TY - BOOK A1 - Hardt, Arno T1 - Das Transportsystem BANDIT zur Messung von Halbwertszeiten kurzlebiger, neutronenarmer Isotope Y1 - 1974 N1 - Bonn, Univ., Math.-Naturwiss. Fak., Diss. PB - Univ. CY - Bonn ER - TY - CHAP A1 - Handschuh, Nils A1 - Stollenwerk, Dominik A1 - Borchert, Jörg T1 - Operation of thermal storage power plants under high renewable grid penetration T2 - NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems N2 - The planned coal phase-out in Germany by 2038 will lead to the dismantling of power plants with a total capacity of approx. 30 GW. A possible further use of these assets is the conversion of the power plants to thermal storage power plants; the use of these power plants on the day-ahead market is considerably limited by their technical parameters. In this paper, the influence of the technical boundary conditions on the operating times of these storage facilities is presented. For this purpose, the storage power plants were described as an MILP problem and two price curves, one from 2015 with a relatively low renewable penetration (33 %) and one from 2020 with a high renewable energy penetration (51 %) are compared. The operating times were examined as a function of the technical parameters and the critical influencing factors were investigated. The thermal storage power plant operation duration and the energy shifted with the price curve of 2020 increases by more than 25 % compared to 2015. KW - storage optimisation KW - storage dispatch KW - thermal storage Y1 - 2021 SN - 978-3-8007-5651-3 N1 - NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems. 13-14 September 2021. Hamburg, Germany SP - 261 EP - 265 PB - VDE Verlag CY - Berlin ER - TY - JOUR A1 - Haissig, Manfred A1 - Dören, Horst-Peter A1 - Wilmes, S. T1 - Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der Böhler AG JF - Stahl und Eisen. Zeitschrift für die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenhüttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6 Y1 - 1981 SN - 0340-4803 SP - 383 EP - 390 ER - TY - CHAP A1 - Haissig, M. A1 - Dören, Horst-Peter A1 - Stadler, P. T1 - The horizontal continuous casting process of steel - a contribution to the economic production of unalloyed, alloyed and high alloyed steel T2 - VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universität Linz Y1 - 1981 SP - Vortrag 21 CY - Linz ER - TY - BOOK A1 - Hafner, B. A1 - Schwarzer, Klemens A1 - Plettner-Marliani, J. A1 - Wemhöner, C. A1 - Faber, Christian A1 - Wenzel, T. T1 - Entwicklung einer Heizungs-/Solarthermie "Toolbox" für die Simulationsumgebung MATLAB (EXP trademark) /SIMULINK (EXP trademark) : Abschlussbericht Y1 - 2000 PB - Fachhochschule Aachen CY - Jülich ER - TY - BOOK A1 - Gümpel, Paul A1 - Dören, Horst-Peter A1 - Gebel, Wolfgang A1 - Heimann, Winfried A1 - Morath, Rudolf A1 - Schmitz, Karl W. A1 - Uhlig, Georg T1 - Rostfreie Stähle. Grundwissen, Konstruktions- und Verarbeitungsweise = Stainless steels. 4., völlig neu bearb. Aufl. Kontakt & Studium ; Bd. 493 Y1 - 2008 SN - 978-3-8169-2689-4 PB - Expert-Verl. CY - Renningen ER - TY - BOOK A1 - Gümpel, Paul A1 - Blumhofer, Gunter A1 - Dören, Horst-Peter A1 - Gebel, Wolfgang A1 - Heimann, Winfried A1 - Morach, Rudolf A1 - Schmitz, Karl W. T1 - Rostfreie Stähle : Grundwissen, Konstruktions- und Verarbeitungshinweise Y1 - 2016 SN - 978-3-8169-3148-5 PB - Expertverlag CY - Renningen ET - 5., durchgesehene Aufl. ER - TY - BOOK A1 - Gümpel, Paul A1 - Arlt, Norbert A1 - Dören, Horst-Peter A1 - Heimann, Winfried A1 - Kiesheyer, Heinrich A1 - Schmitz, Karl W. A1 - Uhlig, Georg T1 - Rostfreie Stähle : Grundwissen, Konstruktions- und Verarbeitungshinweise. 3. Aufl. Kontakt & Studium. Bd. 493 Y1 - 2001 SN - 3-8169-1735-6 PB - expert Verl. CY - Renningen ER - TY - BOOK A1 - Gümpel, Paul A1 - Arlt, Norbert A1 - Dören, Horst-Peter A1 - Heimann, Winfried A1 - Kiesheyer, H. A1 - Schmitz, Karl W. A1 - Uhlig, Georg T1 - Rostfreie Stähle. Grundwissen, Konstruktions- und Verarbeitungsweise = Stainless steels. 2., aktualis. Aufl. Kontakt & Studium. Bd. 493 Y1 - 2000 SN - 3-8169-1735-6 PB - Expert-Verl. CY - Renningen ER - TY - BOOK A1 - Gümpel, Paul A1 - Arlt, Norbert A1 - Dören, Horst-Peter A1 - Heimann, Winfried A1 - Kiesheyer, H. A1 - Schmitz, Karl W. A1 - Uhlig, Georg T1 - Rostfreie Stähle. Grundwissen, Konstruktions- und Verarbeitungsweise = Stainless steels. Kontakt & Studium. Bd. 493 Y1 - 1996 SN - 3-8169-1080-7 PB - Expert-Verl. CY - Renningen ER - TY - JOUR A1 - Göttsche, Joachim A1 - Alexopoulos, Spiros A1 - Dümmler, Andreas A1 - Maddineni, S. K. T1 - Multi-Mirror Array Calculations With Optical Error N2 - The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles. KW - solar process heat KW - concentrating collector KW - raytracing KW - point-focussing system Y1 - 2019 SP - 1 EP - 6 ER - TY - CHAP A1 - Gömmel, Andreas A1 - Niendorf, Thoralf A1 - Frauenrath, Tobias A1 - Otten, Mario A1 - Butenweg, Christoph A1 - Kob, Malte T1 - 3D vocal fold geometry mapping using Magnetic Resonance Imaging T2 - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael Möser ... Band 1 Y1 - 2010 SN - 978-3-9808659-8-2 SP - 271 EP - 272 PB - Deutsche Gesellschaft für Akustik CY - Berlin ER - TY - CHAP A1 - Gömmel, Andreas A1 - Krämer, Sebastian A1 - Butenweg, Christoph A1 - Kob, Malte T1 - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers T2 - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ... Y1 - 2005 SN - 978-963-8241-68-9 SP - 2759 EP - 2764 PB - OPAKFI Tud. Egyesület CY - Budapest ER - TY - CHAP A1 - Gömmel, Andreas A1 - Kob, Malte A1 - Niendorf, Thoralf A1 - Butenweg, Christoph T1 - An approach for numerical calculation of glottal flow during glottal closure T2 - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone Y1 - 2009 SN - 978-3-9808659-6-8 SP - 1722 EP - 1725 PB - DEGA CY - Berlin ER - TY - CHAP A1 - Gömmel, Andreas A1 - Frauenrath, Tobias A1 - Otten, Mario A1 - Niendorf, Thoralf A1 - Butenweg, Christoph ED - Möser, Michael ED - Schulte-Fortkamp, Brgitte ED - Ochmann, Martin T1 - In-vivo measurements of vocal fold geometry using Magnetic Resonance Imaging T2 - Fortschritte der Akustik - DAGA 2010 36. Jahrestagung für Akustik, 15. bis 18. März 2010 in Berlin Y1 - 2010 SN - 978-3-9808659-8-2 PB - Deutsche Gesellschaft für Akustik CY - Berlin ER - TY - CHAP A1 - Gömmel, Andreas A1 - Butenweg, Christoph A1 - Kob, Malte T1 - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers T2 - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ... Y1 - 2005 SN - 978-3-9806183-8-0 PB - Univ., Dep. of Orthodontics CY - Ulm ER - TY - JOUR A1 - Gömmel, Andreas A1 - Butenweg, Christoph A1 - Bolender, Katrin A1 - Grunendahl, Arno T1 - A muscle controlled finite-element model of laryngeal abduction and adduction JF - Computer methods in biomechanics and biomedical engineering Y1 - 2007 SN - 1476-8259 (E-Journal); 1025-5842 (Print) VL - Volume 10 IS - Issue 5 SP - 377 EP - 388 ER - TY - CHAP A1 - Gömmel, A. A1 - Butenweg, Christoph A1 - Kob, M. T1 - A fluid-structure interaction model of vocal fold oscillation T2 - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007 N2 - Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed. KW - finite element method KW - fluid structure interaction KW - vocal fold oscillation Y1 - 2007 SN - 978-888453674-7 N1 - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007; Florence; Italy; 13 December 2007 through 15 December 2007 SP - 127 EP - 128 ER - TY - CHAP A1 - Grunendahl, A. A1 - de Rochefort, E. A1 - Butenweg, Christoph T1 - Numerical models for investigating the causes of low back pain due to whole-body vibrations T2 - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2. Y1 - 2005 SN - 978-972-8469-37-3 SP - 905 EP - 914 PB - IST Press CY - Lisbon ER - TY - THES A1 - Groebel, Simone T1 - Zusammensetzung der Biozönose der Methanbildung unter Anwendung molekularbiologischer Methoden : Auswahl und Immobilisierung eines prozesstragenden Organismus auf einem Biosensor mit dem Ziel der Überwachung der Prozessstabilität kommerzieller Biogasanlagen Y1 - 2013 N1 - Diss., Univ., Mathematisch-Naturwiss. Fak., Rostock, 2013 PB - Univ.-Bibliothek CY - Rostock ER - TY - CHAP A1 - Gorzalka, Philip A1 - Dahlke, Dennis A1 - Göttsche, Joachim A1 - Israel, Martin A1 - Patel, Dhruvkumar A1 - Prahl, Christoph A1 - Schmiedt, Jacob Estevam A1 - Frommholz, Dirk A1 - Hoffschmidt, Bernhard A1 - Linkiewicz, Magdalena T1 - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input T2 - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria Y1 - 2018 ER - TY - CHAP A1 - Goldbach, Daniel A1 - Hochrein, Ulrich T1 - Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil T2 - Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren für Test, Prüfung und Diagnose von E/E-Systemen im Kfz : [anlässlich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"] Y1 - 2011 SN - 978-3-8169-3068-6 SP - 175 EP - 194 PB - Expert Verlag CY - Renningen ER - TY - CHAP A1 - Goldbach, Daniel A1 - Ament, Christoph ED - Scharff, Peter T1 - Stabilized reversing with vehicle trailer combinations T2 - Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau Y1 - 2010 SN - 978-3-938843-53-6 SP - 352 EP - 357 PB - Verl. ISLE CY - Ilmenau ER - TY - CHAP A1 - Goldbach, Daniel T1 - Diagnosemaßnahmen in der funktionalen Sicherheit T2 - Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren für Test, Prüfung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard Bäker ... (Hrsg.) Y1 - 2013 SN - 978-3-8169-3221-5 SP - 179 EP - 198 PB - Expert Verlag CY - Renningen ER - TY - CHAP A1 - Goldbach, Daniel T1 - Zuverlässigkeitsanalyse zur Verifikation der Einhaltung von quantitativen Sicherheitsanforderungen. T2 - Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren für Test, Prüfung und Diagnose von E/E-Systemen im Kfz ; [anlässlich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard Bäker ... (Hrsg.) Y1 - 2012 SN - 978-3-8169-3149-2 SP - 116 EP - 132 PB - Expert Verlag CY - Renningen ER - TY - CHAP A1 - Goldbach, Daniel T1 - Management der funktionalen Sicherheit einer Entwicklung eines sicherheitskritischen Systems im Bereich Nutzfahrzeuge T2 - Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, Kaiserslautern / K. Berns ... (ed.) Y1 - 2010 SN - 978-3-8322-9040-5 SP - 487 EP - 495 PB - Shaker CY - Aachen ER - TY - BOOK A1 - Goldbach, Daniel T1 - Zur Verbesserung des Fahrverhaltens von Zugfahrzeug-Anhänger-Gespannen. (Fortschrittberichte VDI. Reihe 12, Verkehrstechnik, Fahrzeugtechnik ; Nr. 703) Y1 - 2009 SN - 978-3-18-370312-8 N1 - Zugl.: Ilmenau, Techn. Univ., Diss., 2009 PB - VDI-Verl. CY - Düsseldorf ER - TY - BOOK A1 - Goldbach, Daniel T1 - Steuerung und Regelung der aktiven Anhängerkupplung eines Farhzeuggespanns Y1 - 2002 N1 - Fulda, Fachhochsch., Dipl.-Arbeit, 2002 ER - TY - CHAP A1 - Goldbach, Daniel ED - Wahl, Michael T1 - Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit T2 - AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beiträge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM) Y1 - 2014 SN - 978-3-8007-3580-8 N1 - GMM-Fachbericht ; 78 SP - 172 EP - 179 PB - VDE-Verl. CY - Berlin ER - TY - JOUR A1 - Goldbach, Daniel T1 - Fahrstabilitätserhöhung bei Gespannen durch Querverschiebung des Anhängerkupplungspunktes JF - mechatronik mobil Y1 - 2010 SN - 1867-7371 VL - 2 IS - 1 SP - 23 EP - 29 PB - Expert Verlag CY - Renningen ER - TY - CHAP A1 - Gkatzogias, Konstantinos A1 - Veljkoviv, Ana A1 - Pohoryles, Daniel A. A1 - Tsionis, Georgios A1 - Bournas, Dionysios A. A1 - Crowley, Helen A1 - Norlén, Hedvig A1 - Butenweg, Christoph A1 - Gervasio, Helena A1 - Manfredi, Vincenzo A1 - Masi, Angelo A1 - Zaharieva, Roumiana ED - Gkatzogias, Konstantinos ED - Tsionis, Georgios T1 - Policy practice and regional impact assessment for building renovation T2 - REEBUILD Integrated Techniques for the Seismic Strengthening & Energy Efficiency of Existing Buildings N2 - The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent. Y1 - 2022 SN - 978-92-76-60454-9 U6 - http://dx.doi.org/10.2760/883122 SN - 1831-9424 SP - 1 EP - 68 PB - Publications Office of the European Union CY - Luxembourg ER - TY - JOUR A1 - Giresini, Linda A1 - Sassu, Mauro A1 - Butenweg, Christoph A1 - Alecci, Valerio A1 - De Stefano, Mario T1 - Vault macro-element with equivalent trusses in global seismic analyses JF - Earthquakes and Structures N2 - This paper proposes a quick and simplified method to describe masonry vaults in global seismic analyses of buildings. An equivalent macro-element constituted by a set of six trusses, two for each transverse, longitudinal and diagonal direction, is introduced. The equivalent trusses, whose stiffness is calculated by fully modeled vaults of different geometry, mechanical properties and boundary conditions, simulate the vault in both global analysis and local analysis, such as kinematic or rocking approaches. A parametric study was carried out to investigate the influence of geometrical characteristics and mechanical features on the equivalent stiffness values. The method was numerically validated by performing modal and transient analysis on a three naves-church in the elastic range. Vibration modes and displacement time-histories were compared showing satisfying agreement between the complete and the simplified models. This procedure is particularly useful in engineering practice because it allows to assess, in a simplified way, the effectiveness of strengthening interventions for reducing horizontal relative displacements between vault supports. KW - vault KW - macro-element KW - equivalent stiffness KW - truss KW - churches Y1 - 2017 U6 - http://dx.doi.org/10.12989/eas.2017.12.4.409 SN - 2092-7614 (Print) SN - 2092-7622 (Online) VL - 12 IS - 4 SP - 409 EP - 423 PB - Techno-Press CY - Taejŏn ER - TY - CHAP A1 - Giresini, Linda A1 - Butenweg, Christoph A1 - Andreini, M. A1 - De Falco, A. A1 - Sassu, M. T1 - Numerical calibration of a macro-element for vaultes system in historic churches T2 - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City Y1 - 2014 SP - 1 EP - 12 ER - TY - CHAP A1 - Giresini, Linda A1 - Butenweg, Christoph A1 - Andreini, M. A1 - De Falco, A. A1 - Sassu, M. T1 - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna T2 - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City Y1 - 2014 SP - 1 EP - 12 ER - TY - CHAP A1 - Giresini, Linda A1 - Butenweg, Christoph T1 - Earthquake resistant design of structures according to Eurocode 8 T2 - Structural Dynamics with Applications in Earthquake and Wind Engineering N2 - The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail. KW - Seismic design KW - Eurocode 8 KW - Design examples KW - Response spectrum KW - Pushover analysis Y1 - 2019 SN - 978-3-662-57550-5 (Online) SN - 978-3-662-57548-2 (Print) U6 - http://dx.doi.org/10.1007/978-3-662-57550-5_4 SP - 197 EP - 358 PB - Springer CY - Berlin ER - TY - RPRT A1 - Ghinaiya, Jagdishkumar A1 - Lehmann, Thomas A1 - Göttsche, Joachim T1 - LOCAL+ – ein kreislauffähiger Holzmodulbau mit nachhaltigem Energie- und Wohnraumkonzept T2 - Bauphysik N2 - Mit dem Beitrag des Teams der FH Aachen zum SDE 21/22 wird im Projekt LOCAL+ ein kreislauffähiger Holzmodulbau mit einem innovativen Wohnraumkonzept geplant und umgesetzt. Ziel dieses Konzeptes ist die Verringerung des stetig steigenden Wohnflächenbedarfs durch ein Raum-in-Raum Konzept. Gebäudetechnisch wird in dem Projekt nicht nur das Einzelgebäude betrachtet, sondern unter Berücksichtigung des Gebäudebestandes wird für das Quartier ein innovatives und nachhaltiges Energiekonzept entwickelt. Ein zentrales Wasserstoffsystem ist für ein Quartier geplant, um den Stromverbrauch aus dem Netz im Winter zu reduzieren. Zentraler Bestandteil des TGA-Konzepts ist ein unterirdischer Eisspeicher, eine PVT und eine Wärmepumpe mit intelligenter Regelstrategie. Ein Teil des neuen Gebäudes (Design Challenge DC) wird in Wuppertal als Hausdemonstrationseinheit (HDU) präsentiert. Eine hygrothermische Simulation der HDU wurde mit der WUFI-Software durchgeführt. Da im Innenraum Lehmmodule und -platten als Feuchtigkeitspuffer verwendet werden, spielen die Themen Feuchtigkeit, Holzfäule und Schimmelwachstum eine wichtige Rolle. KW - Energiekonzept KW - Gesamtwassergehalt KW - Feuchtigkeit KW - Verdunstungskälte KW - energy concept Y1 - 2022 U6 - http://dx.doi.org/10.1002/bapi.202200010 SN - 0171-5445 (Print) SN - 1437-0980 (Online) VL - 44 IS - 3 SP - 136 EP - 142 PB - Ernst & Sohn CY - Hoboken ER - TY - CHAP A1 - Gerling, Ulrich A1 - Vogelsang, D. T1 - Temperaturfeldberechnungen mit ASKA unter Berücksichtigung des Phasenübergangs fest/flüssig T2 - FEM '89 Congress : International FEM-Congress, Baden-Baden, Federal Republic of Germany, 20./21. November 1989 Y1 - 1989 SP - 295 EP - 314 PB - IKOSS CY - Stuttgart ER - TY - JOUR A1 - Gerling, Ulrich A1 - Predel, Bruno T1 - Beitrag zur Frage nach der Assoziatbildung in flüssigen Antimon-Zink-Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 1 Y1 - 1986 SN - 0044-3093 ; 0179-4841 SP - 17 EP - 25 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Predel, Bruno T1 - Assoziation in flüssigen Gold-Zink-Legierungen und die Zuverlässigkeit der Modellparameter JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 75, H. 8 Y1 - 1984 SN - 0044-3093 ; 0179-4841 SP - 592 EP - 598 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Predel, Bruno T1 - Berechnung der Parameter des Assoziatmodells für binäre Legierungen nach der Methode der kleinsten Summe der Fehlerquadrate JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 12 Y1 - 1983 SN - 0044-3093 ; 0179-4841 SP - 810 EP - 818 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Predel, Bruno T1 - Zur Kenntnis thermodynamischer Eigenschaften flüssiger Kupfer-Zink-Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 3 Y1 - 1980 SN - 0044-3093 ; 0179-4841 SP - 158 EP - 164 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Predel, Bruno T1 - Zur Kenntnis thermodynamischer Eigenschaften flüssiger Gold-Zink-Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 2 Y1 - 1980 SN - 0044-3093 ; 0179-4841 SP - 79 EP - 84 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Pool, M. J. A1 - Predel, Bruno T1 - A contribution to the associate model for binary liquid alloys = Ein Beitrag zum Assoziat-Modell für binäre flüssige Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 9 Y1 - 1983 SN - 0044-3093 ; 0179-4841 SP - 616 EP - 619 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Pool, M. J. A1 - Predel, Bruno T1 - Zur Kenntnis thermodynamischer Eigenschaften flüssiger Silber-Zink-Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 4 Y1 - 1979 SN - 0044-3093 ; 0179-4841 SP - 224 EP - 229 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Lück, Reinhard A1 - Predel, Bruno T1 - Thermodynamische Untersuchungen im System Antimon-Germanium-Zink JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 78, H. 1 Y1 - 1987 SN - 0044-3093 ; 0179-4841 SP - 13 EP - 18 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Lück, Reinhard A1 - Predel, Bruno T1 - Thermodynamische Untersuchung flüssiger Legierungen des Systems Silber-Gold-Zink JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 11 Y1 - 1986 SN - 0044-3093 ; 0179-4841 SP - 730 EP - 738 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Lück, Reinhard A1 - Predel, Bruno T1 - Assoziation in flüssigen Antimon-Zink-Legierungen und die Berücksichtigung der Größenverhältnisse der Teilchen in der Schmelze JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 2 Y1 - 1986 SN - 0044-3093 ; 0179-4841 SP - 80 EP - 86 ER - TY - JOUR A1 - Gerling, Ulrich A1 - Lück, Reinhard A1 - Predel, Bruno T1 - Assoziation in flüssigen Germanium-Zink-Legierungen JF - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 6 Y1 - 1986 SN - 0044-3093 ; 0179-4841 SP - 489 EP - 496 ER - TY - THES A1 - Gerling, Ulrich T1 - Thermodynamische Untersuchungen im System Silber-Gold-Zink zur Erschließung der Assoziatgleichgewichte Y1 - 1981 N1 - Stuttgart, Univ., Diss., 1981 ER - TY - JOUR A1 - Georg, Jörg Heiner A1 - Stollenwerk, Dominik A1 - Reinkensmeier, Sebastian A1 - Jungbluth, Christian T1 - „Smartes“ Laden an öffentlich zugänglichen Ladesäulen – Teil 1: Quo vadis, Marktdesign? JF - Energiewirtschaftliche Tagesfragen : et ; Zeitschrift für Energiewirtschaft, Recht, Technik und Umwelt Y1 - 2021 SN - 0720-6240 SN - 0013-743X VL - 71 IS - 1/2 SP - 64 EP - 69 PB - ETV Energieverlag CY - Essen ER -