TY  - CHAP
A1  - Schulze-Buxloh, Lina
A1  - Groß, Rolf Fritz
T1  - Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions
T2  - New Perspectives in Science Education -International Conference (virtual event, 18-19 March 2021)
N2  - In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.
KW  - Freshmen
KW  - roleplay
KW  - Smart Building Engineering
KW  - BIM
KW  - remote teamwork
Y1  - 2021
N1  - New Perspectives in Science Education - 10th Edition
18-19 March 2021
Fully Virtual Conference
PB  - Filodiritto
CY  - Bologna
ER  - 
TY  - CHAP
A1  - Schulze, Sven
A1  - Mühleisen, M.
A1  - Feyerl, Günter
T1  - Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology
T2  - 18. Internationales Stuttgarter Symposium. Proceedings
Y1  - 2018
U6  - http://dx.doi.org/10.1007/978-3-658-21194-3
SP  - 75
EP  - 89
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Schulte-Tigges, Joschua
A1  - Matheis, Dominik
A1  - Reke, Michael
A1  - Walter, Thomas
A1  - Kaszner, Daniel
ED  - Krömker, Heidi
T1  - Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain
T2  - HCII 2023: HCI in Mobility, Transport, and Automotive Systems
N2  - Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle’s software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.
KW  - V2X
KW  - Transiton of Control
KW  - Minimum Risk Manoeuvre
KW  - Operational Design Domain
KW  - Connected Automated Vehicle
Y1  - 2023
SN  - 978-3-031-35677-3 (Print)
SN  - 978-3-031-35678-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-35678-0_12
N1  - 5th International Conference, MobiTAS 2023, Held as Part of the 25th HCI International Conference, HCII 2023, Copenhagen, Denmark, July 23–28, 2023.
SP  - 200
EP  - 210
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schulte, Maximilian
A1  - Eggert, Mathias
T1  - Predicting hourly bitcoin prices based on long short-term memory neural networks
T2  - Proceedings of the International Conference on Wirtschaftsinformatik (WI) 2021
N2  - Bitcoin is a cryptocurrency and is considered a high-risk asset
class whose price changes are difficult to predict. Current research focusses
on daily price movements with a limited number of predictors. The paper at
hand aims at identifying measurable indicators for Bitcoin price movement s
and the development of a suitable forecasting model for hourly changes. The
paper provides three research contributions. First, a set of significant
indicators for predicting the Bitcoin price is identified. Second, the results of
a trained Long Short-term Memory (LSTM) neural network that predicts
price changes on an hourly basis is presented and compared with other
algorithms. Third, the results foster discussions of the applicability of neural
nets for stock price predictions. In total, 47 input features for a period of
over 10 months could be retrieved to train a neural net that predicts the
Bitcoin price movements with an error rate of 3.52 %.
Y1  - 2021
N1  - 16th International Conference on Wirtschaftsinformatik,
March 2021, Essen, Germany
ER  - 
TY  - CHAP
A1  - Schulte, Jonas
A1  - Schwager, Christian
A1  - Noureldin, Kareem
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation
T2  - SolarPACES: Solar Power & Chemical Energy Systems
N2  - The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.
KW  - Power plants
KW  - Energy storage
KW  - Associated liquids
Y1  - 2023
SN  - 978-0-7354-4623-6
U6  - http://dx.doi.org/10.1063/5.0148741
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - 27th International Conference on Concentrating Solar Power and Chemical Energy Systems
27 September–1 October 2021
Online
IS  - 2815 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Schulte, Jonas
A1  - Schwager, Christian
A1  - Frantz, Cathy
A1  - Schloms, Felix
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Control concept for a molten salt receiver in star design: Development, optimization and testing with cloud passage scenarios
T2  - SolarPACES conference proceedings
N2  - A promising approach to reduce the system costs of molten salt solar receivers is to enable the irradiation of the absorber tubes on both sides. The star design is an innovative receiver design, pursuing this approach. The unconventional design leads to new challenges in controlling the system. This paper presents a control concept for a molten salt receiver system in star design. The control parameters are optimized in a defined test cycle by minimizing a cost function. The control concept is tested in realistic cloud passage scenarios based on real weather data. During these tests, the control system showed no sign of unstable behavior, but to perform sufficiently in every scenario further research and development like integrating Model Predictive Controls (MPCs) need to be done. The presented concept is a starting point to do so.
KW  - Molten salt receiver
KW  - Star design
KW  - Control optimization
KW  - Cloud passages
Y1  - 2023
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.693
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - Vol. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Schuh, Günther
A1  - Gottschalk, Sebastian
A1  - Höhne, Tim
A1  - Attig, Philipp
ED  - Mitsuishi, M.
T1  - Further Potentials of Smart Logistics
T2  - Manufacturing Systems and Technologies for the New Frontier
Y1  - 2008
SN  - 978-1-84800-267-8
SN  - 978-1-84800-266-1 (Printausgabe)
U6  - http://dx.doi.org/10.1007/978-1-84800-267-8_18
N1  - The 41St Cirp Conference On Manufacturing Systems, May 26-28, 2008, Tokyo, Japan
SP  - 93
EP  - 96
PB  - Springer
CY  - London
ER  - 
TY  - CHAP
A1  - Schuh, Günther
A1  - Gottschalk, Sebastian Friedrich
A1  - Narr, Claus
A1  - Höhne, Tim
ED  - Zäh, Michael F.
T1  - Adaptive logistics : information management for planning and control of small series assembly
T2  - 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts
Y1  - 2007
SN  - 978-0-9783187-0-3
SP  - 212
EP  - 221
ER  - 
TY  - CHAP
A1  - Schuba, Marko
A1  - Höfken, Hans-Wilhelm
A1  - Linzbach, Sophie
T1  - An ICS Honeynet for Detecting and Analyzing Cyberattacks in Industrial Plants
T2  - 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)
N2  - Cybersecurity of Industrial Control Systems (ICS) is an important issue, as ICS incidents may have a direct impact on safety of people or the environment. At the same time the awareness and knowledge about cybersecurity, particularly in the context of ICS, is alarmingly low. Industrial honeypots offer a cheap and easy to implement way to raise cybersecurity awareness and to educate ICS staff about typical attack patterns. When integrated in a productive network, industrial honeypots may not only reveal attackers early but may also distract them from the actual important systems of the network. Implementing multiple honeypots as a honeynet, the systems can be used to emulate or simulate a whole Industrial Control System. This paper describes a network of honeypots emulating HTTP, SNMP, S7communication and the Modbus protocol using Conpot, IMUNES and SNAP7. The nodes mimic SIMATIC S7 programmable logic controllers (PLCs) which are widely used across the globe. The deployed honeypots' features will be compared with the features of real SIMATIC S7 PLCs. Furthermore, the honeynet has been made publicly available for ten days and occurring cyberattacks have been analyzed
KW  - Conpot
KW  - honeypot
KW  - honeynet
KW  - ICS
KW  - cybersecurity
Y1  - 2022
SN  - 978-1-6654-4231-2
SN  - 978-1-6654-4232-9
U6  - http://dx.doi.org/10.1109/ICECET52533.2021.9698746
N1  - 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET). 09-10 December 2021. Cape Town, South Africa.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Cost-efficient quality assurance of natural language processing tools through continuous monitoring with continuous integration
T2  - 3rd International Workshop on Software Engineering Research and Industrial Practice
Y1  - 2016
U6  - http://dx.doi.org/10.1145/2897022.2897029
N1  - SER&IP’16, May 17 2016, Austin, TX, USA
SP  - 46
EP  - 52
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
ED  - Bilof, Randall
T1  - Metrics driven research collaboration: focusing on common project goals continuously
T2  - Proceedings : 2017 IEEE/ACM 4th International Workshop on Software Engineering Research and Industrial Practice : SER&IP 2017 : 21 May 2017 Buenos Aires, Argentina
Y1  - 2017
SN  - 978-1-5386-2797-6
U6  - http://dx.doi.org/10.1109/SER-IP.2017..6
SP  - 41
EP  - 47
PB  - IEEE Press
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - NLP Lean Programming Framework: Developing NLP Applications More Effectively
T2  - Proceedings of NAACL-HLT 2018: Demonstrations, New Orleans, Louisiana, June 2 - 4, 2018
N2  - This paper presents NLP Lean Programming
framework (NLPf), a new framework
for creating custom natural language processing
(NLP) models and pipelines by utilizing
common software development build systems.
This approach allows developers to train and
integrate domain-specific NLP pipelines into
their applications seamlessly. Additionally,
NLPf provides an annotation tool which improves
the annotation process significantly by
providing a well-designed GUI and sophisticated
way of using input devices. Due to
NLPf’s properties developers and domain experts
are able to build domain-specific NLP
applications more efficiently. NLPf is Opensource
software and available at https://
gitlab.com/schrieveslaach/NLPf.
Y1  - 2018
U6  - http://dx.doi.org/10.18653/v1/N18-5001 
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Hirtbach, Stefan
A1  - Kraft, Bodo
A1  - Steinmetzler, Andreas
ED  - Kowalewski, Stefan
T1  - Software in the city: visual guidance through large scale software projects
T2  - Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. März 2013 in Aachen. (GI-Edition ; 213)
Y1  - 2013
SN  - 978-3-88579-607-7 ; 978-3-88579-609-1
SP  - 213
EP  - 224
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Barkschat, Kai
A1  - Kraft, Bodo
T1  - Using Continuous Integration to organize and monitor the annotation process of domain specific corpora
T2  - 5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien
Y1  - 2014
SN  - 978-1-4799-3022-7
U6  - http://dx.doi.org/10.1109/IACS.2014.6841958
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Schoutetens, Frederic
A1  - Dachwald, Bernd
A1  - Heiligers, Jeannette
T1  - Optimisation of photon-sail trajectories in the alpha-centauri system using evolutionary neurocontrol
T2  - 8th ICATT (International Conference on Astrodynamics Tools and Techniques) 23 - 25 June 2021, Virtual
N2  - With the increased interest for interstellar exploration after the discovery of exoplanets and the proposal by Breakthrough Starshot, this paper investigates the optimisation of photon-sail trajectories in Alpha Centauri. The prime objective is to find the optimal steering strategy for a photonic sail to get captured around one of the stars after a minimum-time transfer from Earth. By extending the idea of the Breakthrough Starshot project with a deceleration phase upon arrival, the mission’s scientific yield will be increased. As a secondary objective, transfer trajectories between the stars and orbit-raising manoeuvres to explore the habitable zones of the stars are investigated. All trajectories are optimised for minimum time of flight using the trajectory optimisation software InTrance. Depending on the sail technology, interstellar travel times of 77.6-18,790 years can be achieved, which presents an average improvement of 30% with respect to previous work. Still, significant technological development is required to reach and be captured in the Alpha-Centauri system in less than a century. Therefore, a fly-through mission arguably remains the only option for a first exploratory mission to Alpha Centauri, but the enticing results obtained in this work provide perspective for future long-residence missions to our closest neighbouring star system.
Y1  - 2021
N1  - 8th ICATT (International Conference on Astrodynamics Tools and Techniques)
23 - 25 June 2021, Virtual
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Nachtrodt, Frederik
A1  - Heuermann, Holger
A1  - Scherer, Ulrich W.
A1  - Mostacci, Domiziano
A1  - Finger, Torsten
A1  - Tietsch, Wolfgang
T1  - A novel 2.45 GHz/200 W Microwave Plasma Jet for High Temperature Applications above 3600 K
T2  - Journal of Physics : Conference Series
Y1  - 2012
SN  - 1742-6596
VL  - 406
IS  - 012029
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Marso, Michel
T1  - Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet
T2  - IEEE Transactions on Plasma Science
Y1  - 2017
U6  - http://dx.doi.org/10.1109/TPS.2017.2692735
SN  - 1939-9375
VL  - 45
IS  - 6
SP  - 932
EP  - 937
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Holtrup, S.
T1  - Investigation on efficacy optimization of RF-driven automotive D-lamps
T2  - 44th European Microwave Conference (EuMC),2014, Rome
Y1  - 2014
U6  - http://dx.doi.org/10.1109/EuMC.2014.6986645
SP  - 1154
EP  - 1157
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
T1  - Electrodeless low pressure lamp with bi-static matching at 2.45 GHz
T2  - 2013 European Microwave Conference (EuMC) , Nuremberg
Y1  - 2013
SN  - 978-1-4799-0264-4
SP  - 881
EP  - 884
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schopen, Oliver
A1  - Shabani, Bahman
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Shah, Neel
ED  - Rahim, S.A.
ED  - As'arry, A.
ED  - Zuhri, M.Y.M.
ED  - Harmin, M.Y.
ED  - Rezali, K.A.M.
ED  - Hairuddin, A.A.
T1  - Quantitative evaluation of health management designs for fuel cell systems in transport vehicles
T2  - 2nd UNITED-SAIG International Conference Proceedings
N2  - Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified.
KW  - aviation application
KW  - health management systems
KW  - fuel cell systems
Y1  - 2022
N1  - 2nd UNITED-SAIG International Conference, 23-24 May 2022, Putrajaya, Malaysia
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Schopen, Oliver
A1  - Kemper, Hans
A1  - Esch, Thomas
T1  - Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC
T2  - Proceedings of the 1st UNITED – Southeast Asia Automotive Interest Group (SAIG) International Conference
N2  - In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.
KW  - electro mobility
KW  - fuel cell
KW  - internal combustion engine
KW  - electrically driven compressors
Y1  - 2021
SN  - 978-3-902103-94-9
N1  - 1st UNITED-SAIG International Conference, 21-22 APR 2021, Chulalongkorn University, Thailand
SP  - 45
EP  - 46
PB  - FH Joanneum
CY  - Graz
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Suder, Sebastian
A1  - Schiffer, Stefan
T1  - Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2018
Y1  - 2018
SN  - 978-3-662-56537-7
U6  - http://dx.doi.org/10.1007/978-3-662-56537-7_79
SP  - 297
EP  - 302
PB  - Springer Vieweg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Bartella, Alex
A1  - Moluluo, Cem
A1  - Ertural, Berat
A1  - Laing, Frederic
A1  - Suder, Sebastian
T1  - MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2019 : Algorithmen – Systeme – Anwendungen
Y1  - 2019
SN  - 978-3-658-25326-4
U6  - http://dx.doi.org/10.1007/978-3-658-25326-4_32
SP  - 152
EP  - 157
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Schnell, Michael
A1  - Franzen, Nico
A1  - Gligorevic, Snjezana
T1  - L-DACS1 laboratory demonstrator development and compatibility measurement set-up
T2  - IEEE/AIAA 29th Digital Avionics Systems Conference (DASC) : 3 - 7 Oct. 2010, Salt Lake City, Utah
Y1  - 2010
SN  - 9781424466160 ; 9781424466184
SP  - 3E3-1
EP  - 3E3-11
ER  - 
TY  - CHAP
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Walter, M.
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
A1  - Haindl, Bernhard
T1  - Interference mitigation for broadband L-DACS
T2  - 27th IEEE/AIAA Digital Avionics Systems Conference : DASC 2008 : 26-30 Oct. 2008, St. Paul, Minn.
Y1  - 2008
SN  - 978-1-4244-2207-4 ; 978-1-4244-2208-1
SP  - 2B2-1
EP  - 2B2-12
ER  - 
TY  - CHAP
A1  - Schneider, Oliver
A1  - Al Hakim, Taher
A1  - Kayser, Peter
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Development and trials of a test chamber for ultrasound-assisted sampling of living cells from solid surfaces
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 96
EP  - 97
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schneckenburger, N.
A1  - Franzen, N.
A1  - Gligorevic, Snjezana
A1  - Schnell, M.
T1  - L-band compatibility of LDACS1
T2  - IEEE/AIAA 30th Digital Avionics Systems Conference (DASC) : 16 - 20 Oct. 2011, Seattle, Wash.
Y1  - 2011
SN  - 978-1-61284-797-9
SN  - 2155-7195
SP  - 4C3-1
EP  - 4C3-11
ER  - 
TY  - CHAP
A1  - Schnabel, Eberhard
A1  - Berndt, Heinz
ED  - Nesvadba, H.
T1  - Zur selektive Abspaltbarkeit der t-Butyloxycarbonylgruppe
T2  - Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971
Y1  - 1973
SN  - 0-7204-4120-X
SP  - 69
EP  - 70
PB  - North-Holland Publ. [u.a.]
CY  - Amsterdam [u.a.]
ER  - 
TY  - CHAP
A1  - Schmitz, Annika
A1  - Apandi, Shah Eiman Amzar Shah
A1  - Spillner, Jan
A1  - Hima, Flutura
A1  - Behbahani, Mehdi
ED  - Digel, Ilya
ED  - Staat, Manfred
ED  - Trzewik, Jürgen
ED  - Sielemann, Stefanie
ED  - Erni, Daniel
ED  - Zylka, Waldemar
T1  - Effect of different cannula positions in the pulmonary artery on blood flow and gas exchange using computational fluid dynamics analysis
T2  - 4th YRA MedTech Symposium 2024 : February 1 / 2024 / FH Aachen
N2  - Pulmonary arterial cannulation is a common and effective method for percutaneous mechanical circulatory support for concurrent right heart and respiratory failure [1]. However, limited data exists to what effect the positioning of the cannula has on the oxygen perfusion throughout the pulmonary artery (PA). This study aims to evaluate, using computational fluid dynamics (CFD), the effect of different cannula positions in the PA with respect to the oxygenation of the different branching vessels in order for an optimal cannula position to be determined. The four chosen different positions (see Fig. 1) of the cannulas are, in the lower part of the main pulmonary artery (MPA), in the MPA at the junction between the right pulmonary artery (RPA) and the left pulmonary artery (LPA), in the RPA at the first branch of the RPA and in the LPA at the first branch of the LPA.
Y1  - 2024
SN  - 978-3-940402-65-3
U6  - http://dx.doi.org/10.17185/duepublico/81475
SP  - 29
EP  - 30
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA
Y1  - 2020
SN  - 978-989-758-440-4
U6  - http://dx.doi.org/10.5220/0009831000900101
SP  - 90
EP  - 101
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - http://dx.doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Siebigteroth, Ines
A1  - Zündorf, Albert
T1  - Schema Matching with Frequent Changes on Semi-Structured Input Files: A Machine Learning Approach on Biological Product Data
T2  - Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS
Y1  - 2019
SN  - 978-989-758-372-8
U6  - http://dx.doi.org/10.5220/0007723602080215
SP  - 208
EP  - 215
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Schreiber, Marc
A1  - Zündorf, Albert
T1  - Continuously evaluated research projects in collaborative decoupled environments
T2  - 2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER&IP' 18
N2  - Often, research results from collaboration projects are not transferred into productive environments even though approaches are proven to work in demonstration prototypes. These demonstration prototypes are usually too fragile and error-prone to be transferred
easily into productive environments. A lot of additional work is required.
Inspired by the idea of an incremental delivery process, we introduce an architecture pattern, which combines the approach of Metrics Driven Research Collaboration with microservices for the ease of integration. It enables keeping track of project goals over the course of the collaboration while every party may focus on their expert skills: researchers may focus on complex algorithms,
practitioners may focus on their business goals.
Through the simplified integration (intermediate) research results can be introduced into a productive environment which enables
getting an early user feedback and allows for the early evaluation of different approaches. The practitioners’ business model benefits throughout the full project duration.
Y1  - 2018
SP  - 1
EP  - 9
PB  - ACM
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Boltes, Maik
A1  - Kraft, Bodo
A1  - Schreiber, Marc
T1  - Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers
T2  - 2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan
Y1  - 2017
N1  - International Conference on Indoor Positioning and Indoor Navigation <8, 2017, Sapporo, Japan>
SP  - 1
EP  - 4
ER  - 
TY  - CHAP
A1  - Schmidt, Thomas
A1  - Kasch, Susanne
A1  - Eichler, Fabian
A1  - Thurn, Laura
T1  - Process strategies on laser-based melting of glass powder
T2  - Lasers in Manufacturing Conference 2021
N2  - This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component’s material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.
KW  - 3D-printing
KW  - glass
KW  - additive manufactureing
KW  - laser based powder fusion
Y1  - 2021
ER  - 
TY  - CHAP
A1  - Schmid, Beat F.
A1  - Lindemann, Markus
T1  - Elements of a reference model for electronic markets
T2  - System sciences : proceedings. Vol. 4: Internet and the digital economy track / Thirty-first Hawaii International Conference on Systems Science : HICSS'98, Big Island of Hawaii, January 6-9, 1998 / ed. by Robert W. Blanning and David R. King. IEEE catalog ; 98TB100216
Y1  - 1998
SN  - 0-8186-8242-6
SP  - 193
EP  - 201
PB  - IEEE Computer Society Pr.
CY  - Los Alamos, CA
ER  - 
TY  - CHAP
A1  - Schlurmann, Torsten
A1  - Bung, Daniel B.
T1  - Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam
T2  - Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung
Y1  - 2012
SP  - 7
EP  - 14
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
A1  - Dahmann, Peter
T1  - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines
T2  - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)
Y1  - 2017
SN  - 978-3-319-49058-8
U6  - http://dx.doi.org/10.1007/978-3-319-49058-8_34
N1  - Advances in Robot Design and Intelligent Control ; Vol. 540
SP  - 310
EP  - 319
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
T1  - The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance
T2  - 17th European Conference on Composite Materials – ECCM, Munich, Germany
Y1  - 2016
N1  - ECCM 17
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Schlenkhoff, Andreas
A1  - Bung, Daniel B.
T1  - Prediction of oxygen transfer in self-aerated skimming flow on embankment stepped spillways
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Schlemmer, Katharina
A1  - Porst, Dariusz
A1  - Bassam, Rasha
A1  - Artmann, Gerhard
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Effects of nitric oxide (NO) and ATP on red blood cell phenotype and deformability
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 100
EP  - 101
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - J., Watmuff
T1  - Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design
T2  - 62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft
Y1  - 2013
SP  - 1
EP  - 8
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Bauschat, J.-Michael
A1  - Watmuff, J.H.
T1  - Accurate induced drag prediction for highly non-planar lifting systems
T2  - 19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia
N2  - The impact of wake model effects is investigated for two highly
non-planar lifting systems. Dependent on the geometrical
arrangement of the configuration, the wake model shape is found
to considerably affect the estimation. Particularly at higher angles
of attack, an accurate estimation based on the common linear wake
model approaches is involved.
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Schildt, Philipp
A1  - Marzocca, Pier
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Keimer, Jona
T1  - Effects of atmospheric excitation on vibration based condition monitoring methods for hybrid-electric aircraft propulsion systems
T2  - AIAC 2018: 18th Australian International Aerospace Congress: HUMS - 11th Defence Science and Technology (DST) International Conference on Health and Usage Monitoring (HUMS 2019): ISSFD - 27th International Symposium on Space Flight Dynamics (ISSFD)
Y1  - 2019
SN  - 9781925627213
SP  - 923
EP  - 928
ER  - 
TY  - CHAP
A1  - Schildt, P.
A1  - Braun, Carsten
A1  - Marcocca, P.
T1  - Flight testing the extra 330LE flying testbed
T2  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017
Y1  - 2017
SN  - 978-151085387-4
N1  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017, SFTE 2017; Destin; United States; 30 October 2017 through 2 November 2017
SP  - 349
EP  - 362
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Fuzzy representations and control for domestic service robots in Golog
T2  - Intelligent robotics and applications : 4th International conference, ICIRA 2011, Aachen, Germany, December 6-8, 2011, proceedings, part I. (Lecture notes in computer science ; 7102)
Y1  - 2011
SN  - 978-3-642-25486-4
SP  - 241
EP  - 250
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  -