TY  - CHAP
A1  - Kazuki, Yasuhiro
A1  - Kobayashi, Kaoru
A1  - Hirabayashi, Masumi
A1  - Abe, Satoshi
A1  - Kajitani, Naoyo
A1  - Kazuki, Kanoko
A1  - Takehara, Shoko
A1  - Takiguchi, Masato
A1  - Satoh, Daisuke
A1  - Kuze, Jiro
A1  - Sakuma, Tetsushi
A1  - Kaneko, Takehito
A1  - Mashimo, Tomoji
A1  - Osamura, Minori
A1  - Hashimoto, Mari
A1  - Wakatsuki, Riko
A1  - Hirashima, Rika
A1  - Fujiwara, Ryoichi
A1  - Deguchi, Tsuneo
A1  - Kurihara, Atsushi
A1  - Tsukazaki, Yasuko
A1  - Senda, Naoto
A1  - Yamamoto, Takashi
A1  - Scheer, Nico
A1  - Oshimura, Mitsuo
T1  - Humanized UGT2 and CYP3A transchromosomic rats for improved prediction of human drug metabolism
T2  - PNAS Proceedings of the National Academy of Sciences of the United States of America
Y1  - 2019
U6  - https://doi.org/10.1073/pnas.1808255116
SN  - 1091-6490
VL  - 116
IS  - 8
SP  - 3072
EP  - 3081
ER  - 
TY  - CHAP
A1  - Ketelhut, Maike
A1  - Göll, Fabian
A1  - Braunstein, Bjoern
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Iterative learning control of an industrial robot for neuromuscular training
T2  - 2019 IEEE Conference on Control Technology and Applications
N2  - Effective training requires high muscle forces potentially leading to training-induced injuries. Thus, continuous monitoring and controlling of the loadings applied to the musculoskeletal system along the motion trajectory is required. In this paper, a norm-optimal iterative learning control algorithm for the robot-assisted training is developed. The algorithm aims at minimizing the external knee joint moment, which is commonly used to quantify the loading of the medial compartment. To estimate the external knee joint moment, a musculoskeletal lower extremity model is implemented in OpenSim and coupled with a model of an industrial robot and a force plate mounted at its end-effector. The algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee. The results show that the algorithm is able to minimize the external knee joint moment in all three cases and converges after less than seven iterations.
KW  - Knee
KW  - Training
KW  - Load modeling
KW  - Force
KW  - Iterative learning control
Y1  - 2019
SN  - 978-1-7281-2767-5 (ePub)
SN  - 978-1-7281-2766-8 (USB)
SN  - 978-1-7281-2768-2 (PoD)
U6  - https://doi.org/10.1109/CCTA.2019.8920659
N1  - 2019 IEEE Conference on Control Technology and Applications (CCTA) Hong Kong, China, August 19-21, 2019
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Ketelhut, Maike
A1  - Kolditz, Melanie
A1  - Göll, Fabian
A1  - Braunstein, Bjoern
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Admittance control of an industrial robot during resistance training
JF  - IFAC-PapersOnLine
N2  - Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an 
industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.
KW  - Assistive technology
KW  - Rehabilitation engineering
KW  - Human-Computer interaction
KW  - Automatic control
Y1  - 2019
U6  - https://doi.org/10.1016/j.ifacol.2019.12.102
SN  - 2405-8963
N1  - 14th IFAC Symposium on Analysis, Design, and Evaluation of Human Machine Systems HMS 2019
Tallinn, Estonia, 16–91 September 2019
VL  - 52
IS  - 19
SP  - 223
EP  - 228
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kodomskoi, Leonid
A1  - Kotliar, Konstantin
A1  - Schröder, Andreas
A1  - Weiss, Michael
A1  - Hille, Konrad
T1  - Suture-Probe Canaloplasty as an Alternative to Canaloplasty using the iTrack™ Microcatheter
JF  - Journal of Glaucoma
Y1  - 2019
U6  - https://doi.org/10.1097/IJG.0000000000001321
SN  - 1057-0829
IS  - Epub ahead of print
PB  - Lippincott Williams & Wilkins
CY  - Philadelphia
ER  - 
TY  - JOUR
A1  - Kopp, Alexander
A1  - Schmeets, Ralf
A1  - Gosau, Martin
A1  - Friedrich, Reinhard E.
A1  - Fuest, Sandra
A1  - Behbahani, Mehdi
A1  - Barbeck, Mike
A1  - Rutkowski, Rico
A1  - Burg, Simon
A1  - Kluwe, Lan
A1  - Henningsen, Anders
T1  - Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application
JF  - In Vivo
Y1  - 2019
U6  - https://doi.org/10.21873/invivo.11536
SN  - 1791-7549
VL  - 33
IS  - 3
SP  - 757
EP  - 762
ER  - 
TY  - JOUR
A1  - Kramer, Matthias
A1  - Valero, Daniel
A1  - Chanson, Hubert
A1  - Bung, Daniel Bernhard
T1  - Towards reliable turbulence estimations with phase-detection probes: an adaptive window cross-correlation technique
JF  - Experiments in Fluids
Y1  - 2019
U6  - https://doi.org/10.1007/s00348-018-2650-9
SN  - 1432-1114
VL  - 60
EP  - Article number 2
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Krome, Cornelia
A1  - Höft, Jan
A1  - Sander, Volker
T1  - Clustering time series applied to energy markets
JF  - Energy Informatics
Y1  - 2019
U6  - https://doi.org/10.1186/s42162-019-0076-0
SN  - 2520-8942
VL  - 2
IS  - Article numer 17
SP  - 1
EP  - 20
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbulani
A1  - Kallweit, Stephan
T1  - Quality assurance in metal powder bed fusion via deep-learning-based image classification
JF  - Rapid Prototyping Journal
Y1  - 2019
U6  - https://doi.org/10.1108/RPJ-03-2019-0066
SN  - 1355-2546
VL  - 26
IS  - 2
SP  - 259
EP  - 266
ER  - 
TY  - JOUR
A1  - Kurz, Melanie
T1  - Images of Sweden in Germany: from Sundborn and Bullerby to Ikea
JF  - nomad: the magazine for new design culture, business affairs and contemporary lifestyle
Y1  - 2019
SN  - 2513-0714
IS  - 8
SP  - 136
EP  - 147
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Altherr, Lena
A1  - Simon, Nicolai
A1  - Pelz, Peter F.
T1  - Finding global-optimal gearbox designs for battery electric vehicles
T2  - Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019
N2  - In order to maximize the possible travel distance of battery electric vehicles with one battery charge, it is mandatory to adjust all components of the powertrain carefully to each other. While current vehicle designs mostly simplify the powertrain rigorously and use an electric motor in combination with a gearbox with only one fixed transmission ratio, the use of multi-gear systems has great potential. First, a multi-speed system is able to improve the overall energy efficiency. Secondly, it is able to reduce the maximum momentum and therefore to reduce the maximum current provided by the traction battery, which results in a longer battery lifetime. In this paper, we present a systematic way to generate multi-gear gearbox designs that—combined with a certain electric motor—lead to the most efficient fulfillment of predefined load scenarios and are at the same time robust to uncertainties in the load. Therefore, we model the electric motor and the gearbox within a Mixed-Integer Nonlinear Program, and optimize the efficiency of the mechanical parts of the powertrain. By combining this mathematical optimization program with an unsupervised machine learning algorithm, we are able to derive global-optimal gearbox designs for practically relevant momentum and speed requirements.
KW  - Powertrain
KW  - Gearbox
KW  - Optimization
KW  - BEV
KW  - WLTP
Y1  - 2019
SN  - 978-3-030-21802-7
U6  - https://doi.org/10.1007/978-3-030-21803-4_91
SP  - 916
EP  - 925
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - https://doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Birgel, Stefan
A1  - Hackl, Michael
A1  - Staat, Manfred
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair
JF  - Computer Methods in Biomechanics and Biomedical Engineering
Y1  - 2019
U6  - https://doi.org/10.1080/10255842.2019.1572749
IS  - Early view
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Limpert, Nicolas
A1  - Wiesen, Patrick
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Schiffer, Stefan
T1  - The ROSIN Project and its Outreach to South Africa
JF  - R&D Journal
Y1  - 2019
VL  - 35
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Linder, Peter
A1  - Beckler, Matthias
A1  - Doerr, Leo
A1  - Stoelzle-Feix, Sonja
A1  - Fertig, Niels
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Gossmann, Matthias
T1  - A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions
JF  - Journal of Pharmacological and Toxicological Methods
Y1  - 2019
U6  - https://doi.org/10.1016/j.vascn.2019.05.162
SN  - 1056-8719
VL  - 99
IS  - Article number 106595
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Lorenz, Imke-Sophie B.
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Graph-theoretic resilience analysis of a water distribution system's topology
T2  - World Congress on Resilience, Reliability and Asset Management 2019
N2  - Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. In practice, the focus is set on the most beneficial maintenance measures and/or capacity adaptations of existing water distribution systems (WDS). Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of WDS, i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, metrics based on graph theory have been proposed. In this study, a promising approach is applied to assess the resilience of the WDS for a district in a major German City. The conducted analysis provides insight into the process of actively influencing the
resilience of WDS
KW  - Resilience Assessment
KW  - Graph Theory
KW  - Water Supply System
KW  - Case Study
Y1  - 2019
N1  - World Congress on Resilience, Reliability and Asset Management, 28-31 July 2019. Furama Riverfront Hotel, Singapore
SP  - 106
EP  - 109
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - JOUR
A1  - Lyons, W. Berry
A1  - Mikucki, Jill A.
A1  - German, Laura A.
A1  - Welch, Kathleen A.
A1  - Welch, Susan A.
A1  - Gardener, Christopher B.
A1  - Tulaczyk, Slawek M.
A1  - Pettit, Erin C.
A1  - Kowalski, Julia
A1  - Dachwald, Bernd
T1  - The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica
JF  - Journal of Geophysical Research: Biogeosciences
Y1  - 2019
U6  - https://doi.org/10.1029/2018JG004411
SN  - 2169-8961
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
JF  - Engineering Structures
Y1  - 2019
U6  - https://doi.org/10.1016/j.engstruct.2019.109435
SN  - 0141-0296
VL  - 197
IS  - Article 109435
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Marinković, Marko
A1  - Butenweg, Christoph
ED  - Papadrakakis, Manolis
ED  - Fragiadakis, Michalis
T1  - Experimental and numerical analysis of RC frames with decoupled masonry infills
T2  - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
N2  - Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their poor behaviour is the connection to the frame, which is usually constructed using mortar. This paper describes the novel solution for infill/frame connection based on application of elastomeric material between them. The system called INODIS (Innovative Decoupled Infill System) has the aim to postpone the activation of infill in in-plane direction and at the same time to provide sufficient out-of-plane support. First, experimental tests on infilled frame specimens are presented and the comparison of the results between traditionally infilled frames and infilled frames with the INODIS system are given. The results are then used for calibration and validation of numerical model, which can be further employed for investigating the influence of some material parameters on the behaviour of infilled frames with the INODIS system.
KW  - Earthquake
KW  - In-plane
KW  - Out-of-plane
KW  - Isolation
KW  - Seismic
Y1  - 2019
SN  - 978-618-82844-5-6
U6  - https://doi.org/10.7712/120119.7088.18845
SN  - 2623-3347
N1  - COMPDYN 2019, 24-26 June 2019, Crete, Greece.
SP  - 2464
EP  - 2479
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Mataré, Victor
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
ED  - Steinbauer, Gerald
ED  - Ferrein, Alexander
T1  - golog++ : An integrative system design
T2  - CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018
Y1  - 2019
SN  - 1613-0073
SP  - 29
EP  - 35
ER  - 
TY  - CHAP
A1  - May, Martin
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Latzke, Markus
A1  - Bäumer, Klaus
A1  - Uhlig, Ralf
A1  - Söhn, Matthias
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Experimental facility for investigations of wire mesh absorbers for pressurized gases
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117547
SN  - 0094243X
VL  - 2126
SP  - 030035-1
EP  - 030035-9
ER  - 
TY  - JOUR
A1  - Mennicken, Max
A1  - Peter, Sophia Katharina
A1  - Kaulen, Corinna
A1  - Simon, Ulrich
A1  - Karthäuser, Silvia
T1  - Controlling the Electronic Contact at the Terpyridine/Metal Interface
JF  - The Journal of Physical Chemistry C
Y1  - 2019
U6  - https://doi.org/10.1021/acs.jpcc.9b05865
SN  - 1932-7455
VL  - 123
IS  - 35
SP  - 21367
EP  - 21375
ER  - 
TY  - BOOK
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Structural Dynamics with Applications in Earthquake and Wind Engineering
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - https://doi.org/10.1007/978-3-662-57550-5
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.
KW  - Wind turbulence
KW  - Gust wind response
KW  - Spectral analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - https://doi.org/10.1007/978-3-662-57550-5_3
SP  - 153
EP  - 196
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Meyer, Carolin
A1  - Gaalen, Kerstin van
A1  - Leschinger, Tim
A1  - Scheyerer, Max J.
A1  - Neiss, Wolfram F.
A1  - Staat, Manfred
A1  - Müller, Lars P.
A1  - Wegmann, Kilian
T1  - Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement
JF  - BioMed Research International
Y1  - 2019
U6  - https://doi.org/10.1155/2019/9232813
SP  - Article ID 9232813
ER  - 
TY  - JOUR
A1  - Morais, Paulo V.
A1  - Silva, Anielle C. A.
A1  - Dantas, Noelio O.
A1  - Schöning, Michael Josef
A1  - Siqueira, José R., Jr.
T1  - Hybrid Layer‐by‐Layer Film of Polyelectrolytes‐Embedded Catalytic CoFe2O4 Nanocrystals as Sensing Units in Capacitive Electrolyte‐Insulator‐Semiconductor Devices
JF  - physica status solidi a : applications and materials sciences
Y1  - 2019
U6  - https://doi.org/10.1002/pssa.201900044
VL  - 216
IS  - 1900044
SP  - 1
EP  - 9
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Müller, Tim M.
A1  - Altherr, Lena
A1  - Ahola, Marja
A1  - Schabel, Samuel
A1  - Pelz, Peter F.
ED  - Rodrigues, H. C.
T1  - Multi-Criteria optimization of pressure screen systems in paper recycling – balancing quality, yield, energy consumption and system complexity
T2  - EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization
N2  - The paper industry is the industry with the third highest energy consumption in the European Union. Using recycled paper instead of fresh fibers for papermaking is less energy consuming and saves resources. However, adhesive contaminants in recycled paper are particularly problematic since they reduce the quality of the resulting paper-product. To remove as many contaminants and at the same time obtain as many valuable fibres as possible, fine screening systems, consisting of multiple interconnected pressure screens, are used. Choosing the best configuration is a non-trivial task: The screens can be interconnected in several ways, and suitable screen designs as well as operational parameters have to be selected. Additionally, one has to face conflicting objectives. In this paper, we present an approach for the multi-criteria optimization of pressure screen systems based on Mixed-Integer Nonlinear Programming. We specifically focus on a clear representation of the trade-off between different objectives.
Y1  - 2019
SN  - 978-3-319-97773-7
U6  - https://doi.org/10.1007/978-3-319-97773-7_105
N1  - EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization. 17-19 September 2018. Lisboa, Portugal
PB  - Springer International Publishing
CY  - Basel
ER  - 
TY  - JOUR
A1  - Noureddine, Yacine
A1  - Kraff, Oliver
A1  - Ladd, Mark E.
A1  - Wrede, Karsten
A1  - Chen, Bixia
A1  - Quick, Harald H.
A1  - Schaefers, Georg
A1  - Bitz, Andreas
T1  - Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips
JF  - Magnetic Resonance in Medicine
Y1  - 2019
U6  - https://doi.org/10.1002/mrm.27835
SN  - 1522-2594
IS  - Early view
SP  - 1
EP  - 17
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Solbach, Klaus
A1  - Gratz, Marcel
A1  - Brunheim, Sascha
A1  - Fiedler, Thomas M.
A1  - Johst, Sören
A1  - Bitz, Andreas
A1  - Shooshtary, Samaneh
A1  - Abuelhaija, Asjraf
A1  - Voelker, Maximilian N.
A1  - Rietsch, Stefan H. G.
A1  - Kraff, Oliver
A1  - Maderwald, Stefan
A1  - Flöser, Martina
A1  - Oehmingen, Mark
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - A 32-channel parallel transmit system add-on for 7T MRI
JF  - Plos one
Y1  - 2019
U6  - https://doi.org/10.1371/journal.pone.0222452
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - CHAP
A1  - Pieronek, Lukas
A1  - Kleefeld, Andreas
ED  - Constanda, Christian
ED  - Harris, Paul
T1  - The Method of Fundamental Solutions for Computing Interior Transmission Eigenvalues of Inhomogeneous Media
T2  - Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations
N2  - The method of fundamental solutions is applied to the approximate computation of interior transmission eigenvalues for a special class of inhomogeneous media in two dimensions. We give a short approximation analysis accompanied with numerical results that clearly prove practical convenience of our alternative approach.
Y1  - 2019
SN  - 978-3-030-16077-7
U6  - https://doi.org/10.1007/978-3-030-16077-7_28
SP  - 353
EP  - 365
PB  - Birkhäuser
CY  - Cham
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Selmer, Thorsten
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Screen-printed carbon electrodes modified with graphene oxide for the design of a reagent-free NAD+-dependent biosensor array
JF  - Analytical Chemistry
Y1  - 2019
U6  - https://doi.org/10.1021/acs.analchem.9b04481
VL  - 91
IS  - 23
SP  - 15293
EP  - 15299
PB  - ACS Publications
CY  - Washington
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Geissler, Hanno
A1  - Schöning, Michael Josef
T1  - Rapid methods and sensors for milk quality monitoring and spoilage detection
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2019.04.040
SN  - 0956-5663
VL  - 140
IS  - Article 111272
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Quitter, Julius
A1  - Marino, Matthew
A1  - Bauschat, J.-Michael
T1  - Highly Non-Planar Aircraft Configurations: Estimation of Flight Mechanical Derivatives Using Low-Order Methods
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Quittmann, Oliver J.
A1  - Abel, Thomas
A1  - Albracht, Kirsten
A1  - Strüder, Heiko K.
T1  - Reliability of muscular activation patterns and their alterations during incremental handcycling in able-bodied participants
JF  - Sports Biomechanics
Y1  - 2019
U6  - https://doi.org/10.1080/14763141.2019.1593496
SN  - 1752-6116
IS  - Article in press
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Raman, Aravind Hariharan
A1  - Jung, Alexander
A1  - Horváth, András
A1  - Becker, Nadine
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Modification of a computer model of human stem cell-derived cardiomyocyte electrophysiology based on Patch-Clamp measurements
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Human induced pluripotent stem cells (hiPSCs) have shown to be promising in disease studies and drug screenings [1]. Cardiomyocytes derived from hiPSCs have been extensively investigated using patch-clamping and optical methods to compare their electromechanical behaviour relative to fully matured adult cells. Mathematical models can be used for translating findings on hiPSCCMs to adult cells [2] or to better understand the mechanisms of various ion channels when a drug is applied [3,4]. Paci et al. (2013) [3] developed the first model of hiPSC-CMs, which they later refined based on new data [3]. The model is based on iCells® (Fujifilm Cellular Dynamics, Inc. (FCDI), Madison WI, USA) but major differences among several cell lines and even within a single cell line have been found and motivate an approach for creating sample-specific models. We have developed an optimisation algorithm that parameterises the conductances (in S/F=Siemens/Farad) of the latest Paci et al. model (2018) [5] using current-voltage data obtained in individual patch-clamp experiments derived from an automated patch clamp system (Patchliner, Nanion Technologies GmbH, Munich).
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 10
EP  - 11
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Rao, Deepak
A1  - Pathrose, Plato
A1  - Hüning, Felix
A1  - Sid, Jithin
T1  - An Approach for Validating Safety of Perception Software in Autonomous Driving Systems
T2  - Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16–18, 2019, Proceedings
N2  - The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon’s DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.
KW  - Advanced driver assistance systems (ADAS/AD)
KW  - ISO 26262
KW  - Safety-critical systems validation
KW  - Safety of the intended functionality (SOTIF)
Y1  - 2019
SN  - 978-3-030-32872-6
U6  - https://doi.org/10.1007/978-3-030-32872-6_20
SP  - 303
EP  - 316
PB  - Springer
CY  - Cham
ER  - 
TY  - GEN
A1  - Reiswich, Martin
A1  - Brandt, Hannes
A1  - Czupalla, Markus
T1  - Passive thermal control by integration of phase change material into additively manufactured structures
T2  - E2. 47th Student conference
N2  - Optical Instruments require an extremely stable thermal surrounding to prevent loss of data quality by misalignments of the instrument components resulting from material deformation due to temperature f luctuations (e.g. from solar intrusion). Phase Change Material (PCM) can be applied as a thermal damper to achieve a more uniform temperature distribution. The challenge of this method is, among others, the integration of PCM into affected areas. If correctly designed, incoming heat is latently absorbed during phase change of the PCM, i.e. the temperature of a structure remains almost constant. In a cold phase, the heat during phase change is released again latently until the PCM returns to its original state of aggregation. Thus, the structure is thermally stabilized. At FH Aachen– University of Applied Sciences research is conducted to apply PCM directly into the structures of affected components (baffles, optical benches, electronic boxes, etc.). Through the application of Additive Manufacturing, the necessary voids are directly printed into these structures and filled later with PCM. Additive Manufacturing enables complex structures that would not have been possible with conservative manufacturing methods. A corresponding Breadboard was developed and manufactured by Selective Laser Melting (SLM). The current state of research includes the handling and analysis of the Breadboard, tests and a correlation of the thermal model. The results have shown analytically and practically that it is possible to use PCM as an integral part of the structure as a thermal damper. The results serve as a basis for the further development of the technology, which should maximize performance and enable the integration of PCM into much more complex structures.
Y1  - 2019
N1  - 70th International Astronautical Congress, 21. - 25. Oktober 2019, Washington D.C., United States
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Brunheim, Sascha
A1  - Orzada, Stephan
A1  - Voelker, Maximilian N.
A1  - Maderwald, Stefan
A1  - Bitz, Andreas
A1  - Gratz, Marcel
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - Development and evaluation of a 16-channel receive-only RF coil to improve 7T ultra-high field body MRI with focus on the spine
JF  - Magnetic Resonance in Medicine
Y1  - 2019
U6  - https://doi.org/10.1002/mrm.27731
SN  - 1522-2594
IS  - Early view
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Roeth, A.A.
A1  - Slabu, I.
A1  - Kessler, A.
A1  - Engelmann, Ulrich M.
T1  - Local treatment of pancreatic cancer with magnetic nanoparticles
JF  - HPB
Y1  - 2019
U6  - https://doi.org/10.1016/j.hpb.2019.10.959
SN  - 1365-182X
VL  - 21
IS  - Supplement 3
SP  - S868
EP  - S869
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
T1  - Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE
JF  - Bulletin of Earthquake Engineering
Y1  - 2019
U6  - https://doi.org/10.1007%2Fs10518-019-00655-8
VL  - 17
IS  - 9
SP  - 4855
EP  - 4884
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Parisi, Davide
A1  - Casari, Chiara
A1  - Montanari, Luca
A1  - Ruggieri, Gabriella
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
T1  - Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings
JF  - Earthquake Spectra
Y1  - 2019
U6  - https://doi.org/10.1193/100118EQS224DP
SN  - 1944-8201
VL  - 35
IS  - 4
SP  - 1979
EP  - 2001
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Stupazzini, Marco
A1  - Parisi, Davide
A1  - Holtschoppen, Britta
A1  - Ruggieri, Gabriella
A1  - Butenweg, Christoph
T1  - Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database
JF  - Bulletin of Earthquake Engineering
N2  - The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings’ location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.
KW  - Empirical fragility functions
KW  - Empirical consequence curves
KW  - Precast buildings
KW  - Emilia-Romagna earthquake
KW  - PBEE
Y1  - 2019
U6  - https://doi.org/10.1007/s10518-019-00759-1
SN  - 1573-1456
VL  - 18
SP  - 1693
EP  - 1721
PB  - Springer Nature
ER  - 
TY  - JOUR
A1  - Rupp, Matthias
A1  - Handschuh, Nils
A1  - Rieke, Christian
A1  - Kuperjans, Isabel
T1  - Contribution of country-specific electricity mix and charging time to environmental impact of battery electric vehicles: A case study of electric buses in Germany
JF  - Applied Energy
Y1  - 2019
U6  - https://doi.org/10.1016/j.apenergy.2019.01.059
SN  - 0306-2619
VL  - 237
SP  - 618
EP  - 634
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - JOUR
A1  - Savitskaya, I.S.
A1  - Kistaubayeva, A.S.
A1  - Ignatova, L.V.
A1  - Digel, Ilya
T1  - Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells
JF  - Heliyon
Y1  - 2019
U6  - https://doi.org/10.1016/j.heliyon.2019.e02592
SN  - 2405-8440
VL  - 5
IS  - 10
SP  - Artikelnummer e02592
PB  - Elsevier
CY  - Amsterdam
ER  -