TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - JOUR
A1  - Weihe, Stefan
A1  - Ernst, Ansgar
A1  - Röth, Thilo
A1  - Proksch, Johannes
T1  - Aluminium-Stahl-Verbundguss im Nutzfahrzeugbau
JF  - ATZ - Automobiltechnische Zeitschrift
N2  - In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH & Co. KG wird das Leichtbaupotenzial von Aluminiumverbundguss-Stahlblech-Hybriden am Beispiel des vorderen Dachquerträgers des Mercedes-Benz Viano/Vito ausführlich untersucht.
Y1  - 2013
SN  - 2192-8800 (Online)
SN  - 0001-2785 (Print)
VL  - 115
IS  - 4
SP  - 312
EP  - 316
PB  - Springer Fachmedien Wiesbaden
ER  - 
TY  - JOUR
A1  - Weihe, Stefan
A1  - Ansgar, Ernst
A1  - Röth, Thilo
A1  - Proksch, Johannes
T1  - Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau
JF  - Lightweight Design
N2  - In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen
zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding
GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler
Tooling GmbH & Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden
am Beispiel des vorderen Dachquerträgers des Mercedes-Benz Viano/Vito ausführlich
untersucht.
Y1  - 2013
SN  - 2192-8738 (Online)
SN  - 1865-4819 (Print)
VL  - 6
IS  - 2
SP  - 38
EP  - 43
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
A1  - Collani, E. v.
A1  - Saniga, E.M.
T1  - Economic Adjustment Design for -Control Charts. E.v.Collani, E.M. Saniga, Ch. Weigand
JF  - IIE Transactions / Institute of Industrial Engineers. 26 (1994), H. 6
Y1  - 1994
SN  - 0569-5554
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Optimal Production Schedule for a K Products Single Machine Problem
JF  - Economic Quality Control. 9 (1994)
Y1  - 1994
SN  - 0940-5151
SP  - 91
EP  - 101
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Optimale Maschinenjustierung
JF  - Technische Hochschule <Ilmenau> / Bibliothek: Wissenschaftliche Zeitschrift. 37 (1991)
Y1  - 1991
SN  - 0043-6917
SP  - 167
EP  - 175
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - A Solution to the Scheduling Problem Taking into Account Quality
JF  - Operations research '91 : extended abstracts of the 16th Symposium on Operations Research held at the University of Trier at September 9 - 11, 1991 / [GMÖOR]. Peter Gritzmann ... (eds.)
Y1  - 1991
SN  - 3790806080
N1  - Symposium on Operations Research ; (16, 1991, Trier)
SP  - 373
EP  - 375
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Optimal Adjustment Policies
JF  - Proceedings of the First Umeå-Würzburg Conference in Statistics : Kronlund Conference Center and University of Umeå, September 10 - 14, 1990 / ed. by Kurt Brännäs
Y1  - 1990
SN  - 91-7174-564-5
N1  - Umeå-Würzburg Conference in Statistics <1, 1990>
SP  - 147
EP  - 158
PB  - Univ. of Umeå
CY  - Umeå
ER  - 
TY  - BOOK
A1  - Weigand, Christoph
T1  - Statistik mit und ohne Zufall : eine anwendungsorientierte Einführung ; mit 10 Tabellen / Christoph Weigand
Y1  - 2006
SN  - 3-7908-1693-0
N1  - [Neuere Aufl. vorh.] https://doi.org/10.1007/978-3-662-59309-7
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Technically Optimal Inspection Policy with Arithmetical Adaption
JF  - IMA Journal of Management Mathematics. 14 (2003), H. 4
Y1  - 2003
SN  - 1471-678X
N1  - weitere ISSN 1471-6798 (E)
SP  - 357
EP  - 371
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Economically Optimal Inspection Policy with Geometrical Adaption
JF  - Journal of Applied Statistics. 30 (2003), H. 5
Y1  - 2003
SN  - 0266-4763
N1  - weitere ISSN 1360-0532 (E)
SP  - 555
EP  - 569
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Economically Optimal Inspection Policy with Arithmetical Adaption
JF  - Applied stochastic models and data analysis / [10th International Symposium on Applied Stochastic Models and Analysis, June 12-15 2001, Université Technologique de Compiègne] ; editors Gérard Govaert, Jacques Janssen, Nikolaos Limnios.
Y1  - 2001
N1  - ASDMA 2001
SP  - 1010
EP  - 1015
PB  - Université Technologique de Compiègne
CY  - Compiègne
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Economically Optimal Adaptive Inspection Policies
JF  - Economic Quality Control. 15 (2000), H. 1/2
Y1  - 2000
SN  - 0940-5151
N1  - Printausgabe vorhanden: 43 Z 711
SP  - 55
EP  - 77
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Economic Machine Adjustment in the Case of Product Screening .E.v.Collani, Ch. Weigand
JF  - Statistical Papers. 33 (1992)
Y1  - 1992
SP  - 171
EP  - 184
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - On the Effects of SPC on Production Time
JF  - Economic Quality Control. 8 (1993)
Y1  - 1993
SN  - 0940-5151
SP  - 23
EP  - 61
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - A new Approach for Optimal Control of a Production process
JF  - Economic Quality Control. 7 (1992)
Y1  - 1992
SN  - 0940-5151
SP  - 225
EP  - 251
ER  - 
TY  - BOOK
A1  - Weigand, Christoph
T1  - Statistik mit und ohne Zufall : Eine anwendungsorientierte Einführung . 2. Aufl.
Y1  - 2009
SN  - 978-3-7908-2346-2
N1  - Lösungen zu den Übungen (frei zugänglich):  https://www.fh-aachen.de/menschen/weigand/lehrbuch
PB  - Physica-Verlag
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Defining Precisions for Reliable Measurement and Estimation Procedures
JF  - Economic Quality Control. 24 (2009), H. 1
Y1  - 2009
SN  - 0940-5151
SP  - 5
EP  - 33
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Statistical Tests Based on Reliability and Precision
JF  - Economic Quality Control : EQC ; international journal for quality and reliability
N2  - The construction of a statistical test is investigated which is based only on “reliability” and “precision” as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct.  However, the quantification of the precision of a statistical test is not at all evident.  Thereforethe paper presents and discusses several approaches.  Moreover the distinction of “nullhypothesis” and “alternative hypothesis” is not necessary any longer.
Y1  - 2012
U6  - http://dx.doi.org/10.1515/eqc-2012-0002
SN  - 1869-6147
VL  - 27
IS  - 1
SP  - 43
EP  - 64
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Weigand, Christoph
T1  - Statistik mit und ohne Zufall : Eine anwendungsorientierte Einführung
Y1  - 2019
SN  - 978-3-662-59309-7
U6  - http://dx.doi.org/10.1007/978-3-662-59309-7
PB  - Springer Spektrum
CY  - Berlin, Heidelberg
ET  - 3. Aufl.
ER  - 
TY  - JOUR
A1  - Wegner, Lena
A1  - von Arx, Georg
A1  - Sass-Klaassen, Ute G. W.
A1  - Eilmann, Britta
T1  - ROXAS – an efficient and accurate tool to detect vessels in diffuse-porous species
JF  - IAWA Journal / International Association of Wood Anatomists
Y1  - 2013
U6  - http://dx.doi.org/10.1163/22941932-00000034
SN  - 0928-1541 (Print)
SN  - 2294-1932 (Online)
VL  - 34
IS  - 4
SP  - 425
EP  - 432
PB  - Brill
CY  - Leiden
ER  - 
TY  - JOUR
A1  - Wegmann, Kilian
A1  - Hackl, Michael
A1  - Staat, Manfred
A1  - Mayer, Katharina
A1  - Müller, Lars-Peter
T1  - Double plate osteosynthesis of proximal ulna fractures: biomechanical and clinical results
JF  - Knee surgery, sports traumatology, arthroscopy
N2  - While plate fixation of proximal ulna fractures might lead to superior clinical results compared to tension band wiring, regular plates represent an established risk factor for wound complications. The olecranon double plates (Medartis, Basel, CH) might decrease complications related to the osteosynthesis because of their low profile and better anatomical fit. This study aimed to evaluate the biomechanical performance and clinical results of the olecranon double plates.
Y1  - 2016
U6  - http://dx.doi.org/10.1007/s00167-016-4079-0
SN  - 0942-2056
VL  - Volume 24
IS  - Supplement 1
SP  - 58
EP  - 59
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Weemstra, Monique
A1  - Eilmann, Britta
A1  - Sass-Klaassen, Ute G. W.
A1  - Sterck, Frank J.
T1  - Summer droughts limit tree growth across 10 temperate species on a productive forest site
JF  - Forest Ecology and Management
Y1  - 2013
U6  - http://dx.doi.org/doi:10.1016/j.foreco.2013.06.007
SN  - 0378-1127 (Print)
SN  - 1872-7042  (Online)
VL  - 2013
IS  - 306
SP  - 142
EP  - 149
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wedrowski, M.
A1  - Bruyndonckx, P.
A1  - Tavernier, S.
A1  - Zhi, L.
A1  - Dang, J.
A1  - Mendes, P. R.
A1  - Perez, J. M.
A1  - Ziemons, Karl
T1  - Robustness of neural networks algorithm for gamma detection in monolithic block detector, positron emission tomography
JF  - 2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - The monolithic scintillator block approach for gamma detection in the Positron Emission Tomography (PET) avoids estimating Depth of Interaction (DOI), reduces dead zones in detector and diminishes costs of detector production. Neural Networks (NN) are very efficient to determine the entrance point of a gamma incident on a scintillator block. This paper presents results on the robustness of the spatial resolution as a function of the random fraction in the data, temperature and HV fluctuations. This is important when implementing the method in a real scanner. Measurements were done with two Hamamatsu S8550 APD arrays, glued on a 20 × 20 × 10 mm3 monolithic LSO crystal block.
Y1  - 2009
SN  - 1082-3654
SP  - 2625
EP  - 2628
ER  - 
TY  - JOUR
A1  - Weckesser, Matthias
A1  - Hufnagel, Andreas
A1  - Ziemons, Karl
A1  - Grießmeier, Martin
A1  - Sonnenberg, Frank
A1  - Hackländer, Thomas
A1  - Langen, Karl-J.
A1  - Holschbach, Markus
A1  - Elger, Christian E.
A1  - Müller-Gärtner, Hans-W.
T1  - Effect of partial volume correction on muscarinic cholinergic receptor imaging with single-photon emission tomography in patients with temporal lobe epilepsy
JF  - European Journal of Nuclear Medicine
N2  - Animal experiments and preliminary results in humans have indicated alterations of hippocampal muscarinic acetylcholine receptors (mAChR) in temporal lobe epilepsy. Patients with temporal lobe epilepsy often present with a reduction in hippocampal volume. The aim of this study was to investigate the influence of hippocampal atrophy on the quantification of mAChR with single photon emission tomography (SPET) in patients with temporal lobe epilepsy. Cerebral uptake of the muscarinic cholinergic antagonist [123I]4-iododexetimide (IDex) was investigated by SPET in patients suffering from temporal lobe epilepsy of unilateral (n=6) or predominantly unilateral (n=1) onset. Regions of interest were drawn on co-registered magnetic resonance images. Hippocampal volume was determined in these regions and was used to correct the SPET results for partial volume effects. A ratio of hippocampal IDex binding on the affected side to that on the unaffected side was used to detect changes in muscarinic cholinergic receptor density. Before partial volume correction a decrease in hippocampal IDex binding on the focus side was found in each patient. After partial volume no convincing differences remained. Our results indicate that the reduction in hippocampal IDex binding in patients with epilepsy is due to a decrease in hippocampal volume rather than to a decrease in receptor concentration.
Y1  - 1997
SN  - 1619-7089
VL  - 24
IS  - 9
SP  - 1156
EP  - 1161
ER  - 
TY  - JOUR
A1  - Weckesser, Martin
A1  - Grießmeier, Martin
A1  - Schmidt, Daniela
A1  - Sonnenberg, Frank
A1  - Ziemons, Karl
A1  - Kemna, Lars
A1  - Holschbach, Marcus
A1  - Langen, Karl-J.
A1  - Müller-Gärtner, Hans-W.
T1  - Iodine-123 α-methyl tyrosine single-photon emission tomography of cerebral gliomas: standardised evaluation of tumour uptake and extent
JF  - European Journal of Nuclear Medicine
N2  - Single-photon emission tomography (SPET) with the amino acid analogue l-3-[123I]iodo-α-methyl tyrosine (IMT) is helpful in the diagnosis and monitoring of cerebral gliomas. Radiolabelled amino acids seem to reflect tumour infiltration more specifically than conventional methods like magnetic resonance imaging and computed tomography. Automatic tumour delineation based on maximal tumour uptake may cause an overestimation of mean tumour uptake and an underestimation of tumour extension in tumours with circumscribed peaks. The aim of this study was to develop a program for tumour delineation and calculation of mean tumour uptake which takes into account the mean background activity and is thus optimised to the problem of tumour definition in IMT SPET. Using the frequency distribution of pixel intensities of the tomograms a program was developed which automatically detects a reference brain region and draws an isocontour region around the tumour taking into account mean brain radioactivity. Tumour area and tumour/brain ratios were calculated. A three-compartment phantom was simulated to test the program. The program was applied to IMT SPET studies of 20 patients with cerebral gliomas and was compared to the results of manual analysis by three different investigators. Activity ratios and chamber extension of the phantom were correctly calculated by the automatic analysis. A method based on image maxima alone failed to determine chamber extension correctly. Manual region of interest analysis in patient studies resulted in a mean inter-observer standard deviation of 8.7%±6.1% (range 2.7%–25.0%). The mean value of the results of the manual analysis showed a significant correlation to the results of the automatic analysis (r = 0.91, P<0.0001 for the uptake ratio; r = 0.87, P<0.0001 for the tumour area). We conclude that the algorithm proposed simplifies the calculation of uptake ratios and may be used for observer-independent evaluation of IMT SPET studies. Three-dimensional tumour recognition and transfer to co-registered morphological images based on this program may be useful for the planning of surgical and radiation treatment.
Y1  - 1998
SN  - 1619-7089
VL  - 25
IS  - 2
SP  - 150
EP  - 156
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Ruff-Stahl, Hans-Joachim K.
T1  - Advances in Composite Manufacturing of Helicopter Parts
JF  - International Journal of Aviation, Aeronautics, and Aerospace
Y1  - 2017
U6  - http://dx.doi.org/10.15394/ijaaa.2017.1153
SN  - 2374-6793
VL  - 4
IS  - 1
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Arent, Jan-Christoph
A1  - Hausmann, Joachim
T1  - An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates
JF  - Journal of Composite Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1177/0021998319846556
SN  - 1530-793X
VL  - 53
IS  - 26-27
SP  - 3757
EP  - 3773
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
A1  - Steffen, Lucas
A1  - Balvers, Johannes M.
A1  - Duhovic, Miro
T1  - Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation
JF  - Journal of Composite Materials
Y1  - 2017
U6  - http://dx.doi.org/10.1177/0021998317699868
SN  - 1530-793X
VL  - 51
IS  - 12
SP  - 1753
EP  - 1767
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
A1  - Münch, Lukas
A1  - Duhovic, Miro
A1  - Balvers, Johannes M.
T1  - A fast method for the generation of boundary conditions for thermal autoclave simulation
JF  - Composites Part A
N2  - Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.compositesa.2016.05.036
SN  - 1359-835X
VL  - 88
SP  - 216
EP  - 225
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Weber, Tobias
T1  - Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts
T2  - Proceedings of SAMPE Europe Conference 2015, Amiens, France
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - THES
A1  - Weber, Tobias
T1  - Herstellprozesssimulation zur Vorhersage der Faltenbildung in der Prepreg-Autoklav-Fertigung
Y1  - 2019
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:386-kluedo-54923
SN  - 978-3-944440-24-8
N1  - Dissertation, Kaiserslautern, Technische Universität Kaiserslautern, 2017
PB  - Technische Universität Kaiserslautern
CY  - Kaiserslautern
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Halling, H.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H.-W.
T1  - The design of an animal PET: flexible geometry for achieving optimal spatial resolution or high sensitivity
T2  - Conference record / 1995 IEEE Nuclear Science Symposium and Medical Imaging, October 21 - 28, 1995, San Francisco ; vol. 2
Y1  - 1995
SN  - 078033180X ; 0780331818 ; 0780331826
SP  - 1002
EP  - 1005
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Engels, R.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - The KFA TierPET: performance characteristics and measurements
T2  - Conference record / 1996 IEEE Nuclear Science Symposium [and Medical Imaging], November 2 - 9, 1996, Anaheim, California ; vol. 2
Y1  - 1996
SN  - 0-7803-3534-1
SN  - 1082-3654
SP  - 1117
EP  - 1119
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Weber, Pascale
A1  - Rigling, Andreas
A1  - Eilmann, Britta
A1  - Mayer, Phillip
A1  - Wohlgemuth, Thomas
A1  - Dobbertin, Matthias
T1  - Verjüngung und Konkurrenz der Flaumeiche im Wallis
JF  - Informationsblatt Wald
Y1  - 2008
SN  - 1661-5859 (Online)
SN  - 1424-5701 (Print)
SN  - 1661-5832 (Print)
IS  - 22
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - THES
A1  - Weber, Jana
T1  - Botanischer Garten und Botanisches Museum Berlin: Entwicklung eines neuen Erscheinungsbildes
N2  - Die Pflanzenvielfalt der Erde steht im Fokus aller Aktivitäten am Botanischen Garten und Botanischen Museum Berlin (BGBM). Umfangreiche wissenschaftliche Sammlungen bilden zusammen mit den historischen Garten- und Gewächshausanlagen, dem Museum und einer modernen Forschungsinfrastruktur die Grundlage für die dortige Arbeit. Darüber hinaus trägt das BGBM mit seinen Forschungs- und Entwicklungsprojekten zu nationalen und internationalen Biodiversitätsprogrammen bei. Umso wichtiger ist es, der Einrichtung ein klares und modernes Auftreten zu geben. Das neue Erscheinungsbild lässt Garten und Museum durch eine rahmende Typografie zu einer Einheit werden und kommuniziert so auch gleichzeitig das Leitbild der Einrichtung, als „Schaufenster in die Pflanzenwelt“ zu dienen. Es positioniert das BGBM zum einen als wissenschaftliche Institution und zum anderen als farbenfrohes Ausflugsziel und Erholungsort.
KW  - Gestaltung
KW  - Botanik
KW  - Pflanzenwelt
KW  - Botanischer Garten
KW  - Umwelt
Y1  - 2021
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Weber, Ingo
A1  - Markovic, Ivan
A1  - Drumm, Christian
T1  - A conceptual framework for composition in business process management
T2  - Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings
Y1  - 2007
SN  - 978-3-540-72035-5
U6  - http://dx.doi.org/10.1007/978-3-540-72035-5_5
SP  - 54
EP  - 66
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Schulte, A.
A1  - Lauterbach, Gerhard
A1  - Südkamp, Michael [u.a.]
T1  - Studienüberblick zu transienten Druckexkursionen bei Membranoxygenatoren / A. Schulte, G. Lauterbach, M. Südkamp, H.-J. Weber
JF  - Kardiotechnik. 8 (1999), H. 1
Y1  - 1999
SN  - 0941-2670
SP  - 14
EP  - 16
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Schmitt, W.
A1  - Jahn, D.
A1  - Euringer, H.
T1  - Ein Versuch zur theoretischen Temperaturermittlung im Schneidbereich bei Bohrungen in kortikalem Knochen - An Experiment to Calculate the Theoretical Temperature at the Drill - Cortical Bone Interface / Schmitt, W. ; Weber, H. J. ; Jahn, D. ; Euringer, H.
JF  - Biomedizinische Technik/Biomedical Engineering. 34 (1989), H. 3
Y1  - 1989
SN  - 0013-5585
N1  - in der Bereichsbibliothek Jülich gedruckt vorhanden
SP  - 53
EP  - 56
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Schmitt, W.
A1  - Jahn, D.
T1  - Thermische Untersuchungen beim Bohren in kortikalem Knochen unter Verwendung verschiedener Kühlsysteme / Schmitt, W. ; Weber, H. J. ; Jahn, D.
JF  - Deutsche zahnärztliche Zeitschrift : DZZ. 43 (1988), H. 7
Y1  - 1988
SN  - 0012-1029
SP  - 802
EP  - 805
ER  - 
TY  - CHAP
A1  - Weber, Hans-Joachim
A1  - Porschen, W.
A1  - Dietzel, F.
A1  - [u.a.], 
ED  - Streffer, Christian
T1  - In vivo analysis of the influence of combined hyperthermia and gamma irradiation on euoxic and hypoxic tumor cells
T2  - Cancer therapy by hyperthermia and radiation : [proceedings of the 2. International Symposium on Cancer Therapy by Hyperthermia and Radiation, Essen, 2.-4.6.1977]
Y1  - 1978
SN  - 0-8067-1701-7
SN  - 3-541-71701-7
SP  - 276
EP  - 277
PB  - Urban and Schwarzenberg
CY  - Baltimore ; Munich [u.a.]
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Mo, Xiumei
A1  - Ramakrishna, S.
T1  - PCL-PGLA composite tubular scaffold preparation and biocompatibility investigation / X. Mo, H.-J. Weber, S. Ramakrishna
JF  - The International journal of artificial organs. 29 (2006), H. 8
Y1  - 2006
SP  - 790
EP  - 799
PB  - -
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Mo, Xiumei
A1  - Chen, Zonggang
T1  - Electrospun nanofibers of collagen-chitosan and P(LLA-CL) for tissue engineering / Mo Xiumei, Chen Zonggang, Hans J. Weber
JF  - Frontiers of materials science in China. 1 (2007), H. 1
Y1  - 2007
SN  - 1673-7377
SP  - 20
EP  - 23
PB  - -
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Mo, Xiumei
T1  - Electrospinning P(LLA-CL) nanofiber: a tubular scaffold fabrication with circumferential alignment / Xiumei Mo, Hans-Joachim Weber
JF  - Contributions from 6th Austrian Polymer Meeting : Vienna, Austria, September 15 - 17, 2003 / Symposium ed.: W. H. Binder
Y1  - 2004
N1  - Österreichische Polymertage <6, 2003, Wien>. - (Macromolecular symposia ; 217,1)
SP  - 413
EP  - 416
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Laco, Filip
A1  - Kun, Ma
A1  - Ramakrishna, S.
T1  - The dose effect of human bone marrow-derived mesenchymal stem cells on epidermal development in organotypic co-culture / Laco, Filip ; Kun, Ma ; Weber, Hans Joachim ; Ramakrishna, S. ; Chan, Casey K.
JF  - Journal of Dermatological Science. 55 (2009), H. 3
Y1  - 2009
SN  - 0923-1811
SP  - 150
EP  - 160
ER  - 
TY  - BOOK
A1  - Weber, Hans-Joachim
A1  - Kaminsky, Radoslav
A1  - Kallweit, Stephan
A1  - Simons, Antoine
T1  - PIV measurements with high temporal resolution behind artificial heart valves
Y1  - 2005
N1  - International Symposium on Particle Image Velocimetry <6, 2005, Pasadena, Calif.>
ER  -