TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Rao, C.
A1  - Kloock, Joachim P.
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - “LAPS Card”—A novel chip card-based light-addressable potentiometric sensor (LAPS)
JF  - Sensors and Actuators B: Chemical. 118 (2006), H. 1-2
Y1  - 2006
SN  - 0925-4005
N1  - Eurosensors XIX - Eurosensors XIX - The 19th European Conference on Solid-State Transducers
SP  - 33
EP  - 40
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Molina, Roberto
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Biselli, Manfred
A1  - Canzoneri, Michele
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
T1  - Handheld multi-channel LAPS device as a transducer platform for possible biological and chemical multi-sensor applications
JF  - Electrochimica Acta. 53 (2007), H. 2
Y1  - 2007
SN  - 0013-4686
SP  - 305
EP  - 311
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Molina, R.
A1  - Biselli, Manfred
A1  - Canzoneri, Michele
A1  - Schnitzler, Thomas
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - A light-addressable potentiometric sensor system for fast, simultaneous and spatial detection of the metabolic activity of biological cells
JF  - Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)
Y1  - 2007
SN  - 1-4244-0841-5
N1  - Eurosensors 21, 2007, Lyon ; International Conference on Solid-State Sensors, Actuators and Microsystems 14, 2007, Lyon
SP  - 1107
EP  - 1110
PB  - IEEE
CY  - Piscataway
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, Ko-ichiro
A1  - Shigihara, Noriko
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Microfluidic systems with free definable sensor spots by an integrated light-addressable potentiometric sensor
JF  - Procedia Engineering. 25 (2011)
Y1  - 2011
SN  - 1877-7058
N1  - EurosensorsXXV ; Proc. Eurosensors XXV, September 4-7, 2011, Athens, Greece
SP  - 791
EP  - 794
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, Ko-ichiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Novel combination of digital light processing (DLP) and light-addressable potentiometric sensors (LAPS) for flexible chemical imaging
JF  - Procedia Engineering. 5 (2010)
Y1  - 2010
SN  - 1877-7058
N1  - Eurosensor XXIV Conference
SP  - 520
EP  - 523
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, K.
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Flexible electrochemical imaging with “zoom-in” functionality by using a new type of light-addressable potentiometric sensor
Y1  - 2011
N1  - 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS) , Date: 5-9 June 2011
SP  - 2133
EP  - 2135
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, K.
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Utilising Digital Micro-Mirror Device (DMD) as Scanning Light Source for Light-Addressable Potentiometric Sensors (LAPS)
Y1  - 2011
U6  - http://dx.doi.org/10.1166/sl.2011.1620
VL  - 9
IS  - 2
SP  - 812
EP  - 815
PB  - American Scientific Publishers
CY  - Stevenson Ranch, Calif.
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Maris, Rob J.
A1  - Ackermann, Hans-Josef
A1  - Otto, Ralph
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Handheld measurement device for field-effect sensor structures: Practical evaluation and limitations
JF  - Sensors and Actuators B: Chemical  . 127 (2007), H. 1
Y1  - 2007
SN  - 0925-4005
SP  - 217
EP  - 223
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Determination of cadmium concentration and pH value in aqueous solutions by means of a handheld light-addressable potentiometric sensor (LAPS) device
JF  - Electrochemical sensor analysis / edited by S. Alegret ...
Y1  - 2007
SN  - 978-0-444-53133-9
N1  - Wilson & Wilson's comprehensive analytical chemistry ; 49
SP  - e35
EP  - e44
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - JOUR
A1  - Wagner, Patrick
A1  - Doll, Theodor
A1  - Schöning, Michael Josef
T1  - Engineering of functional interfaces / Patrick Wagner ; Theodor Doll ; Michael J. Schöning (eds.)
JF  - Physica status solidi (A) : Applications and materials science
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201470241
SN  - 1521-396X (E-Book); 1862-6319 (E-Book); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1339
EP  - 1339
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Vögele, Stefan
A1  - Rübbelke, Dirk
A1  - Govorukha, Kristina
A1  - Grajewski, Matthias
T1  - Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany
JF  - Climatic Change
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s10584-019-02366-0
SN  - 0165-0009
SP  - 1
EP  - 16
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Vögele, Stefan
A1  - Josyabhatla, Vishnu Teja
A1  - Ball, Christopher
A1  - Rhoden, Imke
A1  - Grajewski, Matthias
A1  - Rübbelke, Dirk
A1  - Kuckshinrichs, Wilhelm
T1  - Robust assessment of energy scenarios from stakeholders' perspectives
JF  - Energy
N2  - Using scenarios is vital in identifying and specifying measures for successfully transforming the energy system. Such transformations can be particularly challenging and require the support of a broader set of stakeholders. Otherwise, there will be opposition in the form of reluctance to adopt the necessary technologies. Usually, processes for considering stakeholders' perspectives are very time-consuming and costly. In particular, there are uncertainties about how to deal with modifications in the scenarios. In principle, new consulting processes will be required. In our study, we show how multi-criteria decision analysis can be used to analyze stakeholders' attitudes toward transition paths. Since stakeholders differ regarding their preferences and time horizons, we employ a multi-criteria decision analysis approach to identify which stakeholders will support or oppose a transition path. We provide a flexible template for analyzing stakeholder preferences toward transition paths. This flexibility comes from the fact that our multi-criteria decision aid-based approach does not involve intensive empirical work with stakeholders. Instead, it involves subjecting assumptions to robustness analysis, which can help identify options to influence stakeholders' attitudes toward transitions.
Y1  - 2023
U6  - http://dx.doi.org/10.1016/j.energy.2023.128326
SN  - 1873-6785 (Online)
SN  - 0360-5442 (Print)
IS  - In Press, Article 128326
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Vögele, Stefan
A1  - Grajewski, Matthias
A1  - Govorukha, Kristina
A1  - Rübbelke, Dirk
T1  - Challenges for the European steel industry: Analysis, possible consequences and impacts on sustainable development
JF  - Applied Energy
N2  - The steel industry in the European Union (EU), important for the economy as a whole, faces various challenges. These are inter alia volatile prices for relevant input factors, uncertainties concerning the regulation of CO₂-emissions and market shocks caused by the recently introduced additional import duties in the US, which is an important sales market. We examine primary and secondary effects of these challenges on the steel industry in the EU and their impacts on European and global level. Developing and using a suitable meta-model, we analyze the competitiveness of key steel producing countries with respect to floor prices depending on selected cost factors and draw conclusions on the impacts in the trade of steel on emissions, energy demand, on the involvement of developing countries in the value chain as well on the need for innovations to avoid relocations of production. Hence, our study contributes to the assessment of sustainable industrial development, which is aimed by the Sustainability Development Goal “Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation countries”. By applying information on country-specific Human Development Indexes (reflecting aspects of life expectancy, education, and per capita income), we show that relocating energy-intensive industries from the EU may not only increase global energy demand and CO₂-emissions, but may also be to the disadvantage of developing countries.
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.apenergy.2020.114633
SN  - 0306-2619
VL  - 264
IS  - Article number: 114633
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Vu, Duc-Khoi
A1  - Staat, Manfred
T1  - An algorithm for shakedown analysis of structure with temperature dependent yield stress
N2  - This work is an attempt to answer the question: How to use convex programming in shakedown analysis of structures made of materials with temperature-dependent properties. Based on recently established shakedown theorems and formulations, a dual relationship between upper and lower bounds of the shakedown limit load is found, an algorithmfor shakedown analysis is proposed. While the original problem is neither convex nor concave, the algorithm presented here has the advantage of employing convex programming tools.
KW  - Einspielen <Werkstoff>
KW  - Temperaturabhängigkeit
KW  - Fließgrenze
KW  - Shakedown
KW  - shakedown analysis
KW  - yield stress
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
A1  - Tran, Ich Thinh
T1  - Analysis of pressure equipment by application of the primal-dual theory of shakedown
JF  - Communications in Numerical Methods in Engineering. 23 (2007), H. 3
Y1  - 2007
SN  - 1069-8299
SP  - 213
EP  - 225
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
T1  - Shakedown analysis of structures made of materials with temperature-dependent yield stress
JF  - International Journal of Solids and Structures. 44 (2007), H. 13
Y1  - 2007
SN  - 0020-7683
SP  - 4524
EP  - 4540
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - JOUR
A1  - Vlasov, Y. G.
A1  - Mourzina, Y. G.
A1  - Legin, A. V.
A1  - Ermelenko, Y. E.
A1  - Schubert, J.
A1  - Schöning, Michael Josef
A1  - Lüth, H.
T1  - Solid-state thin film sensors based on chalcogenide materials prepared by planar technology and pulsed laser deposition
JF  - Russian Journal of Applied Chemistry. 75 (2002), H. 3
Y1  - 2002
SN  - 1070-4272
SP  - 351
EP  - 356
ER  - 
TY  - JOUR
A1  - Vant, Christianne
A1  - Staat, Manfred
A1  - Baroud, Gamal
T1  - Percutaneous Vertebroplasty: A Review of Two Intraoperative Complications
JF  - Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)
Y1  - 2008
SN  - 978-3-540-75408-4
SP  - 527
EP  - 539
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Vahidpour, Farnoosh
A1  - Oberländer, Jan
A1  - Schöning, Michael Josef
T1  - Flexible Calorimetric Gas Sensors for Detection of a Broad Concentration Range of Gaseous Hydrogen Peroxide: A Step Forward to Online Monitoring of Food-Package Sterilization Processes
JF  - Phys. Status Solidi A
N2  - In this study, flexible calorimetric gas sensors are developed for specificdetection of gaseous hydrogen peroxide (H₂O₂) over a wide concentrationrange, which is used in sterilization processes for aseptic packaging industry.The flexibility of these sensors is an advantage for identifying the chemical components of the sterilant on the corners of the food boxes, so-called “coldspots”, as critical locations in aseptic packaging, which are of great importance. These sensors are fabricated on flexible polyimide films by means of thin-film technique. Thin layers of titanium and platinum have been deposited on polyimide to define the conductive structures of the sensors. To detect the high-temperature evaporated H₂O₂, a differential temperature set-up is proposed. The sensors are evaluated in a laboratory-scaled sterilizationsystem to simulate the sterilization process. The concentration range of the evaporated H₂O₂ from 0 to 7.7% v/v was defined and the sensors have successfully detected high as well as low H₂O₂ concentrations with a sensitivity of 5.04 °C/% v/v. The characterizations of the sensors confirm their precise fabrication, high sensitivity and the novelty of low H₂O₂ concentration detections for future inline monitoring of food-package sterilization.
Y1  - 2018
U6  - http://dx.doi.org/10.1002/pssa.201800044
VL  - 215
IS  - 15
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Firat, Ipek Serat
A1  - Creutz, Till
A1  - Aydin, Inci Cansu
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes
JF  - membranes
N2  - Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here.
Y1  - 2022
U6  - http://dx.doi.org/10.3390/membranes13010022
N1  - This article belongs to the Special Issue "Latest Scientific Discoveries in Polymer Membranes"
VL  - 2023
IS  - 13(1)
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Creutz, Till
A1  - Firat, Ipek Seda
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments
JF  - Polymers
N2  - Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3–4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.
Y1  - 2022
SN  - 2073-4360
VL  - 14
IS  - 11
SP  - 2213
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Ullrich, Sebastian
A1  - Grottke, Oliver
A1  - Rossaint, Rolf
A1  - Staat, Manfred
A1  - Deserno, Thomas M.
A1  - Kuhlen, Torsten
T1  - Virtual Needle Simulation with Haptics for Regional Anaesthesia
Y1  - 2010
N1  - IEEE Virtual Reality 2010, Workshop on Medical Virtual Environments, Waltham, MA, USA, March 21, 2010
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - JOUR
A1  - Turlybekuly, Amanzhol
A1  - Pogrebnjak, Alexander
A1  - Sukhodub, L. F.
A1  - Sukhodub, Liudmyla B.
A1  - Kistaubayeva, A. S.
A1  - Savitskaya, Irina
A1  - Shokatayeva, D. H.
A1  - Bondar, Oleksandr V.
A1  - Shaimardanov, Z. K.
A1  - Plotnikov, Sergey V.
A1  - Shaimardanova, B. H.
A1  - Digel, Ilya
T1  - Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix
JF  - Materials Science and Engineering C
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.msec.2019.109965
VL  - 104
IS  - Article number 109965
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Turek, Monika
A1  - Ketterer, Lothar
A1  - Claßen, Melanie
A1  - Berndt, Heinz
A1  - Elbers, Gereon
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development and Electrochemical Investigations of an EIS-(Electrolyte-Insulator-Semiconductor) based Biosensor for Cyanide Detection
JF  - Sensors
Y1  - 2007
SN  - 1424-8220
VL  - 7
IS  - 8
SP  - 1415
EP  - 1426
ER  - 
TY  - JOUR
A1  - Turek, Monik
A1  - Heiden, Wolfgang
A1  - Guo, Sharon
A1  - Riesen, Alfred
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 817
EP  - 823
ER  - 
TY  - JOUR
A1  - Turek, M.
A1  - Keusgen, M.
A1  - Poghossian, Arshak
A1  - Mulchandani, A.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - Enzyme-modified electrolyte-insulator-semiconductor sensors
JF  - Journal of Contemporary Physics. 43 (2008), H. 2
Y1  - 2008
SN  - 1934-9378
N1  - Armenian Academy of Sciences
SP  - 82
EP  - 85
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Saparbekova, A.
A1  - Akynova, L.
A1  - Abildayeva, R.
A1  - Sadenova, M.
A1  - Sartayeva, K.
A1  - Schieffer, Andre
A1  - Digel, Ilya
T1  - Species composition and injuriousness of stranger xylophilous fauna affecting indigenous urban dendroflora of Central Asia
JF  - Asian journal of microbiology, biotechnology & environmental sciences : AJMBES
N2  - At the present time, one of the most serious environmental problems of Central Asia and South Kazakhstan is the ongoing large-scale deterioration of principal urban tree populations. Several major centers of massive spread of invasive plant pests have been found in urban dendroflora of this region. The degree of damage of seven most wide-spread aboriginal tree species was found to range from 21.4±1.1 to 85.4±1.8%. In particular, the integrity of the native communities of sycamore (Platanus spp.), willow (Salix spp.), poplar (Populus spp.) and elm (Ulmus spp.) is highly endangered. Our taxonomic analysis of the most dangerous tree pests of the region has revealed them as neobiontic xylophilous insects such as Cossus cossus L. (Order: Lepidoptera L.) Monochamus urussovi Fisch., Monochamus sutor L., Acanthocinus aedelis L. and Ñetonia aureate L. (Order: Coleoptera L.). We relate the origin of this threatening trend with the import of industrial wood in the mid 90’s of the last century that was associated with high degree of the constructional work in the region. Because of the absence of efficient natural predators of the pest species, the application of microbiological methods of the pest control and limitation is suggested.
Y1  - 2016
SN  - 0972-3005
VL  - 18
IS  - 2
SP  - 359
EP  - 366
PB  - EM International
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Digel, Ilya
A1  - Elibayeva, G.
A1  - Sydykova, A.
A1  - Uspabayeva, A.
A1  - Dosybayeva, G.
A1  - Zhylysbayeva, A.
A1  - Lakhanova, K.
T1  - Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L
JF  - Life science journal
N2  - The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium – F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 % respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.
Y1  - 2014
U6  - http://dx.doi.org/10.7537/marslsj1105s14.33
SN  - 1097-8135
VL  - 11
IS  - Spec. iss. 5s
SP  - 171
EP  - 175
PB  - Marsland Press
CY  - New York
ER  - 
TY  - JOUR
A1  - Trzewik, Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Linder, Peter
A1  - Demirci, T.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Evaluation of lateral mechanical tension in thin-film tissue constructs
JF  - Annals of Biomedical Engineering. 32 (2004), H. 9
Y1  - 2004
SN  - 1573-9686
SP  - 1243
EP  - 1251
ER  - 
TY  - THES
A1  - Trzewik, Jürgen
T1  - Experimental analysis of biaxial mechanical tension in cell monolayers and cultured three-dimensional tissues: the celldrum technology
Y1  - 2007
N1  - Zugl.: Ilmenau, Techn. Univ., Diss., 2007
PB  - Univeristätsverlg Ilmenau
CY  - Ilmenau
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties
JF  - Limit State of Materials and Structures : Direct Methods 2. Saxcé, Géry de (Hrsg.)
Y1  - 2013
SN  - 978-94-007-5424-9
SP  - 89
EP  - 102
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method
T2  - Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.
N2  - This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.
Y1  - 2014
SN  - 978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)
U6  - http://dx.doi.org/10.1007/978-94-007-6827-7_5
SP  - 101
EP  - 117
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Uncertainty multimode failure and shakedown analysis of shells
T2  - Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...
N2  - This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.
KW  - Limit analysis
KW  - Shakedown analysis
KW  - Reliability analysis
KW  - Multimode failure
KW  - Non-linear optimization
Y1  - 2015
SN  - 978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)
U6  - http://dx.doi.org/10.1007/978-3-319-12928-0_14
SP  - 279
EP  - 298
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Vu, D. K.
A1  - Staat, Manfred
T1  - Reliability Analysis of Inelastic Shell Structures Under Variable Loads
JF  - Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter
Y1  - 2009
SN  - 978-1-4020-9633-4
SP  - 135
EP  - 156
PB  - Springer Netherland
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - Reliability analysis of shells based on direct plasticity methods
N2  - Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis
N2  - Abstracts of the Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30th - July, 4th 2008, Venice, Italy. 2 pages with abstracts of the authors, Ill. and references.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
KW  - First-order reliability method
KW  - second-order reliability method
KW  - Sensitivity
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Novacek, V.
A1  - Tolba, R.
A1  - Klinge, U.
A1  - Turquier, F.
A1  - Staat, Manfred
T1  - Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011
N2  - Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.
KW  - Anastomose
KW  - Finite-Elemente-Methode
KW  - Biomechanik
KW  - Anastomosis
KW  - Finite element method
KW  - Biomechanics
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Kreißig, R.
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
T1  - Upper bound limit and shakedown analysis of shells using the exact Ilyushin yield surface
JF  - Computer & Structures. 86 (2008)
Y1  - 2008
SN  - 0045-7949
SP  - 1683
EP  - 1695
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Kreißig, R.
A1  - Staat, Manfred
T1  - Probabilistic limit and shakedown analysis of thin plates and shells
JF  - Structural safety. 31 (2009), H. 1
Y1  - 2009
SN  - 0167-4730
SP  - 1
EP  - 18
PB  - -
ER  - 
TY  - THES
A1  - Tran, Thanh Ngoc
T1  - Limit and shakedown analysis of plates and shells including uncertainties
Y1  - 2008
N1  - Chemnitz, Techn. Univ., Diss., 2008
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Trinh, Tu Luc
A1  - Dao, Ngoc Tien
A1  - Giap, Van Tan
A1  - Truong, Manh Khuyen
A1  - Dinh, Thuy Ha
A1  - Staat, Manfred
T1  - Limit and shakedown analysis of structures under random strength
T2  - Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training, Hanoi, December 2-3, 2022
N2  - Direct methods comprising limit and shakedown analysis is a branch of computational mechanics. It plays a significant role in mechanical and civil engineering design. The concept of direct method aims to determinate the ultimate load bearing capacity of structures beyond the elastic range. For practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and onstraints. If strength and loading are random quantities, the problem of shakedown analysis is considered as stochastic programming. This paper presents a method so called chance constrained programming, an effective method of stochastic programming, to solve shakedown analysis problem under random condition of strength. In this our investigation, the loading is deterministic, the strength is distributed as normal or lognormal variables.
KW  - Reliability of structures
KW  - Stochastic programming
KW  - Chance constrained programming
KW  - Shakedown analysis
KW  - Limit analysis
Y1  - 2022
SN  - 978-604-357-084-7
SP  - 510
EP  - 518
PB  - Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)
CY  - Hanoi
ER  - 
TY  - JOUR
A1  - Tran, Ngoc Trinh
A1  - Trinh, Tu Luc
A1  - Dao, Ngoc Tien
A1  - Giap, Van Tan
A1  - Truong, Manh Khuyen
A1  - Dinh, Thuy Ha
A1  - Staat, Manfred
T1  - FEM shakedown analysis of structures under random strength with chance constrained programming
JF  - Vietnam Journal of Mechanics
N2  - Direct methods, comprising limit and shakedown analysis, are a branch of computational mechanics. They play a significant role in mechanical and civil engineering design. The concept of direct methods aims to determine the ultimate load carrying capacity of structures beyond the elastic range. In practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and constraints. If strength and loading are random quantities, the shakedown analysis can be formulated as stochastic programming problem. In this paper, a method called chance constrained programming is presented, which is an effective method of stochastic programming to solve shakedown analysis problems under random conditions of strength. In this study, the loading is deterministic, and the strength is a normally or lognormally distributed variable.
KW  - limit analysis
KW  - shakedown analysis
KW  - chance constrained programming
KW  - stochastic programming
KW  - reliability of structures
Y1  - 2022
U6  - http://dx.doi.org/10.15625/0866-7136/17943
SN  - 0866-7136
SN  - 2815-5882
VL  - 44
IS  - 4
SP  - 459
EP  - 473
PB  - Vietnam Academy of Science and Technology (VAST)
ER  -