TY  - JOUR
A1  - Staat, Manfred
A1  - Vu, Duc-Khoi
T1  - An Algorithm for Shakedown Analysis for Materials with Temperature Dependent Yield Stress
JF  - Proceedings in Applied Mathematics and Mechanics (PAMM). 4 (2004), H. 1
Y1  - 2004
SN  - 1617-7061
SP  - 231
EP  - 233
ER  - 
TY  - JOUR
A1  - Vu, Duc-Khoi
A1  - Staat, Manfred
T1  - An algorithm for shakedown analysis of structure with temperature dependent yield stress
N2  - This work is an attempt to answer the question: How to use convex programming in shakedown analysis of structures made of materials with temperature-dependent properties. Based on recently established shakedown theorems and formulations, a dual relationship between upper and lower bounds of the shakedown limit load is found, an algorithmfor shakedown analysis is proposed. While the original problem is neither convex nor concave, the algorithm presented here has the advantage of employing convex programming tools.
KW  - Einspielen <Werkstoff>
KW  - Temperaturabhängigkeit
KW  - Fließgrenze
KW  - Shakedown
KW  - shakedown analysis
KW  - yield stress
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Schuba, Marko
A1  - Reichl, Peter
T1  - An Analysis of Retransmission Strategies for Reliable Multicast Protocols / Schuba, M. ; Reichl, P.
JF  - Performance of information and communication systems : IFIP TC 6,WG 6.3 Seventh International Conference on Performance of Information and Communication Systems (PICS '98), 25 - 28 May, Lund, Sweden / ed. by Ulf Körner ...
Y1  - 1998
SN  - 0-412-83730-7
SP  - 1
EP  - 12
PB  - Chapman  Hall
CY  - London
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Bronder, Thomas
A1  - Bäcker, Matthias
A1  - Wang, Ping
A1  - Schöning, Michael Josef
T1  - An application of a scanning light-addressable potentiometric sensor for label-free DNA detection
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 164
EP  - 168
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An application of adaptive control in the behavioural framework
T2  - 21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings
Y1  - 2011
SN  - 978-1-4577-1078-0 ; 978-0-7695-4495-3
SP  - 49
EP  - 54
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Leinhos, Marcel
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - An application of field-effect sensors for in-situ monitoring of degradation of biopolymers
JF  - Sensors and actuators B: Chemical
N2  - The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al–p-Si–SiO2–Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.10.058
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 954
EP  - 959
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Kob, Malte
A1  - Niendorf, Thoralf
A1  - Butenweg, Christoph
T1  - An approach for numerical calculation of glottal flow during glottal closure
T2  - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone
Y1  - 2009
SN  - 978-3-9808659-6-8
SP  - 1722
EP  - 1725
PB  - DEGA
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Rao, Deepak
A1  - Pathrose, Plato
A1  - Hüning, Felix
A1  - Sid, Jithin
T1  - An Approach for Validating Safety of Perception Software in Autonomous Driving Systems
T2  - Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16–18, 2019, Proceedings
N2  - The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon’s DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.
KW  - Advanced driver assistance systems (ADAS/AD)
KW  - ISO 26262
KW  - Safety-critical systems validation
KW  - Safety of the intended functionality (SOTIF)
Y1  - 2019
SN  - 978-3-030-32872-6
U6  - http://dx.doi.org/10.1007/978-3-030-32872-6_20
SP  - 303
EP  - 316
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Bialonski, Stephan
A1  - Allefeld, C.
A1  - Wellmer, J.
A1  - Elger, C.
A1  - Lehnertz, K.
T1  - An approach to identify synchronization clusters within the epileptic network
JF  - Klinische Neurophysiologie
Y1  - 2008
U6  - http://dx.doi.org/10.1055/s-2008-1072881
VL  - 39
IS  - 1
SP  - A79
ER  - 
TY  - JOUR
A1  - Biselli, Manfred
A1  - Born, C.
A1  - Thömmes, J.
A1  - Wandrey, C.
T1  - An approach to integrated antibody production: Coupling of fluidized bed cultivation and  fluidized bed adsorption / Born, C. ; Thömmes, J. ; Biselli, M. ; Wandrey, C. ; Kula, M.-R.
JF  - Bioprocess Engineering. 15 (1996), H. 1
Y1  - 1996
SN  - 1615-7591
SP  - 21
EP  - 29
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Pedraza, A. M.
A1  - Gandhi, D.
A1  - Ingebrandt, S.
A1  - Moritz, W.
A1  - Schöning, Michael Josef
T1  - An array of field-effect nanoplate SOI capacitors for (bio-)chemical sensing
JF  - Biosensors and Bioelectronics. 26 (2011), H. 6
Y1  - 2011
SN  - 0956-5663
SP  - 3023
EP  - 3028
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Welden, Rene
A1  - Buniatyan, Vahe V.
A1  - Schöning, Michael Josef
T1  - An Array of On-Chip Integrated, Individually Addressable Capacitive Field-Effect Sensors with Control Gate: Design and Modelling
JF  - Sensors
N2  - The on-chip integration of multiple biochemical sensors based on field-effect electrolyte-insulator-semiconductor capacitors (EISCAP) is challenging due to technological difficulties in realization of electrically isolated EISCAPs on the same Si chip. In this work, we present a new simple design for an array of on-chip integrated, individually electrically addressable EISCAPs with an additional control gate (CG-EISCAP). The existence of the CG enables an addressable activation or deactivation of on-chip integrated individual CG-EISCAPs by simple electrical switching the CG of each sensor in various setups, and makes the new design capable for multianalyte detection without cross-talk effects between the sensors in the array. The new designed CG-EISCAP chip was modelled in so-called floating/short-circuited and floating/capacitively-coupled setups, and the corresponding electrical equivalent circuits were developed. In addition, the capacitance-voltage curves of the CG-EISCAP chip in different setups were simulated and compared with that of a single EISCAP sensor. Moreover, the sensitivity of the CG-EISCAP chip to surface potential changes induced by biochemical reactions was simulated and an impact of different parameters, such as gate voltage, insulator thickness and doping concentration in Si, on the sensitivity has been discussed.
KW  - equivalent circuit
KW  - multianalyte detection
KW  - control gate
KW  - on-chip integrated addressable EISCAP sensors
KW  - capacitive field-effect sensor
Y1  - 2021
U6  - http://dx.doi.org/10.3390/s21186161
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Field-Effect Sensors: From pH Sensing to Biosensing"
VL  - 21
IS  - 18
SP  - 17
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Spiess, Elmar
A1  - Wilfried, Reichardt
A1  - Alvarez, Gerardo
A1  - Gottrup, Marcus
A1  - Öhlschläger, Peter
T1  - An Artificial PAP Gene Breaks Self-tolerance and Promotes Tumor Regression in the TRAMP Model for Prostate Carcinoma
JF  - Molecular Therapy
Y1  - 2011
SN  - 1525-0016
VL  - 20
IS  - 3
SP  - 555
EP  - 564
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Roikaew, W.
A1  - Ulber, R.
T1  - An automated pilot plant for the bioengineering processing of concentrated whey
T2  - European BioPerspectives : in cooperation with BIOTECHNICA 2008 : 7 - 9 October 2008 Hannover, Germany ; book of abstracts ; abstracts, poster programme
Y1  - 2008
SP  - 98
PB  - Dechema
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties
JF  - Limit State of Materials and Structures : Direct Methods 2. Saxcé, Géry de (Hrsg.)
Y1  - 2013
SN  - 978-94-007-5424-9
SP  - 89
EP  - 102
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Bergener, Philipp
A1  - Breuker, Dominic
A1  - Delfmann, Patrick
A1  - Eggert, Mathias
T1  - An Efficient Business Process Compliance Checking Approach
T2  - Governance and Sustainability in Information Systems. Managing the Transfer and Diffusion of IT : IFIP WG 8.6 International Working Conference, Hamburg, Germany, September 22-24, 2011. Proceedings
Y1  - 2011
U6  - http://dx.doi.org/10.1007/978-3-642-24148-2_19
SP  - 282
EP  - 287
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - http://dx.doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - JOUR
A1  - Kraff, Oliver
A1  - Bitz, Andreas
A1  - Kruszona, Stefan
A1  - Orzada, Stephan
A1  - Schaefer, Lena C.
A1  - Theysohn, Jens M.
A1  - Maderwald, Stefan
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - An eight-channel phased array RF coil for spine MR imaging at 7 T
JF  - Investigative Radiology
Y1  - 2009
U6  - http://dx.doi.org/10.1097/RLI.0b013e3181b24ab7
SN  - 1536-0210
VL  - 44
IS  - 11
SP  - 734
EP  - 740
PB  - Lippincott Williams & Wilkins
ER  - 
TY  - JOUR
A1  - Kraff, Oliver
A1  - Bitz, Andreas
A1  - Dammann, Philipp
A1  - Ladd, Susanne C.
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - An eight-channel transmit/receive multipurpose coil for musculoskeletal MR imaging at 7 T
JF  - Medical Physics
N2  - Purpose:
MRI plays a leading diagnostic role in assessing the musculoskeletal (MSK) system and is well established for most questions at clinically used field strengths (up to 3 T). However, there are still limitations in imaging early stages of cartilage degeneration, very fine tendons and ligaments, or in locating nerve lesions, for example. 7 T MRI of the knee has already received increasing attention in the current published literature, but there is a strong need to develop new radiofrequency (RF) coils to assess more regions of the MSK system. In this work, an eight-channel transmit/receive RF array was built as a multipurpose coil for imaging some of the thus far neglected regions. An extensive coil characterization protocol and first in vivo results of the human wrist, shoulder, elbow, knee, and ankle imaged at 7 T will be presented.

Methods:
Eight surface loop coils with a dimension ofurn:x-wiley:00942405:media:mp7176:mp7176-math-0001 were machined from FR4 circuit board material. To facilitate easy positioning, two coil clusters, each with four loop elements, were combined to one RF transmit/receive array. An overlapped and shifted arrangement of the coil elements was chosen to reduce the mutual inductance between neighboring coils. A phantom made of body-simulating liquid was used for tuning and matching on the bench. Afterward, the S-parameters were verified on a human wrist, elbow, and shoulder. For safety validation, a detailed compliance test was performed including full wave simulations of the RF field distribution and the corresponding specific absorption rate (SAR) for all joints. In vivo images of four volunteers were assessed with gradient echo and spin echo sequences modified to obtain optimal image contrast, full anatomic coverage, and the highest spatial resolution within a reasonable acquisition time. The performance of the RF coil was additionally evaluated by in vivo B1 mapping.

Results:
A comparison of B1 per unit power, flip angle distribution, and anatomic images showed a fairly homogeneous excitation for the smaller joints (elbow, wrist, and ankle), while for the larger joints, the shoulder and especially the knee, B1 inhomogeneities and limited penetration depth were more pronounced. However, the greater part of the shoulder joint could be imaged.In vivo images rendered very fine anatomic details such as fascicles of the median nerve and the branching of the nerve bundles. High-resolution images of cartilage, labrum, and tendons could be acquired. Additionally, turbo spin echo (TSE) and inversion recovery sequences performed very well.

Conclusions:
This study demonstrates that the concept of two four-channel transmit/receive RF arrays can be used as a multipurpose coil for high-resolutionin vivo MR imaging of the musculoskeletal system at 7 T. Not only gradient echo but also typical clinical and SAR-intensive sequences such as STIR and TSE performed well. Imaging of small structures and peripheral nerves could in particular benefit from this technique.
Y1  - 2010
U6  - http://dx.doi.org/10.1118/1.3517176
SN  - 2473-4209
VL  - 37
IS  - 12
SP  - 6368
EP  - 6376
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Colombo, Daniele
A1  - Drira, Slah
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis
JF  - International Journal for Numerical Methods in Engineering
N2  - Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.
KW  - distorted element
KW  - ES-FEM
KW  - FS-FEM
KW  - non-simplex S-FEM elements
KW  - S-FEM
Y1  - 2022
U6  - http://dx.doi.org/10.1002/nme.7126
SN  - 1097-0207
VL  - 124
IS  - 2
SP  - 402
EP  - 433
PB  - Wiley
CY  - Chichester
ER  - 
TY  - JOUR
A1  - Lück, Reinhard
A1  - Gerling, Ulrich
A1  - Predel, Bruno
T1  - An entropy paradox of the association model
JF  - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4
Y1  - 1989
SN  - 0044-3093 ; 0179-4841
SP  - 270
EP  - 275
ER  - 
TY  - JOUR
A1  - Vahidpour, Farnoosh
A1  - Alghazali, Yousef
A1  - Akca, Sevilay
A1  - Hommes, Gregor
A1  - Schöning, Michael Josef
T1  - An Enzyme-Based Interdigitated Electrode-Type Biosensor for Detecting Low Concentrations of H₂O₂ Vapor/Aerosol
JF  - Chemosensors
N2  - This work introduces a novel method for the detection of H₂O₂ vapor/aerosol of low concentrations, which is mainly applied in the sterilization of equipment in medical industry. Interdigitated electrode (IDE) structures have been fabricated by means of microfabrication techniques. A differential setup of IDEs was prepared, containing an active sensor element (active IDE) and a passive sensor element (passive IDE), where the former was immobilized with an enzymatic membrane of horseradish peroxidase that is selective towards H₂O₂. Changes in the IDEs’ capacitance values (active sensor element versus passive sensor element) under H₂O₂ vapor/aerosol atmosphere proved the detection in the concentration range up to 630 ppm with a fast response time (<60 s). The influence of relative humidity was also tested with regard to the sensor signal, showing no cross-sensitivity. The repeatability assessment of the IDE biosensors confirmed their stable capacitive signal in eight subsequent cycles of exposure to H₂O₂ vapor/aerosol. Room-temperature detection of H₂O₂ vapor/aerosol with such miniaturized biosensors will allow a future three-dimensional, flexible mapping of aseptic chambers and help to evaluate sterilization assurance in medical industry.
Y1  - 2022
U6  - http://dx.doi.org/10.3390/chemosensors10060202
SN  - 2227-9040
N1  - This article belongs to the Special Issue "Bioinspired Chemical Sensors and Micro-Nano Devices"
VL  - 10
IS  - 6
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Moseley, Fiona
A1  - Halamek, Jan
A1  - Kramer, Friederike
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible CNOT logic gate realized in a flow system
JF  - Analyst
N2  - An enzyme system organized in a flow device was used to mimic a reversible Controlled NOT (CNOT) gate with two input and two output signals. Reversible conversion of NAD⁺ and NADH cofactors was used to perform a XOR logic operation, while biocatalytic hydrolysis of p-nitrophenyl phosphate resulted in an Identity operation working in parallel. The first biomolecular realization of a CNOT gate is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
Y1  - 2014
U6  - http://dx.doi.org/10.1039/C4AN00133H
SN  - 1364-5528 (E-Journal) ; 0003-2654 (Print)
VL  - 139
IS  - 8
SP  - 1839
EP  - 1842
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Honarvarfard, Elham
A1  - Gamella, Maria
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible Controlled NOT (CNOT) logic gate operating on a semiconductor transducer
JF  - Applied Materials Today
N2  - An enzyme-based biocatalytic system mimicking operation of a logically reversible Controlled NOT (CNOT) gate has been interfaced with semiconductor electronic transducers. Electrolyte–insulator–semiconductor (EIS) structures have been used to transduce chemical changes produced by the enzyme system to an electronically readable capacitive output signal using field-effect features of the EIS device. Two enzymes, urease and esterase, were immobilized on the insulating interface of EIS structure producing local pH changes performing XOR logic operation controlled by various combinations of the input signals represented by urea and ethyl butyrate. Another EIS transducer was functionalized with esterase only, thus performing Identity (ID) logic operation for the ethyl butyrate input. Both semiconductor devices assembled in parallel operated as a logically reversible CNOT gate. The present system, despite its simplicity, demonstrated for the first time logically reversible function of the enzyme system transduced electronically with the semiconductor devices. The biomolecular realization of a CNOT gate interfaced with semiconductors is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
KW  - Electrolyte–insulator–semiconductor
KW  - Capacitive field-effect
KW  - CNOT
KW  - XOR
KW  - Enzyme logic gate
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.apmt.2017.08.003
SN  - 2352-9407
VL  - 9
SP  - 266
EP  - 270
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Niedermeyer, Angela
A1  - Zhou, Bei
A1  - Dursun, Gözde
A1  - Temiz Artmann, Aysegül
A1  - Markert, Bernd
T1  - An examination of tissue engineered scaffolds in a bioreactor
JF  - Proceedings in Applied Mathematics and Mechanics PAMM
N2  - Replacement tissues, designed to fill in articular cartilage defects, should exhibit the same properties as the native material. The aim of this study is to foster the understanding of, firstly, the mechanical behavior of the material itself and, secondly, the influence of cultivation parameters on cell seeded implants as well as on cell migration into acellular implants. In this study, acellular cartilage replacement material is theoretically, numerically and experimentally investigated regarding its viscoelastic properties, where a phenomenological model for practical applications is developed. Furthermore, remodeling and cell migration are investigated.
Y1  - 2016
U6  - http://dx.doi.org/10.1002/pamm.201610038
SN  - 1617-7061
N1  - Joint Annual Meeting of DMV and GAMM 2016, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung (DMV), Braunschweig, DE, Mar 7-11, 2016
VL  - 16
IS  - 1
SP  - 99
EP  - 100
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Arent, Jan-Christoph
A1  - Hausmann, Joachim
T1  - An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates
JF  - Journal of Composite Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1177/0021998319846556
SN  - 1530-793X
VL  - 53
IS  - 26-27
SP  - 3757
EP  - 3773
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Bühler, Gerhard
T1  - An experimental command and control information system based on Enterprise Java bean technology
JF  - Proceedings of the 7th International Command and Control Research and Technology Symposium, September 2002, Quebec City, Kanada
Y1  - 2002
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Tran, Linda
A1  - Mottaghy, K.
A1  - Arlt-Körfer, Sabine
A1  - Waluga, Christian
A1  - Behbahani, Mehdi
T1  - An experimental study of shear-dependent human platelet adhesion and underlying protein-binding mechanisms in a cylindrical Couette system
JF  - Biomedizinische Technik
Y1  - 2017
U6  - http://dx.doi.org/10.1515/bmt-2015-0034
SN  - 0013-5585
VL  - 62
IS  - 4
SP  - 383
EP  - 392
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Behbahani, Mehdi
T1  - An Experimental Study of Thrombocyte Reactions in Response to Biomaterial Surfaces and Varying Shear Stress
T2  - Proceedings of the International Conference on Biomedical Engineering and Systems Prague, Czech Republic, August 14-15, 2014
Y1  - 2014
SP  - Paper 125
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - An extension strain type Mohr–Coulomb criterion
JF  - Rock mechanics and rock engineering
N2  - Extension fractures are typical for the deformation under low or no confining pressure. They can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. In this article, it is shown that the simple extension strain criterion makes unrealistic strength predictions in biaxial compression and tension. To overcome this major limitation, a new extension strain criterion is proposed by adding a weighted principal shear component to the simple criterion. The shear weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr–Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting extension failure modes, which are unexpected in the classical understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain leading to dilatancy. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak stress CP. Different from compressive loading, tensile loading requires only a limited number of critical cracks to cause failure. Therefore, for tensile stresses, the failure criteria must be modified somehow, possibly by a cut-off corresponding to the CI stress. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.
Y1  - 2021
U6  - http://dx.doi.org/10.1007/s00603-021-02608-7
SN  - 1434-453X
N1  - Corresponding author: Manfred Staat
VL  - 54
IS  - 12
SP  - 6207
EP  - 6233
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Henderson, Colin James
A1  - Kapelyukh, Yury
A1  - Rode, Anja
A1  - Mclaren, Aileen W.
A1  - MacLeod, Alastair Kenneth
A1  - Lin, De
A1  - Wright, Jayne
A1  - Stanley, Lesley
A1  - Wolf, C. Roland
T1  - An extensively humanised mouse model to predict pathways of drug disposition, drug/drug interactions, and to facilitate the design of clinical trials
JF  - Drug Metabolism and Disposition
Y1  - 2019
U6  - http://dx.doi.org/10.1124/dmd.119.086397
IS  - Early view
ER  - 
TY  - CHAP
A1  - Schuba, Marko
A1  - Höfken, Hans-Wilhelm
A1  - Linzbach, Sophie
T1  - An ICS Honeynet for Detecting and Analyzing Cyberattacks in Industrial Plants
T2  - 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)
N2  - Cybersecurity of Industrial Control Systems (ICS) is an important issue, as ICS incidents may have a direct impact on safety of people or the environment. At the same time the awareness and knowledge about cybersecurity, particularly in the context of ICS, is alarmingly low. Industrial honeypots offer a cheap and easy to implement way to raise cybersecurity awareness and to educate ICS staff about typical attack patterns. When integrated in a productive network, industrial honeypots may not only reveal attackers early but may also distract them from the actual important systems of the network. Implementing multiple honeypots as a honeynet, the systems can be used to emulate or simulate a whole Industrial Control System. This paper describes a network of honeypots emulating HTTP, SNMP, S7communication and the Modbus protocol using Conpot, IMUNES and SNAP7. The nodes mimic SIMATIC S7 programmable logic controllers (PLCs) which are widely used across the globe. The deployed honeypots' features will be compared with the features of real SIMATIC S7 PLCs. Furthermore, the honeynet has been made publicly available for ten days and occurring cyberattacks have been analyzed
KW  - Conpot
KW  - honeypot
KW  - honeynet
KW  - ICS
KW  - cybersecurity
Y1  - 2022
SN  - 978-1-6654-4231-2
SN  - 978-1-6654-4232-9
U6  - http://dx.doi.org/10.1109/ICECET52533.2021.9698746
N1  - 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET). 09-10 December 2021. Cape Town, South Africa.
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Vogler, Heiko
T1  - An implementation of syntax directed functional programming on nested-stack machines
JF  - Formal Aspects of Computing. 4 (1992), H. 4
Y1  - 1992
SN  - 0934-5043
SP  - 341
EP  - 375
ER  - 
TY  - JOUR
A1  - Öhlschläger, Peter
A1  - Pes, Michaela
A1  - Osen, Wolfram
A1  - Dürst, Matthias
T1  - An improved rearranged Human Papillomavirus Type 16 E7 DNA vaccine candidate (HPV-16 E7SH) induces an E7 wildtype-specific T cell response / Öhlschläger, Peter ; Pes, Michaela ; Osen, Wolfram ; Dürst, Matthias ; Schneider, Achim ; Gissmann, Lutz ; Kaufman
JF  - Vaccine. 24 (2006), H. 15
Y1  - 2006
SN  - 0264-410X
SP  - 2880
EP  - 2893
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Marso, M.
A1  - Gersdorf, P.
A1  - Fox, A.
T1  - An InAlAs-InGaAs OPFET with responsivity above 200 A/W at 1.3-&#956;m wavelength. Marso, M.; Gersdorf, P.; Fox, A.; Hodel, U.; Lambertini, R.; Kordos, P.
JF  - IEEE Photonics Technology Letters. 11 (1999), H. 1
Y1  - 1999
SN  - 1041-1135
SP  - 117
EP  - 119
ER  - 
TY  - JOUR
A1  - Kowalewski, Paul
A1  - Bragard, Michael
A1  - Hüning, Felix
A1  - De Doncker, Rik W.
T1  - An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives
JF  - IEEE Transactions on Instrumentation and Measurement
N2  - This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.
KW  - Rotary encoder
KW  - Wiegand sensor
Y1  - 2023
U6  - http://dx.doi.org/10.1109/TIM.2023.3326166
SN  - 0018-9456 (Print)
SN  - 1557-9662 (Online)
N1  - Early Access
SP  - 10 Seiten
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - An Initial Sizing Methodology for Hybrid-Electric Light Aircraft
T2  - AIAA AVIATION Forum 2018 Aviation Technology, Integration, and Operations Conference, Atlanta, Georgia, June 25 - 29, 2018
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-4229
ER  - 
TY  - JOUR
A1  - Schiffels, Johannes
A1  - Pinkenburg, Olaf
A1  - Schelden, Maximilian
A1  - Aboulnaga, El-Hussiny A. A.
A1  - Baumann, Marcus
A1  - Selmer, Thorsten
T1  - An innovative cloning platform enables large-scale production and maturation of an oxygen-tolerant [NiFe]-hydrogenase from cupriavidus necator in Escherichia coli
JF  - PLOS one. 2013
Y1  - 2013
U6  - http://dx.doi.org/10.1371/journal.pone.0068812
SN  - 1932-6203
PB  - Public Library of Science
CY  - San Francisco, California
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
T1  - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 8
CY  - Helsinki
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Sensors and Actuators B. 65 (2000), H. 1-3
Y1  - 2000
SN  - 0925-4005
SP  - 291
EP  - 295
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou
Y1  - 1998
N1  - International Meeting on Chemical Sensors ; (7, 1998, Beijing) ; International Meeting on Chemical Sensors (IMCS) ; (7 : ; 1998.07.27-30 : ; Beijing)
SP  - 314
EP  - 316
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Groth, Anne
A1  - Hans, Stefan
A1  - Campos-Ortega, José A.
T1  - An instructive function for Notch in promoting gliogenesis in the zebrafish retina
JF  - Development
Y1  - 2001
SN  - 0950-1991
VL  - 128
IS  - 7
SP  - 1099
EP  - 1107
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Panagiotopoulos, P. D.
T1  - An integral "Equation" approach to the unilateral contact problem
JF  - ZAMM - Zeitschrift für angewandte Mathematik und Mechanik. 59 (1979), H. 8
Y1  - 1979
SN  - 1521-4001
SP  - 392
EP  - 393
ER  - 
TY  - CHAP
A1  - Zug, Sebastian
A1  - Niemueller, Tim
A1  - Hochgeschwender, Nico
A1  - Seidensticker, Kai
A1  - Seidel, Martin
A1  - Friedrich, Tim
A1  - Neumann, Tobias
A1  - Karras, Ulrich
A1  - Kraetzschmar, Gerhard K.
A1  - Ferrein, Alexander
T1  - An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_13
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 157
EP  - 168
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Pütz, Sebastian
A1  - Baier, Ralph
A1  - Brauner, Philipp
A1  - Brillowski, Florian
A1  - Dammers, Hannah
A1  - Liehner, Luca
A1  - Mertens, Alexander
A1  - Rodemann, Niklas
A1  - Schneider, Sebastian
A1  - Schollemann, Alexander
A1  - Steuer-Dankert, Linda
A1  - Vervier, Luisa
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank T.
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
T1  - An interdisciplinary view on humane interfaces for digital shadows in the internet of production
T2  - 2022 15th International Conference on Human System Interaction (HSI)
N2  - Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers’ capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.
KW  - digital twin
KW  - digital shadow
KW  - cyber-physical production system
KW  - human-machine interface
Y1  - 2022
SN  - 978-1-6654-6823-7 (Print)
SN  - 978-1-6654-6822-0 (Online)
U6  - http://dx.doi.org/10.1109/HSI55341.2022.9869467
SN  - 2158-2246 (Print)
SN  - 2158-2254 (Online)
N1  - 15th International Conference on Human System Interaction (HSI), 28-31 July 2022, Melbourne, Australia.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Seboldt, Wolfgang
T1  - An Interstellar – Heliopause mission using a combination of solar/radioisotope electric propulsion
T2  - Presented at the 32nd International Electric Propulsion Conference
N2  - There is common agreement within the scientific community that in order to understand our local galactic environment it will be necessary to send a spacecraft into the region beyond the solar wind termination shock. Considering distances of 200 AU for a new mission, one needs a spacecraft travelling at a speed of close to 10 AU/yr in order to keep the mission duration in the range of less than 25 yrs, a transfer time postulated by ESA.Two propulsion options for the mission have been proposed and discussed so far: the solar sail propulsion and the ballistic/radioisotope electric propulsion. As a further alternative, we here investigate a combination of solar-electric propulsion and radioisotope-electric propulsion. The solar-electric propulsion stage consists of six 22 cm diameter “RIT-22”ion thrusters working with a high specific impulse of 7377 s corresponding to a positive grid voltage of 5 kV. Solar power of 53 kW BOM is provided by a light-weight solar array. The REP-stage consists of four space-proven 10 cm diameter “RIT-10” ion thrusters that will be operating one after the other for 9 yrs in total. Four advanced radioisotope generators provide 648 W at BOM. The scientific instrument package is oriented at earlier studies. For its mass and electric power requirement 35 kg and 35 W are assessed, respectively. Optimized trajectory calculations, treated in a separate contribution, are based on our “InTrance” method.The program yields a burn out of the REP stage in a distance of 79.6 AU for a usage of 154 kg of Xe propellant. With a C3 = 45,1 (km/s)2 a heliocentric probe velocity of 10 AU/yr is reached at this distance, provided a close Jupiter gravity assist adds a velocity increment of 2.7 AU/yr. A transfer time of 23.8 yrs results for this scenario requiring about 450 kg Xe for the SEP stage, jettisoned at 3 AU. We interpret the SEP/REP propulsion as a competing alternative to solar sail and ballistic/REP propulsion. Omiting a Jupiter fly-by even allows more launch flexibility, leaving the mission duration in the range of the ESA specification.
Y1  - 2011
N1  - 32nd International Electric Propulsion Conference, 11-15 September. Wiesbaden, Germany
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Kumwilaisak, W.
T1  - An intraframe error concealment: nonlinear pattern alignment and directional interpolation / Kumwilaisak, W. ; Hartung, F.
JF  - Conference on Image Processing, 2004. ICIP '04. 2004 International / Vol. 2 .
Y1  - 2004
N1  - http://dx.doi.org/10.1109/ICIP.2004.1419426
SP  - 825
EP  - 828
ER  -