TY  - JOUR
A1  - Öhlschläger, Peter
A1  - Pes, Michaela
A1  - Osen, Wolfram
A1  - Dürst, Matthias
T1  - An improved rearranged Human Papillomavirus Type 16 E7 DNA vaccine candidate (HPV-16 E7SH) induces an E7 wildtype-specific T cell response / Öhlschläger, Peter ; Pes, Michaela ; Osen, Wolfram ; Dürst, Matthias ; Schneider, Achim ; Gissmann, Lutz ; Kaufman
JF  - Vaccine. 24 (2006), H. 15
Y1  - 2006
SN  - 0264-410X
SP  - 2880
EP  - 2893
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Marso, M.
A1  - Gersdorf, P.
A1  - Fox, A.
T1  - An InAlAs-InGaAs OPFET with responsivity above 200 A/W at 1.3-μm wavelength. Marso, M.; Gersdorf, P.; Fox, A.; Hodel, U.; Lambertini, R.; Kordos, P.
JF  - IEEE Photonics Technology Letters. 11 (1999), H. 1
Y1  - 1999
SN  - 1041-1135
SP  - 117
EP  - 119
ER  - 
TY  - JOUR
A1  - Kowalewski, Paul
A1  - Bragard, Michael
A1  - Hüning, Felix
A1  - De Doncker, Rik W.
T1  - An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives
JF  - IEEE Transactions on Instrumentation and Measurement
N2  - This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.
KW  - Rotary encoder
KW  - Wiegand sensor
Y1  - 2023
U6  - http://dx.doi.org/10.1109/TIM.2023.3326166
SN  - 0018-9456 (Print)
SN  - 1557-9662 (Online)
N1  - Early Access
SP  - 10 Seiten
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - An Initial Sizing Methodology for Hybrid-Electric Light Aircraft
T2  - AIAA AVIATION Forum 2018 Aviation Technology, Integration, and Operations Conference, Atlanta, Georgia, June 25 - 29, 2018
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-4229
ER  - 
TY  - JOUR
A1  - Schiffels, Johannes
A1  - Pinkenburg, Olaf
A1  - Schelden, Maximilian
A1  - Aboulnaga, El-Hussiny A. A.
A1  - Baumann, Marcus
A1  - Selmer, Thorsten
T1  - An innovative cloning platform enables large-scale production and maturation of an oxygen-tolerant [NiFe]-hydrogenase from cupriavidus necator in Escherichia coli
JF  - PLOS one. 2013
Y1  - 2013
U6  - http://dx.doi.org/10.1371/journal.pone.0068812
SN  - 1932-6203
PB  - Public Library of Science
CY  - San Francisco, California
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
T1  - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 8
CY  - Helsinki
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Sensors and Actuators B. 65 (2000), H. 1-3
Y1  - 2000
SN  - 0925-4005
SP  - 291
EP  - 295
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou
Y1  - 1998
N1  - International Meeting on Chemical Sensors ; (7, 1998, Beijing) ; International Meeting on Chemical Sensors (IMCS) ; (7 : ; 1998.07.27-30 : ; Beijing)
SP  - 314
EP  - 316
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Groth, Anne
A1  - Hans, Stefan
A1  - Campos-Ortega, José A.
T1  - An instructive function for Notch in promoting gliogenesis in the zebrafish retina
JF  - Development
Y1  - 2001
SN  - 0950-1991
VL  - 128
IS  - 7
SP  - 1099
EP  - 1107
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Panagiotopoulos, P. D.
T1  - An integral "Equation" approach to the unilateral contact problem
JF  - ZAMM - Zeitschrift für angewandte Mathematik und Mechanik. 59 (1979), H. 8
Y1  - 1979
SN  - 1521-4001
SP  - 392
EP  - 393
ER  - 
TY  - CHAP
A1  - Zug, Sebastian
A1  - Niemueller, Tim
A1  - Hochgeschwender, Nico
A1  - Seidensticker, Kai
A1  - Seidel, Martin
A1  - Friedrich, Tim
A1  - Neumann, Tobias
A1  - Karras, Ulrich
A1  - Kraetzschmar, Gerhard K.
A1  - Ferrein, Alexander
T1  - An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_13
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 157
EP  - 168
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Pütz, Sebastian
A1  - Baier, Ralph
A1  - Brauner, Philipp
A1  - Brillowski, Florian
A1  - Dammers, Hannah
A1  - Liehner, Luca
A1  - Mertens, Alexander
A1  - Rodemann, Niklas
A1  - Schneider, Sebastian
A1  - Schollemann, Alexander
A1  - Steuer-Dankert, Linda
A1  - Vervier, Luisa
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank T.
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
T1  - An interdisciplinary view on humane interfaces for digital shadows in the internet of production
T2  - 2022 15th International Conference on Human System Interaction (HSI)
N2  - Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers’ capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.
KW  - digital twin
KW  - digital shadow
KW  - cyber-physical production system
KW  - human-machine interface
Y1  - 2022
SN  - 978-1-6654-6823-7 (Print)
SN  - 978-1-6654-6822-0 (Online)
U6  - http://dx.doi.org/10.1109/HSI55341.2022.9869467
SN  - 2158-2246 (Print)
SN  - 2158-2254 (Online)
N1  - 15th International Conference on Human System Interaction (HSI), 28-31 July 2022, Melbourne, Australia.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Seboldt, Wolfgang
T1  - An Interstellar – Heliopause mission using a combination of solar/radioisotope electric propulsion
T2  - Presented at the 32nd International Electric Propulsion Conference
N2  - There is common agreement within the scientific community that in order to understand our local galactic environment it will be necessary to send a spacecraft into the region beyond the solar wind termination shock. Considering distances of 200 AU for a new mission, one needs a spacecraft travelling at a speed of close to 10 AU/yr in order to keep the mission duration in the range of less than 25 yrs, a transfer time postulated by ESA.Two propulsion options for the mission have been proposed and discussed so far: the solar sail propulsion and the ballistic/radioisotope electric propulsion. As a further alternative, we here investigate a combination of solar-electric propulsion and radioisotope-electric propulsion. The solar-electric propulsion stage consists of six 22 cm diameter “RIT-22”ion thrusters working with a high specific impulse of 7377 s corresponding to a positive grid voltage of 5 kV. Solar power of 53 kW BOM is provided by a light-weight solar array. The REP-stage consists of four space-proven 10 cm diameter “RIT-10” ion thrusters that will be operating one after the other for 9 yrs in total. Four advanced radioisotope generators provide 648 W at BOM. The scientific instrument package is oriented at earlier studies. For its mass and electric power requirement 35 kg and 35 W are assessed, respectively. Optimized trajectory calculations, treated in a separate contribution, are based on our “InTrance” method.The program yields a burn out of the REP stage in a distance of 79.6 AU for a usage of 154 kg of Xe propellant. With a C3 = 45,1 (km/s)2 a heliocentric probe velocity of 10 AU/yr is reached at this distance, provided a close Jupiter gravity assist adds a velocity increment of 2.7 AU/yr. A transfer time of 23.8 yrs results for this scenario requiring about 450 kg Xe for the SEP stage, jettisoned at 3 AU. We interpret the SEP/REP propulsion as a competing alternative to solar sail and ballistic/REP propulsion. Omiting a Jupiter fly-by even allows more launch flexibility, leaving the mission duration in the range of the ESA specification.
Y1  - 2011
N1  - 32nd International Electric Propulsion Conference, 11-15 September. Wiesbaden, Germany
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Kumwilaisak, W.
T1  - An intraframe error concealment: nonlinear pattern alignment and directional interpolation / Kumwilaisak, W. ; Hartung, F.
JF  - Conference on Image Processing, 2004. ICIP '04. 2004 International / Vol. 2 .
Y1  - 2004
N1  - http://dx.doi.org/10.1109/ICIP.2004.1419426
SP  - 825
EP  - 828
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; Kämper, K.-P.; Dasbach, U.; Döpper, J.; Ehrfeld, W.; Kaupert, M.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 275
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
T1  - An investigation of the spin structure of the proton in deep inelastic scattering of polarised muons and polarised protons
JF  - Nuclear Physics B
N2  - The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured in the range 0.01<×<0.7. The spin dependent structure function g1(x) for the proton has been determined and, combining the data with earlier SLAC measurements, its integral over x found to be 0.126±0.010(stat.)±0.015(syst.), in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Biorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These integrals lead to the conclusion, in the naïve quark parton model, that the total quark spin constitutes a rather small fraction of the spin of the nucleon. Results are also presented on the asymmetries in inclusive hadron production which are consistent with the above picture.
Y1  - 1989
SN  - 0550-3213
N1  - European Muon Collaboration
VL  - 328
IS  - 1
SP  - 1
EP  - 35
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Simonis, A.
A1  - Lüth, H.
T1  - An ISFET-based penicillin sensor with high sensitivity, low detection limit and long lifetime
JF  - Sensors and Actuators B. 76 (2001), H. 1-3
Y1  - 2001
SN  - 0925-4005
SP  - 519
EP  - 526
ER  - 
TY  - JOUR
A1  - Abel, Alexander
A1  - Kahmann, Stephanie Lucina
A1  - Mellon, Stephen
A1  - Staat, Manfred
A1  - Jung, Alexander
T1  - An open-source tool for the validation of finite element models using three-dimensional full-field measurements
JF  - Medical Engineering & Physics
N2  - Three-dimensional (3D) full-field measurements provide a comprehensive and accurate validation of finite element (FE) models. For the validation, the result of the model and measurements are compared based on two respective point-sets and this requires the point-sets to be registered in one coordinate system. Point-set registration is a non-convex optimization problem that has widely been solved by the ordinary iterative closest point algorithm. However, this approach necessitates a good initialization without which it easily returns a local optimum, i.e. an erroneous registration. The globally optimal iterative closest point (Go-ICP) algorithm has overcome this drawback and forms the basis for the presented open-source tool that can be used for the validation of FE models using 3D full-field measurements. The capability of the tool is demonstrated using an application example from the field of biomechanics. Methodological problems that arise in real-world data and the respective implemented solution approaches are discussed.
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.medengphy.2019.10.015
SN  - 1350-4533
VL  - 77
SP  - 125
EP  - 129
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Verghese, S.
A1  - Zamdmer, N.
A1  - Hu, Qing
T1  - An optical correlator using a low-temperature-grown GaAs photoconductor / S. Verghese ; N. Zamdmer ; Qing Hu .... A. Förster
JF  - Applied physics letters. 69 (1996), H. 6
Y1  - 1996
SN  - 0003-6951
N1  - ISSN der E-Ausg.: 1077-3118
SP  - 842
EP  - 844
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - http://dx.doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications
JF  - International Journal of Hydrogen Energy
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.ijhydene.2019.01.161
SN  - 0360-3199
VL  - 44
IS  - 13
SP  - 6978
EP  - 6990
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
A1  - Gudder, S.
A1  - Hagler, J.
T1  - An Uncertainty Relation for Joint Position-Momentum Measurements
JF  - Foundations of Physics Letters. 1 (1988), H. 3
Y1  - 1988
SN  - 1572-9524
SP  - 287
EP  - 292
ER  - 
TY  - JOUR
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures
JF  - Limit State of Materials and Structures : Direct Methods 2. Saxcé, Géry de (Hrsg.)
Y1  - 2013
SN  - 978-94-007-5424-9
SP  - 71
EP  - 87
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Cheenakula, Dheeraja
A1  - Hoffstadt, Kevin
A1  - Krafft, Simone
A1  - Reinecke, Diana
A1  - Klose, Holger
A1  - Kuperjans, Isabel
A1  - Grömping, Markus
T1  - Anaerobic digestion of algal–bacterial biomass of an Algal Turf Scrubber system
JF  - Biomass Conversion and Biorefinery
N2  - This study investigated the anaerobic digestion of an algal–bacterial biofilm grown in artificial wastewater in an Algal Turf Scrubber (ATS). The ATS system was located in a greenhouse (50°54′19ʺN, 6°24′55ʺE, Germany) and was exposed to seasonal conditions during the experiment period. The methane (CH4) potential of untreated algal–bacterial biofilm (UAB) and thermally pretreated biofilm (PAB) using different microbial inocula was determined by anaerobic batch fermentation. Methane productivity of UAB differed significantly between microbial inocula of digested wastepaper, a mixture of manure and maize silage, anaerobic sewage sludge, and percolated green waste. UAB using sewage sludge as inoculum showed the highest methane productivity. The share of methane in biogas was dependent on inoculum. Using PAB, a strong positive impact on methane productivity was identified for the digested wastepaper (116.4%) and a mixture of manure and maize silage (107.4%) inocula. By contrast, the methane yield was significantly reduced for the digested anaerobic sewage sludge (50.6%) and percolated green waste (43.5%) inocula. To further evaluate the potential of algal–bacterial biofilm for biogas production in wastewater treatment and biogas plants in a circular bioeconomy, scale-up calculations were conducted. It was found that a 0.116 km2 ATS would be required in an average municipal wastewater treatment plant which can be viewed as problematic in terms of space consumption. However, a substantial amount of energy surplus (4.7–12.5 MWh a−1) can be gained through the addition of algal–bacterial biomass to the anaerobic digester of a municipal wastewater treatment plant. Wastewater treatment and subsequent energy production through algae show dominancy over conventional technologies.
KW  - Biogas
KW  - Methane
KW  - Algal Turf Scrubber
KW  - Algal–bacterial bioflm
KW  - Circular bioeconomy
Y1  - 2022
U6  - http://dx.doi.org/10.1007/s13399-022-03236-z
SN  - 2190-6823
N1  - Corresponding author: Dheeraja Cheenakula
VL  - 13
SP  - 15 Seiten
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schuba, Marko
T1  - Analyse der Antwortzeit von zuverlässigen Multicast-Protokollen im Internet
JF  - Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]
Y1  - 1999
SP  - 1
EP  - 14
CY  - Braunschweig
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Johst, Sören
A1  - Gratz, Marcel
A1  - Völker, Maximilian N.
A1  - Kraff, Oliver
A1  - Abuelhaija, Ashraf
A1  - Fiedler, Thomas M.
A1  - Solbach, Klaus
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI
JF  - Frontiers in Physics
Y1  - 2017
U6  - http://dx.doi.org/10.3389/fphy.2017.00017
SN  - 2296-424X
N1  - Article number 17
VL  - 5
IS  - Jun
ER  - 
TY  - CHAP
A1  - Gedle, Yibekal
A1  - Schmitz, Mark
A1  - Gielen, Hans
A1  - Schmitz, Pascal
A1  - Herrmann, Ulf
A1  - Teixeira Boura, Cristiano José
A1  - Mahdi, Zahra
A1  - Caminos, Ricardo Alexander Chico
A1  - Dersch, Jürgen
T1  - Analysis of an integrated CSP-PV hybrid power plant
T2  - SolarPACES 2020
N2  - In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] – [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.
KW  - Hybrid energy system
KW  - Power plants
KW  - Electricity generation
KW  - Energy storage
KW  - Associated liquids
Y1  - 2022
SN  - 978-0-7354-4195-8
U6  - http://dx.doi.org/10.1063/5.0086236
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - 26th International Conference on Concentrating Solar Power and Chemical Energy Systems
28 September–2 October 2020
Freiburg, Germany
IS  - 2445 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Murib, Mohammed S.
A1  - Tran, Anh Quang
A1  - Ceuninck, Ward de
A1  - Schöning, Michael Josef
A1  - Nesladek, Milos
A1  - Serpengüzel, Ali
A1  - Wagner, Patrick
T1  - Analysis of an optical biosensor based on elastic light scattering from diamond-, glass-, and sapphire microspheres
JF  - Physica Status Solidi A
N2  - Deoxyribonucleic acid (DNA) and protein recognition are now standard tools in biology. In addition, the special optical properties of microsphere resonators expressed by the high quality factor (Q-factor) of whispering gallery modes (WGMs) or morphology dependent resonances (MDRs) have attracted the attention of the biophotonic community. Microsphere-based biosensors are considered as powerful candidates to achieve label-free recognition of single molecules due to the high sensitivity of their WGMs. When the microsphere surface is modified with biomolecules, the effective refractive index and the effective size of the microsphere change resulting in a resonant wavelength shift. The transverse electric (TE) and the transverse magnetic (TM) elastic light scattering intensity of electromagnetic waves at 600 and 1400 nm are numerically calculated for DNA and unspecific binding of proteins to the microsphere surface. The effect of changing the optical properties was studied for diamond (refractive index 2.34), glass (refractive index 1.50), and sapphire (refractive index 1.75) microspheres with a 50 µm radius. The mode spacing, the linewidth of WGMs, and the shift of resonant wavelength due to the change in radius and refractive index, were analyzed by numerical simulations. Preliminary results of unspecific binding of biomolecules are presented. The calculated shift in WGMs can be used for biomolecules detection.
Y1  - 2012
U6  - http://dx.doi.org/10.1002/pssa.201100795
SN  - 1862-6319
N1  - Special Issue: "Fundamentals and Applications of Diamond"
VL  - 209
IS  - 9
SP  - 1804
EP  - 1810
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Maurer, Florian
A1  - Rieke, Christian
A1  - Schemm, Ralf
A1  - Stollenwerk, Dominik
T1  - Analysis of an urban grid with high photovoltaic and e-mobility penetration
JF  - Energies
N2  - This study analyses the expected utilization of an urban distribution grid under high penetration of photovoltaic and e-mobility with charging infrastructure on a residential level. The grid utilization and the corresponding power flow are evaluated, while varying the control strategies and photovoltaic installed capacity in different scenarios. Four scenarios are used to analyze the impact of e-mobility. The individual mobility demand is modelled based on the largest German studies on mobility “Mobilität in Deutschland”, which is carried out every 5 years. To estimate the ramp-up of photovoltaic generation, a potential analysis of the roof surfaces in the supply area is carried out via an evaluation of an open solar potential study. The photovoltaic feed-in time series is derived individually for each installed system in a resolution of 15 min. The residential consumption is estimated using historical smart meter data, which are collected in London between 2012 and 2014. For a realistic charging demand, each residential household decides daily on the state of charge if their vehicle requires to be charged. The resulting charging time series depends on the underlying behavior scenario. Market prices and mobility demand are therefore used as scenario input parameters for a utility function based on the current state of charge to model individual behavior. The aggregated electricity demand is the starting point of the power flow calculation. The evaluation is carried out for an urban region with approximately 3100 residents. The analysis shows that increased penetration of photovoltaics combined with a flexible and adaptive charging strategy can maximize PV usage and reduce the need for congestion-related intervention by the grid operator by reducing the amount of kWh charged from the grid by 30% which reduces the average price of a charged kWh by 35% to 14 ct/kWh from 21.8 ct/kWh without PV optimization. The resulting grid congestions are managed by implementing an intelligent price or control signal. The analysis took place using data from a real German grid with 10 subgrids. The entire software can be adapted for the analysis of different distribution grids and is publicly available as an open-source software library on GitHub.
KW  - distribution grid simulation
KW  - smart-charging
KW  - e-mobility
Y1  - 2023
U6  - http://dx.doi.org/10.3390/en16083380
SN  - 1996-1073
N1  - This article belongs to the Special Issue "Advanced Solutions for the Efficient Integration of Electric Vehicles in Electricity Grids"
N1  - Corresponding author: Florian Maurer
VL  - 16
IS  - 8
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Wang, Ren-Qi
A1  - Druckenmüller, Katharina
A1  - Elbers, Gereon
A1  - Guenther, Klaus
A1  - Croué, Jean-Philippe
T1  - Analysis of aquatic-phase natural organic matter by optimized LDI-MS method
JF  - Journal of mass spectrometry
N2  - The composition and physiochemical properties of aquatic-phase natural organic matter (NOM) are most important problems for both environmental studies and water industry. Laser desorption/ionization (LDI) mass spectrometry facilitated successful examinations of NOM, as humic and fulvic acids in NOM are readily ionized by the nitrogen laser. In this study, hydrophobic NOMs (HPO NOMs) from river, reservoir and waste water were characterized by this technique. The effect of analytical variables like concentration, solvent composition and laser energy was investigated. The exact masses of small molecular NOM moieties in the range of 200–1200 m/z were determined in reflectron mode. In addition, spectra of post-source-decay experiments in this range showed that some compounds from different natural NOMs had the same fragmental ions. In the large mass range of 1200–15 000 Da, macromolecules and their aggregates were found in HPO NOMs from natural waters. Highly humic HPO exhibited mass peaks larger than 8000 Da. On the other hand, the waste water and reservoir water mainly had relatively smaller molecules of about 2000 Da. The LDI-MS measurements indicated that highly humic river waters were able to form large aggregates and membrane foulants, while the HPO NOMs from waste water and reservoir water were unlikely to form large aggregates. Copyright © 2014 John Wiley & Sons, Ltd.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/jms.3321
SN  - 1096-9888
VL  - 49
IS  - 2
SP  - 154
EP  - 160
PB  - Wiley
CY  - Bognor Regis
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Heiden, W.
A1  - Turek, M.
A1  - Schöning, Michael Josef
T1  - Analysis of chemical sensor data
JF  - Proceedings of the 4th Russian-German Workshop "Innovation Information Technologies: Theory and practice" : Ufa, Russia, April 8-13, 2011 / eds. Yupsova, Nafisa ...
Y1  - 2011
SN  - 978-5-4221-0159-7
SP  - 76
EP  - 81
PB  - State Aviation Technical Univ.
CY  - Ufa
ER  - 
TY  - CHAP
A1  - Dinghofer, Kai
A1  - Hartung, Frank
T1  - Analysis of Criteria for the Selection of Machine Learning Frameworks
T2  - 2020 International Conference on Computing, Networking and Communications (ICNC)
Y1  - 2020
U6  - http://dx.doi.org/10.1109/ICNC47757.2020.9049650
SP  - 373
EP  - 377
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Ghosch, S.
A1  - Baier, M.
A1  - Schütz, J.
A1  - Schneider, Felix
A1  - Scherer, Ulrich W.
T1  - Analysis of electronic autoradiographs by mathematical post-processing
JF  - Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology
N2  - Autoradiography is a well-established method of nuclear imaging. When different radionuclides are present simultaneously, additional processing is needed to distinguish distributions of radionuclides. In this work, a method is presented where aluminium absorbers of different thickness are used to produce images with different cut-off energies. By subtracting images pixel-by-pixel one can generate images representing certain ranges of β-particle energies. The method is applied to the measurement of irradiated reactor graphite samples containing several radionuclides to determine the spatial distribution of these radionuclides within pre-defined energy windows. The process was repeated under fixed parameters after thermal treatment of the samples. The greyscale images of the distribution after treatment were subtracted from the corresponding pre-treatment images. Significant changes in the intensity and distribution of radionuclides could be observed in some samples. Due to the thermal treatment parameters the most significant differences were observed in the ³H and ¹⁴C inventory and distribution.
Y1  - 2016
U6  - http://dx.doi.org/10.1080/10420150.2016.1155587
SN  - 1029-4953
VL  - 171
IS  - 1-2
SP  - 161
EP  - 172
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Schuba, Marko
T1  - Analysis of Feedback Error Control Schemes for Block Based Video Communication / Meggers, Jens ; Schuba, Marko
Y1  - 1999
ER  - 
TY  - JOUR
A1  - Biselli, Manfred
A1  - Klyushnichenko, Vadim
A1  - Rodenbrock, Anja
A1  - Thömmes, Jörg
T1  - Analysis of Hybridoma Cell Culture Processes by SDS-Gel Capillary Electrophoresis and matrix-assisted laser desorption ionization–time-of-flight MS / Vadim Klyushnichenko, Anja Rodenbrock, Jörg Thömmes, Maria-Regina Kula, Holger Heine, Manfred Biselli
JF  - Biotechnology and Applied Biochemistry. 27 (1998), H. 3
Y1  - 1998
SN  - 0885-4513
SP  - 181
EP  - 188
ER  - 
TY  - CHAP
A1  - Borggrafe, Andreas
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - Analysis of interplanetary solar sail trajectories with attitude dynamics
T2  - Dynamics and Control of Space Systems 2012
N2  - We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.
Y1  - 2012
SN  - 978-0-87703-587-9
SP  - 1553
EP  - 1569
PB  - Univelt Inc
CY  - San Diego
ER  - 
TY  - JOUR
A1  - Scherer, Ulrich W.
A1  - Santana, H. H. S.
A1  - Maier, G.
A1  - Rodenas, J.
T1  - Analysis of mechanical strength in ceramic pellets of nuclear fuel  / Santana, H. H. S. ; Maier, G. ; Scherer, U. W. ; Rodenas, J.
JF  - Radiation effects and defects in solids. 164 (2009), H. 5-6
Y1  - 2009
SN  - 1042-0150
SP  - 313
EP  - 318
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
A1  - Tran, Ich Thinh
T1  - Analysis of pressure equipment by application of the primal-dual theory of shakedown
JF  - Communications in Numerical Methods in Engineering. 23 (2007), H. 3
Y1  - 2007
SN  - 1069-8299
SP  - 213
EP  - 225
ER  - 
TY  - CHAP
A1  - Wulfhorst, H.
A1  - Duwe, A.
A1  - Möhring, S.
A1  - Jurca, O.
A1  - Tippkötter, Nils
T1  - Analysis of pretreated biomass by differential scanning 132 calorimetry and multivariate data analysis
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 132
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Peter, F.
A1  - Rüdiger, A.
A1  - Dittmann, R.
T1  - Analysis of shape effects on the piezoresponse in ferroelectric nanograins with and without adsorbates / Peter, F. ; Rüdiger, A. ; Dittmann, R. ; Waser, R. ; Szot, K. ; Reichenberg, B. ; Prume, K. ;
JF  - Applied Physics Letters  . 87 (2005), H. 8
Y1  - 2005
SN  - 0003-6951
SP  - 082901
EP  - 082901-3
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - http://dx.doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Levers, A.
A1  - Staat, Manfred
A1  - Laack, Walter van
T1  - Analysis of the long-term effect of the MBST® nuclear magnetic resonance therapy on gonarthrosis
JF  - Orthopedic Practice
Y1  - 2016
VL  - 47
IS  - 11
SP  - 521
EP  - 528
ER  - 
TY  - CHAP
A1  - Magnor, D.
A1  - Soltau, N.
A1  - Bragard, Michael
A1  - Schmiegel, A.
A1  - De Doncker, R. W.
A1  - Sauer, D. U.
ED  - de Santi, Giovanni Frederigo
T1  - Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system
T2  - Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention & Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference
Y1  - 2010
SN  - 3-936338-26-4  (DVD-ROM)
N1  - EU PVSEC WCPEC
PB  - WIP Renewable Energies
CY  - [München]
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - JOUR
A1  - Ayala, Rafael Ceja
A1  - Harris, Isaac
A1  - Kleefeld, Andreas
A1  - Pallikarakis, Nikolaos
T1  - Analysis of the transmission eigenvalue problem with two conductivity parameters
JF  - Applicable Analysis
N2  - In this paper, we provide an analytical study of the transmission eigenvalue problem with two conductivity parameters. We will assume that the underlying physical model is given by the scattering of a plane wave for an isotropic scatterer. In previous studies, this eigenvalue problem was analyzed with one conductive boundary parameter whereas we will consider the case of two parameters. We prove the existence and discreteness of the transmission eigenvalues as well as study the dependence on the physical parameters. We are able to prove monotonicity of the first transmission eigenvalue with respect to the parameters and consider the limiting procedure as the second boundary parameter vanishes. Lastly, we provide extensive numerical experiments to validate the theoretical work.
KW  - Transmission Eigenvalues
KW  - Conductive Boundary Condition
KW  - Inverse Scattering
Y1  - 2023
U6  - http://dx.doi.org/10.1080/00036811.2023.2181167
SN  - 0003-6811
PB  - Taylor & Francis
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  -