TY - JOUR A1 - Grieger, Niklas A1 - Schwabedal, Justus T. C. A1 - Wendel, Stefanie A1 - Ritze, Yvonne A1 - Bialonski, Stephan T1 - Automated scoring of pre-REM sleep in mice with deep learning JF - Scientific Reports N2 - Reliable automation of the labor-intensive manual task of scoring animal sleep can facilitate the analysis of long-term sleep studies. In recent years, deep-learning-based systems, which learn optimal features from the data, increased scoring accuracies for the classical sleep stages of Wake, REM, and Non-REM. Meanwhile, it has been recognized that the statistics of transitional stages such as pre-REM, found between Non-REM and REM, may hold additional insight into the physiology of sleep and are now under vivid investigation. We propose a classification system based on a simple neural network architecture that scores the classical stages as well as pre-REM sleep in mice. When restricted to the classical stages, the optimized network showed state-of-the-art classification performance with an out-of-sample F1 score of 0.95 in male C57BL/6J mice. When unrestricted, the network showed lower F1 scores on pre-REM (0.5) compared to the classical stages. The result is comparable to previous attempts to score transitional stages in other species such as transition sleep in rats or N1 sleep in humans. Nevertheless, we observed that the sequence of predictions including pre-REM typically transitioned from Non-REM to REM reflecting sleep dynamics observed by human scorers. Our findings provide further evidence for the difficulty of scoring transitional sleep stages, likely because such stages of sleep are under-represented in typical data sets or show large inter-scorer variability. We further provide our source code and an online platform to run predictions with our trained network. Y1 - 2021 U6 - http://dx.doi.org/10.1038/s41598-021-91286-0 SN - 2045-2322 N1 - Corresponding author: Stephan Bialonski VL - 11 IS - Art. 12245 PB - Springer Nature CY - London ER - TY - JOUR A1 - Gorzalka, Philip A1 - Schmiedt, Jacob Estevam A1 - Schorn, Christian T1 - Automated Generation of an Energy Simulation Model for an Existing Building from UAV Imagery JF - Buildings N2 - An approach to automatically generate a dynamic energy simulation model in Modelica for a single existing building is presented. It aims at collecting data about the status quo in the preparation of energy retrofits with low effort and costs. The proposed method starts from a polygon model of the outer building envelope obtained from photogrammetrically generated point clouds. The open-source tools TEASER and AixLib are used for data enrichment and model generation. A case study was conducted on a single-family house. The resulting model can accurately reproduce the internal air temperatures during synthetical heating up and cooling down. Modelled and measured whole building heat transfer coefficients (HTC) agree within a 12% range. A sensitivity analysis emphasises the importance of accurate window characterisations and justifies the use of a very simplified interior geometry. Uncertainties arising from the use of archetype U-values are estimated by comparing different typologies, with best- and worst-case estimates showing differences in pre-retrofit heat demand of about ±20% to the average; however, as the assumptions made are permitted by some national standards, the method is already close to practical applicability and opens up a path to quickly estimate possible financial and energy savings after refurbishment. KW - Modelica KW - heat transfer coefficient KW - heat demand KW - building energy modelling KW - building energy simulation Y1 - 2021 U6 - http://dx.doi.org/10.3390/buildings11090380 SN - 2075-5309 N1 - This article belongs to the Special Issue "Application of Computer Technology in Buildings" VL - 11 IS - 9 PB - MDPI CY - Basel ER - TY - JOUR A1 - Golland, Alexander T1 - Bußgelder wegen Datenschutzverstößen – Vermeidung und Verteidigung. Deutsche Aufsichtsbehörden setzen seit vergangenem Jahr zunehmend auf Sanktion JF - NWB Steuer- und Wirtschaftsrecht Y1 - 2021 SN - 0028-3460 VL - 36 SP - 2678 EP - 2687 PB - NWB-Verl. CY - Herne ER - TY - JOUR A1 - Golland, Alexander ED - Ewer, Wolfgang ED - Hamm, Rainer ED - Karpenstein, Ulrich ED - Oberthür, Nathalie ED - Herchen, Hilke ED - Bräutigam, Peter T1 - Das Telekommunikation-Telemedien-Datenschutzgesetz. Cookies und PIMS als Herausforderungen für Website-Betreiber JF - NJW Neue Juristische Wochenschrift Y1 - 2021 SN - 0341-1915 IS - 31 SP - 2238 EP - 2243 PB - Beck CY - München ER - TY - JOUR A1 - Golland, Alexander T1 - Anforderungen an Transfer Impact Assessments bei Datentransfers in unsichere Drittländer JF - DSB Datenschutz-Berater Y1 - 2021 SN - 0170-7256 VL - 45 IS - 7-8 SP - 229 EP - 231 PB - dfv Mediengruppe, Deutscher Fachverlag GmbH CY - Frankfurt am Main ER - TY - JOUR A1 - Golland, Alexander T1 - Neuregelungen zum Datenschutz: Ein Update für Website-Betreiber. Reform des Telekom-munikations- und Telemedienrechts verabschiedet JF - NWB Rechnungswesen - BBK Y1 - 2021 SN - 0340-9848 IS - 14 SP - 672 EP - 674 ER - TY - JOUR A1 - Golland, Alexander T1 - Cookies & Co. – trotz neuem Gesetz alte Probleme für Website-Betreiber. Anpassung des deutschen Rechts durch das TTDSG an unionsrechtliche Vorgaben zum 1.12.2021 JF - NWB Steuer- und Wirtschaftsrecht Y1 - 2021 SN - 0028-3460 VL - 2021 IS - 25 SP - 1818 EP - 1825 PB - NWB-Verlag CY - Basel ER - TY - JOUR A1 - Golland, Alexander T1 - Datenschutzkonforme Test-, Impf- und Genesungskontrollen in Betrieben der Privatwirtschaft JF - DSB Datenschutz-Berater Y1 - 2021 SN - 0170-7256 VL - 45 IS - 5 SP - 158 EP - 160 PB - dfv Mediengruppe, Deutscher Fachverlag GmbH CY - Frankfurt am Main ER - TY - JOUR A1 - Golland, Alexander T1 - Rezension zu: Voskamp, Kipker - Sozialdatenschutz in der Praxis (2021) JF - DSB Datenschutz-Berater Y1 - 2021 SN - 0170-7256 VL - 45 IS - 7-8 SP - 239 EP - 240 ER - TY - JOUR A1 - Golland, Alexander T1 - Rezension zu: Voigt – Die räumliche Anwendbarkeit der EU Datenschutz-Grundverordnung auf Auftragsverarbeiter im Drittland (2020) JF - DSB Datenschutz-Berater Y1 - 2021 SN - 0170-7256 VL - 45 IS - 2 SP - 64 ER - TY - THES A1 - Goetz, Miriam T1 - Der globale Haarmarkt: Gestaltung eines aufklärenden Mediums zum Thema Haar und Haarhandel N2 - Niemand kann der täglichen Erfahrung mit Haaren entfliehen. Ob es nun der eigene Blick in den Spiegel ist, die Begegnung mit anderen Menschen, oder die mit Testimonials gespeiste Werbung für diverse Haarprodukte. Haare gehören zum Alltag. Aber was steckt hinter dem Haar, wenn es denn einmal von uns und unserer Person getrennt wird und nur noch als körperloses Büschel erkennbar ist? Zum Beispiel in Form von Echthaarextensions. Wer bedient freiwillig und unfreiwillig durch die eigene Haarpracht die millionenschwere Echthaarindustrie? Wer profitiert von der haarigen Ware und wer sind die Käufer, die den globalen Handel vorantreiben? Das jährlich erscheinende Bookazine TRICHOTOMY geht diesen Fragestellungen auf den Grund. Investigative Artikel enthüllen die Produktion und Ökonomie der vorwiegend anonymisierten Echthaarindustrie und porträtieren die Menschen und Schicksale 'hinter den Haaren'. KW - Haare KW - Haarindustrie KW - Bookazine KW - Illustrationen KW - Ökonomie Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Givanoudi, Stella A1 - Cornelis, Peter A1 - Rasschaert, Geertrui A1 - Wackers, Gideon A1 - Iken, Heiko A1 - Rolka, David A1 - Yongabi, Derick A1 - Robbens, Johan A1 - Schöning, Michael Josef A1 - Heyndrickx, Marc A1 - Wagner, Patrick T1 - Selective Campylobacter detection and quantification in poultry: A sensor tool for detecting the cause of a common zoonosis at its source JF - Sensors and Actuators B: Chemical Y1 - 2021 U6 - http://dx.doi.org/10.1016/j.snb.2021.129484 SN - 0925-4005 IS - In Press, Journal Pre-proof SP - Article 129484 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Gier, Miriam T1 - Kleiner Kontinent: Ein neues Branding für die Tourismusmarke Sardinien N2 - Aufgrund von weltweit verhängten Reisebeschränkungen und der Angst vor Ansteckung mit Covid-19 entschieden sich viele Touristen, ihren Urlaub 2020 ausfallen zu lassen. Die weltweite Corona-Pandemie hat insbesondere die italienische Tourismusbranche schwer getroffen und die Übernachtungszahlen innerhalb kürzester Zeit zu einem erheblichen Einbruch gebracht – so auch auf der beliebten Mittelmeerinsel Sardinien. Um weiteren schwerwiegenden wirtschaftlichen Schäden frühestmöglich entgegenzuwirken, soll ein klar kommunizierendes Gestaltungskonzept, das in all seinen Facetten von Sardinien und dessen zahlreichen Vorzügen inspiriert ist, einen erfolgreichen Neustart nach der Corona-Krise für die Insel einleiten. Das neue Erscheinungsbild der Tourismusmarke basiert unter anderem grundlegend auf typografischen Gestaltungselementen wie der eigens entwickelten Corporate Font „Sardegna Hybrid“. KW - Sardinien KW - Tourismus KW - Marke KW - Corporate Design KW - Corona Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - German, Laura A1 - Mikucki, Jill A. A1 - Welch, Susan A. A1 - Welch, Kathleen A. A1 - Lutton, Anthony A1 - Dachwald, Bernd A1 - Kowalski, Julia A1 - Heinen, Dirk A1 - Feldmann, Marco A1 - Francke, Gero A1 - Espe, Clemens A1 - Lyons, W. Berry T1 - Validation of sampling antarctic subglacial hypersaline waters with an electrothermal ice melting probe (IceMole) for environmental analytical geochemistry JF - International Journal of Environmental Analytical Chemistry N2 - Geochemical characterisation of hypersaline waters is difficult as high concentrations of salts hinder the analysis of constituents at low concentrations, such as trace metals, and the collection of samples for trace metal analysis in natural waters can be easily contaminated. This is particularly the case if samples are collected by non-conventional techniques such as those required for aquatic subglacial environments. In this paper we present the first analysis of a subglacial brine from Taylor Valley, (~ 78°S), Antarctica for the trace metals: Ba, Co, Mo, Rb, Sr, V, and U. Samples were collected englacially using an electrothermal melting probe called the IceMole. This probe uses differential heating of a copper head as well as the probe’s sidewalls and an ice screw at the melting head to move through glacier ice. Detailed blanks, meltwater, and subglacial brine samples were collected to evaluate the impact of the IceMole and the borehole pump, the melting and collection process, filtration, and storage on the geochemistry of the samples collected by this device. Comparisons between melt water profiles through the glacier ice and blank analysis, with published studies on ice geochemistry, suggest the potential for minor contributions of some species Rb, As, Co, Mn, Ni, NH4+, and NO2−+NO3− from the IceMole. The ability to conduct detailed chemical analyses of subglacial fluids collected with melting probes is critical for the future exploration of the hundreds of deep subglacial lakes in Antarctica. Y1 - 2021 U6 - http://dx.doi.org/10.1080/03067319.2019.1704750 SN - 0306-7319 VL - 101 IS - 15 SP - 2654 EP - 2667 PB - Taylor & Francis CY - London ER - TY - JOUR A1 - Georg, Jörg Heiner A1 - Stollenwerk, Dominik A1 - Reinkensmeier, Sebastian A1 - Jungbluth, Christian T1 - „Smartes“ Laden an öffentlich zugänglichen Ladesäulen – Teil 1: Quo vadis, Marktdesign? JF - Energiewirtschaftliche Tagesfragen : et ; Zeitschrift für Energiewirtschaft, Recht, Technik und Umwelt Y1 - 2021 SN - 0720-6240 SN - 0013-743X VL - 71 IS - 1/2 SP - 64 EP - 69 PB - ETV Energieverlag CY - Essen ER - TY - JOUR A1 - Gaigall, Daniel T1 - Test for Changes in the Modeled Solvency Capital Requirement of an Internal Risk Model JF - ASTIN Bulletin N2 - In the context of the Solvency II directive, the operation of an internal risk model is a possible way for risk assessment and for the determination of the solvency capital requirement of an insurance company in the European Union. A Monte Carlo procedure is customary to generate a model output. To be compliant with the directive, validation of the internal risk model is conducted on the basis of the model output. For this purpose, we suggest a new test for checking whether there is a significant change in the modeled solvency capital requirement. Asymptotic properties of the test statistic are investigated and a bootstrap approximation is justified. A simulation study investigates the performance of the test in the finite sample case and confirms the theoretical results. The internal risk model and the application of the test is illustrated in a simplified example. The method has more general usage for inference of a broad class of law-invariant and coherent risk measures on the basis of a paired sample. KW - Bootstrap KW - Empirical process KW - Functional Delta Method KW - Hadamard differentiability KW - Paired sample Y1 - 2021 U6 - http://dx.doi.org/10.1017/asb.2021.20 SN - 1783-1350 VL - 51 IS - 3 SP - 813 EP - 837 PB - Cambridge Univ. Press CY - Cambridge ER - TY - CHAP A1 - Funke, Harald A1 - Beckmann, Nils A1 - Keinz, Jan A1 - Horikawa, Atsushi T1 - 30 years of dry low NOx micromix combustor research for hydrogen-rich fuels: an overview of past and present activities T2 - Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online. Vol.: 4B: Combustion, Fuels, and Emissions KW - Micromix KW - Hydrogen KW - Fuel-flexibility KW - NOx KW - Emissions Y1 - 2021 SN - 978-0-7918-8413-3 U6 - http://dx.doi.org/10.1115/GT2020-16328 N1 - Paper No. GT2020-16328, V04BT04A069 PB - American Society of Mechanical Engineers (ASME) ER - TY - THES A1 - Funger, Marvin T1 - Historie kinetischer Typografie: zeitliche Abbildung der Entstehung und Veränderung kinetischer Typografie N2 - Die heutige, vielfältige kinetische Typografie hat eine lange Entwicklung durchgemacht. Die Darstellung dieser in einer zeitlichen Reihenfolge vermittelt ein Verständnis über Ursprung und Evolution. Die Publikation stellt die historische, analoge sowie die moderne, digitale Entwicklung dar. Dabei wird die Verbindung und der Einfluss der damaligen Gestaltung in der heutigen Umsetzung beleuchtet. Die Plakatreihe erklärt drei Anwendungsmöglichkeiten der kinetischen Typografie. Hierbei werden teils reale Objekte nachgestellt, um die Wiedererkennung dieser im Alltag zu fördern. Gemeinsam zeigen die Plakate und die Publikation ein breites Spektrum der kinetischen Typografie und fördern das Verständnis dieser digitalen Umsetzung von Schrift in bewegter Form. KW - Bewegung KW - Typografie KW - Kinetik KW - Digitalisierung KW - Abbildungen Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Friede, Celine T1 - Herbothecary: Eine App für den eigenen Apothekergarten N2 - „Gegen jedes Leiden ist ein Kraut gewachsen“ lautet eine alte Volksweisheit. Doch auch heute, in einer Zeit, in der wir Verantwortung in unserer eigenen Gesundheit übernehmen möchten, wächst das Interesse an Pflanzenheilkunde stetig. Das Projekt „Herbothecary“ schafft einen einfachen Zugang zur Welt der Heilpflanzen. Dies geschieht mithilfe einer App, die als Auswahlhilfe für Samen dient und alle nötigen Informationen zur Heilwirkung und Identifikation der Pflanze bietet. Auch prozessbegleitende Anleitungen finden die Nutzenden hier. Um das Packaging-Design der Samen besonders nachhaltig zu gestalten, besteht dieses aus Samenpapier. Die Samenpäckchen können nach der Nutzung also einfach eingepflanzt werden, anstatt diese wegzuwerfen, wodurch unnötiger Verpackungsmüll vermieden wird. „Herbothecary“ dient als Grundlage für den Anbau deines eigenen Apothekergartens. KW - App Design KW - Pflanzen KW - Heilpflanzen KW - Botanik KW - Gesundheit Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Franken, Florian T1 - Zeitfenster: Eine Dorfgeschichte aus Bildcollagen N2 - Die Zeit befindet sich im ständigen Wandel. Mit ihr verbindet man Zukunft, Vergangenheit und Gegenwart. Letzteres prägt das jetzige Dasein. Der Zeitwandel ist ein Prozess, über den wir uns meist erst nach Jahren bewusstwerden. Besonders, wenn man das Dorf, in welchem man aufgewachsen ist, näher betrachtet, fällt einem auf, was sich im Laufe der Jahre architektonisch oder infrastrukturell verändert hat. So stellt sich die Frage, wie das Dorf im letzten Jahrhundert ausgesehen hat. Wie sah es vor, während und nach den beiden Weltkriegen aus? Wie war das Dorfleben in der Zwischenkriegszeit? Was hat sich im letzten Jahrhundert verändert? Diese Arbeit zeigt den Wandel der Zeit, kombiniert aus Vergangenheit und Gegenwart. Damalige Aufnahmeorte wurden erneut aufgesucht, die Fotos aus der gleichen Position wurden neu abgelichtet und miteinander kombiniert. KW - Vergangenheit KW - Zeitwandel KW - Dorfleben KW - Collagen KW - 20. Jahrhundert Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Flohr, Katharina Sophie T1 - Real:ly?: Perspektiven & soziokulturelle Unterschiede in der Berichterstattung N2 - Wie real ist unsere Realität? Wie »wirklich« ist das, was wir wahrnehmen und wie »wahr« kann die »Wahrheit« eigentlich sein? Medial vermittelte Informationen spielen für den Prozess der Meinungsbildung eine entscheidende Rolle. In der Wanderausstellung real:ly? geht es um einen Perspektivwechsel. Am Beispiel der »Atomwaffentests auf den Marshallinseln« wird das medial erzeugte Bild amerikanischer Berichterstattung persönlichen Geschichten der Marshaller*innen gegenübergestellt: Technologischer Fortschritt, das Wettrüsten mit der UdSSR und die Macht über die Atombombe treffen auf Erzählungen über Zwangsumsiedlung, Krankheit, Ausbeutung und Abhängigkeit. real:ly? soll daran erinnern, die andere Seite der Medaille zu bedenken und eine andere Perspektive einzunehmen, bevor man seine Meinung bildet. Denn alles, was wir zu wissen glauben, ist nur ein kleiner Teil der ganzen Geschichte. KW - Atomwaffentests KW - Marshallinseln KW - nukleares Erbe KW - Klimawandel KW - Berichterstattung Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Fissabre, Anke T1 - Ein pazifistisches Kriegerdenkmal der Moderne. Das Totenkreuz von Rudolf Schwarz JF - In situ: Zeitschrift für Architekturgeschichte Y1 - 2021 SN - 1866-959X N1 - gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 13 Z 959 vorhanden IS - 1 SP - 127 EP - 138 PB - Wernersche Verlagsgesellschaft CY - Worms ER - TY - JOUR A1 - Finkenberger, Isabel Maria T1 - Wohnen als Produktionsgemeinschaftsaufgabe JF - Jahrbuch für Christliche Sozialwissenschaften N2 - Wohnen als neue soziale Frage ist mehr als die Produktion neuer Formen von Wohnen und deren architektonischer Gestalt, und auch mehr als nur die Umsetzung sich verändernder, jedoch individuell formulierter Wohnwünsche. Sie spannt sich auf zwischen gesellschafts- und nachhaltigkeitspolitischen, hardcore-kapitalistischen und globalen Rahmenbedingungen, Hardware und Software, Individuum und Gemeinwohl, Konsum und Mitgestaltung. Entscheidend sind die Akteure und die Art und Weise, wie und nach welchen Maßstäben sie handeln. Entscheidend ist aber auch, Wohnen sowohl kontextuell wie auch programmatisch neu zu denken und dadurch zu neuen Mischungen, Nachbarschaften und Bewertungskriterien einer Projekt- und Stadtentwicklung zu kommen, die mehr als die Summe seiner Einzelteile wollen – ein gutes Leben für Alle abseits der Frage des Geldbeutels und der sozialen Zugehörigkeit. Y1 - 2024 U6 - http://dx.doi.org/10.17879/jcsw-2021-3537 SN - 0075-2584 IS - 62 SP - 31 EP - 42 PB - Aschendorff CY - Münster ER - TY - CHAP A1 - Fiedler, Gerda A1 - Gottschlich-Müller, Birgit A1 - Melcher, Karin ED - Liu-Henke, Xiaobo ED - Durak, Umut T1 - Online-Prüfungen mit STACK Aufgaben T2 - Tagungsband ASIM Workshop STS/GMMS/EDU 2021 N2 - Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere für eine Open-Book Online Prüfung geeignet, da eine faire Prüfungssituation gewährleistet werden kann. Y1 - 2021 SN - 978-3-901608-69-8 U6 - http://dx.doi.org/10.11128/arep.45 N1 - Virtueller Workshop, ASIM STS/GMMS & EDU 2021, 11.-12. März 2021 PB - ARGESIM Verlag CY - Wien ER - TY - BOOK A1 - Feuerriegel, Uwe T1 - Wärmeübertragung mit EXCEL und VBA: Wärmetechnische Berechnungen und Simulationen effektiv durchführen und professionell dokumentieren N2 - Dieses Lehrbuch vermittelt die Grundlagen der Wärmeübertragung sowie den Umgang mit EXCEL-VBA von der Erstellung von Makros bis zu benutzerdefinierten Funktionen. Es legt damit eine Basis für die schnelle und professionelle Durchführung von Berechnungen und Simulationen. Die angeleitete Erstellung von Berechnungsmodulen mit EXCEL und VBA aus allen wichtigen Bereichen der Wärmeübertragung bildet den inhaltlichen Schwerpunkt. Dazu zählen die stationäre Wärmeleitung und der stationäre Wärmedurchgang, die instationäre Wärmeleitung, der Wärmeübergang bei freier und erzwungener Konvektion sowie die Wärmestrahlung und der Wärmeübergang beim Kondensieren und Sieden. Soweit sinnvoll und möglich werden die Stoffwertekorrelationen und die Berechnungsvorschriften aus dem VDI-Wärmeatlas verwendet. Für ausgewählte Anwendungen werden zudem komplexere Auslegungen und Simulationen von Prozessen der Wärmeübertragung sowie von Wärmeübertragern erstellt. Die Zielgruppen: Studierende in Bachelor- und Masterstudiengängen, Praktiker im Engineering KW - Wärmeübertragung KW - Energietechnik KW - Excel und VBA KW - VDI-Wärmeatlas KW - Wärmeübertrager Y1 - 2021 SN - 978-3-658-35905-8 U6 - http://dx.doi.org/10.1007/978-3-658-35906-5 N1 - In der Bereichsbibliothek Eupener Straße unter der Signatur 21 WDW 39 vorhanden PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Ferrein, Alexander A1 - Meeßen, Marcus A1 - Limpert, Nicolas A1 - Schiffer, Stefan ED - Lepuschitz, Wilfried T1 - Compiling ROS Schooling Curricula via Contentual Taxonomies T2 - Robotics in Education Y1 - 2021 SN - 978-3-030-67411-3 U6 - http://dx.doi.org/10.1007/978-3-030-67411-3_5 N1 - RiE: International Conference on Robotics in Education (RiE); Advances in Intelligent Systems and Computing book series (AISC, volume 1316) SP - 49 EP - 60 PB - Springer CY - Cham ER - TY - JOUR A1 - Fagan, Andrew J. A1 - Bitz, Andreas A1 - Björkman-Burtscher, Isabella M. A1 - Collins, Christopher M. A1 - Kimbrell, Vera A1 - Raaijmakers, Alexander J. E. T1 - 7T MR Safety JF - Journal of Magnetic Resonance Imaging (JMRI) Y1 - 2021 U6 - http://dx.doi.org/10.1002/jmri.27319 SN - 1522-2586 VL - 53 IS - 2 SP - 333 EP - 346 PB - Wiley CY - Weinheim ER - TY - THES A1 - Eschbach, Lara T1 - ESPACE – ESCAPE N2 - Die Arbeit „ESPACE-ESCAPE“ befasst sich mit der Frage, was entstehen kann, wenn man sich bewusst auf das einlässt, was ist, und welche ungeahnten Räume sich eröffnen, wenn dieser Zustand erst einmal akzeptiert und somit erkundet werden kann. Die Fotografien erzählen in ihrem Zusammenspiel von einer Suche, von Niedergeschlagenheit und dem Gefühl nicht von der Stelle zu kommen. Davon, sich im Kreis zu bewegen. Von vorbeiziehenden Tagen, Wochen und Monaten. Dem Wechsel zwischen Licht und Dunkelheit, deren Grenzen sich auflösen und ineinander übergehen. Dem Wunsch danach, es der Natur gleichzutun und in einen Schlaf zu fallen. Nur für eine kurze lange Weile dem Winter entgehen. So eine Art Winterschlaf eben. Die Fotografien bündeln dieses kollektive Gefühl als melancholische Sicht auf den unendlich erscheinenden Winter und dennoch: Zwischen den Zeilen liegen eine verborgene Schönheit, Hoffnung und Neuanfang. KW - Fotografie KW - Winter KW - Depression KW - Traum KW - Schlaf Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Erpicum, Sebastien A1 - Crookston, Brian M. A1 - Bombardelli, Fabian A1 - Bung, Daniel B. A1 - Felder, Stefan A1 - Mulligan, Sean A1 - Oertel, Mario A1 - Palermo, Michele T1 - Hydraulic structures engineering: An evolving science in a changing world JF - Wires Water Y1 - 2021 U6 - http://dx.doi.org/10.1002/wat2.1505 SN - 2049-1948 VL - 8 IS - 2 PB - Wiley CY - Weinheim ER - TY - THES A1 - Ernst, Loredana T1 - Let´s change fashion!: Eine Image-Kampagne der Fair Wear Foundation für faire und nachhaltige Mode. N2 - Fast Fashion-Ketten beherrschen die Modewelt. Doch einige Unternehmen, Siegel und Stiftungen versuchen die Textilindustrie neu umzugestalten. Um die Modeindustrie nachhaltig zu verändern, müssen allerdings auch den Kunden die schlechten Arbeitsbedingungen und die negativen Einflüsse der Textilbranche auf die Umwelt bewusst werden. Das konkrete Ziel der erstellten Kampagne ist es, modebewusste Menschen davon zu überzeugen Fast Fashion hinter sich zu lassen. Es soll also ein Umdenken bei den Konsumenten stattfinden. Die Fair Wear Foundation und ihre Mitglieder vertreten die Vision, dass Mode auch fair und nachhaltig sein kann. Genau diese Vision soll mit der Kampagne vermittelt und an die Konsumenten weitergetragen werden. KW - Kampagne KW - Konzept KW - Layout KW - Mode KW - fair Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Englhard, Markus A1 - Weber, Tobias A1 - Arent, Jan-Christoph T1 - Efficiency enhancement for CFRP-Prepregautoclave manufacturing by means of simulation-assisted loading optimization T2 - Proceedings of SAMPE Europe Conference 2021 N2 - A new method for improved autoclave loading within the restrictive framework of helicopter manufacturing is proposed. It is derived from experimental and numerical studies of the curing process and aims at optimizing tooling positions in the autoclave for fast and homogeneous heat-up. The mold positioning is based on two sets of information. The thermal properties of the molds, which can be determined via semi-empirical thermal simulation. The second information is a previously determined distribution of heat transfer coefficients inside the autoclave. Finally, an experimental proof of concept is performed to show a cycle time reduction of up to 31% using the proposed methodology. Y1 - 2021 ER - TY - JOUR A1 - Engemann, Heiko A1 - Cönen, Patrick A1 - Dawar, Harshal A1 - Du, Shengzhi A1 - Kallweit, Stephan T1 - A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator JF - Applied Sciences N2 - Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human–robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form. KW - mobile manipulation KW - large-scale inspection KW - wind turbine production KW - autonomous navigation KW - surface-orthogonal path planning Y1 - 2021 U6 - http://dx.doi.org/10.3390/app11199271 SN - 2076-3417 N1 - Belongs to the Special Issue "Advances in Industrial Robotics and Intelligent Systems" VL - 11 IS - 19 SP - 1 EP - 22 PB - MDPI CY - Basel ER - TY - CHAP A1 - Engelmann, Ulrich M. A1 - Shasha, Carolyn A1 - Slabu, Ioana T1 - Magnetic nanoparticle relaxation in biomedical application: focus on simulating nanoparticle heating T2 - Magnetic nanoparticles in human health and medicine Y1 - 2021 SN - 978-1-119-75467-1 SP - 327 EP - 354 PB - Wiley-Blackwell CY - Hoboken, New Jeersey ER - TY - JOUR A1 - Engelmann, Ulrich M. A1 - Shalaby, Ahmed A1 - Shasha, Carolyn A1 - Krishnan, Kannan M. A1 - Krause, Hans-Joachim T1 - Comparative modeling of frequency mixing measurements of magnetic nanoparticles using micromagnetic simulations and Langevin theory JF - Nanomaterials N2 - Dual frequency magnetic excitation of magnetic nanoparticles (MNP) enables enhanced biosensing applications. This was studied from an experimental and theoretical perspective: nonlinear sum-frequency components of MNP exposed to dual-frequency magnetic excitation were measured as a function of static magnetic offset field. The Langevin model in thermodynamic equilibrium was fitted to the experimental data to derive parameters of the lognormal core size distribution. These parameters were subsequently used as inputs for micromagnetic Monte-Carlo (MC)-simulations. From the hysteresis loops obtained from MC-simulations, sum-frequency components were numerically demodulated and compared with both experiment and Langevin model predictions. From the latter, we derived that approximately 90% of the frequency mixing magnetic response signal is generated by the largest 10% of MNP. We therefore suggest that small particles do not contribute to the frequency mixing signal, which is supported by MC-simulation results. Both theoretical approaches describe the experimental signal shapes well, but with notable differences between experiment and micromagnetic simulations. These deviations could result from Brownian relaxations which are, albeit experimentally inhibited, included in MC-simulation, or (yet unconsidered) cluster-effects of MNP, or inaccurately derived input for MC-simulations, because the largest particles dominate the experimental signal but concurrently do not fulfill the precondition of thermodynamic equilibrium required by Langevin theory. KW - Magnetic nanoparticles KW - Frequency mixing magnetic detection KW - Langevin theory KW - Micromagnetic simulation KW - Nonequilibrium dynamics Y1 - 2021 SN - 2079-4991 U6 - http://dx.doi.org/10.3390/nano11051257 N1 - This article belongs to the Special Issue Applications and Properties of Magnetic Nanoparticles VL - 11 IS - 5 SP - 1 EP - 16 PB - MDPI CY - Basel ER - TY - JOUR A1 - El-Deib, Khaled A1 - Butenweg, Christoph A1 - Klinkel, Sven ED - Jesse, Dirk T1 - Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erhöhten Verhaltensbeiwerten JF - Mauerwerk N2 - Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten führt dazu, dass bereits heute Standsicherheitsnachweise für Gebäude mit üblichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr geführt werden können. Diese Problematik wird sich in Deutschland mit der Einführung kontinuierlicher probabilistischer Erdbebenkarten weiter verschärfen. Aufgrund der Erhöhung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht berücksichtigten Tragfähigkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verfügbar zu machen. Der vorliegende Beitrag stellt ein Konzept für die gebäudespezifische Ermittlung von erhöhten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsfähigkeit und Energiedissipation sowie die Überfestigkeiten berücksichtigt werden. Für die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von Wänden und Geschossdecken durch einen Einspanngrad beschrieben werden. Für die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingeführt, mit dem die Interaktion von Wänden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erhöhten gebäudespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erhöhten Verhaltensbeiwerten für dieses Gebäude liegen deutlich näher an den Ergebnissen nichtlinearer Nachweise und somit bleiben übliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenansätzen nachweisbar. N2 - Seismic verification of masonry buildings based on realistic calculation models and increased behavior factorsWith the application of the traditional linear verification con­cept to masonry structures it is already no longer possible to carry out structural safety verifications even for buildings with standard ground plan configurations in areas with moderate seismicity. This problem will be exacerbated in Germany with the introduction of continuous probabilistic earthquake maps. Due to the increased seismic actions, it is necessary to make the existing load­bearing capacity reserves that have not yet been taken into account available in comprehensible verifica­tion concepts in construction practice. This article presents a concept for the building­specific determination of increased behavior factors. The behavior factors are composed of three components, which take into account the load redistribution in ground plans, the deformation capability and energy dissipation and all kinds of overstrength effects. For the calculation of these three components, a non­linear verification concept based on pushover analyses is applied, in which the interac­tions of walls and floor slabs are described by a level of re­straint. A non­linear modeling approach of the overall building is introduced for the determination of the restraint levels, with which the interaction of walls and floor slabs can be simulated. The results of the linear verifications with increased behavior factors for this building are significantly closer to the results of non­linear verifications and thus the standard ground plan con­figurations in areas with moderate seismicity can still be veri­fied with the traditional linear calculation approaches. KW - Mauerwerksbauten KW - Erdbebeneinwirkung KW - Bemessung KW - Verhaltensbeiwerte KW - Pushover­Analysen Y1 - 2021 U6 - http://dx.doi.org/10.1002/dama.202110014 SN - 1437-1022 SN - 1432-3427 VL - 2021 IS - 3 SP - 110 EP - 119 PB - Wiley CY - Weinheim ER - TY - CHAP A1 - El Moussaoui, Noureddine A1 - Kassmi, Khalil A1 - Alexopoulos, Spiros A1 - Schwarzer, Klemens A1 - Chayeb, Hamid A1 - Bachiri, Najib T1 - Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy T2 - Materialstoday: Proceedings Y1 - 2021 U6 - http://dx.doi.org/10.1016/j.matpr.2021.03.115 SN - 2214-7853 ER - TY - THES A1 - Dreßen, Samira T1 - Teach and Learn-Platform: eine Applikation für Bildungseinrichtungen, Schüler und Studenten N2 - Die Applikation „Slot“ ist eine lehrbegleitende Kommunikations- und Kooperationsplattform, die eine zeitgemäße Lehre, Studienorganisation und Präsentation zulässt. Slot dient dabei nicht nur als Hilfestellung für Lehrende und Lernende, sondern ermöglicht auch die vollständige Durchführung von effizientem Unterricht. Den Lernenden soll maximale Kontrolle zur Erarbeitung ihres Wissens und Übersichtlichkeit in der Kommunikation geboten werden. Um für die unterschiedlichen Nutzergruppen ein benutzerfreundliches System zu schaffen, steht eine breitgefächerte Funktionsauswahl zur Verfügung: Videochat, Messenger, VR-Raum, Whiteboard, Aufgabenübersicht, Datenabgabe, Kalender, Profil und ToDo-List. Die Nutzungsmöglichkeiten können individuell auf die unterschiedlichen Nutzergruppen und deren entsprechenden Bedürfnissen angepasst werden. KW - Online Lehre KW - E-Learning KW - UI/UX Design KW - Digitale Kommunikation KW - Blended Learning Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - RPRT A1 - Drescher, Hans Paul T1 - Turbulence - minimum dissipation and maximum macroscopic momentum exchange N2 - The minimum dissipation requirement of the thermodynamics of irreversible processes is applied to characterize the existence of laminar and non-laminar, and the co-existence of laminar and turbulent flow zones. Local limitations of the different zones and three different forms of transition are defined. For the Couette flow a non-local “corpuscular” flow mechanism explains the logarithmic law-of-the-wall, maximum turbulent dimensions and a value x=0,415 for the v. Kármán constant. Limitations of the logarithmic law near the wall and in the centre of the experiment are interpreted. Y1 - 2021 ER - TY - THES A1 - Drees, Niklas T1 - Retrieval: Ein experimenteller Film über Erinnerungen und wie sie uns definieren N2 - Welchen Einfluss haben Erinnerungen auf unser Bewusstsein und wie definieren sie uns als Individuum? Erinnerungen gehen verloren — sei es durch einfaches Vergessen, traumatische Erlebnisse oder Krankheit. Aber wie sehr wirkt sich das Vergessen auf unsere Persönlichkeit aus? Wenn wichtige Erlebnisse aus unserer Erinnerung verschwinden, bleiben wir dann noch wir selbst? Für die gestalterische Auseinandersetzung mit diesen Fragen wurde das Medium Film gewählt. Der Film führt uns auf eine Reise durch die Erinnerungs- und Gedankenwelt einer Person, die ihre Erinnerung verloren hat. Mit der Hilfe des Psychologen Dr. Daniel Rose soll ein Memory-Backup durchgeführt werden, um die verlorenen Erinnerungen wiederherzustellen. Dabei sollen ihre Erinnerungen neu aufgesetzt werden, um ihr altes Bewusstsein zurückzugewinnen. Stück für Stück werden die verlorenen Erinnerungen in verschiedenen Bewusstseinsphasen zusammengesetzt und mit ihnen löst sich das Rätsel ihres Verschwindens. KW - Retrieval KW - Kurzfilm KW - experimentell KW - Erinnerungen KW - Bewusstsein Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Dohmen, Sophie T1 - Einmal Gezheim und zurück!: Ein interaktives Point-and-Click-Adventure mit zugehörigem Printprodukt für Kinder von 10 bis 14 Jahren N2 - Damit sich Kinder in einer zunehmend digitalisierten Welt zurechtfinden können, ist die Schulung von Medienkompetenz unerlässlich. Als Digital-Analog-Hybrid-Game ermöglicht „Einmal Gezheim und zurück“ die spielerische Auseinandersetzung mit verschiedenen Informationsquellen. Zum Lösen der integrierten Rätsel ist der Einsatz der beiliegenden Print-Komponenten erforderlich, sodass die Spielenden automatisch Bildschirmpausen einlegen, um sich mit einem analogen Recherche-Medium zu beschäftigen. Die Handlung wurde speziell für das Projekt konzipiert: Im Zentrum der Mystery-Erzählung stehen die 13-jährige Britta und ihr Nachbar Herr Erdmann, der 1973 spurlos verschwindet. Mithilfe der Notizen des Verschollenen, die im gedruckten Teil des Spiels zu finden sind, lösen die Spielenden in einem spannenden Point-and-Click-Adventure das Rätsel um die fiktive Stadt Gezheim, schwarze Löcher und ein vergessenes Alienvolk... KW - Gamedesign KW - Kinderbuch KW - Interaktiv KW - point-and-click KW - Analog-Digital-Hybrid Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Dikta, Gerhard A1 - Scheer, Marsel T1 - Bootstrap Methods: With Applications in R N2 - This book provides a compact introduction to the bootstrap method. In addition to classical results on point estimation and test theory, multivariate linear regression models and generalized linear models are covered in detail. Special attention is given to the use of bootstrap procedures to perform goodness-of-fit tests to validate model or distributional assumptions. In some cases, new methods are presented here for the first time. The text is motivated by practical examples and the implementations of the corresponding algorithms are always given directly in R in a comprehensible form. Overall, R is given great importance throughout. Each chapter includes a section of exercises and, for the more mathematically inclined readers, concludes with rigorous proofs. The intended audience is graduate students who already have a prior knowledge of probability theory and mathematical statistics. Y1 - 2021 SN - 978-3-030-73480-0 U6 - http://dx.doi.org/10.1007/978-3-030-73480-0 PB - Springer CY - Cham ER - TY - THES A1 - Dieter, Helen T1 - Koji - Entwicklung eines höhenverstellbaren Tisches zur Nutzung in Wohn- und Essräumen N2 - Um den immer komplexer werdenden Ansprüchen an Wohnraum gerecht zu werden, braucht es Möbel, die vielseitig und anpassbar sind. Koji ist ein Tisch, dessen Tischplatte unkompliziert in der Höhe verstellt werden und so in diversen Wohnsituationen eingesetzt werden kann. Er kann als Esstisch genauso genutzt werden wie als Beistell- oder Couchtisch. Durch die Mechanik, die die Höhenverstellbarkeit ermöglicht, bekommt der Tisch einen verspielten, beinahe lebendigen Charakter, der zur Interaktion einlädt. Er ist mehr als ein stummer Begleiter des Alltags, sondern vielmehr Inspiration, seine Umgebung aktiv zu gestalten, um sie so für sich optimal einzurichten. KW - Möbeldesign KW - Konzeptdesign KW - Tisch KW - Höhenverstellbar KW - Holz Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Diekmann, Julian A1 - Eggert, Mathias T1 - Is a Progressive Web App an Alternative for Native App Development? T2 - 3. Wissenschaftsforum: Digitale Transformation (WiFo21) (Lecture Notes in Informatics ; P-319) N2 - The existence of several mobile operating systems, such as Android and iOS, is a challenge for developers because the individual platforms are not compatible with each other and require separate app developments. For this reason, cross-platform approaches have become popular but lack in cloning the native behavior of the different operating systems. Out of the plenty cross-platform approaches, the progressive web app (PWA) approach is perceived as promising but needs further investigation. Therefore, the paper at hand aims at investigating whether PWAs are a suitable alternative for native apps by developing a PWA clone of an existing app. Two surveys are conducted in which potential users test and evaluate the PWA prototype with regard to its usability. The survey results indicate that PWAs have great potential, but cannot be treated as a general alternative to native apps. For guiding developers when and how to use PWAs, four design guidelines for the development of PWA-based apps are derived based on the results. KW - Progressive Web App KW - PWA KW - Cross-platform KW - Evaluation KW - Mobile web Y1 - 2021 SN - 978-3-88579-713-5 SP - 35 EP - 48 PB - Gesellschaft für Informatik CY - Darmstadt ER - TY - JOUR A1 - Dickhoff, Jens A1 - Horikawa, Atsushi A1 - Funke, Harald T1 - Hydrogen Combustion - new DLE Combustor Addresses NOx Emissions and Flashback JF - Turbomachinery international : the global journal of energy equipment Y1 - 2021 SN - 2767-2328 SN - 0149-4147 VL - 62 IS - 4 SP - 26 EP - 27 PB - MJH Life Sciences CY - Cranbury ER - TY - CHAP A1 - Dey, Thomas A1 - Elsen, Ingo A1 - Ferrein, Alexander A1 - Frauenrath, Tobias A1 - Reke, Michael A1 - Schiffer, Stefan ED - Makedon, Fillia T1 - CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom T2 - PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference N2 - In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway. KW - embedded hardware KW - sensor networks KW - information systems KW - education KW - do-it-yourself Y1 - 2021 SN - 9781450387927 U6 - http://dx.doi.org/10.1145/3453892.3462697 N1 - PETRA '21: The 14th PErvasive Technologies Related to Assistive Environments Conference Corfu Greece 29 June 2021- 2 July 2021 SP - 292 EP - 299 PB - Association for Computing Machinery CY - New York ER - TY - THES A1 - Devjatko, Elli T1 - Hyphan - ein modulares Sitzsystem mit intelligenten Materialien N2 - Hyphan ist ein modulares System, welches sich aus diversen Grundelementen aufbaut. Die Möglichkeiten des Aufbaus sind vielseitig und Umfangreich. Achsiale- sowie lineare Erweiterung sorgen für ein Modul Umfang, der zahlreiche Fläche erschaffen kann. So kann Länge und Tiefe eines Objekts umfangreich sowie vielfältig gestaltet werden. Hyphan wendet sich an die Bedürfnisse der Neuen Generationen, versucht flexibel in seiner Form zu sein und zuverlässig, langlebig und qualitativ in seinem Material. Durch die Diskussion über die neuen Formen der Mobilität und dem Nachhaltigkeitsaspekt sehe ich in der Gestaltung von urbanen Knotenpunkten und ihren Interior sehr großes Potenzial für Hyphan. KW - Hyphan KW - Flughafen KW - Bahnhof KW - Lobby KW - antivirale Eigenschaften Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Czarnecki, Christian A1 - Hong, Chin-Gi A1 - Schmitz, Manfred A1 - Dietze, Christian ED - Urbach, Nils ED - Röglinger, Maximilian ED - Kautz, Karlheinz ED - Alias, Rose Alinda ED - Saunders, Carol ED - Wiener, Martin T1 - Enabling digital transformation through cognitive robotic process automation at Deutsche Telekom Services Europe T2 - Digitalization Cases Vol. 2 : Mastering digital transformation for global business N2 - Subject of this case is Deutsche Telekom Services Europe (DTSE), a service center for administrative processes. Due to the high volume of repetitive tasks (e.g., 100k manual uploads of offer documents into SAP per year), automation was identified as an important strategic target with a high management attention and commitment. DTSE has to work with various backend application systems without any possibility to change those systems. Furthermore, the complexity of administrative processes differed. When it comes to the transfer of unstructured data (e.g., offer documents) to structured data (e.g., MS Excel files), further cognitive technologies were needed. Y1 - 2021 SN - 978-3-030-80002-4 (Print) SN - 978-3-030-80003-1 (Online) U6 - http://dx.doi.org/10.1007/978-3-030-80003-1 SP - 123 EP - 138 PB - Springer CY - Cham ER - TY - CHAP A1 - Czarnecki, Christian A1 - Fettke, Peter ED - Czarnecki, Christian ED - Fettke, Peter T1 - Robotic process automation : Positioning, structuring, and framing the work T2 - Robotic process automation : Management, technology, applications N2 - Robotic process automation (RPA) has attracted increasing attention in research and practice. This chapter positions, structures, and frames the topic as an introduction to this book. RPA is understood as a broad concept that comprises a variety of concrete solutions. From a management perspective RPA offers an innovative approach for realizing automation potentials, whereas from a technical perspective the implementation based on software products and the impact of artificial intelligence (AI) and machine learning (ML) are relevant. RPA is industry-independent and can be used, for example, in finance, telecommunications, and the public sector. With respect to RPA this chapter discusses definitions, related approaches, a structuring framework, a research framework, and an inside as well as outside architectural view. Furthermore, it provides an overview of the book combined with short summaries of each chapter. KW - Robotic process automation KW - management KW - technology KW - applications KW - research framework Y1 - 2021 SN - 978-3-11-067668-6 (Print) SN - 978-3-11-067669-3 (PDF) SN - 978-3-11-067677-8 (ePub) U6 - http://dx.doi.org/10.1515/9783110676693-202 SP - 3 EP - 24 PB - De Gruyter CY - Oldenbourg ER - TY - CHAP A1 - Croon, Philipp A1 - Czarnecki, Christian ED - Czarnecki, Christian ED - Fettke, Peter T1 - Liability for loss or damages caused by RPA T2 - Robotic process automation : Management, technology, applications N2 - Intelligent autonomous software robots replacing human activities and performing administrative processes are reality in today’s corporate world. This includes, for example, decisions about invoice payments, identification of customers for a marketing campaign, and answering customer complaints. What happens if such a software robot causes a damage? Due to the complete absence of human activities, the question is not trivial. It could even happen that no one is liable for a damage towards a third party, which could create an uncalculatable legal risk for business partners. Furthermore, the implementation and operation of those software robots involves various stakeholders, which result in the unsolvable endeavor of identifying the originator of a damage. Overall it is advisable to all involved parties to carefully consider the legal situation. This chapter discusses the liability of software robots from an interdisciplinary perspective. Based on different technical scenarios the legal aspects of liability are discussed. KW - robotic process automation KW - artificial intelligence KW - liability KW - culpability Y1 - 2021 SN - 9783110676778 SN - 9783110676693 SN - 9783110676686 U6 - http://dx.doi.org/10.1515/9783110676693-202 SP - 135 EP - 151 PB - De Gruyter CY - Oldenbourg ER - TY - THES A1 - Cremer, Lara T1 - Grenzgänger: Japan in Deutschland N2 - Durch die enorme geografische und kulturelle Entfernung zwischen Deutschland und Japan entstehen zwischen den beiden Kulturen immer wieder Vorurteile und Missverständnisse. Diese wurzeln oft in gegenseitiger Kontaktscheue, welche wiederum aus Ängsten entsteht, sich dem Gegenüber nicht angemessen genug verhalten zu können, und behindern so an einem authentischen Austausch. Das medienübergreifende Nachschlagewerk „Grenzgänger“ berichtet über verschiedenste Schnittstellen zwischen Deutschland und Japan, die den Austausch und die Zusammenarbeit der beiden Länder vorantreiben. Kern dabei ist es, zu zeigen, wie zwei sehr unterschiedliche Kulturen sich doch bei genauerem Hinsehen gleichen und sowohl aus Gemeinsamkeiten als auch Unterschieden lernen und gemeinsam wachsen kann. Es soll Berührungsängste auflösen und die Rezipierenden inspirieren, offener dem vermeintlich Fremden gegenüberzutreten.  KW - Kulturaustausch KW - Japan KW - Fotografie KW - Kalligrafie KW - Fadenheftung Y1 - 2021 PB - FH Aachen CY - Aachen ER -