TY - JOUR A1 - Förster, Arnold A1 - Cambel, V. A1 - Kicin, S. A1 - Kuliffayová, M. T1 - Preparation of patterned GaAs structures for MEMS and MOEMS. Cambel, V.; Kicin, S.; Kuliffayová, M.; Kovácová, E.; Novák, J.; Kostic, I.; Förster, A. JF - Materials Science and Engineering: C. 19 (2002), H. 2 Y1 - 2002 SN - 0928-4931 SP - 161 EP - 165 ER - TY - JOUR A1 - Förster, Arnold A1 - Malindretos, Jörg A1 - Indlekofer, Klaus Michael A1 - Lepsa, Mihail Ion T1 - Homogeneity analysis of ion-implanted resonant tunnelling diodes for applications in digital logic circuits. Malindretos, Jörg; Förster, Arno; Indlekofer, Klaus Michael; Lepsa, Mihail Ion; Hardtdegen, Hilde; Schmidt, Roland; Luth, Hans JF - Superlattices and Microstructures. 31 (2002), H. 6 Y1 - 2002 SN - 0749-6036 SP - 315 EP - 325 ER - TY - JOUR A1 - Förster, Arnold A1 - Darmo, J. A1 - Schafer, F. A1 - Kordos, P. T1 - Thermal resistance of the semiconductor structures for a photomixing device. Darmo, J.; Schafer, F.; Forster, A.; Kordos, P.; Gusten, R JF - Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza Y1 - 2002 SN - 0-7803-7276-X N1 - International Conference on Advanced Semiconductor Devices and Microsystems ; (4, 2002, Smolenice). ASDAM '02 ; (4 : ; 2002.10.14-16 : ; Smolenice) SP - 87 EP - 90 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - JOUR A1 - Förster, Arnold A1 - Mikulics, M. A1 - Siebe, F. A1 - Fox, A. T1 - Generation of 460 GHz radiation by photomixing in low-temperature-grown MBE GaAs. Mikulics, M.; Siebe, F.; Fox, A.; Marso, M.; Forster, A.; Stuer, H.; Schafer, F.; Gusten, R.; Kordos, P. JF - Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza Y1 - 2002 SN - 0-7803-7276-X N1 - International Conference on Advanced Semiconductor Devices and Microsystems ; (4, 2002, Smolenice). ASDAM '02 ; (4 : ; 2002.10.14-16 : ; Smolenice) SP - 129 EP - 132 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - JOUR A1 - Förster, Arnold A1 - Vitusevich, S. A. A1 - Belyaev, A. E. A1 - Sheka, D. I. T1 - Resonant tunneling effect in a periodically modulated electrical field. Vitusevich, S.A.; Forster, A.; Belyaev, A.E.; Sheka, D.I.; Luth, H.; Klein, N.; Danylyuk, S.V.; Konakova, R. JF - Proceedings of the Tenth International Conference on Modulated Semiconductor Structures : held at the Johannes Kepler University, Linz, Austria, July 23 - 27, 2001 / MSS 10. Guest ed.: Günther Bauer ... Y1 - 2002 N1 - International Conference on Modulated Semiconductor Structures ; (10, 2001, Linz). Zugleich: Physica E: Low-dimensional Systems and Nanostructures. 13(2002)2-4. ISSN 1386-9477 SP - 811 EP - 813 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Förster, Arnold A1 - Adam, R. A1 - Mikulics, M. A1 - Schelten, J. T1 - Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R. JF - Applied Physics Letters. 81 (2002), H. 18 Y1 - 2002 SN - 1077-3118 SP - 3485 EP - 3487 ER - TY - JOUR A1 - Förster, Arnold A1 - Mikulics, M. A1 - Marso, M. A1 - Adam, R. T1 - Low-temperature-grown MBE GaAs for terahertz photomixers. Mikulics, M.; Marso, M.; Adam, R.; Fox, A.; Buca, D.; Förster, A.; Kordos, P.; Xu, Y.; Sobolewski, R. JF - 2001 Symposium on Electron Devices for Microwave and Optoelectronic Applications ; [Vienna University of Technology, Institute of Electrical Measurements and Circuit Design, 15 - 16 November 2001, Vienna, Austria ; proceedings] / EDMO 2001. Organised by: Institute of Electrical Measurements and Circuit Design, Vienna University of Technology, Austria. With technical co-sponsorship from IEEE Electron Devices Society Y1 - 2001 SN - 078037049X N1 - IEEE catalog number: 01TH8567 SP - 155 EP - 155 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - JOUR A1 - Krafft, B. A1 - Förster, Arnold A1 - Hart, A. van der A1 - Schäpers, T. T1 - Control of Aharonov-Bohm oscillations in a AlGaAs/GaAs ring by asymmetric and symmetric gate biasing JF - Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4 Y1 - 2001 SN - 1386-9477 SP - 635 EP - 641 ER - TY - JOUR A1 - Förster, Arnold A1 - Marso, M. A1 - Gersdorf, P. A1 - Fox, A. T1 - An InAlAs-InGaAs OPFET with responsivity above 200 A/W at 1.3-μm wavelength. Marso, M.; Gersdorf, P.; Fox, A.; Hodel, U.; Lambertini, R.; Kordos, P. JF - IEEE Photonics Technology Letters. 11 (1999), H. 1 Y1 - 1999 SN - 1041-1135 SP - 117 EP - 119 ER - TY - JOUR A1 - Rosenauer, A. A1 - Oberst, W. A1 - Litvinov, D. A1 - Gerthsen, D. A1 - Förster, Arnold A1 - Schmidt, R. T1 - Structural and Chemical Investigation of In-0.6Ga0.4As Stranski-Krastanow Layers Burried in GaAs by Transmission Electron Microscopy JF - Physical Review B. 61 (2000), H. 12 Y1 - 2000 SN - 1095-3795 SP - 8276 EP - 8288 ER - TY - JOUR A1 - Förster, Arnold A1 - Vitusevich, S. A. A1 - Belyaev, A. E. T1 - Optically controlled 2D tunneling in GaAs delta-doped p-n junction / S. A. Vitusevich ; A. Förster ; A. E. Belyaev ... JF - Semiconductor Physics, Quantum Electronics & Optoelectronics (SQO) : International Scientific Journal. 2 (1999), H. 1 Y1 - 1999 SN - 1605-6582 SP - 7 EP - 10 ER - TY - JOUR A1 - Förster, Arnold A1 - Vitusevich, S. A. A1 - Belyaev, B. A. T1 - Intrinsic bistability effect in delta doped tunneling diodes / S. A. Vitusevich ; A. Förster ; B. A. Belyaev ... JF - Proceedings of the XXVIII International School on Physics of Semiconducting Compounds : Jaszowiec, Poland, June 6 - 11, 1999 / Polish Academy of Sciences, Institute of Physics. Ed. of the proceedings Wojciech Szuszkiewicz Y1 - 1999 N1 - International School on Physics of Semiconducting Compounds <28, 1999, Jaszowiec> ; Acta physica Polonica : A ; 96, no. 5 CY - Warsaw ER - TY - JOUR A1 - Förster, Arnold A1 - Lachenmann, S. G. A1 - Friedrich, I. A1 - Uhlisch, D. T1 - Superconductor/semiconductor step junctions: the basic element for hybrid three terminal devices. Lachenmann, S. G., Förster, A.; Friedrich, I.; Uhlisch, D.; Schäpers, Th.; Kastalsky, A.; Golubov, A. A. JF - Applied Superconductivity. 6 (1999), H. 10-12 Y1 - 1999 SN - 0964-1807 SP - 681 EP - 688 ER - TY - JOUR A1 - Förster, Arnold A1 - Vitusevich, S. A. A1 - Belyaev, A. E. A1 - Indlekofer, K. M. T1 - Resonant tunneling effect in delta p-n GaAs junction. Vitusevich, S. A.; Förster, A.; Belyaev, A. E.; Indlekofer, K. M.; Lüth, H.; Konakova, R. V. JF - Microelectronic Engineering. 46 (1999), H. 1-4 Y1 - 1999 SN - 0167-9317 N1 - International Conference on Micro- and Nanofabrication SP - 169 EP - 172 ER - TY - JOUR A1 - Schwarzer, Klemens A1 - Silva, Maria Eugênia Vieira da A1 - Faber, Christian A1 - Müller, Christoph T1 - Solar thermal desalination system with heat recovery JF - Desalination. 137 (2001), H. 1-3 Y1 - 2001 SN - 0011-9164 SP - 23 EP - 29 ER - TY - JOUR A1 - Breitbach, Gerd A1 - Schubert, F. T1 - A contribution to stress prediction in coatings for gas turbine blades JF - Archive of applied mechanics. 73 (2004), H. 9-10 Y1 - 2004 SN - 0939-1533 N1 - 2. ISSN (Druck-Ausg.): 1432-0681 SP - 682 EP - 689 ER - TY - JOUR A1 - Breitbach, Gerd A1 - Schmidt-Plutka, A. A1 - Schubert, F. A1 - Nickel, H. T1 - Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings JF - Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures Y1 - 1993 SN - 0-444-81515-5 N1 - SMiRT <12, 1993, Stuttgart> ; L08/3 SP - 203 EP - 208 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Breitbach, Gerd A1 - Deschka, S. A1 - Akiba, M. T1 - High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ; M. Akiba ; G. Breitbach ... JF - International journal of refractory metals and hard materials. 11 (1992), H. 6 Y1 - 1992 SN - 0263-4368 N1 - 2. ISSN (Druck-Ausg.): 0263-4368 SP - 367 EP - 375 ER - TY - JOUR A1 - Breitbach, Gerd A1 - Wolf, U. A1 - Deschka, S. A1 - Nickel, H. T1 - Thermomechanical analysis of an actively cooled divertor mock up JF - Tagungsbericht : Jahrestagung Kerntechnik : Stadthalle Karlsruhe, 5.-7. Mai 1992, Karlsruhe = Proceedings / Kerntechnische Gesellschaft ... [Red.: Karl G. Bauer]. - 1. Aufl., als Ms. gedr.. Y1 - 1992 N1 - Jahrestagung Kerntechnik <1992, Karlsruhe> SP - 457 EP - 461 PB - INFOFORUM CY - Bonn ER - TY - JOUR A1 - Hardt, Arno A1 - Bisplinghoff, J. A1 - Ernst, J. A1 - Löhr, R. T1 - On-line apparatus BANDIT for half-life determination of short-lived neutron deficient isotopes. A. Hardt, J. Bisplinghoff, J. Ernst, R. Löhr, H. Machner, T . Mayer-Kuckuk JF - Nuclear Instruments and Methods. 143 (1977), H. 3 Y1 - 1977 SN - 0029-554X SP - 519 EP - 523 ER - TY - JOUR A1 - Hardt, Arno A1 - Köhler, M. A1 - Müller, K. D. A1 - Stoff, H. T1 - A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the Jülich Cyclotron "JULIC". M. Köhler, K. D. Müller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-Böricke , J. Meißburger JF - Nuclear Instruments and Methods. 75 (1980), H. 2-3 Y1 - 1980 SN - 0029-554X SP - 357 EP - 362 ER - TY - JOUR A1 - Mohnke, Andreas T1 - High-rate sputtering of zinc oxide with a funnel-shaped magnetic field: Effect of the target thickness on the layer properties JF - Vakuum-Technik. 36 (1987), H. 5 Y1 - 1987 SN - 0042-2266 N1 - unter 63 ZS 073-1986/87 in der Bibliothek Jülich vorhanden SP - 148 EP - 151 ER - TY - JOUR A1 - Kern, Alexander A1 - Heidler, F. A1 - Zischank, W. T1 - Induced overvoltages in cable ducts taking into account the current flow into earth / F. Heidler ; W. Zischank ... A. Kern ... JF - Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom Y1 - 1998 N1 - International Conference on Lightning Protection <24, 1998, Birmingham> ; School of Engineering and Advanced Technology ; ICLP <4, 1998, Birmingham> CY - Birmingham ER - TY - JOUR A1 - Fischer, W. A. A1 - Dören, Horst-Peter A1 - Janke, Dieter T1 - Aluminium nitride probes for application in iron melts JF - Archiv für das Eisenhüttenwesen. 52 (1981), H. 3 Y1 - 1981 SN - 0003-8962 SP - 91 EP - 98 ER - TY - JOUR A1 - Hellmanns, Mark A1 - Böhm, Stefan A1 - Dilger, Klaus T1 - Manual applications of adhesives JF - Journal of adhesion and interface Y1 - 2006 VL - Vol. 7 IS - No. 4 SP - 24 EP - 27 ER - TY - JOUR A1 - Böhm, Stefan A1 - Hellmanns, Mark A1 - Backes, Andreas A1 - Dilger, Klaus T1 - Lock-in thermography based NDT of parts for the automotive industry JF - Journal of adhesion and interface Y1 - 2006 VL - Vol. 7 IS - No. 4 SP - 10 EP - 12 ER - TY - JOUR A1 - Sabitova, A. A1 - Ebert, Ph. A1 - Lenz, A. A1 - Schaafhausen, S. A1 - Ivanova, L. A1 - Dähne, M. A1 - Hoffmann, A. A1 - Dunin-Borkowski, R. E. A1 - Förster, Arnold A1 - Grandidier, B. A1 - Eisele, H. T1 - Intrinsic bandgap of cleaved ZnO(112¯0) surfaces JF - Applied physics letters Y1 - 2013 SN - 1077-3118 (E-Journal); 0003-6951 (Print) VL - Vol. 102 SP - 021608 ER - TY - JOUR A1 - Alebouyeh Samami, Behzad A1 - Pieper, Martin A1 - Breitbach, Gerd A1 - Hodapp, Josef T1 - Heat production in the windings of the stators of electric machines under stationary condition JF - Heat and mass transfer N2 - In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results. Y1 - 2014 U6 - https://doi.org/10.1007/s00231-014-1371-8 SN - 0947-7411 (Print) ; 1432-1181 (E-Journal) VL - 50 SP - 1707 EP - 1716 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Jildeh, Zaid B. A1 - Wagner, Torsten A1 - Schöning, Michael Josef A1 - Pieper, Martin T1 - Simulating the electromagnetic‐thermal treatment of thin aluminium layers for adhesion improvement JF - Physica status solidi (a) N2 - A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed. Y1 - 2015 U6 - https://doi.org/10.1002/pssa.201431893 SN - 1862-6319 VL - Vol. 212 IS - 6 SP - 1234 EP - 1241 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Mottaghy, Darius A1 - Pechnig, Renate A1 - Vogt, Christian T1 - The geothermal project Den Haag: 3D numerical models for temperature prediction and reservoir simulation JF - Geothermics N2 - The proposed Den Haag Zuidwest district heating system of the city of The Hague consists of a deep doublet in a Jurassic sandstone layer that is designed for a production temperature of 75 °C and a reinjection temperature of 40 °C at a flow rate of 150 m3 h−1. The prediction of reservoir temperature and production behavior is crucial for success of the proposed geothermal doublet. This work presents the results of a study of the important geothermal and geohydrological issues for the doublet design. In the first phase of the study, the influences of the three-dimensional (3D) structures of anticlines and synclines on the temperature field were examined. A comprehensive petrophysical investigation was performed to build a large scale 3D-model of the reservoir. Several bottomhole temperatures (BHTs), as well as petrophysical logs were used to calibrate the model using thermal conductivity measurements on 50 samples from boreholes in different lithological units in the study area. Profiles and cross sections extracted from the calculated temperature field were used to study the temperature in the surrounding areas of the planned doublet. In the second phase of the project, a detailed 3D numerical reservoir model was set up, with the aim of predicting the evolution of the producer and injector temperatures, and the extent of the cooled area around the injector. The temperature model from the first phase provided the boundary conditions for the reservoir model. Hydraulic parameters for the target horizons, such as porosity and permeability, were taken from data available from the nearby exploration wells. The simulation results are encouraging as no significant thermal breakthrough is predicted. For the originally planned location of the producer, the extracted water temperature is predicted to be around 79 °C, with an almost negligible cooling in the first 50 years of production. When the producer is located shallower parts of the reservoir, the yield water temperatures is lower, starting at ≈76 °C and decreasing to ≈74 °C after 50 years of operation. This comparatively larger decrease in temperature with time is caused by the structural feature of the reservoir, namely a higher dip causes the cooler water to easily move downward. In view of the poor reservoir data, the reservoir simulation model is constructed to allow iterative updates using data assimilation during planned drilling, testing, and production phases. Measurements during an 8 h pumping test carried out in late 2010 suggest that a flow rate of 150 m3 h−1 is achievable. Fluid temperatures of 76.5 °C were measured, which is very close to the predicted value. Y1 - 2011 U6 - https://doi.org/10.1016/j.geothermics.2011.07.001 SN - 0375-6505 VL - 40 IS - 3 SP - 199 EP - 210 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Mottaghy, Darius A1 - Schwamborn, G. A1 - Rath, V. T1 - Past climate changes and permafrost depth at the Lake El'gygytgyn site: implications from data and thermal modeling JF - Climate of the Past Y1 - 2013 U6 - https://doi.org/10.5194/cp-9-119-2013 SN - 1814-9332 VL - 9 IS - 1 SP - 119 EP - 133 PB - Copernicus CY - Katlenburg-Lindau ER - TY - JOUR A1 - Vogt, Christian A1 - Iwanowski-Strahser, Katha A1 - Marquart, Gabriele A1 - Arnold, Juliane A1 - Mottaghy, Darius A1 - Pechnig, Renate A1 - Gnjezda, Daniel A1 - Clauser, Christoph T1 - Modeling contribution to risk assessment of thermal production power for geothermal reservoirs JF - Renewable Energy Y1 - 2013 U6 - https://doi.org/10.1016/j.renene.2012.11.026 SN - 0960-1481 VL - 53 SP - 230 EP - 241 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Mottaghy, Darius A1 - Schellschmidt, R. A1 - Popov, Y. A. A1 - Clauser, C. A1 - Kukkonen, I. T. A1 - Nover, G. A1 - Milanovsky, S. A1 - Romushkevich, R. A. T1 - New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection JF - Tectonophysics Y1 - 2005 U6 - https://doi.org/10.1016/j.tecto.2005.03.005 SN - 1879-3266 VL - 401 IS - 1-2 SP - 119 EP - 142 ER - TY - JOUR A1 - Mottaghy, Darius A1 - Rath, Volker T1 - Latent heat effects in subsurface heat transport modelling and their impact on palaeotemperature reconstructions JF - Geophysical Journal International Y1 - 2006 U6 - https://doi.org/10.1111/j.1365-246X.2005.02843.x SN - 1365-246X VL - 164 IS - 1 SP - 236 EP - 245 ER - TY - JOUR A1 - Vogt, C. A1 - Mottaghy, Darius A1 - Wolf, A. A1 - Rath, V. A1 - Pechnig, R. A1 - Clauser, C. T1 - Reducing temperature uncertainties by stochastic geothermal reservoir modelling JF - Geophysical Journal International N2 - Quantifying and minimizing uncertainty is vital for simulating technically and economically successful geothermal reservoirs. To this end, we apply a stochastic modelling sequence, a Monte Carlo study, based on (i) creating an ensemble of possible realizations of a reservoir model, (ii) forward simulation of fluid flow and heat transport, and (iii) constraining post-processing using observed state variables. To generate the ensemble, we use the stochastic algorithm of Sequential Gaussian Simulation and test its potential fitting rock properties, such as thermal conductivity and permeability, of a synthetic reference model and—performing a corresponding forward simulation—state variables such as temperature. The ensemble yields probability distributions of rock properties and state variables at any location inside the reservoir. In addition, we perform a constraining post-processing in order to minimize the uncertainty of the obtained distributions by conditioning the ensemble to observed state variables, in this case temperature. This constraining post-processing works particularly well on systems dominated by fluid flow. The stochastic modelling sequence is applied to a large, steady-state 3-D heat flow model of a reservoir in The Hague, Netherlands. The spatial thermal conductivity distribution is simulated stochastically based on available logging data. Errors of bottom-hole temperatures provide thresholds for the constraining technique performed afterwards. This reduce the temperature uncertainty for the proposed target location significantly from 25 to 12 K (full distribution width) in a depth of 2300 m. Assuming a Gaussian shape of the temperature distribution, the standard deviation is 1.8 K. To allow a more comprehensive approach to quantify uncertainty, we also implement the stochastic simulation of boundary conditions and demonstrate this for the basal specific heat flow in the reservoir of The Hague. As expected, this results in a larger distribution width and hence, a larger, but more realistic uncertainty estimate. However, applying the constraining post-processing the uncertainty is again reduced to the level of the post-processing without stochastic boundary simulation. Thus, constraining post-processing is a suitable tool for reducing uncertainty estimates by observed state variables. Y1 - 2010 U6 - https://doi.org/10.1111/j.1365-246X.2009.04498.x SN - 1365-246X VL - 181 IS - 1 SP - 321 EP - 333 PB - Oxford University Press CY - Oxford ER - TY - JOUR A1 - Rath, V. A1 - Mottaghy, Darius T1 - Smooth inversion for ground surface temperature histories: estimating the optimum regularization parameter by generalized cross-validation JF - Geophysical Journal International Y1 - 2007 U6 - https://doi.org/10.1111/j.1365-246X.2007.03587.x SN - 1365-246X VL - 171 IS - 3 SP - 1440 EP - 1448 ER - TY - JOUR A1 - Mottaghy, Darius A1 - Vosteen, Hans-Dieter A1 - Schellschmidt, Rüdiger T1 - Temperature dependence of the relationship of thermal diffusivity versus thermal conductivity for crystalline rocks JF - International Journal of Earth Sciences Y1 - 2008 U6 - https://doi.org/10.1007/s00531-007-0238-3 SN - 1437-3262 VL - 97 IS - 2 SP - 435 EP - 442 ER - TY - JOUR A1 - Vogt, C. A1 - Mottaghy, Darius A1 - Rath, V. A1 - Marquart, G. A1 - Dijkshoorn, L. A1 - Wolf, A. A1 - Clauser, C. T1 - Vertical variation in heat flow on the Kola Peninsula: palaeoclimate or fluid flow? JF - Geophysical Journal International N2 - Following earlier studies, we present forward and inverse simulations of heat and fluid transport of the upper crust using a local 3-D model of the Kola area. We provide best estimates for palaeotemperatures and permeabilities, their errors and their dependencies. Our results allow discriminating between the two mentioned processes to a certain extent, partly resolving the non-uniqueness of the problem. We find clear indications for a significant contribution of advective heat transport, which, in turn, imply only slightly lower ground surface temperatures during the last glacial maximum relative to the present value. These findings are consistent with the general background knowledge of (i) the fracture zones and the corresponding fluid movements in the bedrock and (ii) the glacial history of the Kola area. Y1 - 2014 U6 - https://doi.org/10.1093/gji/ggu282 SN - 1365-246X VL - 199 IS - 2 SP - 829 EP - 843 PB - Oxford University Press CY - Oxford ER - TY - JOUR A1 - Chen, Tao A1 - Clauser, Christoph A1 - Marquart, Gabriele A1 - Willbrand, Karen A1 - Mottaghy, Darius T1 - A new upscaling method for fractured porous media JF - Advances in Water Resources Y1 - 2015 U6 - https://doi.org/10.1016/j.advwatres.2015.03.009 SN - 0309-1708 N1 - Corrigendum 2019: https://doi.org/10.1016/j.advwatres.2019.01.004 VL - 80 SP - 60 EP - 68 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kürten, Sylvia A1 - Mottaghy, Darius A1 - Ziegler, Martin T1 - A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances JF - Acta Geotechnica Y1 - 2015 U6 - https://doi.org/10.1007/s11440-014-0311-6 SN - 1861-1133 VL - 10 IS - 2 SP - 219 EP - 229 PB - Springer CY - Berlin ER - TY - JOUR A1 - Kürten, Sylvia A1 - Mottaghy, Darius A1 - Ziegler, Martin T1 - Design of plane energy geostructures based on laboratory tests and numerical modelling JF - Energy and Buildings Y1 - 2015 U6 - https://doi.org/10.1016/j.enbuild.2015.08.039 SN - 0378-7788 VL - 107 SP - 434 EP - 444 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Srivastava, A. A1 - Lahiri, S. A1 - Maiti, M. A1 - Knolle, F. A1 - Hoyler, Friedrich A1 - Scherer, Ulrich W. A1 - Schnug, E. W. T1 - Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India JF - Journal of Radioanalytical and Nuclear Chemistry Y1 - 2014 U6 - https://doi.org/0.1007/s10967-014-3450-1 SN - 1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print) VL - 2014 IS - 302 SP - 1049 EP - 1052 PB - Springer Nature CY - Basel ER - TY - JOUR A1 - Marx, Ulrich A1 - Schenk, Friedrich A1 - Behrens, Jan A1 - Meyr, Ulrike A1 - Wanek, Paul A1 - Zang, Werner A1 - Schmitt, Robert A1 - Brüstle, Oliver A1 - Zenke, Martin A1 - Klocke, Fritz T1 - Automatic production of induced pluripotent stem cells JF - Procedia CIRP : First CIRP Conference on BioManufacturing Y1 - 2013 SN - 2212-8271 VL - Vol. 5 SP - 2 EP - 6 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Edip, K. A1 - Sesov, V. A1 - Butenweg, Christoph A1 - Bojadjieva, J. T1 - Development of coupled numerical model for simulation of multiphase soil JF - Computers and Geotechnics N2 - In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed. Y1 - 2018 U6 - https://doi.org/10.1016/j.compgeo.2017.08.016 SN - 0266-352X VL - 96 SP - 118 EP - 131 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Marinkovic, Marko A1 - Butenweg, Christoph T1 - Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames JF - Engineering Structures N2 - Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill walls prone to damage during earthquakes. Interstory deformations lead to an interaction between the infill and the RC frame, which affects the structural response. The result of this interaction is significant damage to the infill wall and sometimes to the surrounding structural system too. In most design codes, infill walls are considered as non-structural elements and neglected in the design process, because taking into account the infills and considering the interaction between frame and infill in software packages can be complicated and impractical. A good way to avoid negative aspects arising from this behavior is to ensure no or low-interaction of the frame and infill wall, for instance by decoupling the infill from the frame. This paper presents the numerical study performed to investigate new connection system called INODIS (Innovative Decoupled Infill System) for decoupling infill walls from surrounding frame with the aim to postpone infill activation to high interstory drifts thus reducing infill/frame interaction and minimizing damage to both infills and frames. The experimental results are first used for calibration and validation of the numerical model, which is then employed for investigating the influence of the material parameters as well as infill’s and frame’s geometry on the in-plane behaviour of the infilled frames with the INODIS system. For all the investigated situations, simulation results show significant improvements in behaviour for decoupled infilled RC frames in comparison to the traditionally infilled frames. KW - Seismic loading KW - Earthquake KW - In-plane performance, isolation KW - Infill wall design KW - Numerical modelling Y1 - 2022 U6 - https://doi.org/10.1016/j.engstruct.2022.114959 SN - 0141-0296 VL - 272 IS - 1 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Baumgartner, Werner A1 - Fidler, Florian A1 - Weth, Agnes A1 - Habbecke, Martin A1 - Jakob, Peter A1 - Butenweg, Christoph A1 - Böhme, Wolfgang T1 - Investigating the locomotion of the sandfish in desert sand using NMR-Imaging JF - PLOS ONE N2 - The sandfish (Scincus scincus) is a lizard having the remarkable ability to move through desert sand for significant distances. It is well adapted to living in loose sand by virtue of a combination of morphological and behavioural specializations. We investigated the bodyform of the sandfish using 3D-laserscanning and explored its locomotion in loose desert sand using fast nuclear magnetic resonance (NMR) imaging. The sandfish exhibits an in-plane meandering motion with a frequency of about 3 Hz and an amplitude of about half its body length accompanied by swimming-like (or trotting) movements of its limbs. No torsion of the body was observed, a movement required for a digging-behaviour. Simple calculations based on the Janssen model for granular material related to our findings on bodyform and locomotor behaviour render a local decompaction of the sand surrounding the moving sandfish very likely. Thus the sand locally behaves as a viscous fluid and not as a solid material. In this fluidised sand the sandfish is able to “swim” using its limbs. KW - magnetic resonance imaging KW - body limbs KW - swimming KW - lizards KW - deserts Y1 - 2008 U6 - https://doi.org/10.1371/journal.pone.0003309 SN - 1932-6203 VL - 3 IS - 10 PB - Plos CY - San Francisco, California, US ER - TY - JOUR A1 - Alexopoulos, Spiros A1 - Breitbach, Gerd A1 - Hoffschmidt, Bernhard A1 - Stobbe, P. T1 - Optimization of the geometry of porous SiC ceramic filtering modules using numerical methods JF - Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21 - 26, 2007, Daytona Beach, Florida ; [papers presented at the Symposium on Porous Ceramics: Novel Developments and Applications] / ed.: Manuel Brito ... Vol. ed.: Jonathan Salem ... The American Ceramics Society Y1 - 2008 SN - 9780470196403 N1 - Ceramic engineering and science proceedings ; 28,9 SP - 95 EP - 104 PB - Wiley CY - Hoboken, NJ ER - TY - JOUR A1 - Giresini, Linda A1 - Sassu, Mauro A1 - Butenweg, Christoph A1 - Alecci, Valerio A1 - De Stefano, Mario T1 - Vault macro-element with equivalent trusses in global seismic analyses JF - Earthquakes and Structures N2 - This paper proposes a quick and simplified method to describe masonry vaults in global seismic analyses of buildings. An equivalent macro-element constituted by a set of six trusses, two for each transverse, longitudinal and diagonal direction, is introduced. The equivalent trusses, whose stiffness is calculated by fully modeled vaults of different geometry, mechanical properties and boundary conditions, simulate the vault in both global analysis and local analysis, such as kinematic or rocking approaches. A parametric study was carried out to investigate the influence of geometrical characteristics and mechanical features on the equivalent stiffness values. The method was numerically validated by performing modal and transient analysis on a three naves-church in the elastic range. Vibration modes and displacement time-histories were compared showing satisfying agreement between the complete and the simplified models. This procedure is particularly useful in engineering practice because it allows to assess, in a simplified way, the effectiveness of strengthening interventions for reducing horizontal relative displacements between vault supports. KW - vault KW - macro-element KW - equivalent stiffness KW - truss KW - churches Y1 - 2017 U6 - https://doi.org/10.12989/eas.2017.12.4.409 SN - 2092-7614 (Print) SN - 2092-7622 (Online) VL - 12 IS - 4 SP - 409 EP - 423 PB - Techno-Press CY - Taejŏn ER - TY - JOUR A1 - Chudoba, Rostislav A1 - Butenweg, Christoph A1 - Peiffer, F. T1 - Technical information system for collaborative material research JF - Advances in engineering software Y1 - 2004 U6 - https://doi.org/10.1016/j.advengsoft.2004.03.021 SN - 1873-5339 (E-Journal); 0965-9978 (Print) VL - Volume 35 IS - Issue 10-11 SP - 747 EP - 756 ER - TY - JOUR A1 - Alexopoulos, Spiros A1 - Hoffschmidt, Bernhard T1 - Solar tower power plant in Germany and future perspectives of the development of the technology in Greece and Cyprus JF - Renewable Energy . 35 (2010), H. 7 Y1 - 2010 SN - 0960-1481 SP - 1352 EP - 1356 ER -