TY  - GEN
A1  - Mayntz, Joscha
A1  - Keimer, Jona
A1  - Tegtmeyer, Philipp
A1  - Dahmann, Peter
A1  - Hille, Sebastian
A1  - Stumpf, Eike
A1  - Fisher, Alex
A1  - Dorrington, Graham
T1  - Aerodynamic Investigation on Efficient Inflight Transition of a Propeller from Propulsion to Regeneration Mode
T2  - AIAA SCITECH 2022 Forum
N2  - This paper discusses a new way of inflight power regeneration for electric or hybrid-electric driven general aviation aircraft with one powertrain for both configurations. Three different approaches for the shift from propulsion to regeneration mode are analyzed. Numerical cal-culation and wind tunnel results are compared and show the highest regeneration potential for the "Windmill" approach, where the propeller blades are flipped, and rotation is reversed. A combination of all regeneration approaches for a realistic flight mission is discussed.
Y1  - 2021
U6  - https://doi.org/10.2514/6.2022-0546
N1  - AIAA SCITECH 2022 Forum, January 3-7, 2022, San Diego, CA & Virtual
PB  - AIAA
CY  - Reston, Va.
ER  - 
TY  - PAT
A1  - Rosenkranz, Josef
T1  - Überwachungsvorrichtung für eine Auswuchtmaschine : Patentschrift
Y1  - 2001
PB  - Deutsches Patent- und Markenamt
CY  - München
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - https://doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kemper, Hans
A1  - Hellenbroich, Gereon
A1  - Esch, Thomas
T1  - Concept of an innovative passenger-car hybrid drive for European driving conditions
T2  - Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig
N2  - The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 % savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.
Y1  - 2009
SN  - 978-3-937655-20-8
SP  - 264
EP  - 287
PB  - Gesamtzentrum für Verkehr (GZVB)
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - JOUR
A1  - Mikucki, Jill Ann
A1  - Schuler, C. G.
A1  - Digel, Ilya
A1  - Kowalski, Julia
A1  - Tuttle, M. J.
A1  - Chua, Michelle
A1  - Davis, R.
A1  - Purcell, Alicia
A1  - Ghosh, D.
A1  - Francke, G.
A1  - Feldmann, M.
A1  - Espe, C.
A1  - Heinen, Dirk
A1  - Dachwald, Bernd
A1  - Clemens, Joachim
A1  - Lyons, W. B.
A1  - Tulaczyk, S.
T1  - Field-Based planetary protection operations for melt probes: validation of clean access into the blood falls, antarctica, englacial ecosystem
JF  - Astrobiology
N2  - Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.
Y1  - 2023
U6  - https://doi.org/10.1089/ast.2021.0102
SN  - 1557-8070 (online)
SN  - 153-1074 (print)
VL  - 23
IS  - 11
SP  - 1165
EP  - 1178
PB  - Liebert
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Weihe, Stefan
A1  - Ernst, Ansgar
A1  - Röth, Thilo
A1  - Proksch, Johannes
T1  - Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau
JF  - Lightweight Design
N2  - In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen
zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding
GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler
Tooling GmbH & Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden
am Beispiel des vorderen Dachquerträgers des Mercedes-Benz Viano/Vito ausführlich
untersucht.
Y1  - 2013
SN  - 2192-8738 (Online)
SN  - 1865-4819 (Print)
VL  - 6
IS  - 2
SP  - 38
EP  - 43
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Carzana, Livio
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Model and trajectory optimization for an ideal laser-enhanced solar sail
T2  - 68th International Astronautical Congress
N2  - A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The potential source of the laser beam is a laser satellite that coverts solar power (in the inner solar system) or nuclear power (in the outer solar system) into laser power. Such a laser satellite (or many of them) can orbit anywhere in the solar system and its optimal orbit (or their optimal orbits) for a given mission is a subject for future research. This contribution provides the model for an ideal laser-enhanced solar sail and investigates how a laser can enhance the thrusting capability of such a sail. The term ”ideal” means that the solar sail is assumed to be perfectly reflecting and that the laser beam is assumed to have a constant areal power density over the whole sail area. Since a laser beam has a limited divergence, it can provide radiation pressure at much larger solar distances and increase the radiation pressure force into the desired direction. Therefore, laser-enhanced solar sails may make missions feasible, that would otherwise have prohibitively long flight times, e.g. rendezvous missions in the outer solar system. This contribution will also analyze exemplary mission scenarios and present optimial trajectories without laying too much emphasis on the design and operations of the laser satellites. If the mission studies conclude that laser-enhanced solar sails would have advantages with respect to ”traditional” solar sails, a detailed study of the laser satellites and the whole system architecture would be the second next step
Y1  - 2017
N1  - 68th International Astronautical Congress: Unlocking Imagination, Fostering Innovation and Strengthening Security, IAC 2017, 2017-09-25 → 2017-09-29, Adelaide, Australia
ER  - 
TY  - PAT
A1  - Wahle, Michael
A1  - Franke, Harald
A1  - Roland, Peter
T1  - Verfahren und Vorrichtung zur Herstellung von Bauteilen aus Verbundwerkstofflaminaten mit Duromermatrix : Offenlegungsschrift
Y1  - 1993
PB  - Deutsches Patent- und Markenamt
CY  - München
ER  - 
TY  - CHAP
A1  - Pflug, J.
A1  - Wahle, Michael
ED  - Bürger, Gudrun
T1  - Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente
T2  - Basistechnologien für neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt ; 1994,3)
Y1  - 1994
SP  - 1135
EP  - 1144
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - RPRT
A1  - Rosenkranz, Josef
T1  - Berücksichtigung des Einflusses von Gleitlagergehäusen auf das dynamische Verhalten von Rotoren : Abschlußbericht : Forschungsvorhaben Nr. 128 "Gleitlagergehäusesteifigkeit" ; Berichtszeitraum 1985-1988. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 303)
Y1  - 1989
N1  - Förderkennzeichen BMWi/AIF-Nr. 6371
PB  - FVA
CY  - Frankfurt am Main
ER  - 
TY  - THES
A1  - Wahle, Michael
T1  - Beitrag zur passiven Kontrolle schwach gedämpfter elastischer Strukturen mittels dynamischer Schwingungsdämpfer
Y1  - 1985
N1  - Aachen, Techn. Hochsch., Diss., 1984
ER  - 
TY  - JOUR
A1  - Peeken, Heinz
A1  - Rosenkranz, Josef
A1  - Schelenz, R.
T1  - Berücksichtigung des Einflusses der Gleitlagergehäusesteifigkeit auf das dynamische Verhalten von Rotoren
JF  - Antriebstechnik : Organ der Forschungsvereinigung Antriebstechnik e.V.
Y1  - 1991
SN  - 0341-2652
VL  - 30
IS  - 9
SP  - 71
EP  - 75
ER  - 
TY  - THES
A1  - Polaczek, Christa
T1  - Automatische 3-dimensionale FEM-Netzgenerierung für die Formfüll- und Erstarrungssimulation. - (Fortschrittberichte VDI : Reihe 20, Rechnerunterstützte Verfahren ; 182)
Y1  - 1995
SN  - 3-18-318220-3
N1  - Zugl.: Aachen, Techn. Hochsch., Diss., 1994
IS  - Als Ms. gedr.
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes
T2  - Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)
Y1  - 1983
SP  - 339
EP  - 353
PB  - Begell House
CY  - Redding, Connecticut
ER  - 
TY  - CHAP
A1  - Brandt, D.
A1  - Güsken, J.
A1  - Büchen, W.
A1  - Wahle, Michael
A1  - Huppatz, W.
A1  - Koewius, A.
A1  - Linn, W.
A1  - Sedlaceck, G.
T1  - Konstruieren mit Aluminium [Kapitel 4]
T2  - Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale Düsseldorf. - Bd. 3: Weiterverarbeitung und Anwendung
Y1  - 1997
SN  - 3-87017-243-6
SP  - 359
EP  - 544
PB  - Aluminium-Verlag
CY  - Düsseldorf
ET  - 15. Auflage
ER  - 
TY  - CHAP
A1  - Gitter, R.
A1  - Hornhardt, Ch.
A1  - Koewius, A.
A1  - Wahle, Michael
A1  - Landwein, Th. M.
A1  - Linn, W.
A1  - Meiners, F.
A1  - Wenk, L.
T1  - Konstruieren mit Aluminium [Kapitel 4]
T2  - Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale Düsseldorf. - Bd. 3: Weiterverarbeitung und Anwendung
Y1  - 2003
SN  - 3-87017-275-4
SP  - 355
EP  - 599
PB  - Aluminium-Verlag
CY  - Düsseldorf
ET  - 16. Auflage
ER  -