TY  - CHAP
A1  - Sauerborn, Markus
T1  - Investigations to the influence of clouds and aerosols to the haze of the sunshape
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Caminos, Ricardo Alexander Chico
A1  - Ürlings, Nicolas
A1  - Dutta, Siddharth
A1  - Ruiz, Victor
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis
A1  - Agathokleous, Rafaela
A1  - Jung, Christian
A1  - Alexopoulos, Spiros
A1  - Atti, Vikrama Nagababu
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus
T2  - AIP Conference Proceedings
N2  - As part of the transnational research project EDITOR, a parabolic trough collector system (PTC) with concrete thermal energy storage (C-TES) was installed and commissioned in Limassol, Cyprus. The system is located on the premises of the beverage manufacturer KEAN Soft Drinks Ltd. and its function is to supply process steam for the factory's pasteurisation process [1]. Depending on the factory's seasonally varying capacity for beverage production, the solar system delivers between 5 and 25 % of the total steam demand. In combination with the C-TES, the solar plant can supply process steam on demand before sunrise or after sunset. Furthermore, the C-TES compensates the PTC during the day in fluctuating weather conditions. The parabolic trough collector as well as the control and oil handling unit is designed and manufactured by Protarget AG, Germany. The C-TES is designed and produced by CADE Soluciones de Ingeniería, S.L., Spain. In the focus of this paper is the description of the operational experience with the PTC, C-TES and boiler during the commissioning and operation phase. Additionally, innovative optimisation measures are presented.
Y1  - 2020
U6  - https://doi.org/10.1063/5.0029278
N1  - SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 1–4 October 2019, Daegu, South Korea
IS  - 2303
SP  - 140004-1
EP  - 140004-10
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Schneider, Iesse Peer
A1  - Angele, Florian
A1  - Atti, Vikrama
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Development of heliostat field calibration methods: Theory and experimental test results
T2  - SolarPACES 2022 conference proceedings
N2  - In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut Jülich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.
KW  - Heliostat Field Calibration
KW  - Unmanned aerial vehicle
KW  - UAV
KW  - Quadrocopter
KW  - Camera system
Y1  - 2024
U6  - https://doi.org/10.52825/solarpaces.v1i.678
SN  - 2751-9899 (online)
N1  - SolarPACES 2022: 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Atti, Vikrama
A1  - Alexopoulos, Spiros
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
A1  - Dutta, Siddharth
A1  - Kioutsioukis, Ioannis
T1  - DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook
T2  - SolarPACES 2022 conference proceedings
N2  - This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut Jülich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 % based on the tested days. The result fulfils SIJ’s aim to achieve a reliability of around 70 %, but SIJ aims to still improve the DNI forecast quality.
KW  - Direct normal irradiance forecast
KW  - DNI forecast
KW  - Parabolic trough collector
KW  - PTC
KW  - Thermal Energy Storage
Y1  - 2024
U6  - https://doi.org/10.52825/solarpaces.v1i.731
SN  - 2751-9899 (online)
N1  - SolarPACES 2022, 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Sakthivel, Mariappan
A1  - Weppner, Werner
T1  - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method
N2  - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.
KW  - Biosensor
KW  - Hydrogen sensor
KW  - amperometric sensor
KW  - porous Pt electrode
KW  - chemical reduction method
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Rütters, René
A1  - Weinheimer, Marius
A1  - Bragard, Michael
T1  - Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench
T2  - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
Y1  - 2018
SN  - 978-1-5386-6903-7
U6  - https://doi.org/10.1109/RTUCON.2018.8659871
ER  - 
TY  - CHAP
A1  - Rütters, René
A1  - Bragard, Michael
A1  - Dolls, Sarah
T1  - The Inverted Rotary Pendulum: Facilitating Practical Teaching in Advanced Control Engineering
T2  - 2024 IEEE Global Engineering Education Conference (EDUCON)
N2  - This paper outlines a practical approach to teach control engineering principles, with an inverted rotary pendulum, serving as an illustrative example. It shows how the pendulum is embedded in an advanced course of control engineering. This approach is incorporated into a flipped-classroom concept, as well as classical teaching concepts, offering students practical experience in control engineering. In addition, the design of the pendulum is shown, using a Raspberry Pi as the target platform for Matlab Simulink. This pendulum can be used in the classroom to evaluate the controller design mentioned above. It is analysed if the use of the pendulum generates a deeper understanding of the learning contents.
KW  - Matlab
KW  - Engineering education
KW  - Online services
KW  - Software packages
KW  - Electronic learning
KW  - Control engineering
Y1  - 2024
U6  - https://doi.org/10.1109/EDUCON60312.2024.10578937
SN  - 2165-9559
SN  - 2165-9567 (eISSN)
N1  - 2024 IEEE Global Engineering Education Conference (EDUCON), 08-11 May 2024, Kos Island, Greece
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - https://doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
ED  - Klinkel, Sven
ED  - Butenweg, Christoph
ED  - Lin, Gao
ED  - Holtschoppen, Britta
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities
N2  - Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation
Y1  - 2013
SN  - 978-3-658-02810-7
SN  - 978-3-658-02809-1
SN  - 978-3-658-14037-3
U6  - https://doi.org/10.1007/978-3-658-02810-7_36
N1  - International Conference on Seismic Design of Industrial Facilities, Aachen, Germany, 26.-27.09.2013.
https://sedif-conference.jimdofree.com/
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Henneböhl, Benedickt
A1  - Butenweg, Christoph
T1  - Global buckling analysis of cylindrical liquid storage tanks under earthquake loading
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 5270
EP  - 5281
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Boesen, Niklas
A1  - Gellert, Christoph
T1  - Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rosemann, Michael
A1  - Eggert, Mathias
A1  - Voigt, Matthias
A1  - Beverungen, Daniel
T1  - Leveraging Social Network Data for Analytical CRM Strategies - The Introduction of Social BI.
T2  - ECIS 2012 Proceedings
Y1  - 2012
N1  - European Conference on Information Systems
(ECIS), 2012
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND
T2  - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas
Y1  - 2007
SN  - 978-1-4244-1108-5
SP  - 4D2-1
EP  - 4D2-13
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - https://doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - https://doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Personalized information services : an electronic information commodity and its production
T2  - Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]
Y1  - 2001
SN  - 1-58603-191-0
SP  - 48
EP  - 58
PB  - IOS Press [u.a.]
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - DISMED - an innovation portal for printing and media industry
T2  - CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000
Y1  - 2001
N1  - Programmpunkt: Cybercafé.
PB  - CORDIS Archive
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Production and distribution of personalized information services employing mass customization
T2  - 2nd Interdisciplinary World Congress on Mass Customization and Personalization : MCPC'03, October 6 - 8, 2003, Technische Universität München, Munic, Germany
Y1  - 2003
SP  - Part IV
PB  - Techn. Univ. (TUM)
CY  - München
ET  - CD-Ausg.
ER  - 
TY  - CHAP
A1  - Ritschel, Konstantin
A1  - Stenzel, Adina
A1  - Czarnecki, Christian
A1  - Hong, Chin-Gi
ED  - Gesellschaft für Informatik e.V. (GI), 
T1  - Realizing robotic process automation potentials: an architectural perspective on a real-life implementation case
T2  - GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science & Sustainability
N2  - The initial idea of Robotic Process Automation (RPA) is the automation of business processes through a simple emulation of user input and output by software robots. Hence, it can be assumed that no changes of the used software systems and existing Enterprise Architecture (EA) is
required. In this short, practical paper we discuss this assumption based on a real-life implementation project. We show that a successful RPA implementation might require architectural work during analysis, implementation, and migration. As practical paper we focus on exemplary lessons-learned and new questions related to RPA and EA.
KW  - Robotic Process Automation
KW  - Enterprise Architecture
KW  - Implementation Case
Y1  - 2021
SN  - 9783885797081
U6  - https://doi.org/10.18420/informatik2021-108
SN  - 1617-5468
N1  - INFORMATIK 2021 – 51. Jahrestagung der Gesellschaft für Informatik, 27. September – 01. Oktober 2021 / Virtuell
SP  - 1303
EP  - 1311
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
A1  - Hess, Rudolf
ED  - Tang, Suning
T1  - Optical GMSK modem for infrared wireless communication based on a new receiver principle in CMOS technology
T2  - Optoelectronic interconnects VIII : 25 - 26 January 2001, San Jose, USA. - (Proceedings of SPIE ; 4292)
Y1  - 2001
SN  - 0-8194-3970-3
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Optoelectronic Interconnects <8, 2001, San Jose, Calif.>
SP  - 25
EP  - 34
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
ED  - Korevaar, Eric John
T1  - Introduction of a new opto-electrical phase-locked loop in CMOS technology: the PMD-PLL
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.
SP  - 108
EP  - 116
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Hagebeuker, Bianca
ED  - Grün, Armin
T1  - A 3D time of flight camera of object detection
T2  - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1
Y1  - 2007
SN  - 3-906467-67-8 (Gesamtwerk)
N1  - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich>
SP  - 1
EP  - 16
PB  - ETH
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
T1  - A highly integrated monolithic electro-optical PLL in CMOS-technology (PMD-PLL) for communication and ranging systems
T2  - Proceedings / OPTO 2000, 4th International Conference and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques : May 9 - 11, 2000, Erfurt Fair, Conference Centre
Y1  - 2000
N1  - International Congress and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques <4, 2000, Erfurt> ; OPTO <4, 2000, Erfurt>
SP  - 235
EP  - 239
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Albrecht, M.
A1  - Frey, J.
A1  - [u.a.], 
ED  - Lerch, Reinhard
T1  - Time-of-Flight 3D-camera for autonomous navigation and industrial automation
T2  - Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA
Y1  - 2003
N1  - Internationale Messe mit Kongress Sensor <Nürnberg>
PB  - AMA Service
CY  - Wunstorf/Germany
ET  - CD-ROM-Ausg.
ER  - 
TY  - CHAP
A1  - Riga, Evi
A1  - Pitilakis, Kyriazis
A1  - Butenweg, Christoph
A1  - Apostolaki, Stefania
A1  - Karatzetzou, Anna
ED  - Arion, Cristian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities
T2  - The Third European Conference on Earthquake Engineering and Seismology
N2  - The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.
KW  - ESHM20, industrial facilities
KW  - seismic hazard
KW  - seismic design
KW  - safety control
Y1  - 2022
SN  - 978-973-100-533-1
N1  - 3ECEES - Third European Conference on Earthquake Engineering and Seismology, September 4 – September 9, 2022, Bucharest
SP  - 3261
EP  - 3270
ER  - 
TY  - CHAP
A1  - Rieper, Harald
A1  - Gebhardt, Andreas
A1  - Stucker, Brent
T1  - Process parameters for Selective Laser Melting of AgCu7
T2  - DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3
Y1  - 2016
SN  - 978-3-8396-1001-5
N1  - DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17
SP  - 171
EP  - 176
PB  - Fraunhofer-Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Richter, Charlotte
A1  - Braunstein, Bjoern
A1  - Stäudle, Benjamin
A1  - Attias, Julia
A1  - Suess, Alexander
A1  - Weber, T.
A1  - Rittweger, Joern
A1  - Green, David A.
A1  - Albracht, Kirsten
T1  - In vivo fascicle length of the gastrocnemius muscle during walking in simulated martian gravity using two different body weight support devices
T2  - 23rd Annual Congress of the European College of Sport Science, Dublin, Irland
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Rens, Gavin
A1  - Ferrein, Alexander
A1  - Poel, Etienne van der
T1  - Extending DTGolog to deal with POMD-Ps
T2  - Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)
Y1  - 2008
SP  - 49
EP  - 54
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Schwager, Christian
A1  - Ghiasi, Mona
A1  - Schmitz, Pascal
A1  - Bohang, Fakhri
A1  - Caminos, Ricardo Alexander Chico
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming
T2  - AIP Conference Proceedings
N2  - A 16.77 kW thermal power bayonet-tube reactor for the mixed reforming of methane using solar energy has been designed and modeled. A test bench for the experimental tests has been installed at the Synlight facility in Juelich, Germany and has just been commissioned. This paper presents the solar-heated reactor design for a combined steam and dry reforming as well as a scaled-up process simulation of a solar reforming plant for methanol production. Solar power towers are capable of providing large amounts of heat to drive high-endothermic reactions, and their integration with thermochemical processes shows a promising future. In the designed bayonet-tube reactor, the conventional burner arrangement for the combustion of natural gas has been substituted by a continuous 930 °C hot air stream, provided by means of a solar heated air receiver, a ceramic thermal storage and an auxiliary firing system. Inside the solar-heated reactor, the heat is transferred by means of convective mechanism mainly; instead of radiation mechanism as typically prevailing in fossil-based industrial reforming processes. A scaled-up solar reforming plant of 50.5 MWth was designed and simulated in Dymola® and AspenPlus®. In comparison to a fossil-based industrial reforming process of the same thermal capacity, a solar reforming plant with thermal storage promises a reduction up to 57 % of annual natural gas consumption in regions with annual DNI-value of 2349 kWh/m2. The benchmark solar reforming plant contributes to a CO2 avoidance of approx. 79 kilotons per year. This facility can produce a nominal output of 734.4 t of synthesis gas and out of this 530 t of methanol a day.
Y1  - 2020
U6  - https://doi.org/10.1063/5.0029974
N1  - SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 1–4 October 2019, Daegu, South Korea
IS  - 2303
SP  - 170012-1
EP  - 170012-9
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Dieckmann, Simon
A1  - Weidle, Mathias
A1  - Dersch, Jürgen
A1  - Teixeira Boura, Cristiano José
A1  - Polklas, Thomas
A1  - Kuschel, Marcus
A1  - Herrmann, Ulf
T1  - Retrofitting of existing parabolic trough collector power plants with molten salt tower systems
T2  - AIP Conference Proceedings
Y1  - 2018
U6  - https://doi.org/10.1063/1.5067030
VL  - 2033
IS  - 1
SP  - 030014-1
EP  - 030014-8
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Reke, Michael
A1  - Peter, Daniel
A1  - Schulte-Tigges, Joschua
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Walter, Thomas
A1  - Matheis, Dominik
T1  - A Self-Driving Car Architecture in ROS2
T2  - 2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa
N2  - In this paper we report on an architecture for a self-driving car that is based on ROS2. Self-driving cars have to take decisions based on their sensory input in real-time, providing high reliability with a strong demand in functional safety. In principle, self-driving cars are robots. However, typical robot software, in general, and the previous version of the Robot Operating System (ROS), in particular, does not always meet these requirements. With the successor ROS2 the situation has changed and it might be considered as a solution for automated and autonomous driving. Existing robotic software based on ROS was not ready for safety critical applications like self-driving cars. We propose an architecture for using ROS2 for a self-driving car that enables safe and reliable real-time behaviour, but keeping the advantages of ROS such as a distributed architecture and standardised message types. First experiments with an automated real passenger car at lower and higher speed-levels show that our approach seems feasible for autonomous driving under the necessary real-time conditions.
Y1  - 2020
SN  - 978-1-7281-4162-6
U6  - https://doi.org/10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020
N1  - 2020 International SAUPEC/RobMech/PRASA Conference, 29-31 Jan. 2020, Cape Town, South Africa
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Glowania, Michael
T1  - Impregnated textile reinforcements for concrete applications
T2  - European Coatings Congress : Nürnberg, Germany, 30.3. - 1.4. 2009
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  -