TY  - CHAP
A1  - Walter, Michael
A1  - Gligorevic, Snjezana
A1  - Detert, Thorben
A1  - Schnell, Michael
T1  - UHF/VHF air-to-air propagation measurements
T2  - Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain
Y1  - 2010
SN  - 978-1-4244-6431-9 ; 978-84-7653-472-4
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Usai, Pierpaolo
A1  - Corucci, Alessandro
A1  - Gligorevic, Snjezana
A1  - Monorchio, Agostino
T1  - Estimation of airport surface propagation channel: ray tracing model and measurements
T2  - Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP) : 11 - 15 April 2011, Rome, Italy
Y1  - 2011
SN  - 978-1-4577-0250-1
SP  - 1634
EP  - 1638
ER  - 
TY  - CHAP
A1  - Hadinejad-Mahram, Hafez
A1  - Gligorevic, Snjezana
A1  - Ritscher, Matthias
T1  - Joint iterative channel estimation and parallel interference cancellation for coded DS-CDMA
T2  - Proceeding of the International Conference on Telecommunications 2002 : [Beijing, 23 - 26 June 2002]. Vol. 2
Y1  - 2002
SP  - 566
EP  - 570
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
A1  - Bott, Rainer
A1  - Sorger, Ulrich
ED  - Fazel, Khaled
T1  - Equalization for multi-carrier systems in time-varying channels
T2  - Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003
Y1  - 2004
SN  - 1402018371
SP  - 251
EP  - 258
ER  - 
TY  - JOUR
A1  - Gligorevic, Snjezana
T1  - Joint channel estimation and equalisation of fast time-varying frequency-selective channels
JF  - European transactions on telecommunications
Y1  - 2008
SN  - 1541-8251; 2161-3915; 1120-3862; 1124-318X
VL  - Vol. 19
IS  - Iss. 1
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Land, Ingmar
A1  - A., Peter
A1  - Gligorevic, Snjezana
T1  - Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts
T2  - 5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)
Y1  - 2004
SN  - 3-8007-2802-8
SP  - 195
EP  - 202
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Gligorevic, Snjezana
T1  - Airport surface propagation channel in the C-Band: measurements and modeling
JF  - IEEE transactions on antennas and propagation
Y1  - 2013
SN  - 0018-926x
VL  - Vol. 61
IS  - Iss. 9
SP  - 4792
EP  - 4802
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
T1  - Stochastic modeling of non-stationary channels
T2  - 7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden
Y1  - 2013
SN  - 978-1-4673-2187-7 ; 978-88-907018-1-8
SP  - 1677
EP  - 1681
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
A1  - McPhillips, Graeme
A1  - Potgieter, Anet
T1  - RoboCup Standard Platform League - Team Zadeat : an intercontinental research effort
Y1  - 2008
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Priede, Gareth
A1  - Ferrein, Alexander
T1  - Towards passive walking for the fully-actuated biped robot Nao
T2  - Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)
N2  - Many biped robots deploy a form of gait that follows the zero moment point (ZMP) approach, that is, the robot is in a stable position at any point in time. This requires the robot to be fully actuated. While very stable, the draw-backs of this approach are a fairly slow gait and high energy consumption. An alternative approach is the so-called passive-dynamic walking, where the gait makes use of the inertia and dynamic stability of the robot. In this paper we describe our ongoing work of combining the principles of passive-dynamic walking on the fully-actuated biped robot Nao, which is also deployed for robotic soccer applications. We present a simple controller that allows the robot to stably rock sidewards, showing a closed limit-cycle. We discuss first results of superimposing a forward motion on the sidewards motion. Based on this we expect to endow the Nao with a fast, robust, and stable passive-dynamic walk on the fully-actuated Nao in the future.
Y1  - 2013
SN  - 978-1-4614-3557-0 ; 978-1-4614-3558-7
U6  - http://dx.doi.org/10.1007/978-1-4614-3558-7_18
SP  - 225
EP  - 236
PB  - Springer
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
A1  - McPhillips, Graeme
A1  - Potgieter, Anet
T1  - Establishing the RoboCup Standard League in Africa - applying for the RoboCup Standard League with a German-Austrian-South African Research Project
Y1  - 2007
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Vorst, Phillip
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - AllemaniACs3D team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Beck, Daniel
A1  - Buchleitner, Martin
A1  - Ferrein, Alexander
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
T1  - Mostly Harmless & AllemaniACs - mixed innovations
Y1  - 2014
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
A1  - McPhillips, Graeme
A1  - Niemüller, Tim
A1  - Potgieter, Anet
T1  - Team Zadeat 2009 : team report
Y1  - 2009
VL  - 6
SP  - 1
ER  - 
TY  - CHAP
A1  - Wang, W.
A1  - Mensing, C.
A1  - Gligorevic, Snjezana
A1  - Jost, T.
A1  - Dammann, A.
T1  - Short term statistical analysis of outdoor to indoor propagation channel for geolocations
T2  - Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts
Y1  - 2008
SP  - 85
EP  - 89
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Boots, Byron
T1  - Incremental task-level reasoning in a competitive factory automation scenario
T2  - Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)
Y1  - 2013
SN  - 9781577356011
SP  - 43
EP  - 48
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Fuzzy representations and control for domestic service robots in Golog
T2  - Intelligent robotics and applications : 4th International conference, ICIRA 2011, Aachen, Germany, December 6-8, 2011, proceedings, part I. (Lecture notes in computer science ; 7102)
Y1  - 2011
SN  - 978-3-642-25486-4
SP  - 241
EP  - 250
ER  - 
TY  - CHAP
A1  - Dylla, Frank
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - AllemaniACs 2003 team description
T2  - RoboCup 2003 : Robot Soccer World Cup VII
Y1  - 2003
SP  - 1
EP  - 3
ER  - 
TY  - BOOK
A1  - Hüning, Felix
T1  - The fundamentals of electrical engineering for mechatronics
Y1  - 2014
SN  - 978-3-11-034991-7 (Druckausg.)
SN  - 978-3-11-030840-2 (E-Book)
PB  - de Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ewert, Daniel
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - RoboCup logistics league sponsored by festo: A competitive factory automation testbed
T2  - RoboCup 2013: Robot World Cup XVII :  Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)
N2  - A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.
Y1  - 2014
SN  - 978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)
SP  - 336
EP  - 347
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Holtrup, S.
A1  - Sadeghfam, Arash
A1  - Heuermann, Holger
A1  - Awakowicz, P.
T1  - Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters
JF  - IEEE transactions on microwave theories and techniques
N2  - High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.
Y1  - 2014
U6  - http://dx.doi.org/10.1109/TMTT.2014.2342652
SN  - 0018-9480
VL  - 62
IS  - 10
SP  - 2471
EP  - 2480
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - IR stereo kinect: improving depth images by combining structured light with IR stereo
Y1  - 2014
SP  - 1
EP  - 9
ER  - 
TY  - PAT
A1  - Nötzold, K.
A1  - Bragard, Michael
A1  - Fink, K.
A1  - Griessel, R.
A1  - Wegener, R.
T1  - Cascaded H-bridge converter with transformer based cell power balancing in each voltage level  : [Patentschrift]
Y1  - 2014
N1  - Titel des US-Patents: Bypassed cascaded cell converter : [patent of invention]. - Außerdem veröffentlicht als CN103997231 (A)
PB  - Europäisches Patentamt / United States Patent and Trademark Office [u.a.]
CY  - Den Haag / Alexandria, VA
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Ronge, C.
A1  - De Doncker, R. W.
T1  - Sandwich design of high-power thyristor based devices with integrated MOSFET structure
T2  - Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom
Y1  - 2011
SN  - 978-1-61284-167-0 (Print)
SN  - 978-90-75815-15-3 (Online)
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance
JF  - IEEE transactions on power electronics
N2  - This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.
Y1  - 2012
U6  - http://dx.doi.org/10.1109/TPEL.2012.2189136
SN  - 0885-8993
VL  - 27
IS  - 9
SP  - 4163
EP  - 4171
PB  - IEEE
CY  - New York
ER  - 
TY  - THES
A1  - Bragard, Michael
T1  - The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beiträge des ISEA ; 62)
N2  - This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.
Y1  - 2012
SN  - 978-3-8440-1152-4
N1  - Zugl.: Aachen, Techn. Hochsch., Diss., 2012
PB  - Shaker
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
A1  - Soter, S.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - 15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]
Y1  - 2013
SN  - 978-1-4799-0115-9 (Online-Ausg.)
U6  - http://dx.doi.org/10.1109/EPE.2013.6634752
SP  - 1037
EP  - 1042
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Soter, S.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - EPE Joint Wind Energy and T&D Chapters Seminar : 28th and 29th of June 2012, in the Utzon Centre, Aalborg, Denmark ; papers, posters, presentations. - Session 2: Grid connection, compliance
Y1  - 2012
PB  - EPE Association
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Köllensperger, P.
A1  - Bragard, Michael
A1  - Plum, T.
A1  - De Doncker, R. W.
T1  - The dual GCT : a new high-power device using optimized GCT technology
T2  - Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA
Y1  - 2007
SN  - 978-1-4244-1260-0 (Online)
SN  - 978-1-4244-1259-4 (Print)
U6  - http://dx.doi.org/10.1109/07IAS.2007.76
SP  - 358
EP  - 365
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Köllensperger, P.
A1  - Bragard, Michael
A1  - Plum, T.
A1  - De Doncker, R. W.
T1  - The dual GCT : new high-power device using optimized GCT technology
JF  - IEEE transactions on industry applications
Y1  - 2009
U6  - http://dx.doi.org/10.1109/TIA.2009.2027364
SN  - 0093-9994
VL  - 45
IS  - 5
SP  - 1754
EP  - 1762
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618410
SP  - 4551
EP  - 4557
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off
JF  - IEEE transactions on industry applications
Y1  - 2011
U6  - http://dx.doi.org/10.1109/TIA.2011.2161432
SN  - 0093-9994
VL  - 47
IS  - 5
SP  - 2175
EP  - 2182
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
T1  - Towards a mobile mapping robot for underground mines
T2  - 7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town
Y1  - 2014
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - IR stereo kinect: improving depth images by combining structured light with IR stereo
T2  - PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)
N2  - RGB-D sensors such as the Microsoft Kinect or the Asus Xtion are inexpensive 3D sensors. A depth image is computed by calculating the distortion of a known infrared light (IR) pattern which is projected into the scene. While these sensors are great devices they have some limitations. The distance they can measure is limited and they suffer from reflection problems on transparent, shiny, or very matte and absorbing objects. If more than one RGB-D camera is used the IR patterns interfere with each other. This results in a massive loss of depth information. In this paper, we present a simple and powerful method to overcome these problems. We propose a stereo RGB-D camera system which uses the pros of RGB-D cameras and combine them with the pros of stereo camera systems. The idea is to utilize the IR images of each two sensors as a stereo pair to generate a depth map. The IR patterns emitted by IR projectors are exploited here to enhance the dense stereo matching even if the observed objects or surfaces are texture-less or transparent. The resulting disparity map is then fused with the depth map offered by the RGB-D sensor to fill the regions and the holes that appear because of interference, or due to transparent or reflective objects. Our results show that the density of depth information is increased especially for transparent, shiny or matte objects.
Y1  - 2014
SN  - 978-3-319-13559-5 (Print) ; 978-3-319-13560-1 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-13560-1_33
SP  - 409
EP  - 421
PB  - Springer
CY  - München
ER  - 
TY  - PAT
A1  - Bragard, Michael
A1  - Budde, W. O.
A1  - Hente, D.
A1  - Jacobs, J. H. A. M.
A1  - Waffenschmidt, E.
T1  - Lighting system : [patent of invention]
T1  - Beleuchtungssystem : [Patentschrift]
Y1  - 2008
N1  - Außerdem veröffentlicht als: TW200817630 (A), TWI402458 (B),  RU2009106047 (A), RU2440636 (C2), KR20090042806 (A), KR101423467 (B1), JP2009545103 (A), JP5265540 (B2), CN101490772 (A) und  CN101490772 (B)
PB  - WIPO / United States Patent and Trademark Office
CY  - Geneva / Alexandria, VA
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
A1  - Ritz, Thomas
A1  - Siekmann, Kirsten
A1  - Wallenborn, Ramona
ED  - Demmer, Axel
T1  - Additive manufacturing businesses in the process chain of individualized mass products
T2  - DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference
Y1  - 2014
SN  - 978-3-8396-9128-1 (E-Book)
PB  - Fraunhofer
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - http://dx.doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Finger, Torsten
T1  - 2.45 GHz Plasma Powered Spark Plug by Thermal and EM-Optimization
Y1  - 2014
N1  - Ansys High Frequency Simulation Conference - AHFSC 2014, Munich; 02/2014
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Obaidat, Mohammad S.
T1  - Usability of mobile applications : dissemination of usability engineering in small and medium enterprises
T2  - Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]
Y1  - 2012
SN  - 978-989-8565-23-5
N1  - Nebentitel: DCNET; ICE-B; OPTICS
SP  - 272
EP  - 277
PB  - SciTePress
CY  - [Lissabon]
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Ritz, Thomas
A1  - Strauch, Jakob
T1  - Adaption of archetype patterns for mobile cloud-based business apps
T2  - 2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011
Y1  - 2011
SN  - 978-1-61284-938-6 (Print)
SN  - 978-1-61284-936-2 (E-Book)
U6  - http://dx.doi.org/10.1109/PERCOMW.2011.5766849
SP  - 100
EP  - 105
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ellerweg, Roland
A1  - Ritz, Thomas
ED  - Roth, Jörg
T1  - Tool supported requirements analysis for the user centered development of mobile enterprise software
T2  - Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands
N2  - A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.
Y1  - 2008
SN  - 978-972-8924-62-1
SP  - 160
EP  - 162
PB  - IADIS Press
CY  - [Lisboa]
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
T1  - Electrodeless low pressure lamp with bi-static matching at 2.45 GHz
T2  - 2013 European Microwave Conference (EuMC) , Nuremberg
Y1  - 2013
SN  - 978-1-4799-0264-4
SP  - 881
EP  - 884
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Holtrup, S.
T1  - Investigation on efficacy optimization of RF-driven automotive D-lamps
T2  - 44th European Microwave Conference (EuMC),2014, Rome
Y1  - 2014
U6  - http://dx.doi.org/10.1109/EuMC.2014.6986645
SP  - 1154
EP  - 1157
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Finger, Torsten
ED  - Günther, Michael
T1  - Microwave Spark Plug for Very High-Pressure Conditions
T2  - Ignition systems for gasoline engines
Y1  - 2014
SP  - 269
EP  - 282
PB  - DCM Druck
CY  - Meckenheim
ER  - 
TY  - JOUR
A1  - Klinge, Uwe
A1  - Otto, Jens
A1  - Mühl, Thomas
T1  - High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain
JF  - BioMed Research International
Y1  - 2015
U6  - http://dx.doi.org/10.1155/2015/953209
SN  - 2314-6133 (Print)
SN  - 2314-6141 (Online)
N1  - Article ID: 953209
VL  - 2015
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Power semiconductors : key components for HEV/EV
T2  - FISITA 2014 World Automotive Congress : 2 - 6 June, Maastricht, the Netherlands International Federation of Automotive Engineering Societies
Y1  - 2014
N1  - Datenformat: PDF
PB  - KIVI
CY  - [s.l.]
ER  -