TY  - CHAP
A1  - Holler, S.
A1  - Butenweg, Christoph
A1  - Noh, S.-Y.
A1  - Meskouris, Konstantin
T1  - Numerical simulation of textile-reinforced concrete structures
T2  - Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)
Y1  - 2002
SN  - 0-948749-83-0
SP  - 287
EP  - 288
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Kob, Malte
A1  - Niendorf, Thoralf
A1  - Butenweg, Christoph
T1  - An approach for numerical calculation of glottal flow during glottal closure
T2  - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone
Y1  - 2009
SN  - 978-3-9808659-6-8
SP  - 1722
EP  - 1725
PB  - DEGA
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Niendorf, Thoralf
A1  - Frauenrath, Tobias
A1  - Otten, Mario
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - 3D vocal fold geometry mapping using Magnetic Resonance Imaging
T2  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael Möser ... Band 1
Y1  - 2010
SN  - 978-3-9808659-8-2
SP  - 271
EP  - 272
PB  - Deutsche Gesellschaft für Akustik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Frauenrath, Tobias
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Otten, Mario
A1  - Niendorf, Thoralf
T1  - 3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T
T2  - ISMRM-ESMRMB joint annual meeting 2010 : Stockholm, Sweden, 1 - 7 May 2010. Band 4
Y1  - 2010
SN  - 978-1-617-82008-3
SP  - 3087
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Park, Jin
A1  - Butenweg, Christoph
T1  - Seismic safety verification of masonry structures
T2  - Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universität Dresden]. Ed. by: Wolfram Jäger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)
Y1  - 2010
SN  - 978-3-00-031381-3
SP  - 813
EP  - 822
PB  - ARGE 8IMC Dresden
CY  - Radebeul
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - http://dx.doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Meiners, Daniel
T1  - A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems
T2  - Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)
Y1  - 2009
SN  - 978-0-415-45261-8
U6  - http://dx.doi.org/10.1201/9780203881637.ch19
SP  - 293
EP  - 308
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Butenweg, Christoph
T1  - A finite element model of the interaction between intra-and extralaryngeal muscles
T2  - International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France
Y1  - 2004
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Karimi, Iman
A1  - Butenweg, Christoph
A1  - Toll, Britta
T1  - Vulnerability assessment of industrial facilities
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.34
SP  - 34, 73
EP  - 75
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - A seismic design procedure for masonry buildings
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.193
SP  - 465
EP  - 467
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Grunendahl, A.
A1  - de Rochefort, E.
A1  - Butenweg, Christoph
T1  - Numerical models for investigating the causes of low back pain due to whole-body vibrations
T2  - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.
Y1  - 2005
SN  - 978-972-8469-37-3
SP  - 905
EP  - 914
PB  - IST Press
CY  - Lisbon
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Neumann, M.
A1  - Butenweg, Christoph
A1  - Holler, Stefan
T1  - Modelling of textile strengthened masonry
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.184
SP  - 447
EP  - 448
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Krämer, Sebastian
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers
T2  - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ...
Y1  - 2005
SN  - 978-963-8241-68-9
SP  - 2759
EP  - 2764
PB  - OPAKFI Tud. Egyesület
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum cost design of reinforced concrete structures using parallel computing
T2  - Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping
Y1  - 1997
SN  - 0-948749-47-4
SP  - 197
EP  - 202
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum design of reinforced concrete structures
T2  - Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping
Y1  - 1998
SN  - 0-948749-57-1
SP  - 447
EP  - 458
PB  - Civil-Comp Press
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gajewski, R.
A1  - Thierauf, Georg
T1  - A practical approach for the optimum design of reinforced concrete structures
T2  - Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping
Y1  - 1999
SN  - 0-94-8749-59-8
SP  - 245
EP  - 250
PB  - Civil-Comp Press
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Wagner, R.
A1  - Noh, S.-Y.
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic excited granular material silos
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...
Y1  - 2002
SN  - 90-5809-511-8
SP  - 253
EP  - 258
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sheshov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 1556
EP  - 1561
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
A1  - Taddei, Francesca
T1  - Vibration mitigation of wind turbine towers by tuned liquid column dampers
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 1531
EP  - 1538
CY  - Porto
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
A1  - Renault, Philippe
A1  - Hyun, An Jun
T1  - Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS
T2  - Workshop SMART2013 : Paris, France, November 25th - 27th, 2014
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Mykoniou, Konstantin
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
A1  - Klinkel, Sven
T1  - Seismic response analysis of adjacent liquid-storage tanks
JF  - Earthquake engineering and structural dynamics
N2  - A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.
KW  - liquid-structure interaction
KW  - seismic response
KW  - impulsive effects
KW  - liquid-storage tank
KW  - structure-soil-structure interaction
Y1  - 2016
U6  - http://dx.doi.org/10.1002/eqe.2726
SN  - 1096-9845 (E-Journal); 0098-8847 (Print)
VL  - 45
IS  - 11
SP  - 1779
EP  - 1796
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Numerical calibration of a macro-element for vaultes system in historic churches
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Henneböhl, Benedickt
A1  - Butenweg, Christoph
T1  - Global buckling analysis of cylindrical liquid storage tanks under earthquake loading
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 5270
EP  - 5281
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Rosin, Julia
T1  - Seismic analysis of liquid storage tanks
T2  - Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Grützner ; R. Pérez-Lopez ; T. Fernández Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. Vött. Volume 2
Y1  - 2011
SN  - 978-960-466-093-3
SP  - 136
EP  - 139
PB  - The Natural hazards Laboratory, National and Kapodistrian University of Athens
CY  - Athens
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Karadogan, Faruk
T1  - Numerical investigation of AAC wall panels based on the damage plasticity constitutive law
T2  - Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011
Y1  - 2011
SN  - 1425-8129
SP  - 86
EP  - 91
PB  - Stowarzyszenie Producentów Cementu i Wapna
CY  - Krakow
ER  - 
TY  - BOOK
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Structural Dynamics with Applications in Earthquake and Wind Engineering
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.
KW  - Wind turbulence
KW  - Gust wind response
KW  - Spectral analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_3
SP  - 153
EP  - 196
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Milijaš, Aleksa
A1  - Šakić, Bogdan
A1  - Marinković, Marko
A1  - Butenweg, Christoph
A1  - Gams, Matija
A1  - Klinkel, Sven
ED  - Arion, Cristian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Effects of prior in-plane damage on out-of-plane response of masonry infills with openings
T2  - The Third European Conference on Earthquake Engineering and Seismology September 4 – September 9, 2022, Bucharest
N2  - Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in seismic design, during an earthquake event they are subjected to in-plane and out-of-plane forces that can act separately or simultaneously. Since observations of damage to buildings after recent earthquakes showed detrimental effects of in-plane and out-of-plane load interaction on infill walls, the number of studies that focus on influence of in-plane damage on out-of-plane response has significantly increased. However, most of the xperimental campaigns have considered only solid infills and there is a lack of combined in-plane and out-of-plane experimental tests on masonry infills with openings, although windows and doors strongly affect seismic performance. In this paper, two types of experimental tests on infills with window openings are presented. The first is a pure out-of-plane test and the second one is a sequential in-plane and out-of-plane test aimed at investigating the effects of existing in-plane damage on outof-plane response. Additionally, findings from two tests with similar load procedure that were carried out on fully infilled RC frames in the scope of the same project are used for comparison. Test results clearly show that window opening increased vulnerability of infills to combined seismic actions and that prevention of damage in infills with openings is of the utmost importance for seismic safety.
KW  - Seismic loading
KW  - In-plane load
KW  - Out-of-plane load
KW  - Interaction
KW  - Window opening
Y1  - 2022
SN  - 978-973-100-533-1
SP  - 2747
EP  - 2756
ER  - 
TY  - CHAP
A1  - Riga, Evi
A1  - Pitilakis, Kyriazis
A1  - Butenweg, Christoph
A1  - Apostolaki, Stefania
A1  - Karatzetzou, Anna
ED  - Arion, Cristian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities
T2  - The Third European Conference on Earthquake Engineering and Seismology September 4 – September 9, 2022, Bucharest
N2  - The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.
KW  - ESHM20, industrial facilities
KW  - seismic hazard
KW  - seismic design
KW  - safety control
Y1  - 2022
SN  - 978-973-100-533-1
SP  - 3261
EP  - 3270
ER  - 
TY  - CHAP
A1  - Churilov, Sergej
A1  - Dumova-Jovanoska, Elena
A1  - Butenweg, Christoph
ED  - Adam, Christoph
ED  - Heuer, Rudolf
ED  - Lenhardt, Wolfgang
ED  - Schranz, Christian
T1  - Seismic verification of existing masonry buildings and strengthening with reinforced concrete jackets
T2  - Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)
N2  - A methodology for assessment, seismic verification and strengthening of existing masonry buildings is presented in this paper. The verification is performed using a calculation model calibrated with the results from ambient vibration measurements. The calibrated model serves as an input for a deformation-based verification procedure based on the Capacity Spectrum Method (CSM). The bearing capacity of the building is calculated from experimental capacity curves of the individual walls idealized with bilinear elastic-perfectly plastic curves. The experimental capacity curves were obtained from in-plane cyclic loading tests on unreinforced and strengthened masonry walls with reinforced concrete jackets. The seismic action is compared with the load-bearing capacity of the building considering non-linear material behavior with its post-peak capacity. The application of the CSM to masonry buildings and the influence of a traditional strengthening method are demonstrated on the example of a public school building in Skopje, Macedonia.
Y1  - 2013
SN  - 978-3-902749-04-8
N1  - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, Vienna, Austria, Paper No. 523
13. D-A-CH Tagung ; Vienna, Austria, 29. - 30. August 2013
http://hdl.handle.net/20.500.12188/15830 (Error - Cannot Connect to Server)
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Norda, Hannah
ED  - Adam, Christoph
ED  - Heuer, Rudolf
ED  - Lenhardt, Wolfgang
ED  - Schranz, Christian
T1  - Nonlinear analysis of masonry structures according to Eurocode 8
T2  - Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)
Y1  - 2013
SN  - 978-3-902749-04-8
N1  - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, Vienna, Austria, Paper No. 523
13. D-A-CH Tagung ; Vienna, Austria, 29. - 30. August 2013
http://hdl.handle.net/20.500.12188/15830 (Error - Cannot Connect to Server)
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration control of slender structures by semi-active tuned liquid column dampers
T2  - Conference of the ASCE Engineering Mechanics Institute , Evanston, IL , USA , EMI 2013 , 2013-08-04 - 2013-08-07
Y1  - 2013
N1  - http://www.emi2013.northwestern.edu/openconf/modules/request.php?module=oc_program&action=view.php&a=&id=213&type=1
Seite kann nicht gefunden werden.
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration mitigation of wind turbine towers by a new semiactive Tuned Liquid Column Damper
T2  - 6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Lozana, Lara
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
ED  - Papadrakakis, Manolis
ED  - Papadrakakis, M.
ED  - Papadopoulos, V.
ED  - Plevris, V.
T1  - Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction
T2  - 5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Pavese, Alberto
A1  - Lanese, Igor
A1  - Hoffmeister, Benno
A1  - Pinkawa, Marius
A1  - Vulcu, Mihai-Cristian
A1  - Bursi, Oreste
A1  - Nardin, Chiara
A1  - Paolacci, Fabrizio
A1  - Quinci, Gianluca
A1  - Fragiadakis, Michalis
A1  - Weber, Felix
A1  - Huber, Peter
A1  - Renault, Philippe
A1  - Gündel, Max
A1  - Dyke, Shirley
A1  - Ciucci, M.
A1  - Marino, A.
T1  - Seismic performance of multi-component systems in special risk industrial facilities
T2  - 17. World Conference on Earthquake Engineering , Sendai , Japan , 17WCEE , 2021-09-27 - 2021-10-02
N2  - Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi- Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behavior of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behavior of the test structure and installations is investigated with and without base isolation. Furthermore, both firmly anchored and isolated components are taken into account to compare their dynamic behavior and interactions with each other. Artificial and synthetic ground motions are applied to study the seismic response at different PGA levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the numerical simulations to calibrate the tests on the prototype, the experimental setup of the investigated structure and installations, selected measurement data and finally describes preliminary experimental results.
KW  - industrial facilities
KW  - piping
KW  - installations
KW  - seismic loading
KW  - earthquakes
Y1  - 2021
ER  - 
TY  - JOUR
A1  - Edip, K.
A1  - Sesov, V.
A1  - Butenweg, Christoph
A1  - Bojadjieva, J.
T1  - Development of coupled numerical model for simulation of multiphase soil
JF  - Computers and Geotechnics
N2  - In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed.
Y1  - 2018
U6  - http://dx.doi.org/10.1016/j.compgeo.2017.08.016
SN  - 0266-352X
VL  - 96
SP  - 118
EP  - 131
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
T1  - Seismic design of structures and components in industrial units
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.
KW  - Industrial units
KW  - Seismic design
KW  - Tanks
KW  - Silos
KW  - Components
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_5
SP  - 359
EP  - 481
PB  - Springer
CY  - Berlin
ER  -