TY - BOOK A1 - Breitbach, Gerd A1 - Beckmöller, S. A1 - Penkalla, H. J. T1 - Inelastische Analyse des Verformungsverhaltens einer innengekühlten Gasturbinenschaufel aus dem Werkstoff IN 738 LC unter Verwendung des strukturabhängigen Werkstoffmodells / S. Beckmöller ; H. J. Penkalla ; G. Breitbach ... Y1 - 1994 N1 - Zugl.: Aachen, Techn. Hochsch., Diss., 1994. - (Berichte des Forschungszentrums Jülich ; 2924) PB - Forschungszentrum Jülich, Zentralbibliothek CY - Jülich ER - TY - JOUR A1 - Breitbach, Gerd A1 - Altes, Jürgen A1 - Szimmat, J. T1 - Anwendung der Finite-Element-Methode bei der Berechnung des Wärmetransports durch Strahlung / J. Altes ; G. Breitbach ; J. Szimmat JF - International FEM-Congress : Baden-Baden, Federal Republic of Germany, 17./18. November 1986 Y1 - 1989 N1 - International FEM Congress <15, 1986, Baden-Baden> SP - 127 EP - 148 PB - IKO Software Service GmbH CY - Stuttgart ER - TY - BOOK A1 - Breitbach, Gerd A1 - Altes, Jürgen A1 - David, H.-P. T1 - Sicherheitstechnische Untersuchungen zum Störfallverhalten des HTR-500 : Erg.-Bd. mit vertiefenden Einzelbeitr. zum Bericht Jül-Spez-220 / [Kernforschungsanlage Jülich GmbH, Inst. für Nukleare Sicherheitsforschung]. Von J. Altes ; G. Breitbach ; H.-P. David ... Y1 - 1984 N1 - Literaturangaben. - Bildet d. Erg. zu: Zum Störverhalten des HTR 500. - Als Ms. gedr. PB - Zentralbibliothek der Kernforschungsanlage CY - Jülich ER - TY - BOOK A1 - Breitbach, Gerd A1 - Altes, Jürgen T1 - Zum Störfallverhalten des HTR 500 : eine Trendanalyse / [KFA, Kernforschungsanlage Jülich GmbH, Inst. für Nukleare Sicherheitsforschung]. Von J. Altes ; G.Breitbach... Y1 - 1983 N1 - Als Ms. gedr. - Institut für Nukleare Sicherheitsforschung PB - Zentralbibliothek der Kernforschungsanlage CY - Jülich ER - TY - BOOK A1 - Breitbach, Gerd A1 - Altes, Jürgen T1 - Anwendung der Finite Elemente Methode auf Probleme mit Wärmestrahlungsaustausch Y1 - 1985 N1 - (Berichte der Kernforschungsanlage Jülich / Kernforschungsanlage ; 2013) PB - Zentralbibliothek der Kernforschungsanlage CY - Jülich ER - TY - CHAP A1 - Breitbach, Gerd A1 - Alexopoulos, Spiros A1 - May, Martin A1 - Teixeira Boura, Cristiano José A1 - Herrmann, Ulf T1 - Analysis of volumetric solar radiation absorbers made of wire meshes T2 - AIP Conference Proceedings Y1 - 2019 U6 - https://doi.org/10.1063/1.5117521 SN - 0094243X VL - 2126 SP - 030009-1 EP - 030009-6 ER - TY - CHAP A1 - Breitbach, Gerd A1 - Alexopoulos, Spiros A1 - Hoffschmidt, Bernhard T1 - Fluid flow in porous ceramic multichannel crossflower filter modules Y1 - 2007 PB - COMSOL Inc. CY - Burlington, Mass. ER - TY - BOOK A1 - Breitbach, Gerd A1 - Ahmed, K. A1 - Over, H. T1 - Ermittlung von Sicherheitsabständen bei Kriechbelastung von Primärkreiskomponenten durch Simulation von Druckentlastungsstörfällen einer HTR-Anlage (SR 383) : Abschlußbericht Y1 - 1991 N1 - (Berichte des Forschungszentrums Jülich ; 2537) PB - Forschungszentrum Jülich, Zentralbibliothek CY - Jülich ER - TY - JOUR A1 - Breitbach, Gerd T1 - Spannungs- und Kriechschädigungsanalyse für die Rohre eines HTR-beheizten Röhrenspaltofens JF - Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V. Y1 - 1983 SN - 0173-0924 N1 - 2. ISSN: 0720-9207. - Kerntechnische Gesellschaft. - Jahrestagung Kerntechnik <1983, Berlin> SP - 659 EP - 662 PB - Deutsches Atomforum CY - Bonn ER - TY - BOOK A1 - Breitbach, Gerd T1 - Proceedings of the Workshop on Structural Design Criteria for HTR : Jülich, 31. January - 1. February 1989 / ed.: G. Breitbach ... - Als Ms. gedr. Y1 - 1989 N1 - (Berichte der Kernforschungsanlage Jülich : Jül-Conf. ; 71) ; Workshop on Structural Design Criteria for HTR <1989, Jülich> PB - Zentralbibliothek d. Kernforschungsanlage CY - Jülich ER - TY - RPRT A1 - Breitbach, Gerd T1 - Endbericht für das Projekt FilterCaps : Vorhabensbezeichnung: Entwicklung eines Wärmespeichers für strömungsrichtungsinvertierende Lüftungssysteme mit integrierter Filterwirkung : Förderkennzeichen: 1752X06 Y1 - 2009 ER - TY - THES A1 - Breitbach, Evgeniya T1 - goodays Garderobe : eine Saison & Wetter orientierte Station N2 - Garderobe- ist ein Möbelstück, dessen Nutzungsbedingungen alleine von den Jahreszeiten und dem Wetter bestimmt werden. Mit dem Wechsel der Saison verändert sich auch unsere Garderobe. Garderobe ist auch erstes Erscheinungsbild eines Zuhauses, welches vieles über deren Bewohner verrät. Goodays ist eine erweiterungsfähige und nach dem Wetter/Zweck veränderbare Station. Es gibt Feuchtigkeit und Schmutz orientierte Flächen und lüftungsfähige Räume, um Gerüche zu vermeiden. Die Dimensionen sind flexibel, was nicht viel Platz und Lichtfang wegnimmt. Die Tiefe des Möbelstückes entspricht den notwendigen Kleidern und Schuhmaßen. Verschiede Bestandteile der Kollektion unterstützen bei der Forderung zur Ruhe und verringern den visuellen Lärm. Geschlossene Stauräume sorgen für mehr Ordnung und Neutralität. Die Station bietet Komfort in der Form von Sitzfläche und ausreichender Ablagefläche. KW - Garderobe KW - Wetterwechsel KW - Modularität KW - Erweiterung Y1 - 2022 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Brauweiler, Philipp T1 - incontrare : Gestaltung eines Meeting Raumes durch Konzeptmöbel N2 - Incontrare, was übersetzt Begegnung bedeutet, ist ein Konferenztischkonzept, der durch seinen modularen Aufbau heraus sticht. Dem Kunden ist es möglich das Produkt mit einem einzigen Werkzeug - fünfer Imbusschlüssel - aufzubauen. Der modulare Aufbau bietet die Möglichkeit kundenorientiert ein Produkt zusammensetzen zu können. Incontrare bietet hierdurch eine Vielzahl an Variationen, die nicht nur die gestalterischen Aspekte anspricht, sondern auch verschiedene Preisklassen abdeckt. Incontrare ist ein Tischkonzept, das sowohl im niederpreisigen , sowie auch im HighEnd Bereich funktioniert. KW - Begegnung KW - Verschieben KW - Stimmung KW - Regalkonzept KW - Imbussschlüssel Y1 - 2024 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Braunstein, Bjoern A1 - Goldmann, Jan-Peter A1 - Albracht, Kirsten A1 - Sanno, Maximilian A1 - Willwacher, Steffen A1 - Heinrich, Kai A1 - Herrmann, Volker A1 - Brüggemann, Gert-Peter T1 - Joint specific contribution of mechanical power and work during acceleration and top speed in elite sprinters T2 - 31 International Conference on Biomechanics in Sports, Taipei, Taiwan, July 07 - July 22, 2013 Y1 - 2013 SN - 1999-4168 ER - TY - CHAP A1 - Brauner, Philipp A1 - Vervier, Luisa A1 - Brillowski, Florian A1 - Dammers, Hannah A1 - Steuer-Dankert, Linda A1 - Schneider, Sebastian A1 - Baier, Ralph A1 - Ziefle, Martina A1 - Gries, Thomas A1 - Leicht-Scholten, Carmen A1 - Mertens, Alexander A1 - Nagel, Saskia K. T1 - Organization Routines in Next Generation Manufacturing T2 - Forecasting Next Generation Manufacturing N2 - Next Generation Manufacturing promises significant improvements in performance, productivity, and value creation. In addition to the desired and projected improvements regarding the planning, production, and usage cycles of products, this digital transformation will have a huge impact on work, workers, and workplace design. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these changes, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the organization dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we highlight seven areas in which the digital transformation of production will change how we work, how we organize the work within a company, how we evaluate these changes, and how employment and labor rights will be affected across company boundaries. The experts are unsure whether the use of collaborative robots in factories will replace traditional robots by 2030. They believe that the use of hybrid intelligence will supplement human decision-making processes in production environments. Furthermore, they predict that artificial intelligence will lead to changes in management processes, leadership, and the elimination of hierarchies. However, to ensure that social and normative aspects are incorporated into the AI algorithms, restricting measurement of individual performance will be necessary. Additionally, AI-based decision support can significantly contribute toward new, socially accepted modes of leadership. Finally, the experts believe that there will be a reduction in the workforce by the year 2030. Y1 - 2022 SN - 978-3-031-07734-0 U6 - https://doi.org/10.1007/978-3-031-07734-0_5 SP - 75 EP - 94 PB - Springer CY - Cham ER - TY - CHAP A1 - Braun, Sebastian A1 - Höfken, Hans-Wilhelm A1 - Schuba, Marko A1 - Breuer, Michael T1 - Forensische Sicherung von DSLRoutern T2 - Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015 Y1 - 2015 ER - TY - CHAP A1 - Braun, Sebastian A1 - Cheng, Chi-Tsun A1 - Lai, Chow Yin A1 - Wollert, Jörg T1 - Microservice Architecture for Automation - Realization by the example of a model-factory’s manufacturing execution system T2 - Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019 Y1 - 2019 SP - 33 EP - 37 ER - TY - CHAP A1 - Braun, Sebastian A1 - Cheng, Chi-Tsun A1 - Dowey, Steve A1 - Wollert, Jörg T1 - Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems T2 - 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), Proceedings N2 - The increasing digitalization brings new opportunities but also puts new challenges to modern industrial systems. Software agents are one of the key technologies towards self-optimizing factories and are currently used to address the needs of cyber-physical production systems (CPPS). However their interplay in industrial settings needs to be understood better.This paper focusses on securing a cloud infrastructure for multi-agent systems for industrial sites. An industrial site contains multiple production processes that need to communicate with each other and each physical resource is abstracted with a software agent. This volatile architecture needs to be managed and protected from manipulation. The proposed infrastructure presents a security concept for TCP/IP communication between agents, machines, and external networks. It is based on open-source software and tested on a three-node edge cloud controlling a model-plant. Y1 - 2020 U6 - https://doi.org/10.1109/ISIE45063.2020.9152210 N1 - 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), 17 - 19 June, 2020, Delft, Netherlands PB - IEEE CY - New York, NY ER - TY - JOUR A1 - Braun, Sebastian A1 - Cheng, Chi-Tsun A1 - Dowey, Steve A1 - Wollert, Jörg T1 - Performance evaluation of skill-based order-assignment in production environments with multi-agent systems JF - IEEE Journal of Emerging and Selected Topics in Industrial Electronics N2 - The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models. KW - cyber-physical production systems KW - event-based simulation KW - multi-agent systems KW - digital factory KW - industrial agents Y1 - 2021 U6 - https://doi.org/10.1109/JESTIE.2021.3108524 SN - 2687-9735 IS - Early Access PB - IEEE CY - New York ER - TY - THES A1 - Braun, Linus T1 - Faces - Lebenswerte Mobilität in Städten N2 - Mobilität stellt oftmals ein Problem in Städten dar. Es sind Staus, Abgase, Platzmangel, die sich negativ auf die urbane Lebensqualität auswirken. Dies sind externe Auswirkungen der von Autos dominierten Mobilität. Ziel von „Faces“ war es, eine effiziente und vor allem attraktive Alternative zum Automobil zu bieten. Dafür denkt das Projekt die Straßenbahn neu. Durch kompaktes Design und die Verwendung autonomer Systeme wird eine höhere Taktung ermöglicht. Zudem werden die Bahnen flexibler und können den Einsatz am Mobilitätsbedarf anpassen. Um den Bedürfnissen der Fahrgäste gerecht zu werden, lässt sich das modulare Interior an die Reisedistanz anpassen. Hier wird ein Mobilitätskonzept gezeichnet, das einem mit einem hoffnungsvollen Blick auf das Leben in den Städten der Zukunft zurücklässt. KW - Mobilität KW - Zukunftsstädte KW - Urbanes Leben KW - Bahnen Y1 - 2022 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - GEN A1 - Braun, Lena A1 - Krafft, Simone A1 - Tippkötter, Nils T1 - Combined supercritical carbon dioxide extraction and chromatography of the algae fatty linoleic and linolenic acid T2 - Chemie Ingenieur Technik N2 - A method for the integrated extraction and separation of fatty acids from algae using supercritical CO2 is presented. Desmodesmus obliquus and Chlorella sorokiniana were used as algae. First, a method for chromatographic separation of fatty acids of different degrees of saturation was established and optimized. Then, an integrated method for supercritical extraction was developed for both algal species. It was also verified whether prior cell disruption was beneficial for extraction. In developing the method for chromatographic separation, statistical experimental design was used to determine the optimal parameter settings. The methanol content in the mobile phase proved to be the most important parameter for successful separation of the three unsaturated fatty acids oleic acid, linoleic acid, and linolenic acid. Supercritical extraction with dried algae showed that about four times more fatty acids can be extracted from C. sorokiniana relative to the dry mass used. Y1 - 2022 U6 - https://doi.org/10.1002/cite.202255308 SN - 0009-286X SN - 1522-2640 (eISSN) N1 - ProcessNet and DECHEMA‐BioTechNet Jahrestagungen 2022 together with 13th ESBES Symposium 2022, 12. - 15. September 2022, Eurogress Aachen VL - 94 IS - 9 SP - 1304 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Braun, Carsten A1 - Boucke, Alexander A1 - Hanke, M. A1 - Karavas, Alexandros A1 - Ballmann, Josef T1 - Prediction of the model deformation of a high speed transport aircraft type wing by direct aeroelastic simulation T2 - High performance computing in science and engineering '03. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2003 / Eds.: Egon Krause ... Y1 - 2003 SN - 978-3-540-40850-5 SP - 331 EP - 342 PB - Springer CY - Berlin ER - TY - CHAP A1 - Braun, Carsten A1 - Boucke, Alexander A1 - Ballmann, Josef T1 - Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model T2 - High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ... Y1 - 2005 SN - 3-540-22943-4 SP - 225 EP - 236 PB - Springer CY - Berlin ER - TY - CHAP A1 - Braun, Carsten A1 - Boucke, Alexander A1 - Ballmann, Josef T1 - Numerical prediction of the wing deformation of a high speed transport aircraft type wind tunnel model by direct aeroelastic simulation T2 - Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : München, June 28 - July 1, 2005. DGLR-Bericht. 2005,04 Y1 - 2005 SN - 3-932182-43-X PB - DGLR CY - Bonn ER - TY - BOOK A1 - Braun, Carsten T1 - Ein modulares Verfahren für die numerische aeroelastische Analyse von Luftfahrzeugen N2 - Aachen, Techn. Hochschule, Diss., 2007 Y1 - 2007 ER - TY - CHAP A1 - Braun, Carsten T1 - Ein modulares Verfahren für die numerische aeroelastische Analyse von Luftfahrzeugen T2 - Motto: Wissen und Visionen für ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008 Y1 - 2008 SP - 787 EP - 796 PB - DGLR CY - Bonn ER - TY - CHAP A1 - Brandt, D. A1 - Güsken, J. A1 - Büchen, W. A1 - Wahle, Michael A1 - Huppatz, W. A1 - Koewius, A. A1 - Linn, W. A1 - Sedlaceck, G. T1 - Konstruieren mit Aluminium [Kapitel 4] T2 - Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale Düsseldorf. - Bd. 3: Weiterverarbeitung und Anwendung Y1 - 1997 SN - 3-87017-243-6 SP - 359 EP - 544 PB - Aluminium-Verlag CY - Düsseldorf ET - 15. Auflage ER - TY - CHAP A1 - Brandini, Frederico P. A1 - Baumann, Marcus T1 - The potential role of melted 'brown ice' as sources of chelators and ammonia to the surface waters of the Weddell Sea, Antarctica T2 - Proceedings of the NIPR Symposium on Polar Biology : 10 Y1 - 1997 SN - 0914-563X SP - 1 EP - 13 CY - Tokyo ER - TY - CHAP A1 - Brandes, Sinja A1 - Gligorevic, Snjezana A1 - Schnell, Michael A1 - Rokitansky, Carl-Herbert A1 - Ehammer, Max A1 - Gräupl, Thomas A1 - Schlereth, Armin A1 - Rihacek, Christoph T1 - Final assessment of the B-VHF overlay concept T2 - IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont. Y1 - 2007 SN - 1-4244-0525-4 SP - 1 EP - 18 ER - TY - CHAP A1 - Brandes, Sinja A1 - Epple, U. A1 - Gligorevic, Snjezana A1 - Schnell, Michael A1 - Haindl, Bernhard A1 - Sajatovic, Miodrag T1 - Physical layer specification of the L-band Digital Aeronautical Communications System (L-DACS1) T2 - Integrated Communications, Navigation and Surveillance Conference : ICNS '09 : 13 - 15 May 2009, Arlington, Va. Y1 - 2009 SN - 978-1-4244-4733-6 ; 978-1-4244-4734-3 SP - 1 EP - 12 ER - TY - JOUR A1 - Brahma, Aischarya A1 - Musio, Biagia A1 - Ismayilova, Uliviya A1 - Nikbin, Nikzad A1 - Kamptmann, Sonja B. A1 - Siegert, Petra A1 - Jeromin, Günter Erich A1 - Ley, Steven A1 - Pohl, Martina T1 - An orthogonal biocatalytic approach for the safe generation and use of HCN in a multi-step continuous preparation of chiral O-acetylcyanohydrins JF - Synlett Y1 - 2015 U6 - https://doi.org/10.1055/s-0035-1560644 SN - 0936-5214 (Print) ; 1437-2096 (e-Journal) IS - Publ. online 29.09.2015 PB - Thieme CY - Stuttgart ER - TY - JOUR A1 - Bragard, Michael A1 - van Hoek, H. A1 - De Doncker, R. W. T1 - A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance JF - IEEE transactions on power electronics N2 - This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided. Y1 - 2012 U6 - https://doi.org/10.1109/TPEL.2012.2189136 SN - 0885-8993 VL - 27 IS - 9 SP - 4163 EP - 4171 PB - IEEE CY - New York ER - TY - CHAP A1 - Bragard, Michael A1 - Sube, Maike A1 - Schneider, Maike A1 - Jungemann, Christoph T1 - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System T2 - 2019 20th International Conference on Research and Education in Mechatronics (REM) Y1 - 2019 SN - 978-1-5386-9257-8 U6 - https://doi.org/10.1109/REM.2019.8744132 SP - 1 EP - 6 ER - TY - JOUR A1 - Bragard, Michael A1 - Soltau, N. A1 - Thomas, S. A1 - De Doncker, R. W. T1 - The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems JF - IEEE transactions on power electronics N2 - The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage. Y1 - 2010 U6 - https://doi.org/10.1109/TPEL.2010.2085455 SN - 0885-8993 VL - 25 IS - 12 SP - 3049 EP - 3056 PB - IEEE CY - New York ER - TY - CHAP A1 - Bragard, Michael A1 - Soltau, N. A1 - De Doncker, R. W. A1 - Schmiegel, A. T1 - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter T2 - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies] Y1 - 2010 SN - 978-1-4244-5286-6 (Print) SN - 978-1-4244-5287-3 (Online) U6 - https://doi.org/10.1109/ECCE.2010.5618220 SP - 2944 EP - 2949 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Bragard, Michael A1 - Ronge, C. A1 - De Doncker, R. W. T1 - Sandwich design of high-power thyristor based devices with integrated MOSFET structure T2 - Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom Y1 - 2011 SN - 978-1-61284-167-0 (Print) SN - 978-90-75815-15-3 (Online) PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Bragard, Michael A1 - Richter, S. A. T1 - LED-Kreisel als Praxis-Booster JF - Elektor : electronics worldwide Y1 - 2008 SN - 0932-5468 VL - 39 IS - 12 SP - 16 ER - TY - CHAP A1 - Bragard, Michael A1 - Köllensperger, P. A1 - De Doncker, R. W. ED - Dmowski, Antoni T1 - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit T2 - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne Y1 - 2007 SN - 83-918709-7-9 SP - 7.1 EP - 7.9 PB - APS Energia CY - Warszawa ER - TY - PAT A1 - Bragard, Michael A1 - Hüning, Felix A1 - Kowalewski, Paul T1 - Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift] N2 - Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gewählt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege überdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege überdeckt ist. Y1 - 2023 N1 - Offenlegungschrift zu DE102022115350A1 2023.12.21 ER - TY - CHAP A1 - Bragard, Michael A1 - Hoek, Hauke van A1 - Hoegen, Anne von A1 - Doncker, Rik W. De T1 - Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top T2 - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) Y1 - 2018 SN - 978-1-5386-6903-7 U6 - https://doi.org/10.1109/RTUCON.2018.8659810 SP - 1 EP - 6 ER - TY - CHAP A1 - Bragard, Michael A1 - Gottschlich, J. A1 - De Doncker, R. W. T1 - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure T2 - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...] Y1 - 2011 SN - 978-1-61284-958-4 (Print) SN - 978-1-61284-956-0 (Online) U6 - https://doi.org/10.1109/ICPE.2011.5944661 SP - 1182 EP - 1189 PB - IEEE CY - Piscataway, NJ ER - TY - PAT A1 - Bragard, Michael A1 - De Doncker, R. W. A1 - Mura, F A1 - Dick, C. T1 - Halbleiterbauelement und Verfahren zur Herstellung desselben [Offenlegungsschrift] T1 - Semiconductor element and method producing the same [patent application] Y1 - 2011 PB - Deutsches Patent- und Markenamt / Europäisches Patentamt / WIPO CY - München / Den Hague / Geneva ER - TY - JOUR A1 - Bragard, Michael A1 - Conrad, M. A1 - van Hoek, H. A1 - De Doncker, R. W. T1 - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off JF - IEEE transactions on industry applications Y1 - 2011 U6 - https://doi.org/10.1109/TIA.2011.2161432 SN - 0093-9994 VL - 47 IS - 5 SP - 2175 EP - 2182 PB - IEEE CY - New York ER - TY - CHAP A1 - Bragard, Michael A1 - Conrad, M. A1 - De Doncker, R. W. T1 - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off T2 - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies] Y1 - 2010 SN - 978-1-4244-5286-6 (Print) SN - 978-1-4244-5287-3 (Online) U6 - https://doi.org/10.1109/ECCE.2010.5618410 SP - 4551 EP - 4557 PB - IEEE CY - Piscataway, NJ ER - TY - PAT A1 - Bragard, Michael A1 - Budde, W. O. A1 - Hente, D. A1 - Jacobs, J. H. A. M. A1 - Waffenschmidt, E. T1 - Lighting system : [patent of invention] T1 - Beleuchtungssystem : [Patentschrift] Y1 - 2008 N1 - Außerdem veröffentlicht als: TW200817630 (A), TWI402458 (B), RU2009106047 (A), RU2440636 (C2), KR20090042806 (A), KR101423467 (B1), JP2009545103 (A), JP5265540 (B2), CN101490772 (A) und CN101490772 (B) PB - WIPO / United States Patent and Trademark Office CY - Geneva / Alexandria, VA ER - TY - JOUR A1 - Bragard, Michael A1 - Bragard, G. T1 - Erweiterungen für das CBL2-Messinterface von Texas-Instruments JF - Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur Förderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V. N2 - Das von Texas-Instruments (TI) vertriebene Interface CBL2 wird über einige TI-Grafik-Rechner (TI-92, TI-89 usw.) angesteuert. Wegen seiner Handlichkeit wird dieses System beim Unterricht in wechselnden Räumen »großen« Messwerterfassungssystemen oft vorgezogen. Das CBL2 bietet drei analoge Eingänge, die immerhin mit 10 Bit Auflösung und bis zu einer Frequenz von 50 kHz arbeiten. Weiterhin besitzt das CBL2 eine Buchse für angeblich nur einen digitalen Ein- bzw. Ausgang. An diesem Eingang wird standardmäßig hauptsächlich der Bewegungssensor CBR betrieben. In diesem Beitrag werden Erweiterungsmöglichkeiten dieses Anschlusses beschrieben. Y1 - 2003 SN - 0025-5866 N1 - Zugang nur für MNU-Mitglieder! VL - 56 IS - 2 SP - 87 EP - 88 PB - Seeberger CY - Neuss ER - TY - THES A1 - Bragard, Michael T1 - The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beiträge des ISEA ; 62) N2 - This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified. Y1 - 2012 SN - 978-3-8440-1152-4 N1 - Zugl.: Aachen, Techn. Hochsch., Diss., 2012 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Bragard, Michael T1 - Effektvoller LED-Kreisel : zeigt Text wie programmiert, wenn er rotiert JF - Elektor : electronics worldwide N2 - Wenn eine runde Platine mit LED-Zeile rotiert, entstehen leuchtende Ringe. Steuert man die LEDs mit einem Mikrocontroller an, lassen sich aber auch "stehende" Bilder darstellen. Unser elektronischer Kreisel kann Buchstaben und Ziffern anzeigen. Dabei wird das Erdmagnetfeld auf clevere Weise zur Synchronisation genutzt. Hier reichen die Anwendungen vom Rundenzähler bis zum Kompass! Y1 - 2008 SN - 0932-5468 VL - 39 IS - 12 SP - 18 EP - 23 ER - TY - JOUR A1 - Bragard, G. A1 - Bragard, Michael T1 - Ein kostengünstiges, universelles Modellbauinterface JF - Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur Förderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V. N2 - Wir stellen einen USB-Baustein vor, der eine kostengünstige und universelle Möglichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalität orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen Lösungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir über ein Beispiel aus dem Unterrichtseinsatz. Y1 - 2012 SN - 0025-5866 VL - 65 IS - 5 SP - 290 EP - 293 PB - Seeberger CY - Neuss ER - TY - JOUR A1 - Braband, Henrik A1 - Yegen, Eda A1 - Paulßen, Elisabeth A1 - Abram, Ulrich T1 - [{ReN(PMe2Ph)3}{ReO3N}]2 – Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2− JF - Zeitschrift für anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry Y1 - 2005 U6 - https://doi.org/10.1002/zaac.200500240 SN - 1521-3749 VL - 631 IS - 12 SP - 2408 EP - 2410 ER -