TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Heiden, W.
A1  - Turek, M.
A1  - Schöning, Michael Josef
T1  - Analysis of chemical sensor data
JF  - Proceedings of the 4th Russian-German Workshop "Innovation Information Technologies: Theory and practice" : Ufa, Russia, April 8-13, 2011 / eds. Yupsova, Nafisa ...
Y1  - 2011
SN  - 978-5-4221-0159-7
SP  - 76
EP  - 81
PB  - State Aviation Technical Univ.
CY  - Ufa
ER  - 
TY  - CHAP
A1  - Dinghofer, Kai
A1  - Hartung, Frank
T1  - Analysis of Criteria for the Selection of Machine Learning Frameworks
T2  - 2020 International Conference on Computing, Networking and Communications (ICNC)
Y1  - 2020
U6  - http://dx.doi.org/10.1109/ICNC47757.2020.9049650
SP  - 373
EP  - 377
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Ghosch, S.
A1  - Baier, M.
A1  - Schütz, J.
A1  - Schneider, Felix
A1  - Scherer, Ulrich W.
T1  - Analysis of electronic autoradiographs by mathematical post-processing
JF  - Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology
N2  - Autoradiography is a well-established method of nuclear imaging. When different radionuclides are present simultaneously, additional processing is needed to distinguish distributions of radionuclides. In this work, a method is presented where aluminium absorbers of different thickness are used to produce images with different cut-off energies. By subtracting images pixel-by-pixel one can generate images representing certain ranges of β-particle energies. The method is applied to the measurement of irradiated reactor graphite samples containing several radionuclides to determine the spatial distribution of these radionuclides within pre-defined energy windows. The process was repeated under fixed parameters after thermal treatment of the samples. The greyscale images of the distribution after treatment were subtracted from the corresponding pre-treatment images. Significant changes in the intensity and distribution of radionuclides could be observed in some samples. Due to the thermal treatment parameters the most significant differences were observed in the ³H and ¹⁴C inventory and distribution.
Y1  - 2016
U6  - http://dx.doi.org/10.1080/10420150.2016.1155587
SN  - 1029-4953
VL  - 171
IS  - 1-2
SP  - 161
EP  - 172
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Schuba, Marko
T1  - Analysis of Feedback Error Control Schemes for Block Based Video Communication / Meggers, Jens ; Schuba, Marko
Y1  - 1999
ER  - 
TY  - JOUR
A1  - Biselli, Manfred
A1  - Klyushnichenko, Vadim
A1  - Rodenbrock, Anja
A1  - Thömmes, Jörg
T1  - Analysis of Hybridoma Cell Culture Processes by SDS-Gel Capillary Electrophoresis and matrix-assisted laser desorption ionization–time-of-flight MS / Vadim Klyushnichenko, Anja Rodenbrock, Jörg Thömmes, Maria-Regina Kula, Holger Heine, Manfred Biselli
JF  - Biotechnology and Applied Biochemistry. 27 (1998), H. 3
Y1  - 1998
SN  - 0885-4513
SP  - 181
EP  - 188
ER  - 
TY  - CHAP
A1  - Borggrafe, Andreas
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - Analysis of interplanetary solar sail trajectories with attitude dynamics
T2  - Dynamics and Control of Space Systems 2012
N2  - We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.
Y1  - 2012
SN  - 978-0-87703-587-9
SP  - 1553
EP  - 1569
PB  - Univelt Inc
CY  - San Diego
ER  - 
TY  - JOUR
A1  - Scherer, Ulrich W.
A1  - Santana, H. H. S.
A1  - Maier, G.
A1  - Rodenas, J.
T1  - Analysis of mechanical strength in ceramic pellets of nuclear fuel  / Santana, H. H. S. ; Maier, G. ; Scherer, U. W. ; Rodenas, J.
JF  - Radiation effects and defects in solids. 164 (2009), H. 5-6
Y1  - 2009
SN  - 1042-0150
SP  - 313
EP  - 318
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
A1  - Tran, Ich Thinh
T1  - Analysis of pressure equipment by application of the primal-dual theory of shakedown
JF  - Communications in Numerical Methods in Engineering. 23 (2007), H. 3
Y1  - 2007
SN  - 1069-8299
SP  - 213
EP  - 225
ER  - 
TY  - CHAP
A1  - Wulfhorst, H.
A1  - Duwe, A.
A1  - Möhring, S.
A1  - Jurca, O.
A1  - Tippkötter, Nils
T1  - Analysis of pretreated biomass by differential scanning 132 calorimetry and multivariate data analysis
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 132
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Peter, F.
A1  - Rüdiger, A.
A1  - Dittmann, R.
T1  - Analysis of shape effects on the piezoresponse in ferroelectric nanograins with and without adsorbates / Peter, F. ; Rüdiger, A. ; Dittmann, R. ; Waser, R. ; Szot, K. ; Reichenberg, B. ; Prume, K. ;
JF  - Applied Physics Letters  . 87 (2005), H. 8
Y1  - 2005
SN  - 0003-6951
SP  - 082901
EP  - 082901-3
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - http://dx.doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Levers, A.
A1  - Staat, Manfred
A1  - Laack, Walter van
T1  - Analysis of the long-term effect of the MBST® nuclear magnetic resonance therapy on gonarthrosis
JF  - Orthopedic Practice
Y1  - 2016
VL  - 47
IS  - 11
SP  - 521
EP  - 528
ER  - 
TY  - CHAP
A1  - Magnor, D.
A1  - Soltau, N.
A1  - Bragard, Michael
A1  - Schmiegel, A.
A1  - De Doncker, R. W.
A1  - Sauer, D. U.
ED  - de Santi, Giovanni Frederigo
T1  - Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system
T2  - Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention & Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference
Y1  - 2010
SN  - 3-936338-26-4  (DVD-ROM)
N1  - EU PVSEC WCPEC
PB  - WIP Renewable Energies
CY  - [München]
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - JOUR
A1  - Ayala, Rafael Ceja
A1  - Harris, Isaac
A1  - Kleefeld, Andreas
A1  - Pallikarakis, Nikolaos
T1  - Analysis of the transmission eigenvalue problem with two conductivity parameters
JF  - Applicable Analysis
N2  - In this paper, we provide an analytical study of the transmission eigenvalue problem with two conductivity parameters. We will assume that the underlying physical model is given by the scattering of a plane wave for an isotropic scatterer. In previous studies, this eigenvalue problem was analyzed with one conductive boundary parameter whereas we will consider the case of two parameters. We prove the existence and discreteness of the transmission eigenvalues as well as study the dependence on the physical parameters. We are able to prove monotonicity of the first transmission eigenvalue with respect to the parameters and consider the limiting procedure as the second boundary parameter vanishes. Lastly, we provide extensive numerical experiments to validate the theoretical work.
KW  - Transmission Eigenvalues
KW  - Conductive Boundary Condition
KW  - Inverse Scattering
Y1  - 2023
U6  - http://dx.doi.org/10.1080/00036811.2023.2181167
SN  - 0003-6811
PB  - Taylor & Francis
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  - 
TY  - CHAP
A1  - Aringhoff, R.
A1  - Geyer, Michael
A1  - Herrmann, Ulf
A1  - Kistner, Rainer
A1  - Nava, P.
A1  - Osuna, R.
ED  - Steinfeld, Aldo
T1  - AndaSol : 50MW Solar Plants with 9 Hour Storage for Southern Spain
T2  - Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgenössische Technische Hochschule Zürich
Y1  - 2002
SN  - 3-9521409-3-7
SP  - 37
EP  - 42
PB  - Paul Scherrer Inst.
CY  - Villingen
ER  - 
TY  - JOUR
A1  - Mourzina, Y. G.
A1  - Ermelenko, Y. E.
A1  - Yoshinobu, T.
A1  - Vlasov, Y.
A1  - Iwasaki, H.
A1  - Schöning, Michael Josef
T1  - Anionselective light-addressable potentiometric sensors (LAPS) for the determination of nitrate and suphate ions
JF  - Sensors and Actuators B. 91 (2003), H. 1-3
Y1  - 2003
SN  - 0925-4005
SP  - 32
EP  - 38
ER  - 
TY  - JOUR
A1  - Barsov, S.
A1  - Bechstedt, U.
A1  - Hardt, Arno
T1  - ANKE, a new facility for medium energy hadron physics at COSY-Jülich / S. Barsov [u.a.]
JF  - Nuclear instruments and methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Vol. 462, iss. 3
Y1  - 2001
SN  - 0167-5087 (Print) ; 0168-9002 (E-journal)
SP  - 364
EP  - 381
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Darmo, J.
A1  - Dubecký, F.
A1  - Kordos, P.
T1  - Annealing characteristics of native defects in low-temperature-grown MBE GaAs / J. Darmo ; F. Dubecky ; P. Kordos ; A. Förster
JF  - Semiconducting and insulating materials 1996 : proceedings of the 9th Conference on Semiconducting and Insulating Materials (SIMC '9), April 29 - May 3, 1996, Toulouse, France / [IEEE]
Y1  - 1996
SN  - 0-7803-3095-1
N1  - 2. ISBN: 0-7803-3179-6 ; Conference on Semiconducting and Insulating Materials <9, 1996, Toulouse> ; Institute of Electrical and Electronics Engineers ; IEEE Cat. No.96CH35881
SP  - 67
EP  - ff.
CY  - Piscataway, NJ [u.a.]
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Darmo, J.
A1  - Dubecky, F.
A1  - Kordos, P.
T1  - Annealing effect on concentration of EL6-like deep-level state in low-temperature-grown molecular beam epitaxial GaAs. Darmo, J.; Dubecky, F.; Kordos, P.; Förster, A.
JF  - Applied Physics Letters. 72 (1998), H. 5
Y1  - 1998
SN  - 1077-3118
SP  - 590
EP  - 592
ER  - 
TY  - CHAP
A1  - Arndt, Tobias
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Galla, Oskar
A1  - Köse, Hakan
A1  - Schiffer, Stefan
A1  - Tschesche, Matteo
T1  - Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers
T2  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments
N2  - This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.
KW  - Datasets
KW  - Neural networks
KW  - Anomaly detection
KW  - Quality control
KW  - Process optimization
Y1  - 2023
SN  - 9798400700699
U6  - http://dx.doi.org/10.1145/3594806.3596558
N1  - PETRA '23: Proceedings of the 16th International Conference on Pervasive Technologies Related to Assistive Environments, Corfu Greece, July 5 - 7, 2023.
SP  - 535
EP  - 542
PB  - ACM
ER  - 
TY  - JOUR
A1  - Savitskaya, I.S.
A1  - Kistaubayeva, A.S.
A1  - Ignatova, L.V.
A1  - Digel, Ilya
T1  - Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells
JF  - Heliyon
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.heliyon.2019.e02592
SN  - 2405-8440
VL  - 5
IS  - 10
SP  - Artikelnummer e02592
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Bruning, Dennis
A1  - Saat, Jan
T1  - Applicability of Business Process Model Analysis Approaches – A Case Study in Financial Services Consulting
T2  - Wirtschaftsinformatik Proceedings 2013
Y1  - 2013
N1  - 11th International Conference on Wirtschaftsinformatik,
27th February – 01st March 2013, Leipzig, Germany
SP  - 1181
EP  - 1195
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schultze, J. W.
A1  - Schöning, Michael Josef
T1  - Application of a (bio-)chemical sensor (ISFET) for the detection of physical parameters in liquids
JF  - Electrochimica Acta. 48 (2003), H. 20-22
Y1  - 2003
SP  - 3289
EP  - 3297
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Nießner, R.
T1  - Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R. ; Helsper, C.
JF  - Journal of Aerosol Science. 16 (1985), H. 3
Y1  - 1985
SN  - 0021-8502
SP  - 201
EP  - 209
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Nießner, R.
A1  - Rönicke, G.
T1  - Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R.; Helsper, C.; Rönicke, G.
JF  - Aerosols : science, technology, and industr. applications of airborne particles ; proceedings of the 1. Internat. Aerosol Conference held Sept. 17-21, 1984, Minneapolis, Minn., U.S.A / ed.: Benjamin Y. H. Liu
Y1  - 1984
SN  - 0444009477
N1  - International Aerosol Conference ; (1, 1984, Minneapolis, Minn.)
SP  - 63
EP  - 66
PB  - Elsevier
CY  - New York [u.a.]
ER  - 
TY  - JOUR
A1  - Schmitz, Günter
A1  - Spicher, U.
A1  - Kollmeier, H.P.
T1  - Application of a New Optical-Fiber Technique for Flame Propagation Diagnostics in IC Engines
Y1  - 1988
N1  - SAE- Paper-No.: 881637, 1988 SAE International Fuels and Lubricants Meeting and Exposition, Portland, October 10-13, 1988
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Yazici, Y.
A1  - Selmer, Thorsten
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Application of a portable multi-analyte biosensor for organic acid determination in silage
JF  - Sensors
N2  - Multi-analyte biosensors may offer the opportunity to perform cost-effective and rapid analysis with reduced sample volume, as compared to electrochemical biosensing of each analyte individually. This work describes the development of an enzyme-based biosensor system for multi-parametric determination of four different organic acids. The biosensor array comprises five working electrodes for simultaneous sensing of ethanol, formate, d-lactate, and l-lactate, and an integrated counter electrode. Storage stability of the biosensor was evaluated under different conditions (stored at +4 °C in buffer solution and dry at −21 °C, +4 °C, and room temperature) over a period of 140 days. After repeated and regular application, the individual sensing electrodes exhibited the best stability when stored at −21 °C. Furthermore, measurements in silage samples (maize and sugarcane silage) were conducted with the portable biosensor system. Comparison with a conventional photometric technique demonstrated successful employment for rapid monitoring of complex media.
Y1  - 2018
U6  - http://dx.doi.org/10.3390/s18051470
SN  - 1424-8220
VL  - 18
IS  - 5
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Gehler, M.
A1  - Ober-Blöbaum, S.
A1  - Dachwald, Bernd
T1  - Application of discrete mechanics and optimal control to spacecraft in non-keplerian motion around small solar system bodies
T2  - Procceedings of the 60th International Astronautical Congress
N2  - Prolonged operations close to small solar system bodies require a sophisticated control logic to minimize propellant mass and maximize operational efficiency. A control logic based on Discrete Mechanics and Optimal Control (DMOC) is proposed and applied to both conventionally propelled and solar sail spacecraft operating at an arbitrarily shaped asteroid in the class of Itokawa. As an example, stand-off inertial hovering is considered, recently identified as a challenging part of the Marco Polo mission. The approach is easily extended to stand-off orbits. We show that DMOC is applicable to spacecraft control at small objects, in particular with regard to the fact that the changes in gravity are exploited by the algorithm to optimally control the spacecraft position. Furthermore, we provide some remarks on promising developments.
KW  - Spacecraft
Y1  - 2009
SN  - 978-161567908-9
N1  - 60th International Astronautical Congress 2009, IAC 2009; Daejeon; South Korea; 12 October 2009 through 16 October 2009
SP  - 1360
EP  - 1371
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Wolf, C. Roland
A1  - Kapelyukh, Yury
A1  - Scheer, Nico
A1  - Henderson, Colin J.
ED  - Wilson, Alan G. E.
T1  - Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs
N2  - The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.
Y1  - 2015
SN  - 978-1-78262-778-4
U6  - http://dx.doi.org/10.1039/9781782622376-00152
SP  - 152
EP  - 176
PB  - RSC Publ.
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Baade, A.
A1  - Emons, H.
A1  - Schöning, Michael Josef
T1  - Application of ISFET for pH measurements in rain droplets
JF  - Sensors and Actuators B. 76 (2001), H. 1-3
Y1  - 2001
SN  - 0925-4005
SP  - 634
EP  - 638
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Uto, Takahiro
A1  - Uchiyama, Yuta
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Application of Low NOx Micro-mix Hydrogen Combustion to 2MW Class Industrial Gas Turbine Combustor
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-129
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  - 
TY  - BOOK
A1  - Mertens, Josef
A1  - Velden, Alexander van der
A1  - Kelm, Roland
A1  - Kokan, David
T1  - Application of MDO to large subsonic transport aircraft
Y1  - 2000
N1  - Aerospace Sciences Meeting and Exhibit <38, 2000, Reno, NV> ; (AIAA Paper ; 00-0844)
PB  - American Institute of Aeronautics and Astronautics
CY  - Reston, Va.
ER  - 
TY  - BOOK
A1  - Havermann, Marc
A1  - Haertig, J.
A1  - Rey, C.
A1  - George, A.
T1  - Application of particle image velocimetry to high-speed supersonic flows in a shock tunnel : 11th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 8 - 11, 2002; Schwerpunkt 0 / Institut Franco-Allemand de Recherches de Saint-Louis. Havermann, M. ...
Y1  - 2002
N1  - Publication / Institut Franco-Allemand de Recherches de Saint-Louis ; 640
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Wittig, M.
A1  - Rütters, René
A1  - Bragard, Michael
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Application of RL in control systems using the example of a rotatory inverted pendulum
T2  - Tagungsband AALE 2024 : Fit für die Zukunft: praktische Lösungen für die industrielle Automation
N2  - In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.
KW  - Rotatory Inverted Pendulum
KW  - MPC
KW  - LQR
KW  - PPO
KW  - Reinforcement Learning
Y1  - 2024
SN  - 978-3-910103-02-3
U6  - http://dx.doi.org/10.33968/2024.53
N1  - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024.
(Tagungsband unter https://doi.org/10.33968/2024.29)
SP  - 241
EP  - 248
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - JOUR
A1  - Pieper, Martin
A1  - Klein, Peter
T1  - Application of simple, periodic homogenization techniques to non-linear heat conduction problems in non-periodic, porous media
JF  - Heat mass transfer
N2  - Often, detailed simulations of heat conduction in complicated, porous media have large runtimes. Then homogenization is a powerful tool to speed up the calculations by preserving accurate solutions at the same time. Unfortunately real structures are generally non-periodic, which requires unpractical, complicated homogenization techniques. We demonstrate in this paper, that the application of simple, periodic techniques to realistic media, that are just close to periodic, gives accurate, approximative solutions. In order to obtain effective parameters for the homogenized heat equation, we have to solve a so called “cell problem”. In contrast to periodic structures it is not trivial to determine a suitable unit cell, which represents a non-periodic media. To overcome this problem, we give a rule of thumb on how to choose a good cell. Finally we demonstrate the efficiency of our method for virtually generated foams as well as real foams and compare these results to periodic structures.
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s00231-011-0879-4
SN  - 0947-7411
VL  - 48
IS  - 2
SP  - 291
EP  - 300
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
ED  - Crookston, B.
ED  - Tullis, B.
T1  - Application of the optical flow method to velocity determination in hydraulic structure models
BT  - Session 11: Fish passage and shiplocks
T2  - Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016
Y1  - 2016
SN  - 978-1-884575-75-4
U6  - http://dx.doi.org/10.15142/T3150628160853
SP  - 223
EP  - 232
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Moritz, Werner
A1  - Finger, Friedhelm
A1  - Schöning, Michael Josef
ED  - Comini, Elisabetta
T1  - Application of thin-film amorphous silicon to chemical imaging
JF  - Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.
Y1  - 2006
SN  - 9781558998711
N1  - Materials Research Society symposia proceedings; v. 915
IS  - Paper 0910-A-20-01
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Iding, Hans
A1  - Siegert, Petra
A1  - Mesch, K.
A1  - Pohl, Martina
T1  - Application of α-keto acid decarboxylases in biotransformations
JF  - Biochimica et biophysica acta (BBA) - Protein structure and molecular enzymology
Y1  - 1998
SN  - 1879-2588 (E-Journal); 0167-4838 (Print)
VL  - Vol. 1385
IS  - Iss. 2
SP  - 307
EP  - 322
ER  -