TY  - JOUR
A1  - Ziemons, Karl
A1  - Auffray, Etiennette
A1  - Barbier, R.
A1  - Brandenburg, G.
T1  - The ClearPET TM LSO/LuYAP phoswich scanner: a high performance small animal PET system
JF  - 2003 IEEE Nuclear Science Symposium Conference Record, Vol. 3
N2  - A 2nd generation high performance small animal PET scanner, called ClearPET™, has been designed and a first prototype is built by working groups of the Crystal Clear Collaboration (CCC). In order to achieve high sensitivity and maintain good uniform spatial resolution over the field of view in high resolution PET systems, it is necessary to extract the depth of interaction (DOI) information and correct for spatial degradation. The design of the first ClearPET™ Demonstrator based on the use of the multi-anode photomultiplier tube (Hamamatsu R7600-M64) and a LSO/LuYAP phoswich matrix. The two crystal layers of 8*8 crystals (2*2*10 mm3) are stacked on each other and mounted without light guide as one to one on the PMT. A unit of four PMTs arranged in-line represents one of 20 sectors of the ring design. The opening diameter of the crystal ring is 137 mm, the axial detector length is 110 mm. The PMT pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the pulse arrival time. Single gamma interactions are recorded and coincidences are found by software. The gantry allows rotation of the detector modules around the field of view. The measurements have been done using the first LSO/LuYAP detector cassettes.
Y1  - 2004
SN  - 1082-3654
SP  - 1728
EP  - 1732
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
A1  - Achten, R.
A1  - Auffray, Etiennette
A1  - Müller-Veggian, Mattea
T1  - The ClearPET™ neuro scanner: a dedicated LSO/LuYAP phoswich small animal PET scanner
JF  - 2004 IEEE Nuclear Science Symposium conference record : Nuclear Science Symposium, Medical Imaging Conference ; 16 - 22 October 2004, Rome, Italy ; [including the Symposium on Nuclear Power System (SNPS), 14th Room Temperature Semiconductor X- and Gamma-Ray Detectors Workshop and special focus workshops] / NPSS, Nuclear & Plasma Sciences Society. Guest ed.: J. Anthony Seibert
Y1  - 2004
SN  - 1082-3654
N1  - Nuclear Science Symposium Conference Record, 2004 IEEE
SP  - 2430
EP  - 2433
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - Comparison of forward hadrons produced in muon interactions on nuclear targets and deuterium
JF  - Zeitschrift für Physik C Particles and Fields
N2  - Differential multiplicities of forward produced hadrons in deep inelastic muon scattering on nuclear targets have been compared with those from deuterium. The ratios are observed to increase towards unity as the virtual photon energy increases with no significant dependence on the other muon kinematic variables. The hadron transverse momentum distribution is observed to be broadened in nuclear targets. The dependence on the remaining hadron variables is investigated and the results are discussed in the framework of intranuclear interaction models and in the context of the EMC effect.
Y1  - 1991
SN  - 1431-5858
N1  - European Muon Collaboration
VL  - 52
IS  - 1
SP  - 1
EP  - 11
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - Muoproduction of J/ψ and the gluon distribution of the nucleon
JF  - Zeitschrift für Physik C Particles and Fields
N2  - Measurements are presented of the inclusive distributions of the J/Ψ meson produced by muons of energy 200 GeV from an ammonia target. The gluon distribution of the nucleon has been derived from the data in the range 0.04<x<0.36 using a technique based on the colour singlet model. An arbitrary normalisation factor is required to obtain a reasonable integral of the gluon distribution. Some comments are made on the use of J/Ψ productionby virtual photons to extract the gluon distribution at HERA.
Y1  - 1992
SN  - 1431-5858
N1  - European Muon Collaboration
VL  - 56
IS  - 1
SP  - 21
EP  - 28
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - A measurement of the ratio of the nucleon structure function in copper and deuterium
JF  - Zeitschrift für Physik C Particles and Fields
N2  - Results are presented on the ratios of the nucleon structure function in copper to deuterium from two separate experiments. The data confirm that the nucleon structure function,F 2, is different for bound nucleons than for the quasi-free ones in the deuteron. The redistribution in the fraction of the nucleon's momentum carried by quarks is investigated and it is found that the data are compatible with no integral loss of quark momenta due to nuclear effects.
Y1  - 1993
SN  - 1431-5858
N1  - European Muon Collaboration
VL  - 57
IS  - 2
SP  - 211
EP  - 218
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - Jet production and fragmentation properties in deep inelastic muon scattering
JF  - Zeitschrift für Physik C :  Particles and Fields
Y1  - 1987
SN  - 0170-9739
N1  - European Muon Collaboration
VL  - 36
IS  - 4
SP  - 527
EP  - 543
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - A measurement of the spin asymmetry of the structure function g1 in deep inelastic muon-proton scattering
JF  - Physics Letters B
N2  - The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured over a large x range (0.01<x<0.7). The spin-dependent structure function g1(x) for the proton has been determined and its integral over x found to be 0.114±0.012±0.026, in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Bjorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These values for the integrals of g1 lead to the conclusion that the total quark spin constitutes a rather small fraction of the spin of the nucleon.
Y1  - 1988
SN  - 0370-2693
N1  - European Muon Collaboration
VL  - 206
IS  - 2
SP  - 364
EP  - 370
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - An investigation of the spin structure of the proton in deep inelastic scattering of polarised muons and polarised protons
JF  - Nuclear Physics B
N2  - The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured in the range 0.01<×<0.7. The spin dependent structure function g1(x) for the proton has been determined and, combining the data with earlier SLAC measurements, its integral over x found to be 0.126±0.010(stat.)±0.015(syst.), in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Biorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These integrals lead to the conclusion, in the naïve quark parton model, that the total quark spin constitutes a rather small fraction of the spin of the nucleon. Results are also presented on the asymmetries in inclusive hadron production which are consistent with the above picture.
Y1  - 1989
SN  - 0550-3213
N1  - European Muon Collaboration
VL  - 328
IS  - 1
SP  - 1
EP  - 35
ER  - 
TY  - CHAP
A1  - Ziegler, M.
A1  - Schüller, R.
A1  - Mottaghy, Darius
T1  - Numerical simulation of energy consumption of artificial ground freezing applications subject to water seepage
T1  - Simulation numérique de la consummation d´énergie des applications pour la congélation artificielle du sol soumise au flux de l´eau souterraine
T2  - Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013
Y1  - 2013
SP  - 2985
EP  - 2988
ER  - 
TY  - JOUR
A1  - Ziebura, Dawid
A1  - Bremen, Sebastian
A1  - Schleifenbaum, Johannes Henrich
A1  - Gebhardt, Andreas
T1  - Machbarkeitsstudie zur Verarbeitung von nicht rostendem Stahl 1.4404 unter Verwendung einer Diodenlaser-basierten LPBF-Maschine mit kartesischem Achssystem
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2018
SN  - 1614-0923
VL  - 15
ER  - 
TY  - JOUR
A1  - Zhubanova, А.
A1  - Mansurov, Z.A.
A1  - Digel, Ilya
A1  - Saviskaya, I.S.
A1  - Akimbekov, Nuraly S.
T1  - Designing of Heterogeneous Nanobiocomposites for Biotechnology
JF  - KazNU Bulletin. Biology series
Y1  - 2013
SN  - 1563-0218
VL  - 59
IS  - No 3/1
SP  - 89
EP  - 93
ER  - 
TY  - CHAP
A1  - Zhubanova, Azhar A.
A1  - Mansurov, Zulkhair A.
A1  - Digel, Ilya
T1  - Use of Advanced Nanomaterials for Bioremediation of Contaminated Ecosystems
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - This chapter shows that nanomaterials obtained by high-temperature carbonization of inexpensive plant raw material such as rice husk, grape seeds, and walnut shells can serve as a basis for the production of highly efficient microbial drugs, biodestructors, biosorbents, and biocatalysts, which are promising for the remediation of the ecosystem contaminated with heavy and radioactive metals, oil and oil products. A strong interest in engineering zymology is dictated by the necessity to address the issues of monitoring enzymatic processes, treatment, and diagnosis of a number of common human diseases, environmental pollution, quality control of pharmaceuticals and food. Nanomaterials obtained by high-temperature carbonization of cheap plant raw material such as-rice husks, grape seeds and walnut shells, can serve as a basis for creating of highly effective microbial preparations-biodestructors, biosorbents and biocatalysts, which are promising for the use of contaminated ecosystems, and for restoration of human intestine microecology.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - https://doi.org/10.1201/9780429428647-18
SP  - 353
EP  - 378
PB  - Jenny Stanford Publishing
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - The use of bactericidal effects of cluster ions generated by plasma in medical biotechnology
N2  - The most of conventional methods of air purification use the power of a fan to draw in air and pass it through a filter. The problem of bacterial contamination of inner parts of such a type of air conditioners in some cases draws attention towards alternative air-cleaning systems. Some manufacturers offer to use the ozone's bactericidal and deodorizing effects, but the wide spreading of such systems is restricted by the fact that toxic effects of ozone in respect of human beings are well known. In 2000 Sharp Inc. introduced "Plasma Cluster Ions (PCI)" air purification technology, which uses plasma discharge to generate cluster ions (I 0-14 ). This technology has been developed for those customers that are conscious about health and hygiene. In our experiments, we focused on some principal aspects of plasma-generated ions application - time-dependency and irreversibility of bactericidal action, spatial and kinetic characteristics of emitted cluster particles, their chemical targets in the microbial cells.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2007
ER  - 
TY  - JOUR
A1  - Zhubanova, Azhar A.
A1  - Aknazarov, S. K.
A1  - Mansurov, Zulkhair
A1  - Digel, Ilya
A1  - Kozhalakova, A. A.
A1  - Akimbekov, Nuraly S.
A1  - O'Heras, Carlos
A1  - Tazhibayeva, S.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials
N2  - Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2010
ER  - 
TY  - JOUR
A1  - Zhen, Manghao
A1  - Liang, Yunpei
A1  - Staat, Manfred
A1  - Li, Quanqui
A1  - Li, Jianbo
T1  - Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression
JF  - Theoretical and Applied Fracture Mechanics
N2  - The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress–strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress–strain curves of the fissured sandstone specimens.
KW  - Constitutive model
KW  - Damage mechanics theory
KW  - Discontinuous fractures
KW  - Uniaxial compression test
KW  - Non-parallel fissures
Y1  - 2024
U6  - https://doi.org/10.1016/j.tafmec.2024.104373
SN  - 0167-8442
VL  - 131
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Zhantlessova, Sirina
A1  - Savitskaya, Irina
A1  - Kistaubayeva, Aida
A1  - Ignatova, Ludmila
A1  - Talipova, Aizhan
A1  - Pogrebnjak, Alexander
A1  - Digel, Ilya
T1  - Correction: Zhantlessova et al. advanced “Green” prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy. Polymers 2022, 14, 3224
JF  - Polymers
Y1  - 2024
U6  - https://doi.org/10.3390/polym16131802
SN  - 2073-4360
N1  - This article belongs to the Special Issue Cellulose Based Composites
VL  - 16
IS  - 13
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Zhantlessova, Sirina
A1  - Savitskaya, Irina
A1  - Kistaubayeva, Aida
A1  - Ignatova, Ludmila
A1  - Talipova, Aizhan
A1  - Pogrebnjak, Alexander
A1  - Digel, Ilya
T1  - Advanced “Green” prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy
JF  - Polymers
N2  - Bacterial cellulose (BC) is a biopolymer produced by different microorganisms, but in biotechnological practice, Komagataeibacter xylinus is used. The micro- and nanofibrillar structure of BC, which forms many different-sized pores, creates prerequisites for the introduction of other polymers into it, including those synthesized by other microorganisms. The study aims to develop a cocultivation system of BC and prebiotic producers to obtain BC-based composite material with prebiotic activity. In this study, pullulan (PUL) was found to stimulate the growth of the probiotic strain Lactobacillus rhamnosus GG better than the other microbial polysaccharides gellan and xanthan. BC/PUL biocomposite with prebiotic properties was obtained by cocultivation of Komagataeibacter xylinus and Aureobasidium pullulans, BC and PUL producers respectively, on molasses medium. The inclusion of PUL in BC is proved gravimetrically by scanning electron microscopy and by Fourier transformed infrared spectroscopy. Cocultivation demonstrated a composite effect on the aggregation and binding of BC fibers, which led to a significant improvement in mechanical properties. The developed approach for “grafting” of prebiotic activity on BC allows preparation of environmentally friendly composites of better quality.
KW  - coculture
KW  - pullulan
KW  - exopolysaccharides
KW  - prebiotic
KW  - bacterial cellulose
Y1  - 2022
U6  - https://doi.org/10.3390/polym14153224
SN  - 2073-4360
N1  - This article belongs to the Special Issue "Cellulose Based Composites"
VL  - 14
IS  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Zhang, Jin
A1  - Heimbach, Tycho
A1  - Scheer, Nico
A1  - Barve, Avantika
A1  - Li, Wenkui
A1  - Lin, Wen
A1  - He, Handan
T1  - Clinical Exposure Boost Predictions by Integrating Cytochrome P450 3A4–Humanized Mouse Studies With PBPK Modeling
JF  - Journal of Pharmaceutical Sciences
N2  - NVS123 is a poorly water-soluble protease 56 inhibitor in clinical development. Data from in vitro hepatocyte studies suggested that NVS123 is mainly metabolized by CYP3A4. As a consequence of limited solubility, NVS123 therapeutic plasma exposures could not be achieved even with high doses and optimized formulations. One approach to overcome NVS123 developability issues was to increase plasma exposure by coadministrating it with an inhibitor of CYP3A4 such as ritonavir. A clinical boost effect was predicted by using physiologically based pharmacokinetic (PBPK) modeling. However, initial boost predictions lacked sufficient confidence because a key parameter, fraction of drug metabolized by CYP3A4 (ƒₘCYP3A4), could not be estimated with accuracy on account of disconnects between in vitro and in vivo preclinical data. To accurately estimate ƒₘCYP3A4 in human, an in vivo boost effect study was conducted using CYP3A4-humanized mouse model which showed a 33- to 56-fold exposure boost effect. Using a top-down approach, human ƒₘCYP3A4 for NVS123 was estimated to be very high and included in the human PBPK modeling to support subsequent clinical study design. The combined use of the in vivo boost study in CYP3A4-humanized mouse model mice along with PBPK modeling accurately predicted the clinical outcome and identified a significant NVS123 exposure boost (∼42-fold increase) with ritonavir.
Y1  - 2016
U6  - https://doi.org/doi.org/10.1016/j.xphs.2016.01.021
SN  - 0022-3549
VL  - Volume 105
IS  - Issue 4
SP  - 1398
EP  - 1404
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Zhang, G.
A1  - Valero, Daniel
A1  - Bung, Daniel Bernhard
A1  - Chanson, H.
T1  - On the estimation of free-surface turbulence using ultrasonic sensors
JF  - Flow Measurement and Instrumentation
N2  - Accurate determination of free-surface dynamics has attracted much research attention during the past decade and has important applications in many environmental and water related areas. In this study, the free-surface dynamics in several turbulent flows commonly found in nature were investigated using a synchronised setup consisting of an ultrasonic sensor and a high-speed video camera. Basic sensor capabilities were examined in dry conditions to allow for a better characterisation of the present sensor model. The ultrasonic sensor was found to adequately reproduce free-surface dynamics up to the second order, especially in two-dimensional scenarios with the most energetic modes in the low frequency range. The sensor frequency response was satisfactory in the sub-20 Hz band, and its signal quality may be further improved by low-pass filtering prior to digitisation. The application of the USS to characterise entrapped air in high-velocity flows is also discussed.
Y1  - 2018
U6  - https://doi.org/10.1016/j.flowmeasinst.2018.02.009
SN  - 0955-5986
VL  - 60
SP  - 171
EP  - 184
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Zeyen, Kim
T1  - Seeds : Konzeption und Gestaltung eines Toolkits
für die Entwicklung nachhaltiger Webdesigns
N2  - Die Menschheit lebt über ihre Verhältnisse: Permanent übersteigt unser Verbrauch die uns jährlich zur Verfügung stehenden Ressourcen. Der Energiebedarf digitaler Anwendungen wird dabei meist unterschätzt. Wie Interaction-Designer:innen einen Beitrag zur Entwicklung nachhaltiger Websites leisten können, ist aktuell nur durch aufwendige Recherche zu beantworten. Die Bachelorarbeit »Seeds« stellt einen Schritt im Prozess zu mehr Nachhaltigkeit dar. Sie umfasst ein Toolkit, bestehend aus einer Website und einem Plugin für gängige Designtools. Dieses bündelt alle Informationen, um das Internet barriereärmer, sozialer, ethischer und eben auch ökologisch verträglicher zu gestalten. Während die Website eine Anlaufstelle für den Wissensaufbau darstellt, unterstützt das Plugin bei der Entwicklung eigener Designs, ohne dass Gestalter:innen den Designprozess verlassen müssen.
KW  - Nachhaltigkeit
KW  - Energieeffizienz
KW  - Barrierefreiheit
KW  - Figma
KW  - Lernen
Y1  - 2024
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Zerlin, Kay
A1  - Kasischke, Nicole
A1  - Digel, Ilya
A1  - Maggakis-Kelemen, Christina
A1  - Temiz Artmann, Aysegül
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Linder, Peter
A1  - Artmann, Gerhard
T1  - Structural transition temperature of hemoglobins correlates with species’ body temperature
JF  - European Biophysics Journal. 37 (2007), H. 1
Y1  - 2007
SN  - 1432-1017
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Zerlin, Kay
A1  - Digel, Ilya
A1  - Stadler, Andreas M.
A1  - Büldt, Georg
A1  - Zaccai, Guiseppe
A1  - Artmann, Gerhard
T1  - Dynamics and interactions of hemoglobin in human red blood cells and concentrated hemoglobin solutions
JF  - Regenerative medicine. 2 (2007), H. 5
Y1  - 2007
SN  - 1746-0751
N1  - Proceedings of the 3rd World Congress on Regenerative Medicine. October 18-20, 2007. Leipzig, Germany
SP  - 573
EP  - 573
ER  - 
TY  - THES
A1  - Zaunbrecher, Fabienne
T1  - Living Spaces - By OASE: Konzeption eines Flagship-Stores mit Wohlfühl- und Erlebnis-Spaces
N2  - Konzeption eines Flagship-Stores mit Wohlfühl- und Erlebnis-Spaces
Die Bedürfnisse von Besuchern und Kunden eines Geschäfts haben sich über die letzten Jahre stark verändert. Sie möchten das ihr Kauf zum Erlebnis wird. Auf Basis dieser Erkenntnis wurde im Rahmen dieser Arbeit zusammen mit den Produkten des Weltmarktführers für Teichtechnik und Aquaristik „OASE – Living Water“ ein Storekonzept geschaffen. Dieses verbindet den Verkaufsraum mit unterschiedlichen Erlebniswelten, welche auf die jeweilig ausgestellte Produktkategorie abgestimmt sind. Zusätzlich eröffnet ein diverser und aufregend gestalteter Gartenbereich der zum Entspannen und Verweilen einlädt. Der herausstechende Aspekt des Konzepts ist, dass die Produkte sowohl als reines Produkt, als auch in verbauter Version in Aktion zu sehen sind. Auf diese Art bietet die Marke „OASE – Living Water“ ein neues Kauf-Erlebnis an.
KW  - Storekonzept
KW  - Verkaufsraum
KW  - Teichtechnik
KW  - Aquaristik
KW  - Wasser
Y1  - 2021
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Zatko, B.
A1  - Dubecký, F.
A1  - Bohacek, P.
A1  - Gombia, E.
A1  - Frigeri, P.
A1  - Mosca, R.
A1  - Franchi, S.
A1  - Huarn, J.
A1  - Nescas, V.
A1  - Sekacova, M.
A1  - Förster, Arnold
A1  - Kordos, P.
T1  - On the spectrometric performance limit of radiation detectors based on semi-insulating GaAs
JF  - Nuclear instruments and methods in physics research, Section A. 531 (2004), H. 1-2
Y1  - 2004
SN  - 0168-9002
SP  - 111
EP  - 120
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Rieder, G.
T1  - Zur Eingrenzung der Eigenfrequenzen eines stationär schwingenden elastischen Körpers mittels Integralgleichungen
JF  - ZAMM - Zeitschrift für angewandte Mathematik und Mechanik. 60 (1980), H. 6
Y1  - 1980
SN  - 1521-4001
SP  - T149
EP  - T150
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Rieder, G.
T1  - Bracketing eigenvalues of an oscillating elastic body by integral equations
JF  - Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, Mátrafüred (Hungary), 21 - 23 February, 1979 / ed. by À. Bosznay
Y1  - 1980
SN  - 963-05-2625-5
N1  - Euromech Colloquium <112, 1979, Mátrafüred>
SP  - 421
EP  - 434
PB  - Akad. Kiadó
CY  - Budapest
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Rieder, G.
T1  - Eine Variante des Kraftgrößenverfahrens für ebene Rahmentragwerke
JF  - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen
Y1  - 1976
SN  - 0509-9773
VL  - 23
IS  - 3
SP  - 304
EP  - 306
PB  - HAB
CY  - Weimar
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Panagiotopoulos, P. D.
T1  - An integral "Equation" approach to the unilateral contact problem
JF  - ZAMM - Zeitschrift für angewandte Mathematik und Mechanik. 59 (1979), H. 8
Y1  - 1979
SN  - 1521-4001
SP  - 392
EP  - 393
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Hackl, Klaus
T1  - On the existence, uniqueness and completeness of displacements and stress functions in linear elasticity  / Hackl, Klaus ; Zastrow, Udo
JF  - Journal of Elasticity. 19 (1988), H. 1
Y1  - 1988
SN  - 1573-2681
SP  - 3
EP  - 23
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Greuel, M.
A1  - Weiße, Felicitas
T1  - Das Kawabata-Meßgeräte- und Berechnungssystem: Der Griff eines Gewebes - subjektive Beurteilung und objektive Messung, Teil 1
JF  - Bekleidung + Wäsche, Bekleidung + Maschenware : Zeitschrift für die gesamte Bekleidungsindustrie. 43 (1991), H. 4
Y1  - 1991
SP  - 22
EP  - 25
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Greuel, M.
A1  - Weiße, Felicitas
T1  - Das Kawabata-Meßgeräte- und Berechnungssystem: Der Griff eines Gewebes - subjektive Beurteilung und objektive Messung, Teil 2
JF  - Bekleidung + Wäsche, Bekleidung + Maschenware : Zeitschrift für die gesamte Bekleidungsindustrie. 43 (1991), H. 5
Y1  - 1991
SP  - 36
EP  - 45
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - On the complete system of fundamental solutions for anisotropic slices and slabs: A comparison by use of the slab analogy
JF  - Journal of Elasticity. 15 (1985), H. 3
Y1  - 1985
SN  - 1573-2681
SP  - 293
EP  - 318
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Basic geometrical singularities in plane-elasticity and plate-bending problems
JF  - International Journal of Solids and Structures. 21 (1985), H. 10
Y1  - 1985
SN  - 0020-7683
SP  - 1047
EP  - 1067
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Numerical plane stress analysis by integral equations based on the singularity method
JF  - SM archives . 10 (1985)
Y1  - 1985
SN  - 0376-7426
SP  - 113
EP  - 128
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Zur Berechnung anisotroper Scheiben durch singuläre Integralgleichungen
JF  - ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik.
Y1  - 1978
SN  - 1521-4001
U6  - https://doi.org/10.1002/zamm.19780580605
VL  - 58
IS  - 6
SP  - T132
EP  - T133
PB  - Wiley-VCH
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Anisotrope Scheiben mit gemischten Randbedingungen
JF  - ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik. 59 (1979), H. 5
Y1  - 1979
SN  - 1521-4001
SP  - T218
EP  - T219
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Die Airysche Spannungsfunktion für die unendliche anisotrope, orthotrope und isotrope Scheibe
JF  - ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik. 60 (1980), H. 6
Y1  - 1980
SN  - 1521-4001
SP  - T159
EP  - T160
ER  - 
TY  - BOOK
A1  - Zastrow, Udo
T1  - Berechnung von anisotropen Scheiben mit gemischten Randbedingungen durch singulaere Integralgleichungen
Y1  - 1979
N1  - Aachen, Diss., 1979
ER  - 
TY  - BOOK
A1  - Zastrow, Udo
T1  - Zur Lösung von Halbraumproblemen nach der Spannungsfunktionenmethode : neue u. alte Ansätze für Verschiebungs- u. Spannungsfunktionen in d. räuml. Elastizitätstheorie
Y1  - 1986
SN  - 3-18-143318-7
N1  - Zugl.: Aachen, Techn. Hochsch., Habil.-Schr. ; Fortschritt-Berichte VDI : Reihe 18 ; 33
PB  - VDI-Berl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Die Einflußfunktionen der Einzelkraft und der Stufenversetzung in der anisotropen Vollebene
JF  - Archive of Applied Mechanics - Ingenieur Archiv. 51 (1981), H. 1-2
Y1  - 1981
SN  - 1432-0681
SP  - 89
EP  - 99
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Zum System der Einflußfunktionen für die unendliche anisotrope Scheibe mit statischen und geometrischen Singularitäten
JF  - Archive of Applied Mechanics - Ingenieur Archiv. 55 (1985), H. 2
Y1  - 1985
SN  - 1432-0681
SP  - 124
EP  - 133
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Solution of plane anisotropic elastostatical boundary value problems by singular integral equations
JF  - Acta Mechanica. 44 (1982), H. 1-2
Y1  - 1982
SN  - 1619-6937
SP  - 59
EP  - 71
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - On the formulation of the fundamental solutions for orthotropic plane elasticity
JF  - Acta Mechanica. 57 (1985), H. 3-4
Y1  - 1985
SN  - 1619-6937
SP  - 113
EP  - 122
ER  - 
TY  - JOUR
A1  - Zange, Jochen
A1  - Schopen, Kathrin
A1  - Albracht, Kirsten
A1  - Gerlach, Darius A.
A1  - Frings-Meuthen, Petra
A1  - Maffiuletti, Nicola A.
A1  - Bloch, Wilhelm
A1  - Rittweger, Jörn
T1  - Using the Hephaistos orthotic device to study countermeasure effectiveness of neuromuscular electrical stimulation and dietary lupin protein supplementation, a randomised controlled trial
JF  - Plos one
Y1  - 2017
U6  - https://doi.org/10.1371/journal.pone.0171562
VL  - 12
IS  - 2
ER  - 
TY  - CHAP
A1  - Zang, Zhigang
A1  - Hess, Holger
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
ED  - Kamerman, Gary W.
T1  - Phase-lock techniques using new correlation receivers for TOF-laser ranging
T2  - Laser radar technology and applications VII : 3 - 4 April 2002, Orlando, USA. - (SPIE proceedings series ; 4723)
Y1  - 2002
SN  - 0-8194-4473-1
U6  - https://doi.org/10.1117/12.476402
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Laser Radar Technology and Applications <7, 2002, Orlando, FL>
SP  - 112
EP  - 120
PB  - SPIE, International Society for Optical Engineering
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Zahra, Mahdi
A1  - Phani Srujan, Merige
A1  - Chico Caminos, Ricardo Alexander
A1  - Schmitz, Pascal
A1  - Herrmann, Ulf
A1  - Teixeira Boura, Cristiano José
A1  - Schmitz, Mark
A1  - Gielen, Hans
A1  - Gedle, Yibekal
A1  - Dersch, Jürgen
T1  - Modeling the thermal behavior of solar salt in electrical resistance heaters for the application in PV-CSP hybrid power plants
T2  - SOLARPACES 2020
N2  - Concentrated Solar Power (CSP) systems are able to store energy cost-effectively in their integrated thermal energy storage (TES). By intelligently combining Photovoltaics (PV) systems with CSP, a further cost reduction of solar power plants is expected, as well as an increase in dispatchability and flexibility of power generation. PV-powered Resistance Heaters (RH) can be deployed to raise the temperature of the molten salt hot storage from 385 °C up to 565 °C in a Parabolic Trough Collector (PTC) plant. To avoid freezing and decomposition of molten salt, the temperature distribution in the electrical resistance heater is investigated in the present study. For this purpose, a RH has been modeled and CFD simulations have been performed. The simulation results show that the hottest regions occur on the electric rod surface behind the last baffle. A technical optimization was performed by adjusting three parameters: Shell-baffle clearance, electric rod-baffle clearance and number of baffles. After the technical optimization was carried out, the temperature difference between the maximum temperature and the average outlet temperature of the salt is within the acceptable limits, thus critical salt decomposition has been avoided. Additionally, the CFD simulations results were analyzed and compared with results obtained with a one-dimensional model in Modelica.
KW  - Solar thermal technologies
KW  - Hybrid energy system
KW  - Concentrated solar power
KW  - Energy storage
KW  - Photovoltaics
Y1  - 2022
SN  - 978-0-7354-4195-8
U6  - https://doi.org/10.1063/5.0086268
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - SOLARPACES 2020: 26th International Conference on Concentrating Solar Power and Chemical Energy Systems, 28 September–2 October 2020, Freiburg, Germany
IS  - 2445 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Zahn, Helmut
A1  - Berndt, Heinz
A1  - Fehrenbach, P.
ED  - Hanson, Horst
T1  - Synthese cyclischer Cystinpeptide mit Insulin A-und B-Kettensequenzen
T2  - Peptides 1972 : proceedings of the Twelfth European Peptide Symposium, Reinhardsbrunn Castle, German Democratic Republic, September 1972
Y1  - 1973
SN  - 0-7204-4132-3
SN  - 0-444-10500-X
SP  - 101
EP  - 102
PB  - North-Holland Publ. [u.a.],
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Zabirov, Alexander
A1  - Schleser, Markus
A1  - Bucherer, Sebastian
T1  - Füge- und Dichtkonzept für einen Leichtbauverbrennungsmotor
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2021
U6  - https://doi.org/10.1007/s35145-021-0531-5
SN  - 2192-8681
VL  - 65
IS  - 11
SP  - 12
EP  - 19
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - BOOK
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
ED  - Yoshinobu, Tatsuo
ED  - Schöning, Michael Josef
T1  - Light-addressing and chemical imaging technologies for electrochemical sensing
Y1  - 2020
SN  - 978-3-03943-029-1
U6  - https://doi.org/10.3390/books978-3-03943-029-1
N1  - This book is a printed edition of the Special Issue Light-Addressing and Chemical Imaging Technologies for Electrochemical Sensing that was published in Sensors
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensors (LAPS) for cell monitoring and biosensing
JF  - Current Opinion in Electrochemistry
Y1  - 2021
U6  - https://doi.org/10.1016/j.coelec.2021.100727
SN  - 2451-9103
IS  - In Press, Journal Pre-proof
PB  - Elsevier
CY  - Amsterdam
ER  -