TY  - JOUR
A1  - Tüg, Helmut
A1  - Baumann, Marcus
T1  - Reply to the comments by R.L. McKenzie and P.V. Johnston on our paper “Problems of UV-B radiation measurements in biological research: Critical Remarks on current techniques and suggestions for improvements”
JF  - Geophysical research letters
Y1  - 1995
SN  - 1944-8007 (E-Journal); 0094-8276 (Print)
VL  - Vol. 22
IS  - Iss. 9
SP  - 1159
EP  - 1160
ER  - 
TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - JOUR
A1  - Turlybekuly, Amanzhol
A1  - Pogrebnjak, Alexander
A1  - Sukhodub, L. F.
A1  - Sukhodub, Liudmyla B.
A1  - Kistaubayeva, A. S.
A1  - Savitskaya, Irina
A1  - Shokatayeva, D. H.
A1  - Bondar, Oleksandr V.
A1  - Shaimardanov, Z. K.
A1  - Plotnikov, Sergey V.
A1  - Shaimardanova, B. H.
A1  - Digel, Ilya
T1  - Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix
JF  - Materials Science and Engineering C
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.msec.2019.109965
VL  - 104
IS  - Article number 109965
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Turek, Monika
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
T1  - Herstellung und Charakterisierung eines hybriden Sensorarrays auf Halbleiterbasis für die Umweltanalytik
JF  - Sensoren und Messsysteme 2008 : 14. Fachtagung Ludwigsburg, 11. und 12. März 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2008
SN  - 978-3-18-092011-5
N1  - VDI-Berichte ; 2011 ; Sensoren und Messsysteme 2008, 14. GMA/ITG-Fachtagung, VDI/VDE- Gesellschaft Mess- und Automatisierungstechnik, + CD-ROM, Ludwigsburg, DE, 11.-12. Mar, 2008
SP  - 803
EP  - 810
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Turek, Monika
A1  - Ketterer, Lothar
A1  - Claßen, Melanie
A1  - Berndt, Heinz
A1  - Elbers, Gereon
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development and Electrochemical Investigations of an EIS-(Electrolyte-Insulator-Semiconductor) based Biosensor for Cyanide Detection
JF  - Sensors
Y1  - 2007
SN  - 1424-8220
VL  - 7
IS  - 8
SP  - 1415
EP  - 1426
ER  - 
TY  - JOUR
A1  - Turek, Monik
A1  - Heiden, Wolfgang
A1  - Guo, Sharon
A1  - Riesen, Alfred
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 817
EP  - 823
ER  - 
TY  - JOUR
A1  - Turek, M.
A1  - Keusgen, M.
A1  - Poghossian, Arshak
A1  - Mulchandani, A.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - Enzyme-modified electrolyte-insulator-semiconductor sensors
JF  - Journal of Contemporary Physics. 43 (2008), H. 2
Y1  - 2008
SN  - 1934-9378
N1  - Armenian Academy of Sciences
SP  - 82
EP  - 85
ER  - 
TY  - JOUR
A1  - Turdumamatov, Samat
A1  - Belda, Aljoscha
A1  - Heuermann, Holger
T1  - Shaping a decoupled atmospheric pressure microwave plasma with antenna structures, Maxwell’s equations, and boundary conditions
JF  - IEEE Transactions on Plasma Science
N2  - This article addresses the need for an innovative technique in plasma shaping, utilizing antenna structures, Maxwell’s laws, and boundary conditions within a shielded environment. The motivation lies in exploring a novel approach to efficiently generate high-energy density plasma with potential applications across various fields. Implemented in an E01 circular cavity resonator, the proposed method involves the use of an impedance and field matching device with a coaxial connector and a specially optimized monopole antenna. This setup feeds a low-loss cavity resonator, resulting in a high-energy density air plasma with a surface temperature exceeding 3500 o C, achieved with a minimal power input of 80 W. The argon plasma, resembling the shape of a simple monopole antenna with modeled complex dielectric values, offers a more energy-efficient alternative compared to traditional, power-intensive plasma shaping methods. Simulations using a commercial electromagnetic (EM) solver validate the design’s effectiveness, while experimental validation underscores the method’s feasibility and practical implementation. Analyzing various parameters in an argon atmosphere, including hot S -parameters and plasma beam images, the results demonstrate the successful application of this technique, suggesting its potential in coating, furnace technology, fusion, and spectroscopy applications.
KW  - 3-D printing
KW  - Furnace
KW  - Fusion
KW  - Hot S-parameter
KW  - Mode converter
Y1  - 2024
U6  - http://dx.doi.org/10.1109/TPS.2024.3383589
SN  - 0093-3813 (Print)
SN  - 1939-9375 (Online)
IS  - Early Access
SP  - 1
EP  - 9
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Turck, Christoph W.
A1  - Berndt, Heinz
T1  - Synthese definierter Peptid-Derivate durch Aminolyse von 3-(Nα-Acyl-peptidyloxy)-2-hydroxy-N-alkylbenzamiden bei erhöhten Temperaturen, I : Synthese des Modellpeptid-Derivates Z-Ala-Phe-Gly-N(Et)2
JF  - Hoppe-Seyler´s Zeitschrift für physiologische Chemie
Y1  - 1981
U6  - http://dx.doi.org/10.1515/bchm2.1981.362.1.821
SN  - 1437-4315
SN  - 0018-4888
VL  - 362
IS  - 1
SP  - 821
EP  - 828
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Saparbekova, A.
A1  - Akynova, L.
A1  - Abildayeva, R.
A1  - Sadenova, M.
A1  - Sartayeva, K.
A1  - Schieffer, Andre
A1  - Digel, Ilya
T1  - Species composition and injuriousness of stranger xylophilous fauna affecting indigenous urban dendroflora of Central Asia
JF  - Asian journal of microbiology, biotechnology & environmental sciences : AJMBES
N2  - At the present time, one of the most serious environmental problems of Central Asia and South Kazakhstan is the ongoing large-scale deterioration of principal urban tree populations. Several major centers of massive spread of invasive plant pests have been found in urban dendroflora of this region. The degree of damage of seven most wide-spread aboriginal tree species was found to range from 21.4±1.1 to 85.4±1.8%. In particular, the integrity of the native communities of sycamore (Platanus spp.), willow (Salix spp.), poplar (Populus spp.) and elm (Ulmus spp.) is highly endangered. Our taxonomic analysis of the most dangerous tree pests of the region has revealed them as neobiontic xylophilous insects such as Cossus cossus L. (Order: Lepidoptera L.) Monochamus urussovi Fisch., Monochamus sutor L., Acanthocinus aedelis L. and Ñetonia aureate L. (Order: Coleoptera L.). We relate the origin of this threatening trend with the import of industrial wood in the mid 90’s of the last century that was associated with high degree of the constructional work in the region. Because of the absence of efficient natural predators of the pest species, the application of microbiological methods of the pest control and limitation is suggested.
Y1  - 2016
SN  - 0972-3005
VL  - 18
IS  - 2
SP  - 359
EP  - 366
PB  - EM International
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Digel, Ilya
A1  - Elibayeva, G.
A1  - Sydykova, A.
A1  - Uspabayeva, A.
A1  - Dosybayeva, G.
A1  - Zhylysbayeva, A.
A1  - Lakhanova, K.
T1  - Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L
JF  - Life science journal
N2  - The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium – F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 % respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.
Y1  - 2014
U6  - http://dx.doi.org/10.7537/marslsj1105s14.33
SN  - 1097-8135
VL  - 11
IS  - Spec. iss. 5s
SP  - 171
EP  - 175
PB  - Marsland Press
CY  - New York
ER  - 
TY  - CHAP
A1  - Tullis, Blake P.
A1  - Crookston, Brian M.
A1  - Bung, Daniel B.
T1  - Weir head-discharge relationships: A multi-lab exercise
T2  - E-proceedings of the 38th IAHR World Congress  September 1-6, 2019, Panama City, Panama
Y1  - 2019
SP  - 1
EP  - 15
ER  - 
TY  - THES
A1  - Tschiersch, Lina Sofie
T1  - Cooking for wellbeing : Küchensystem für Menschen mit Alzheimer-Demenz
N2  - Essen zuzubereiten bedeutet für viele Menschen Normalität, es bestimmt Teile ihrer Identität und ist eng verbunden mit Familie und Kultur. Der Beginn der Alzheimererkrankung erschwert diese Tätigkeit, oft muss sie aus Sicherheitsgründen aufgegeben werden. Kochen als Therapieansatz hat zur Verbesserung der Aktivität und Verringerung von Stress beigetragen. Pila ist ein Küchensystem, das Kochenthusiasten begleitet und Selbstständigkeit sowie Partizipation ermöglicht. Das Kompetenzgefühl, die Autonomie und die Verbundenheit zu betreuenden Personen stärken das Wohlbefinden. Das System führt die Nutzerinnen und Nutzer digital durch alle Phasen von der Vorbereitung bis zum Aufräumen. Aus den Elementen entsteht ein klar organisierter Arbeitsplatz ohne Ablenkungen und mit eindeutigen Aktionspunkten. Die Funktionen der Kocheinheit sind simplifiziert und bedürfnisgerecht angepasst.
KW  - Industriedesign
KW  - Küche
KW  - Inklusiv
KW  - Kochen
KW  - Haushaltsgerät
Y1  - 2023
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Trümpener, Nora
A1  - Peters, Jan
A1  - Herzel, Manuel
A1  - Vollmann, Alina
A1  - Breuer, Gina
ED  - Kroll-Ludwigs, Kathrin
ED  - Bassen-Metz, Yasmine
ED  - Eggert, Mathias
ED  - Fritz, Thomas
ED  - Höhne, Tim
ED  - Tran, Duc Hung
ED  - Vogt, Jürgen
T1  - Aachener Online-Schriften Wirtschaft und Recht. Band 3/2021
N2  - Inhaltsverzeichnis
1. Die ordentliche Kündigung chronisch Kranker im Anwendungsbereich des
KSchG
– Nora Trümpener 3-56
2. Die Legitimationswirkung der Gesellschafterliste -
Erfolg trotz Grenzen?
– Jan Peters 57-112
3. Marktmanipulation – Arten, Abgrenzung und gesetzliche Handhabe
– Manuel Herzel 113-170
4. Die Zulässigkeit der Verdachtskündigung im Arbeitsverhältnis
– Alina Vollmann 171-248
5. Praxisorientierter Arbeitgeberleitfaden zur rechtssicheren Einführung von
Homeoffice im Arbeitsverhältnis
– Gina Breuer 249-304
T3  - Aachener Online-Schriften Wirtschaft und Recht - 3 
Y1  - 2021
PB  - FH Aachen / Fachbereich Wirtschaftswissenschaften
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Trzewik, Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Linder, Peter
A1  - Demirci, T.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Evaluation of lateral mechanical tension in thin-film tissue constructs
JF  - Annals of Biomedical Engineering. 32 (2004), H. 9
Y1  - 2004
SN  - 1573-9686
SP  - 1243
EP  - 1251
ER  - 
TY  - THES
A1  - Trzewik, Jürgen
T1  - Experimental analysis of biaxial mechanical tension in cell monolayers and cultured three-dimensional tissues: the celldrum technology
Y1  - 2007
N1  - Zugl.: Ilmenau, Techn. Univ., Diss., 2007
PB  - Univeristätsverlg Ilmenau
CY  - Ilmenau
ER  - 
TY  - JOUR
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Spielvogel, A.
A1  - Platt, Werner
T1  - Expertensystem wählt und dimensioniert drehelastische Kupplungen
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1986
SN  - 0040-1498
SN  - 1662-3096
SN  - 0040-148X
SN  - 1023-0823
VL  - 78
IS  - 1
SP  - 92
EP  - 95
PB  - Binkert Medien
CY  - Laufenburg
ER  - 
TY  - PAT
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Altherr, Marcel
A1  - Schiessl, Helmut F.
T1  - Topfspinnvorrichtung : [Offenlegungsschrift]
T1  - Pot spinning device : [Patentschrift]
N2  - "The invention relates to a pot spinning device (1) comprising a thread guide (9) which can be moved backwards and forwards and introduced into an opening (8) on the end side of the pot (7) so as to deposit a thread on the inside wall of a spinning pot. In order to improve upon pot spinning devices of this kind, the spinning pot is connected to an electric drive mechanism (10), mounted in magnetic bearings and provided with a gastight housing. Said housing encompasses the spinning pot (7), is open in the area where there is an opening in the end side of the pot and is provided with a seal (19) to seal off the intermediate area (17) between the housing and spinning pot. The housing is also connected to a supply of light-gas via a feed line (18), thereby enabling a light-gas atmosphere to be maintained in the intermediate area."
Y1  - 1999
N1  - Außerdem veröffentlicht als: DE19815546(C2), CA2334866(A1), AU3704699(A) und AR019018(A1)
PB  - Deutsches Patent- und Markenamt ; Weltorganisation für Geistiges Eigentum
CY  - München ; Genf
ER  - 
TY  - THES
A1  - Trinidad Avila, Maria Alejandra
T1  - Work Habitat : Modular-skalierbare Office Markenstrategie für rasant wachsende Startups
N2  - „Work Habitat“ ist eine markenorientierte Officelösung, die auf skalierbare Weise mit einem Start-up mitwächst und in Kooperation mit dem Unternehmen academa GmbH entstanden ist. Diese Brand Experience fördert Teambuilding und Identifikation mit dem Unternehmen. Sie passt sich an die Teammitglieder an, indem sie einen ganzheitlichen Blick auf das Office-System bewahrt. Ferner stellt sie eine nahtlose Verbindung digitaler und analoger Arbeitswelten dar und bietet eine einladende Umgebung verschiedener Arten zu Arbeiten an: von Deep-Focus bis zur kooperativen Zusammenarbeit und der Anregung zwangloser Begegnungen. Die modularen Komponenten können trotz Veränderungen, Umzügen oder unerwartet rasanten Entwicklungen nachhaltig und flexibel eingesetzt werden. Eine schnelllebige Welt erfordert eine angebrachte, sich ihr anpassende New-Work-Umgebung.
KW  - office design
KW  - spatial design
KW  - interior design
KW  - New York
KW  - Markenstrategie
Y1  - 2022
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Trilla, Joan
A1  - Grossen, Jürgen
A1  - Robinson, Alexander
A1  - Funke, Harald
A1  - Bosschaerts, Walter
A1  - Hendrick, Patrick
T1  - Development of a hydrogen combustion chamber for an ultra micro gas turbine
JF  - PowerMEMS 2008, 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, microEMS 2008, 2nd Symposium on Micro Environmental Machine Systems, Sendai, JP, Nov 9-12, 2008
Y1  - 2008
SP  - 101
EP  - 104
ER  - 
TY  - THES
A1  - Treutlein, Antonia
T1  - Entwicklung eines Erscheinungsbildes für die Meeresschutzorganisation Ocean Care
N2  - Ocean Care ist eine politisch unabhängige Non-Profit-Organisation mit Sitz in der Schweiz. Sie setzt sich seit 1989 für den Schutz von Meeressäugern und deren Lebensraum ein. Seit 2011 ist Ocean Care außerdem UN-Sonderberaterin für Fragen im Meeresschutz. Da Ocean Care die Öffentlichkeit für das Thema Meeresschutz sensibilisieren möchte und ihre Arbeit durch Spenden finanziert wird, ist ein professionelles, vertrauenerweckendes Erscheinungsbild unerlässlich. Durch ein zeitgemäßes und seriöses Design, welches sich von anderen Organisationen abhebt, kann die Zielgruppe erweitert und die Bedeutsamkeit der Arbeit hervorgehoben werden. Das neue Erscheinungsbild beruht auf der Idee, dass sich die Informationen unter der Meeresoberfläche befinden. Die Linie, die den Meeresspiegel visualisiert, dient außerdem medienübergreifend als Orientierungshilfe.
KW  - Erscheinungsbild
KW  - Gestaltung
KW  - Corporate Design
KW  - Layout
KW  - Redesign
Y1  - 2022
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - THES
A1  - Trautmann, Christina
T1  - Dirty Air
N2  - Die Formel 1 ist ein Extremsport und soll wie viele andere Wettbewerbe in diesem Bereich unterhalten. Die Konkurrenz unter den Fahrern ist jederzeit präsent, jedoch das dadurch steigende Gefahrenpotenzial nicht. In der Graphic Novel „Dirty Air“ wir auf Basis eines dokumentarisch-informativen Ansatzes aufgezeigt, inwiefern die Rivalität zweier Fahrer Auswirkungen auf die Sicherheit des Sports haben kann. Es wird über die wichtigsten Ereignisse der Saison 2021 erzählt, die beispielhaft dafür stehen, wie sich der Wettbewerb zuspitzen kann. Die Geschehnisse sind realen Gegebenheiten nachempfunden und illustrativ umgesetzt. Ziel der Arbeit ist es, die Leser*innen zum Nachdenken anzuregen und Verständnis zu schaffen. Rivalitäten sind wichtig und notwendig im Sport, sollten jedoch kein Anker für Hass und unüberlegte Risiken sein, egal ob innerhalb des Fahrerlagers oder der Fangemeinschaft.
KW  - Illustration
KW  - Formel 1
KW  - Konkurrenz
KW  - Graphic Novel
KW  - Rivalität
Y1  - 2023
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - THES
A1  - Traut, Eva Melina
T1  - Vom Öko-Dino zur Lifestyle-Marke : Rebranding für die Bio-Lebensmittelmarke Alnatura
N2  - Das Thema „Bio“ ist auf dem Markt längst zu einem Mainstream geworden und vor allem bei jüngeren Zielgruppen sehr gefragt. Umso wichtiger ist es für Bio-Marken wie ALNATURA, sich zu definieren, um neben innovativen, nachhaltigen Start-up-Marken noch aufzufallen. Aktuell ist ALNATURA vorwiegend aufgrund der hochwertigen Produkte sowie einer transparenten Kommunikation bekannt. Jedoch fehlt es den Produkten an einheitlichem Design mit Wiedererkennungswert. Diese Arbeit zeigt einen Ansatz für ein neues, zeitgemäßes Gestaltungskonzept. Im Zuge dessen wurde das Unternehmenslogo modifiziert sowie Farben, Schrift und Gestaltungsraster neu definiert. Um das neue Image der Marke bekannt zu machen, wurde zudem eine Plakatkampagne entwickelt. Das Projekt zeigt, wie sich eine Bio-Marke weg vom Öko-Image und hin zu einer modernen Lifestyle-Marke mit Relevanz entwickeln kann.
KW  - Bio-Lebensmittelmarke
KW  - Alnatura
KW  - Transparenz
KW  - Corporate Design
KW  - Packaging Design
Y1  - 2022
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Traud, S.
A1  - Gottschling, C.
A1  - Haas, J.
A1  - Gatzweiler, Karl-Heinz
A1  - Weber, Hans-Joachim
T1  - Internet-Server für die Kardiotechnik an der Fachhochschule Aachen/Jülich
JF  - Kardiotechnik. 4 (1996), H. 3
Y1  - 1996
SN  - 0941-2670
SP  - 82
EP  - 85
ER  - 
TY  - JOUR
A1  - Trapp, Svenja
A1  - Lammers, Tom
A1  - Engudar, Gokce
A1  - Hoehr, Cornelia
A1  - Denkova, Antonia G.
A1  - Paulßen, Elisabeth
A1  - de Kruijff, Robin M.
T1  - Membrane-based microfluidic solvent extraction of Ga-68 from aqueous Zn solutions: towards an automated cyclotron production loop
JF  - EJNMMI Radiopharmacy and Chemistry
KW  - Microfluidic solvent extraction
KW  - Ga-68
KW  - Cyclotron production
KW  - Medical radionuclide production
KW  - Metal contaminants
Y1  - 2023
U6  - http://dx.doi.org/10.1186/s41181-023-00195-2
SN  - 2365-421X
VL  - 2023
IS  - 8, Article number: 9
SP  - 1
EP  - 14
PB  - Springer Nature
ER  - 
TY  - THES
A1  - Transfeld, Janine
T1  - Ein Kl-gestütztes Software-Tool : zur Unterstützung der Projektgestaltung der BMW AG
N2  - Die Bachelorarbeit beschäftigte sich mit der Integration von künstlicher Intelligenz (KI) in softwarebasierte Lösungen und hatte das Ziel, ein prototypisches Lösungsmodell zu entwickeln. Dabei wurde das User-Experience-Designverfahren angewendet, um eine neue innovative Arbeitsweise zu schaffen, die KI-gestützte Produktentwicklungsprozesse umfasst.
KW  - Kooperation
KW  - FH Aachen
KW  - BMW
KW  - Künstliche Intelligenz
KW  - Neue Arbeitsweise
Y1  - 2023
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - THES
A1  - Tran, Thuy Tien
T1  - Shaping the Future of E-Government: Design System zur Implementierung digitaler öffentlicher Services
N2  - Der digitale Transformationsprozess ist einer der größten gesellschaftlichen Umbrüche in der Geschichte der Menschheit. Aufgrund der Corona-Pandemie stieg die Nutzung von digitalen Kanälen bei den Bürger:innen wie nie zuvor und führt zu einem sprunghaften Anstieg der Nachfrage nach öffentlichen Services in digitaler Form.
Das Ziel dieser Bachelorarbeit ist es, einen digitalen Raum zu gestalten, der den analogen Weg zum Amt größtenteils erspart. Mit geeigneten Kommunikationskanälen kann auf die Bedürfnisse unterschiedlicher Gruppen eingegangen werden. Die Entwicklung der Anwendung IDport bietet sowohl private als auch staatliche Einsparpotenziale. Bürokratische Aufwände sollen durch eine neue Art des E-Government beseitigt werden. Die Konzeption ist infolge der aktuellen Gegebenheit in Deutschland weit entfernt von einer realitätsnahen Umsetzung, weshalb es sich bei der Anwendung um eine revolutionäre Zukunftsvision handelt.
KW  - E-Government
KW  - Design System
KW  - Revolution
KW  - Zukunftsvision
KW  - Optimierung
Y1  - 2021
N1  - Für diese Arbeit steht kein Volltext zur Verfügung.
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties
JF  - Limit State of Materials and Structures : Direct Methods 2. Saxcé, Géry de (Hrsg.)
Y1  - 2013
SN  - 978-94-007-5424-9
SP  - 89
EP  - 102
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method
T2  - Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.
N2  - This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.
Y1  - 2014
SN  - 978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)
U6  - http://dx.doi.org/10.1007/978-94-007-6827-7_5
SP  - 101
EP  - 117
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Uncertainty multimode failure and shakedown analysis of shells
T2  - Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...
N2  - This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.
KW  - Limit analysis
KW  - Shakedown analysis
KW  - Reliability analysis
KW  - Multimode failure
KW  - Non-linear optimization
Y1  - 2015
SN  - 978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)
U6  - http://dx.doi.org/10.1007/978-3-319-12928-0_14
SP  - 279
EP  - 298
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Vu, D. K.
A1  - Staat, Manfred
T1  - Reliability Analysis of Inelastic Shell Structures Under Variable Loads
JF  - Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter
Y1  - 2009
SN  - 978-1-4020-9633-4
SP  - 135
EP  - 156
PB  - Springer Netherland
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - Reliability analysis of shells based on direct plasticity methods
N2  - Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis
N2  - Abstracts of the Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30th - July, 4th 2008, Venice, Italy. 2 pages with abstracts of the authors, Ill. and references.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
KW  - First-order reliability method
KW  - second-order reliability method
KW  - Sensitivity
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Novacek, V.
A1  - Tolba, R.
A1  - Klinge, U.
A1  - Turquier, F.
A1  - Staat, Manfred
T1  - Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011
N2  - Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.
KW  - Anastomose
KW  - Finite-Elemente-Methode
KW  - Biomechanik
KW  - Anastomosis
KW  - Finite element method
KW  - Biomechanics
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Kreißig, R.
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
T1  - Upper bound limit and shakedown analysis of shells using the exact Ilyushin yield surface
JF  - Computer & Structures. 86 (2008)
Y1  - 2008
SN  - 0045-7949
SP  - 1683
EP  - 1695
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Kreißig, R.
A1  - Staat, Manfred
T1  - Probabilistic limit and shakedown analysis of thin plates and shells
JF  - Structural safety. 31 (2009), H. 1
Y1  - 2009
SN  - 0167-4730
SP  - 1
EP  - 18
PB  - -
ER  - 
TY  - THES
A1  - Tran, Thanh Ngoc
T1  - Limit and shakedown analysis of plates and shells including uncertainties
Y1  - 2008
N1  - Chemnitz, Techn. Univ., Diss., 2008
ER  - 
TY  - JOUR
A1  - Tran, Quang Hon
A1  - Bongaerts, Johannes
A1  - Vlad, Dorina
A1  - Unden, Gottfried
T1  - Requirement for the proton-pumping NADH dehydrogenase I of Escherichia coli in respiration of NADH to fumarate and its bioenergetic implications
JF  - European journal of biochemistry
Y1  - 1997
SN  - 0014-2956
VL  - Vol. 244
IS  - Iss. 1
SP  - 155
EP  - 160
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Trinh, Tu Luc
A1  - Dao, Ngoc Tien
A1  - Giap, Van Tan
A1  - Truong, Manh Khuyen
A1  - Dinh, Thuy Ha
A1  - Staat, Manfred
T1  - Limit and shakedown analysis of structures under random strength
T2  - Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training, Hanoi, December 2-3, 2022
N2  - Direct methods comprising limit and shakedown analysis is a branch of computational mechanics. It plays a significant role in mechanical and civil engineering design. The concept of direct method aims to determinate the ultimate load bearing capacity of structures beyond the elastic range. For practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and onstraints. If strength and loading are random quantities, the problem of shakedown analysis is considered as stochastic programming. This paper presents a method so called chance constrained programming, an effective method of stochastic programming, to solve shakedown analysis problem under random condition of strength. In this our investigation, the loading is deterministic, the strength is distributed as normal or lognormal variables.
KW  - Reliability of structures
KW  - Stochastic programming
KW  - Chance constrained programming
KW  - Shakedown analysis
KW  - Limit analysis
Y1  - 2022
SN  - 978-604-357-084-7
SP  - 510
EP  - 518
PB  - Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)
CY  - Hanoi
ER  - 
TY  - JOUR
A1  - Tran, Ngoc Trinh
A1  - Trinh, Tu Luc
A1  - Dao, Ngoc Tien
A1  - Giap, Van Tan
A1  - Truong, Manh Khuyen
A1  - Dinh, Thuy Ha
A1  - Staat, Manfred
T1  - FEM shakedown analysis of structures under random strength with chance constrained programming
JF  - Vietnam Journal of Mechanics
N2  - Direct methods, comprising limit and shakedown analysis, are a branch of computational mechanics. They play a significant role in mechanical and civil engineering design. The concept of direct methods aims to determine the ultimate load carrying capacity of structures beyond the elastic range. In practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and constraints. If strength and loading are random quantities, the shakedown analysis can be formulated as stochastic programming problem. In this paper, a method called chance constrained programming is presented, which is an effective method of stochastic programming to solve shakedown analysis problems under random conditions of strength. In this study, the loading is deterministic, and the strength is a normally or lognormally distributed variable.
KW  - limit analysis
KW  - shakedown analysis
KW  - chance constrained programming
KW  - stochastic programming
KW  - reliability of structures
Y1  - 2022
U6  - http://dx.doi.org/10.15625/0866-7136/17943
SN  - 0866-7136
SN  - 2815-5882
VL  - 44
IS  - 4
SP  - 459
EP  - 473
PB  - Vietnam Academy of Science and Technology (VAST)
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Tran, Thanh Ngoc
A1  - Matthies, Hermann G.
A1  - Stavroulakis, Georgios Eleftherios
A1  - Staat, Manfred
T1  - FEM Shakedown of uncertain structures by chance constrained programming
T2  - PAMM Proceedings in Applied Mathematics and Mechanics
Y1  - 2016
U6  - http://dx.doi.org/10.1002/pamm.201610346
SN  - 1617-7061
N1  - Special Issue:
Joint 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung
VL  - 16
IS  - 1
SP  - 715
EP  - 716
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Tran, Thanh Ngoc
A1  - Matthies, H. G.
A1  - Stavroulakis, G. E.
A1  - Staat, Manfred
ED  - Papadrakakis, M.
T1  - Shakedown analysis of plate bending analysis under stochastic uncertainty by chance constrained programming
T2  - ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5–10 June 2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
T1  - Direct plastic structural design under lognormally distributed strength by chance constrained programming
JF  - Optimization and Engineering
N2  - We propose the so-called chance constrained programming model of stochastic programming theory to analyze limit and shakedown loads of structures under random strength with a lognormal distribution. A dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit and the shakedown limit. The edge-based smoothed finite element method (ES-FEM) is used with three-node linear triangular elements.
Y1  - 2020
U6  - http://dx.doi.org/10.1007/s11081-019-09437-2
SN  - 1573-2924
VL  - 21
IS  - 1
SP  - 131
EP  - 157
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
T1  - Direct plastic structural design under random strength and random load by chance constrained programming
JF  - European Journal of Mechanics - A/Solids
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.euromechsol.2020.104106
SN  - 0997-7538
VL  - 85
IS  - Article 104106
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
T1  - FEM shakedown analysis of Kirchhoff-Love plates under uncertainty of strength
T2  - Proceedings of UNCECOMP 2021
N2  - A new formulation to calculate the shakedown limit load of Kirchhoff plates under stochastic conditions of strength is developed. Direct structural reliability design by chance con-strained programming is based on the prescribed failure probabilities, which is an effective approach of stochastic programming if it can be formulated as an equivalent deterministic optimization problem. We restrict uncertainty to strength, the loading is still deterministic. A new formulation is derived in case of random strength with lognormal distribution. Upper bound and lower bound shakedown load factors are calculated simultaneously by a dual algorithm.
Y1  - 2021
SN  - 978-618-85072-6-5
U6  - http://dx.doi.org/10.7712/120221.8041.19047
N1  - Proceedings of UNCECOMP 2021, 4th International Conference on Uncertainty Quantification in Computational Sciences and Engineering, streamed from Athens, Greece, 28–30 June 2021.
SP  - 323
EP  - 338
ER  -