuoka-ken
ER  - 
TY  - JOUR
A1  - Ackermann, Hans-Josef
T1  - Single chip hardware support for rasterization and texture mapping
JF  - Computers & graphics : CAG ; an international journal of applications in computer graphics. 20 (1996), H. 4
Y1  - 1996
SN  - 0097-8493
SP  - 503
EP  - 514
ER  - 
TY  - JOUR
A1  - Seibler, Jost
A1  - Küter-Luks, Birgit
A1  - Kern, Heidrun
A1  - Streu, Sandra
A1  - Plum, Leona
A1  - Maurer, Jan
A1  - Kühn, Ralf
A1  - Brüning, Jens C.
A1  - Schwenk, Frieder
T1  - Single copy shRNA configuration for ubiquitous gene knockdown in mice
JF  - Nucleic Acids Research
Y1  - 2005
U6  - https://doi.org/10.1093/nar/gni065
SN  - 1362-4962
VL  - 33
IS  - 7
SP  - e67
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Griebel, M.
A1  - Indlekofer, K.M.
A1  - Lüth, H.
T1  - Single electron transport in resonant tunnelling diodes laterally confined by ion implantation. Griebel, M.; Indlekofer, K.M.; Förster, A.; Lüth, H.
JF  - Journal of  Physics D: Applied  Physics. 32 (1999), H. 14
Y1  - 1999
SN  - 1361-6463
SP  - 1729
EP  - 1733
ER  - 
TY  - JOUR
A1  - Oßmann, Martin
A1  - Kazay, B.
T1  - Single mu C pin makes half-duplex RS-232C / Ossmann, M
JF  - EDN. 44 (1999), H. 16
Y1  - 1999
SN  - 0012-7515
SP  - 118
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Schmidt, T.
A1  - Haug, R. J.
T1  - Single-electron transport in small resonant-tunneling diodes with various barrier-thickness asymmetries / T. Schmidt ; R. J. Haug ; K. v. Klitzing ; A. Förster ...
JF  - Physical review / B, Condensed matter and materials physics. 55 (1997), H. 4
Y1  - 1997
SN  - 1095-3795
SP  - 2230
EP  - 2236
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Schmidt, T.
A1  - Tewordt, M.
T1  - Single-electron-tunneling spectroscopy of asymmetric laterally confined double-barrier heterostructures / T. Schmidt ; M. Tewordt ; R. J. Haug ... A. Förster ...
JF  - Solid state electronics. 40 (1996), H. 1-8
Y1  - 1996
SN  - 0038-1101
SP  - 15
EP  - 19
ER  - 
TY  - RPRT
A1  - Esch, Thomas
A1  - Funke, Harald
A1  - Roosen, Petra
T1  - SIoBiA – Safety Implications of Biofuels in Aviation
N2  - Biofuels potentially interesting also for aviation purposes are predominantly liquid fuels produced from biomass. The most common biofuels today are biodiesel and bioethanol. Since diesel engines are rather rare in aviation this survey is focusing on ethanol admixed to gasoline products.
The Directive 2003/30/EC of the European Parliament and the Council of May 8th 2003 on the promotion of the use of biofuels or other renewable fuels for transport encourage a growing admixture of biogenic fuel components to fossil automotive gasoline. Some aircraft models equipped with spark ignited piston engines are approved for operation with automotive gasoline, frequently called “MOGAS” (motor gasoline). The majority of those approvals is limited to MOGAS compositions that do not contain methanol or ethanol beyond negligible amounts. In the past years (bio-)MTBE or (bio-)ETBE have been widely used as blending component of automotive gasoline whilst the usage of low-molecular alcohols like methanol or ethanol has been avoided due to the handling problems especially with regard to the strong affinity for water. With rising mandatory bio-admixtures the conversion of the basic biogenic ethanol to ETBE, causing a reduction of energetic payoff, becomes more and more unattractive. Therefore the direct ethanol admixture is accordingly favoured.
Due to the national enforcements of the directive 2003/30/EC more oxygenates produced from organic materials like bioethanol have started to appear in automotive gasolines already. The current fuel specification EN 228 already allows up to 3 % volume per volume (v/v) (bio-)methanol or up to 5 % v/v (bio-)ethanol as fuel components. This is also roughly the amount of biogenic components to comply with the legal requirements to avoid monetary penalties for producers and distributors of fuels.
Since automotive fuel is cheaper than the common aviation gasoline (AVGAS), creates less problems with lead deposits in the engine, and in general produces less pollutants it is strongly favoured by pilots. But being designed for a different set of usage scenarios the use of automotive fuel with low molecular alcohols for aircraft operation may have adverse effects in aviation operation. Increasing amounts of ethanol admixtures impose various changes in the gasoline’s chemical and physical properties, some of them rather unexpected and not within the range of flight experiences even of long-term pilots.
Y1  - 2010
N1  - Analysis of the safety implications of the use of biofuels (ethanol admixture) for piston engines and general aviation aircraft and assessment of potential environmental benefits.
PB  - EASA
CY  - Köln
ER  - 
TY  - JOUR
A1  - Feng, Yong-Qing
A1  - Seibler, Jost
A1  - Alami, Raouf
A1  - Eisen, Andrew
A1  - Westerman, Karen A.
A1  - Leboulch, Philippe
A1  - Fiering, Steven
A1  - Bouhassira, Eric E.
T1  - Site-specific chromosomal integration in mammalian cells: highly efficient CRE recombinase-mediated cassette exchange
JF  - Journal of Molecular Biology
Y1  - 1999
U6  - https://doi.org/10.1006/jmbi.1999.3113
SN  - 0022-2836
VL  - 292
IS  - 4
SP  - 779
EP  - 785
ER  - 
TY  - JOUR
A1  - Rachinger, Michael
A1  - Bauch, Melanie
A1  - Strittmatter, Axel
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Maurer, Karl-Heinz
A1  - Daniel, Rolf
A1  - Liebl, Wolfgang
A1  - Liesegang, Heiko
A1  - Ehrenreich, Armin
T1  - Size unlimited markerless deletions by a transconjugative plasmid-system in Bacillus licheniformis
JF  - Journal of biotechnology
Y1  - 2013
SN  - 1873-4863 (E-Journal); 0168-1656 (Print)
VL  - Vol. 164
IS  - Iss. 4
SP  - 365
EP  - 369
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dadfar, Dryed Mohammadali
A1  - Camozzi, Denise
A1  - Darguzyte, Milita
A1  - Roemhild, Karolin
A1  - Varvarà, Paola
A1  - Metselaar, Josbert
A1  - Banala, Srinivas
A1  - Straub, Marcel
A1  - Güver, Nihan
A1  - Engelmann, Ulrich M.
A1  - Slabu, Ioana
A1  - Buhl, Miriam
A1  - Leusen, Jan van
A1  - Kögerler, Paul
A1  - Hermanns-Sachweh, Benita
A1  - Schulz, Volkmar
A1  - Kiessling, Fabian
A1  - Lammers, Twan
T1  - Size-isolation of superparamagnetic iron oxide nanoparticles improves MRI, MPI and hyperthermia performance
JF  - Journal of Nanobiotechnology
N2  - Superparamagnetic iron oxide nanoparticles (SPION) are extensively used for magnetic resonance imaging (MRI) and magnetic particle imaging (MPI), as well as for magnetic fluid hyperthermia (MFH). We here describe a sequential centrifugation protocol to obtain SPION with well-defined sizes from a polydisperse SPION starting formulation, synthesized using the routinely employed co-precipitation technique. Transmission electron microscopy, dynamic light scattering and nanoparticle tracking analyses show that the SPION fractions obtained upon size-isolation are well-defined and almost monodisperse. MRI, MPI and MFH analyses demonstrate improved imaging and hyperthermia performance for size-isolated SPION as compared to the polydisperse starting mixture, as well as to commercial and clinically used iron oxide nanoparticle formulations, such as Resovist® and Sinerem®. The size-isolation protocol presented here may help to identify SPION with optimal properties for diagnostic, therapeutic and theranostic applications.
Y1  - 2020
U6  - https://doi.org/10.1186/s12951-020-0580-1
SN  - 1477-3155
VL  - 18
IS  - Article number 22
SP  - 1
EP  - 13
PB  - Nature Portfolio
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Parallel Hybrid Propulsion Systems
T2  - Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
U6  - https://doi.org/10.25967/480227
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Serial Hybrid Propulsion Systems
T2  - Luft- und Raumfahrt - Digitalisierung und Vernetzung : Deutscher Luft- und Raumfahrtkongress 2018. 4. - 6. September 2018 - Friedrichshafen
Y1  - 2018
ER  - 
TY  - JOUR
A1  - Raupp, Sebastian M.
A1  - Schmitt, Marcel
A1  - Walz, Anna-Lena
A1  - Diehm, Ralf
A1  - Hummel, Helga
A1  - Scharfer, Philip
A1  - Schabel, Wilhelm
T1  - Slot die stripe coating of low viscous fluids
JF  - Journal of Coatings Technology and Research
N2  - Slot die coating is applied to deposit thin and homogenous films in roll-to-roll and sheet-to-sheet applications. The critical step in operation is to choose suitable process parameters within the process window. In this work, we investigate an upper limit for stripe coatings. This maximum film thickness is characterized by stripe merging which needs to be avoided in a stable process. It is shown that the upper limit reduces the process window for stripe coatings to a major extent. As a result, stripe coatings at large coating gaps and low viscosities are only possible for relatively thick films. Explaining the upper limit, a theory of balancing the side pressure in the gap region in the cross-web direction has been developed.
Y1  - 2018
U6  - https://doi.org/10.1007/s11998-017-0039-y
SN  - 1935-3804
VL  - 15
IS  - 5
SP  - 899
EP  - 911
PB  - Springer
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
T1  - Small Claims Regulation
T2  - European Encyclopedia of Private International Law
Y1  - 2017
SN  - 9781782547228
PB  - Edward Elgar Publishing
CY  - Cheltenham, UK
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Biele, Jens
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Lange, Caroline
A1  - Ulamec, Stephan
A1  - Ziach, Christian
A1  - Spröwitz, Tom
A1  - Ruffer, Michael
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Toth, Norbert
A1  - Mimasu, Yuya
A1  - Rittweger, Andreas
A1  - Bibring, Jean-Pierre
A1  - Braukhane, Andy
A1  - Boden, Ralf Christian
A1  - Dumont, Etienne
A1  - Jahnke, Stephan Siegfried
A1  - Jetzschmann, Michael
A1  - Krüger, Hans
A1  - Lange, Michael
A1  - Gomez, Antonio Martelo
A1  - Massonett, Didier
A1  - Okada, Tatsuaki
A1  - Sagliano, Marco
A1  - Sasaki, Kaname
A1  - Schröder, Silvio
A1  - Sippel, Martin
A1  - Skoczylas, Thomas
A1  - Wejmo, Elisabet
T1  - Small landers and separable sub-spacecraft for near-term solar sails
T2  - The Fourth International Symposium on Solar Sailing 2017
N2  - Following the successful PHILAE landing with ESA's ROSETTA probe and the launch of the MINERVA rovers and the Mobile Asteroid Surface Scout, MASCOT, aboard the JAXA space probe, HAYABUSA2, to asteroid (162173) Ryugu, small landers have found increasing interest. Integrated at the instrument level in their mothership they support small solar system body studies. With efficient capabilities, resource-friendly design and inherent robustness they are an attractive exploration mission element. We discuss advantages and constraints of small sub-spacecraft, focusing on emerging areas of activity such as asteroid diversity studies, planetary defence, and asteroid mining, on the background of our projects PHILAE, MASCOT, MASCOT2, the JAXA-DLR Solar Power Sail Lander Design Study, and others. The GOSSAMER-1 solar sail deployment concept also involves independent separable sub-spacecraft operating synchronized to deploy the sail. Small spacecraft require big changes in the way we do things and occasionally a little more effort than would be anticipated based on a traditional large spacecraft approach. In a Constraints-Driven Engineering environment we apply Concurrent Design and Engineering (CD/CE), Concurrent Assembly, Integration and Verification (CAIV) and Model-Based Systems Engineering (MBSE). Near-term solar sails will likely be small spacecraft which we expect to harmonize well with nano-scale separable instrument payload packages.
KW  - Small Solar System Body Lander
KW  - Small Spacecraft
KW  - PHILAE
KW  - MASCOT
KW  - Solar Power Sail
Y1  - 2017
N1  - The Fourth International Symposium on Solar Sailing 2017, 17-20 January 2017. Kyoto Research Park, Kyoto, Japan
SP  - 1
EP  - 10
ER  -