TY  - JOUR
A1  - Schusser, Sebastian
A1  - Menzel, S.
A1  - Bäcker, Matthias
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Degradation of thin poly(lactic acid) films: characterization by capacitance-voltage, atomic force microscopy, scanning electron microscopy and contact-angle measurements
JF  - Electrochimica Acta
Y1  - 2013
SN  - 1873-3859 (E-Journal); 0013-4686 (Print)
VL  - Vol. 113
SP  - 779
EP  - 784
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Digel, Ilya
A1  - Dachwald, Bernd
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Funke, O.
T1  - A concept of a probe for particle analysis and life detection in icy environments
Y1  - 2009
N1  - International workshop “Europa lander: science goals and experiments”, Space Research Institute (IKI), Moscow, Russia
9-13 February 2009
SP  - 1
EP  - 24
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Koch, Claudia
A1  - Eiben, Sabine
A1  - Geiger, Fania
A1  - Eber, Fabian
A1  - Gliemann, Hartmut
A1  - Poghossian, Arshak
A1  - Wege, Christina
A1  - Schöning, Michael Josef
T1  - Tobacco mosaic virus as enzyme nanocarrier for electrochemical biosensors
JF  - Sensors and Actuators B: Chemical
N2  - The conjunction of (bio-)chemical recognition elements with nanoscale biological building blocks such as virus particles is considered as a very promising strategy for the creation of biohybrids opening novel opportunities for label-free biosensing. This work presents a new approach for the development of biosensors using tobacco mosaic virus (TMV) nanotubes or coat proteins (CPs) as enzyme nanocarriers. Sensor chips combining an array of Pt electrodes loaded with glucose oxidase (GOD)-modified TMV nanotubes or CP aggregates were used for amperometric detection of glucose as a model system for the first time. The presence of TMV nanotubes or CPs on the sensor surface allows binding of a high amount of precisely positioned enzymes without substantial loss of their activity, and may also ensure accessibility of their active centers for analyte molecules. Specific and efficient immobilization of streptavidin-conjugated GOD ([SA]-GOD) complexes on biotinylated TMV nanotubes or CPs was achieved via bioaffinity binding. These layouts were tested in parallel with glucose sensors with adsorptively immobilized [SA]-GOD, as well as [SA]-GOD crosslinked with glutardialdehyde, and came out to exhibit superior sensor performance. The achieved results underline a great potential of an integration of virus/biomolecule hybrids with electronic transducers for future applications in biosensorics and biochips.
Y1  - 2017
U6  - https://doi.org/10.1016/j.snb.2016.07.096
SN  - 0925-4005
VL  - 238
SP  - 716
EP  - 722
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Kramer, F.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bratov, A.
A1  - Abramova, N.
A1  - Schöning, Michael Josef
T1  - Planar and 3D interdigitated electrodes for biosensing applications: The impact of a dielectric barrier on the sensor properties
JF  - Physica Status Solidi (A) - Applications and Materials Science
N2  - Planar and three-dimensional (3D) interdigitated electrodes (IDE) with electrode digits separated by an insulating barrier of different heights were electrochemically characterized and compared in terms of their sensing properties. Due to the impact of the surface resistance, both types of IDE structures display a non-linear behavior in low-ionic strength solutions. The experimental data were fitted to an electrical equivalent circuit and interpreted taking into account the surface-charge-governed properties. The effect of a charged polyelectrolyte layer electrostatically assembled onto the sensor surface on the surface resistance in solutions with different KCl concentration is studied. In case of the same electrode footprint, 3D-IDEs show a larger cell constant and a higher sensitivity to molecular adsorption than that of planar IDEs. The obtained results demonstrate the potential of 3D-IDEs as a new transducer structure for a direct label-free sensing of charged molecules.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330416
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1357
EP  - 1363
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Weil, M. H.
A1  - Bäcker, Matthias
A1  - Mayer, D.
A1  - Schöning, Michael Josef
T1  - Field-effect Devices Functionalised with Gold-Nanoparticle/Macromolecule Hybrids: New Opportunities for a Label-Free Biosensing
JF  - Procedia Engineering
N2  - Field-effect capacitive electrolyte-insulator-semiconductor (EIS) sensors functionalised with citrate-capped gold nanoparticles (AuNP) have been used for the electrostatic detection of macromolecules by their intrinsic molecular charge. The EIS sensor detects the charge changes in the AuNP/macromolecule hybrids induced by the adsorption or binding events. A feasibility of the proposed detection scheme has been exemplary demonstrated by realising EIS sensors for the detection of poly-D-lysine molecules.
Y1  - 2012
U6  - https://doi.org/10.1016/j.proeng.2012.09.136
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 273
EP  - 276
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Moseley, Fiona
A1  - Halamek, Jan
A1  - Kramer, Friederike
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible CNOT logic gate realized in a flow system
JF  - Analyst
N2  - An enzyme system organized in a flow device was used to mimic a reversible Controlled NOT (CNOT) gate with two input and two output signals. Reversible conversion of NAD⁺ and NADH cofactors was used to perform a XOR logic operation, while biocatalytic hydrolysis of p-nitrophenyl phosphate resulted in an Identity operation working in parallel. The first biomolecular realization of a CNOT gate is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
Y1  - 2014
U6  - https://doi.org/10.1039/C4AN00133H
SN  - 1364-5528 (E-Journal) ; 0003-2654 (Print)
VL  - 139
IS  - 8
SP  - 1839
EP  - 1842
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Werner, Moritz
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
T1  - Capacitance–voltage and impedance-spectroscopy characteristics of nanoplate EISOI capacitors
JF  - Physica status solidi (a) : applications and material science. 208 (2011), H. 6
Y1  - 2011
SN  - 1862-6319
SP  - 1327
EP  - 1332
PB  - Wiley-VCH
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Kallweit, Stephan
T1  - The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe
T2  - ROBOT 2017: Third Iberian Robotics Conference
Y1  - 2018
SN  - 978-3-319-70836-2
U6  - https://doi.org/10.1007/978-3-319-70836-2_31
N1  - Advances in Intelligent Systems and Computing, vol 694;
(AISC, volume 694)
SP  - 370
EP  - 381
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Reke, Michael
A1  - Peter, Daniel
A1  - Schulte-Tigges, Joschua
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Walter, Thomas
A1  - Matheis, Dominik
T1  - A Self-Driving Car Architecture in ROS2
T2  - 2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa
N2  - In this paper we report on an architecture for a self-driving car that is based on ROS2. Self-driving cars have to take decisions based on their sensory input in real-time, providing high reliability with a strong demand in functional safety. In principle, self-driving cars are robots. However, typical robot software, in general, and the previous version of the Robot Operating System (ROS), in particular, does not always meet these requirements. With the successor ROS2 the situation has changed and it might be considered as a solution for automated and autonomous driving. Existing robotic software based on ROS was not ready for safety critical applications like self-driving cars. We propose an architecture for using ROS2 for a self-driving car that enables safe and reliable real-time behaviour, but keeping the advantages of ROS such as a distributed architecture and standardised message types. First experiments with an automated real passenger car at lower and higher speed-levels show that our approach seems feasible for autonomous driving under the necessary real-time conditions.
Y1  - 2020
SN  - 978-1-7281-4162-6
U6  - https://doi.org/10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020
N1  - 2020 International SAUPEC/RobMech/PRASA Conference, 29-31 Jan. 2020, Cape Town, South Africa
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Yoshinobu, Tatsuo
A1  - Krause, Steffi
A1  - Miyamoto, Ko-ichiro
A1  - Werner, Frederik
A1  - Poghossian, Arshak
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - (Bio-)chemical Sensing and Imaging by LAPS and SPIM
T2  - Label-free biosensing: advanced materials, devices and applications
N2  - The light-addressable potentiometric sensor (LAPS) and scanning photo-induced impedance microscopy (SPIM) are two closely related methods to visualise the distributions of chemical species and impedance, respectively, at the interface between the sensing surface and the sample solution. They both have the same field-effect structure based on a semiconductor, which allows spatially resolved and label-free measurement of chemical species and impedance in the form of a photocurrent signal generated by a scanning light beam. In this article, the principles and various operation modes of LAPS and SPIM, functionalisation of the sensing surface for measuring various species, LAPS-based chemical imaging and high-resolution sensors based on silicon-on-sapphire substrates are described and discussed, focusing on their technical details and prospective applications.
KW  - Chemical imaging
KW  - Field-effect device
KW  - Light-addressable potentiometric sensor
KW  - Potentiometry
Y1  - 2018
SN  - 978-3-319-75219-8
SP  - 103
EP  - 132
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Micili, Serap C.
A1  - Valter, Markus
A1  - Oflaz, Hakan
A1  - Ozogul, Candan
A1  - Linder, Peter
A1  - Föckler, Nicole
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - Optical coherence tomography : a potential tool to predict premature rupture of fetal membranes
JF  - Proceedings of the Institution of Mechanical Engineers. Part H : Journal of engineering in medicine
Y1  - 2013
SN  - 0046-2039 (Print) ; 2041-3033 (E-Journal)
VL  - Vol. 227
IS  - No. 4
SP  - 393
EP  - 401
PB  - Sage
CY  - London
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Tran, Thanh Ngoc
A1  - Matthies, Hermann G.
A1  - Stavroulakis, Georgios Eleftherios
A1  - Staat, Manfred
T1  - FEM Shakedown of uncertain structures by chance constrained programming
T2  - PAMM Proceedings in Applied Mathematics and Mechanics
Y1  - 2016
U6  - https://doi.org/10.1002/pamm.201610346
SN  - 1617-7061
N1  - Special Issue:
Joint 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung
VL  - 16
IS  - 1
SP  - 715
EP  - 716
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - A 14 W SPST Switch with Four PIN-Diodes In a 0402-SMD-Package
Y1  - 2008
SN  - 978-3-8007-3086-5
N1  - Microwave Conference (GeMIC), 2008 German
SP  - 318
EP  - 321
ER  - 
TY  - BOOK
A1  - Laack, Walter van
T1  - To perceive the world with logic
BT  - Walter van Laack. [Transl. by Anneliese Wolstenholme] / 1. ed.
Y1  - 2007
SN  - 978-3-936624-08-3
N1  - Dt. Ausg. u.d.T.: Mit Logik die Welt begreifen ; auch als E-Book ISBN 979-3-936624-09-0
PB  - van Laack
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Biophysical and Engineering Contributions to Plant Research
N2  - Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in–situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.
KW  - Pflanzenphysiologie
KW  - Dattel
KW  - Pflanzenscanner
KW  - plant scanner
KW  - date palm tree
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Lehnertz, Klaus
A1  - Bialonski, Stephan
A1  - Horstmann, Marie-Therese
A1  - Krug, Dieter
A1  - Rothkegel, Alexander
A1  - Staniek, Matthäus
A1  - Wagner, Tobias
T1  - Epilepsy
T2  - Reviews of Nonlinear Dynamics and Complexity, Volume 2
Y1  - 2010
SN  - 9783527628001
U6  - https://doi.org/10.1002/9783527628001.ch5
SP  - 159
EP  - 200
PB  - Wiley-VCH
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
T1  - Silicon-based field-effect devices for (bio-)chemical sensing
JF  - International Conference on Advanced Semiconductor Devices and Microsystems, 2008. ASDAM 2008
Y1  - 2008
SN  - 978-1-4244-2325-5
SP  - 31
EP  - 38
CY  - Smolenice, Slovakia
ER  - 
TY  - CHAP
A1  - Molinnus, Denise
A1  - Hardt, Gabriel
A1  - Käver, Larissa
A1  - Willenberg, Holger S.
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology
T2  - MDPI Proceedings
Y1  - 2017
U6  - https://doi.org/10.3390/proceedings1040506
ER  - 
TY  - JOUR
A1  - Niemüller, Tim
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - A Lua-based Behavior Engine for Controlling the Humanoid Robot Nao
JF  - RoboCup 2009: Robot Soccer World Cup XIII
Y1  - 2010
N1  - Lecture Notes in Computer Science ; 5949
SP  - 240
EP  - 251
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - https://doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Grottke, O.
A1  - Braunschweig, T.
A1  - Philippen, B.
A1  - Gatzweiler, Karl-Heinz
A1  - Gronloh, N.
A1  - Staat, Manfred
A1  - Rossaint, R.
A1  - Tolba, R.
T1  - A New Model for Blunt Liver Injuries in the Swine
JF  - European Surgical Research. 44 (2010), H. 2
Y1  - 2010
SN  - 1421-9921
SP  - 65
EP  - 73
ER  - 
TY  - JOUR
A1  - Jung, Alexander
A1  - Staat, Manfred
T1  - Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue
JF  - GAMM - Mitteilungen der Gesellschaft für Angewandte Mathematik und Mechanik
Y1  - 2019
U6  - https://doi.org/10.1002/gamm.201900002
SN  - 1522-2608
VL  - 42
IS  - 4
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Duong, Minh Tuan
T1  - Smoothed Finite Element Methods for Nonlinear Solid Mechanics Problems: 2D and 3D Case Studies
T2  - Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2
N2  - The Smoothed Finite Element Method (SFEM) is presented as an edge-based and a facebased techniques for 2D and 3D boundary value problems, respectively. SFEMs avoid shortcomings of the standard Finite Element Method (FEM) with lower order elements such as overly stiff behavior, poor stress solution, and locking effects. Based on the idea of averaging spatially the standard strain field of the FEM over so-called smoothing domains SFEM calculates the stiffness matrix for the same number of degrees of freedom (DOFs) as those of the FEM. However, the SFEMs significantly improve accuracy and convergence even for distorted meshes and/or nearly incompressible materials.
Numerical results of the SFEMs for a cardiac tissue membrane (thin plate inflation) and an artery (tension of 3D tube) show clearly their advantageous properties in improving accuracy particularly for the distorted meshes and avoiding shear locking effects.
Y1  - 2016
SP  - 440
EP  - 445
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Bhattarai, Aroj
T1  - Constitutive modeling of female pelvic floor dysfunctions and reconstructive surgeries using prosthetic mesh implants
Y1  - 2018
SN  - 978-3-9818074-8-6
U6  - https://doi.org/10.17185/duepublico/70340
N1  - Duisburg-Essen, Univ., Diss., 2018
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Baade, A.
A1  - Emons, H.
A1  - Schöning, Michael Josef
T1  - Application of ISFET for pH measurements in rain droplets
JF  - Sensors and Actuators B. 76 (2001), H. 1-3
Y1  - 2001
SN  - 0925-4005
SP  - 634
EP  - 638
ER  - 
TY  - JOUR
A1  - Kassab, T.
A1  - Han, Y.
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Schöning, Michael Josef
T1  - Detection of layerby-layer adsorbed polyelectrolytes by means of field-effect based capacitive EIS structures
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1034
EP  - 1035
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Frauenrath, Tobias
A1  - Lyrmann, Andreas
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level
T2  - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel
N2  - Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems
KW  - Building Automation
KW  - Smart Building
KW  - CO2
KW  - Carbon Dioxide
KW  - Education
Y1  - 2023
SN  - 978-3-910103-01-6
U6  - https://doi.org/10.33968/2023.04
N1  - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023.
BTS Connected Buildings & Cities Luxemburg
(Tagungsband unter https://doi.org/10.33968/2023.01)
SP  - 31
EP  - 40
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel Bernhard
T1  - Interfacial velocity estimation in highly aerated stepped spillway flows with a single tip fibre optical probe and Artificial Neural Networks
T2  - 6th IAHR International Junior Researcher and Engineer Workshop on Hydraulic Structures, May 30th to June 1st 2016. Lübeck, Germany
N2  - Air-water flows can be found in different engineering applications: from nuclear engineering to huge hydraulic structures. In this paper, a single tip fibre optical probe has been used to record high frequency (over 1 MHz) phase functions at different locations of a stepped spillway. These phase functions have been related to the interfacial velocities by means of Artificial Neural Networks (ANN) and the measurements of a classical double tip conductivity probe. Special attention has been put to the input selection and the ANN dimensions. Finally, ANN have shown to be able to link the signal rising times and plateau shapes to the air-water interfacial velocity.
Y1  - 2016
U6  - https://doi.org/10.15142/T3Q590
ER  - 
TY  - JOUR
A1  - Ball, Christopher Stephen
A1  - Vögele, Stefan
A1  - Grajewski, Matthias
A1  - Kuckshinrichs, Wilhelm
T1  - E-mobility from a multi-actor point of view: Uncertainties and their impacts
JF  - Technological Forecasting and Social Change
Y1  - 2021
SN  - 0040-1625
U6  - https://doi.org/10.1016/j.techfore.2021.120925
VL  - 170
IS  - Art. 120925
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Buniatyan, V. V.
A1  - Matirosyan, N. W.
A1  - Abouzar, Maryam H.
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
A1  - Schubert, J.
A1  - Khachatryan, V. R.
A1  - Soukiassyan, G. R.
T1  - (Ba,Sr)TiO3 based electrolyte-insulator-semiconductor pHsensors: comparitive study
JF  - Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009
Y1  - 2009
SP  - 71
EP  - 74
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schultze, J. W.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection of (bio-)chemical and physical quantities using an identical transducer principle
JF  - Sensors and Actuators B. 91 (2003), H. 1-3
Y1  - 2003
SN  - 0925-4005
SP  - 83
EP  - 91
ER  - 
TY  - CHAP
A1  - Schulte, Jonas
A1  - Schwager, Christian
A1  - Noureldin, Kareem
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation
T2  - SolarPACES: Solar Power & Chemical Energy Systems
N2  - The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.
KW  - Power plants
KW  - Energy storage
KW  - Associated liquids
Y1  - 2023
SN  - 978-0-7354-4623-6
U6  - https://doi.org/10.1063/5.0148741
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - SolarPACES: SOLAR POWER & CHEMICAL ENERGY SYSTEMS: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27 September–1 October 2021, Online
IS  - 2815 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Statistical Tests Based on Reliability and Precision
JF  - Economic Quality Control : EQC ; international journal for quality and reliability
N2  - The construction of a statistical test is investigated which is based only on “reliability” and “precision” as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct.  However, the quantification of the precision of a statistical test is not at all evident.  Thereforethe paper presents and discusses several approaches.  Moreover the distinction of “nullhypothesis” and “alternative hypothesis” is not necessary any longer.
Y1  - 2012
U6  - https://doi.org/10.1515/eqc-2012-0002
SN  - 1869-6147
VL  - 27
IS  - 1
SP  - 43
EP  - 64
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Jessing, Max P.
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2018.11.019
SN  - 0956-5663
VL  - 126
SP  - 510
EP  - 517
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Malzahn, K.
A1  - Abouzar, Maryam H.
A1  - Mehndiratta, P.
A1  - Katz, E.
A1  - Schöning, Michael Josef
T1  - Integration of biomolecular logic gates with field-effect transducers
JF  - Electrochimica Acta. 56 (2011), H. 26
Y1  - 2011
SN  - 0013-4686
SP  - 9661
EP  - 9665
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Knackstedt, Ralf
A1  - Eggert, Mathias
A1  - Fleischer, Stefan
T1  - The Legal Perspective on Business to Government Reporting - A Conceptual Modeling Approach and Its Application in the Financial Sector
T2  - 45th Hawaii International Conference on System Sciences 2012
Y1  - 2012
SN  - 978-0-7695-4525-7
U6  - https://doi.org/10.1109/HICSS.2012.576
SP  - 2309
EP  - 2318
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Schehl, D.
A1  - Linder, Peter
A1  - Gossmann, Matthias
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Porst, Dariusz
A1  - Preiß, C.
A1  - Kayser, Peter
A1  - Pack, O.
A1  - Temiz Artmann, Aysegül
T1  - Ureplace: development of a bioreactor for in vitro culturing of cell seeded tubular vessels on collagen scaffolds
N2  - The demand of replacements for inoperable organs exceeds the amount of available organ transplants. Therefore, tissue engineering developed as a multidisciplinary field of research for autologous in-vitro organs. Such three dimensional tissue constructs request the application of a bioreactor. The UREPLACE bioreactor is used to grow cells on tubular collagen scaffolds OPTIMAIX Sponge 1 with a maximal length of 7 cm, in order to culture in vitro an adequate ureter replacement. With a rotating unit, (urothelial) cells can be placed homogeneously on the inner scaffold surface. Furthermore, a stimulation is combined with this bioreactor resulting in an orientation of muscle cells. These culturing methods request a precise control of several parameters and actuators. A combination of a LabBox and the suitable software LabVision is used to set and conduct parameters like rotation angles, velocities, pressures and other important cell culture values. The bioreactor was tested waterproof successfully. Furthermore, the temperature controlling was adjusted to 37 °C and the CO2 - concentration regulated to 5 %. Additionally, the pH step responses of several substances showed a perfect functioning of the designed flow chamber. All used software was tested and remained stable for several days.
KW  - Tissue Engineering
KW  - Bioreaktor
KW  - Organkultur
KW  - Harnleiter
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Abouzar, Maryam H.
A1  - Bäcker, Matthias
A1  - Zucolotto, Valtencir
A1  - Poghossian, Arshak
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Carbon nanotubes in nanostructured films: Potential application as amperometric and potentiometric field-effect (bio-)chemical sensors
JF  - physica status solidi (a) . 206 (2009), H. 3
Y1  - 2009
SN  - 1862-6319
N1  - Special Issue: Engineering of Functional Interfaces (EnFI 08)
SP  - 462
EP  - 467
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Maris, Rob J.
A1  - Ackermann, Hans-Josef
A1  - Otto, Ralph
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Handheld measurement device for field-effect sensor structures: Practical evaluation and limitations
JF  - Sensors and Actuators B: Chemical  . 127 (2007), H. 1
Y1  - 2007
SN  - 0925-4005
SP  - 217
EP  - 223
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Ingebrandt, S.
A1  - Poghossian, Arshak
A1  - Zhang, Y.
A1  - Vu, X. T.
A1  - Moritz, W.
A1  - Schöning, Michael Josef
T1  - Nanoplate field-effect capacitive (bio-)chemical sensor array based on SOI structure
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 670
EP  - 673
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Dieckmann, Simon
A1  - Weidle, Mathias
A1  - Dersch, Jürgen
A1  - Teixeira Boura, Cristiano José
A1  - Polklas, Thomas
A1  - Kuschel, Marcus
A1  - Herrmann, Ulf
T1  - Retrofitting of existing parabolic trough collector power plants with molten salt tower systems
T2  - AIP Conference Proceedings
Y1  - 2018
U6  - https://doi.org/10.1063/1.5067030
VL  - 2033
IS  - 1
SP  - 030014-1
EP  - 030014-8
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Schiek, Burkhard
T1  - The In-Fixture Calibration Procedure Line-Network-Network-LNN
JF  - Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]
Y1  - 1992
SN  - 0-946821-23-2
N1  - European Microwave Conference <23, 1993, Madrid>
SP  - 500
EP  - 505
PB  - Reed Exhibition Companies
CY  - Tunbridge Wells
ER  - 
TY  - CHAP
A1  - Golland, Alexander
A1  - Ohrtmann, Jan-Peter
T1  - Video surveillance: The supervisory authorities’ view andrecent case law
T2  - Turning Point in Data Protection Law
Y1  - 2020
SN  - 978-3-8487-6909-4
U6  - https://doi.org/10.5771/9783748921561-175
SP  - 175
EP  - 178
PB  - Nomos
CY  - Baden-Baden
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Leinhos, Marcel
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - An application of field-effect sensors for in-situ monitoring of degradation of biopolymers
JF  - Sensors and actuators B: Chemical
N2  - The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al–p-Si–SiO2–Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).
Y1  - 2015
U6  - https://doi.org/10.1016/j.snb.2014.10.058
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 954
EP  - 959
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Tippkötter, Nils
A1  - Duwe, Anna-Maria
A1  - Wiesen, Sebastian
A1  - Sieker, Tim
A1  - Ulber, Roland
T1  - Enzymatic hydrolysis of beech wood lignocellulose at high solid contents and its utilization as substrate for the production of biobutanol and dicarboxylic acids
JF  - Bioresource Technology
N2  - The development of a cost-effective hydrolysis for crude cellulose is an essential part of biorefinery developments. To establish such high solid hydrolysis, a new solid state reactor with static mixing is used. However, concentrations >10% (w/w) cause a rate and yield reduction of enzymatic hydrolysis. By optimizing the synergetic activity of cellulolytic enzymes at solid concentrations of 9%, 17% and 23% (w/w) of crude Organosolv cellulose, glucose concentrations of 57, 113 and 152 g L⁻¹ are reached. However, the glucose yield decreases from 0.81 to 0.72gg⁻¹ at 17% (w/w). Optimal conditions for hydrolysis scale-up under minimal enzyme addition are identified. As result, at 23% (w/w) crude cellulose the glucose yield increases from 0.29 to 0.49gg⁻¹. As proof of its applicability, biobutanol, succinic and itaconic acid are produced with the crude hydrolysate. The potential of the substrate is proven e.g. by a high butanol yield of 0.33gg⁻¹.
Y1  - 2014
U6  - https://doi.org/10.1016/j.biortech.2014.06.052
VL  - 167
SP  - 447
EP  - 455
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bill, C.
T1  - On the flight performance impact of landing gear drag reduction methods for unmanned air vehicles
JF  - Deutscher Luft- und Raumfahrtkongress 2018
N2  - The flight performance impact of three different landing gear configurations on a small, fixed-wing UAV is analyzed with a combination of RANS CFD calculations and an incremental flight performance algorithm. A standard fixed landing gear configuration is taken as a baseline, while the influence of retracting the landing gear or applying streamlined fairings is investigated. A retraction leads to a significant parasite drag reduction, while also fairings promise large savings. The increase in lift-to-drag ratio is reduced at high lift coefficients due to the influence of induced drag. All configurations are tested on three different design missions with an incremental flight performance algorithm. A trade-off study is performed using the retracted or faired landing gear's weight increase as a variable. The analysis reveals only small mission performance gains as the aerodynamic improvements are negated by weight penalties. A new workflow for decision-making is presented that allows to estimate if a change in landing gear configuration is beneficial for a small UAV.
Y1  - 2018
U6  - https://doi.org/10.25967/480058
PB  - DGLR
CY  - Bonn
ER  -