TY  - JOUR
A1  - Staat, Manfred
T1  - Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material
N2  - Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto–plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.
KW  - Finite-Elemente-Methode
KW  - Einspielen <Werkstoff>
KW  - Basis Reduktion
KW  - konvexe Optimierung
KW  - FEM
KW  - Druckgeräte
KW  - Basis reduction
KW  - Convex optimization
KW  - FEM
KW  - Shakedown analysis
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Basis reduction technique for limit and shakedown problems
T2  - Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M.; Heitzer, M.
Y1  - 2003
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0001-2018112115
SN  - 3-00-010001-6
SP  - 1
EP  - 55
PB  - John von Neumann Institute for Computing (NIC)
CY  - Jülich
ER  - 
TY  - JOUR
A1  - Biselli, Manfred
A1  - Thömmes, J.
A1  - Kula, M.-R.
A1  - Wandrey, Christian
T1  - Batch kinetic data of hybridoma growth and productivity as a basis for the simulation of antibody production in various culture systems /  Thömmes, J. ; Biselli, M. ; Kula, M.-R. ; Wandrey, C.
JF  - Animal cell technology : products of today, prospects for tomorrow ; ESACT, European Society for Animal Cell Technology, the 12th meeting / Ed. R. E. Spier
Y1  - 1994
SN  - 0750618450
N1  - Meeting / European Society for Animal Cell Technology ; 12
SP  - 513
EP  - 517
PB  - Butterworth-Heinemann
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Buniatyan, V.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Aroutiounian, V. M.
A1  - Schöning, Michael Josef
T1  - BaxSr1-x TiO3/pc-Si heterojunction
JF  - Armenian journal of physics
Y1  - 2013
SN  - 1829-1171
VL  - 6
IS  - 4
SP  - 177
EP  - 187
PB  - National Academy of Sciences of Armenia
CY  - Yerevan
ER  - 
TY  - JOUR
A1  - Buniatyan, V.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Aroutiounian, V. M.
A1  - Schöning, Michael Josef
T1  - BaxSr1-x TiO3/pc-Si heterojunction capacitance
JF  - Armenian journal of physics
Y1  - 2013
SN  - 1829-1171
VL  - 6
IS  - 4
SP  - 188
EP  - 197
PB  - National Academy of Sciences of Armenia
CY  - Yerevan
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Rouvé, G.
T1  - Behaviour and maintenance of some old masonry gravity dams
JF  - Safety of dams : proceedings of the International Conference on Safety of Dams, Coimbra, 23-28 April 1984 / ed. by J. Laginha Serafim. - [Hauptbd.]
Y1  - 1984
SN  - 90-6191-522-8
N1  - International Conference on Safety of Dams <1984, Coimbra> ; ISBN Set: 90-6191-521-X
SP  - 101
EP  - 106
PB  - Rotterdam [u.a.]
CY  - Balkema
ER  - 
TY  - CHAP
A1  - Morandi, Paolo
A1  - Butenweg, Christoph
A1  - Breis, Khaled
A1  - Beyer, Katrin
A1  - Magenes, Guido
ED  - Arion, Christian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Behaviour factor q for the seismic design of URM buildings
T2  - The Third European Conference on Earthquake Engineering and Seismology September 4 – September 9, 2022, Bucharest
N2  - Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.
KW  - unreinforced masonry buildings
KW  - modern constructions
KW  - seismic design
KW  - linear elastic analysis;
KW  - behaviour factor q
Y1  - 2022
SN  - 978-973-100-533-1
SP  - 1184
EP  - 1194
ER  - 
TY  - JOUR
A1  - Gspandl, Stephan
A1  - Pill, Ingo
A1  - Reip, Michael
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - Belief Management for High-Level Robot Programs
JF  - Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh
Y1  - 2011
N1  - International Joint Conference on Artificial Intelligence ; (22 : ; 2011.07.16-22 : ; Barcelona, Spain) ; IJCAI ; (22 : ; 2011.07.16-22 : ; Barcelona, Spain)
SP  - 900
EP  - 905
ER  - 
TY  - JOUR
A1  - Rens, Gavin
A1  - Ferrein, Alexander
T1  - Belief-node condensation for online POMDP algorithms
N2  - Slightly extended version of the paper accepted at the Robotics and Artificial Intelligence Workshop, a special track of IEEE AFRICON-2013, held in Mauritius, 9-12 September 2013
Y1  - 2013
SP  - 1
EP  - 7
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Schulte-Tigges, Joschua
A1  - Förster, Marco
A1  - Nikolovski, Gjorgji
A1  - Reke, Michael
A1  - Ferrein, Alexander
A1  - Kaszner, Daniel
A1  - Matheis, Dominik
A1  - Walter, Thomas
T1  - Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments
JF  - Sensors
N2  - Abstract
In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.
KW  - Lidar
KW  - Benchmark
KW  - Self-driving
Y1  - 2022
U6  - http://dx.doi.org/10.3390/s22197146
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Sensor Fusion for Vehicles Navigation and Robotic Systems"
VL  - 22
IS  - 19
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Burger, René
A1  - Lindner, Simon
A1  - Rumpf, Jessica
A1  - Do, Xuan Tung
A1  - Diehl, Bernd W.K.
A1  - Rehahn, Matthias
A1  - Monakhova, Yulia
A1  - Schulze, Margit
T1  - Benchtop versus high field NMR: Comparable performance found for the molecular weight determination of lignin
JF  - Journal of Pharmaceutical and Biomedical Analysis
N2  - Lignin is a promising renewable biopolymer being investigated worldwide as an environmentally benign substitute of fossil-based aromatic compounds, e.g. for the use as an excipient with antioxidant and antimicrobial properties in drug delivery or even as active compound. For its successful implementation into process streams, a quick, easy, and reliable method is needed for its molecular weight determination. Here we present a method using 1H spectra of benchtop as well as conventional NMR systems in combination with multivariate data analysis, to determine lignin’s molecular weight (Mw and Mn) and polydispersity index (PDI). A set of 36 organosolv lignin samples (from Miscanthus x giganteus, Paulownia tomentosa and Silphium perfoliatum) was used for the calibration and cross validation, and 17 samples were used as external validation set. Validation errors between 5.6% and 12.9% were achieved for all parameters on all NMR devices (43, 60, 500 and 600 MHz). Surprisingly, no significant difference in the performance of the benchtop and high-field devices was found. This facilitates the application of this method for determining lignin’s molecular weight in an industrial environment because of the low maintenance expenditure, small footprint, ruggedness, and low cost of permanent magnet benchtop NMR systems.
KW  - NMR
KW  - PLS-regression
KW  - Molecular weight determination
KW  - Chemometrics
KW  - Biomass
Y1  - 2022
SN  - 0731-7085
U6  - http://dx.doi.org/10.1016/j.jpba.2022.114649
VL  - 212
IS  - Article number: 114649
PB  - Elsevier
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Iding, Hans
A1  - Dünnwald, Thomas
A1  - Greiner, Lasse
A1  - Liese, Andreas
A1  - Müller, Michael
A1  - Siegert, Petra
A1  - Grötzinger, Joachim
A1  - Demir, Ayhan S.
A1  - Pohl, Martina
T1  - Benzoylformate Decarboxylase from Pseudomonas putida as Stable Catalyst for the Synthesis of Chiral 2-Hydroxy Ketones
JF  - Chemistry - a European journal
Y1  - 2000
SN  - 1521-3765 (E-Journal); 0947-6539 (Print)
VL  - Vol. 6
IS  - Iss. 8
SP  - 1483
EP  - 1495
ER  - 
TY  - JOUR
A1  - Darmo, J.
A1  - Schäffer, F.
A1  - Förster, Arnold
A1  - Kordos, P.
T1  - Beryllium doped low-temperature-grown MBE GaAs: material for photomixing in the THz frequency range
JF  - ASDAM 2000 : conference proceedings / edited by Jozef Osvald ... [et al.]
Y1  - 2000
SN  - 0780359399
N1  - International Conference on Advanced Semiconductor Devices and Microsystems ; (3rd : ; 2000 : ; Smolenice, Slovakia)
SP  - 147
EP  - 150
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Mayer, Claudia
T1  - Between Resistance and Affirmation: Christa Wolf and German Unification
JF  - Canadian review of comparative literature : CRCL = Revue canadienne de littérature comparée / Canadian Comparative Literature Association. 22 (1995), H. 3-4
Y1  - 1995
SN  - 0319-051X
SP  - 813
EP  - 835
ER  - 
TY  - JOUR
A1  - Mayer, Claudia
T1  - Between Trans- and Interdisciplinarity. »Germanistik« and the Dialectic of Inclusion and Exclusion of the Other(s)
JF  - Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Brasília 22 - 30 August 1993. General ed. Neide de Faria.
Y1  - 1993
SN  - 85-230-0405-x
N1  - Band 2
SP  - 958
EP  - 966
PB  - Univ.
CY  - Brasilia
ER  - 
TY  - JOUR
A1  - Ziemons, Karl
A1  - Bruyndonckx, P.
A1  - Perez, J. M.
A1  - Pietrzyk, U.
A1  - Rato, P.
A1  - Tavernier, S.
T1  - Beyond ClearPET: Next Aims
JF  - 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008
N2  - The CRYSTAL CLEAR collaboration, in short CCC, is a consortium of 12 academic institutions, mainly from Europe, joining efforts in the area of developing instrumentation for nuclear medicine and medical imaging. In the framework of the CCC a high performance small animal PET system, called ClearPET, was developed by using new technologies in electronics and crystals in a phoswich arrangement combining two types of lutetium- based scintillator materials: LSO:Ce and LuYAP:Ce. Our next aim will be the development of hybrid image systems. Hybrid MR-PET imaging has many unique advantages for brain research. This has sparked a new research line within CCC for the development of novel MR-PET compatible technologies. MRI is not as sensitive as PET but PET has poorer spatial resolution than MRI. Two major advantages of PET are sensitivity and its ability to acquire metabolic information. To assess these innovations, the development of a 9.4T hybrid animal MR-PET scanner is proposed based on an existing 9.4T MR scanner that will be adapted to enable simultaneous acquisition of MR and PET data using cutting- edge technology for both MR and PET.
Y1  - 2008
SN  - 978-1-4244-2003-2
SP  - 1421
EP  - 1424
ER  - 
TY  - JOUR
A1  - Damrau, Karin
T1  - Beyond Solidity - Inventions, Spaces and Concepts for the Elements of Air and Water
JF  - Architectural design : AD. 69 (1999), H. 3-4
Y1  - 1999
SN  - 0003-8504
SP  - 22
EP  - 33
ER  - 
TY  - JOUR
A1  - Blome, Hans-Joachim
A1  - Priester, W.
T1  - Big Bounce in the very early Universe
JF  - Astronomy and Astrophysics. 250 (1991), H. 1
Y1  - 1991
SN  - 0004-6361
SP  - 43
EP  - 49
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Big Data Research - How to Structure the Changes of the Past Decade?
T2  - The Art of Structuring
N2  - In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.
Y1  - 2019
SN  - 978-3-030-06234-7
U6  - http://dx.doi.org/10.1007/978-3-030-06234-7_26
SP  - 271
EP  - 281
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Bechstedt, U.
A1  - Berg, Georg P. A.
A1  - Hacker, U.
A1  - Hardt, Arno
A1  - Hürlimann, W.
A1  - Maier, R.
A1  - Martin, S.
A1  - Meissburger, J.
A1  - Römer, J. G. M.
A1  - Possen, P. von
A1  - Sagefka, T.
T1  - BIG KARL and COSY
T2  - The art and science of magnet design. A Festschrift in honor of Klaus Halbach. Vol. 1
Y1  - 1995
SP  - 19
EP  - 28
PB  - Lawrence Berkeley Lab., Univ. of California
CY  - Berkeley, CA.
ER  - 
TY  - JOUR
A1  - Mansurov, Z.
A1  - Digel, Ilya
A1  - Biisenbaev, M.
A1  - Savistkaya, I.
A1  - Kistaubaeva, A.
A1  - Akimbekov, N.
A1  - Zhubanova, A.
T1  - Bio-composite material on the basis of carbonized rice husk in biomedicine and environmental applications
JF  - Eurasian Chemico-Technological Journal
Y1  - 2012
U6  - http://dx.doi.org/10.18321/ectj105
SN  - 2522-4867
VL  - 14
IS  - 2
SP  - 115
EP  - 131
PB  - Institute of Combustion Problems
CY  - Almaty
ER  - 
TY  - CHAP
A1  - Muffler, Kai
A1  - Poth, Sabastian
A1  - Sieker, Tim
A1  - Tippkötter, Nils
A1  - Ulber, Roland
A1  - Sell, Dieter
ED  - Moo-Young, Murray
T1  - Bio-feedstocks
T2  - Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology
Y1  - 2011
SN  - 978-0-444-53352-4
U6  - http://dx.doi.org/10.1016/B978-0-08-088504-9.00088-X
SP  - 93
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ET  - 2. edition
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Creutz, Till
A1  - Firat, Ipek Seda
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments
JF  - Polymers
N2  - Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3–4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.
Y1  - 2022
SN  - 2073-4360
VL  - 14
IS  - 11
SP  - 2213
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Thomessen, Karolin
A1  - Thoma, Andreas
A1  - Braun, Carsten
T1  - Bio-inspired altitude changing extension to the 3DVFH* local obstacle avoidance algorithm
JF  - CEAS Aeronautical Journal
N2  - Obstacle avoidance is critical for unmanned aerial vehicles (UAVs) operating autonomously. Obstacle avoidance algorithms either rely on global environment data or local sensor data. Local path planners react to unforeseen objects and plan purely on local sensor information. Similarly, animals need to find feasible paths based on local information about their surroundings. Therefore, their behavior is a valuable source of inspiration for path planning. Bumblebees tend to fly vertically over far-away obstacles and horizontally around close ones, implying two zones for different flight strategies depending on the distance to obstacles. This work enhances the local path planner 3DVFH* with this bio-inspired strategy. The algorithm alters the goal-driven function of the 3DVFH* to climb-preferring if obstacles are far away. Prior experiments with bumblebees led to two definitions of flight zone limits depending on the distance to obstacles, leading to two algorithm variants. Both variants reduce the probability of not reaching the goal of a 3DVFH* implementation in Matlab/Simulink. The best variant, 3DVFH*b-b, reduces this probability from 70.7 to 18.6% in city-like worlds using a strong vertical evasion strategy. Energy consumption is higher, and flight paths are longer compared to the algorithm version with pronounced horizontal evasion tendency. A parameter study analyzes the effect of different weighting factors in the cost function. The best parameter combination shows a failure probability of 6.9% in city-like worlds and reduces energy consumption by 28%. Our findings demonstrate the potential of bio-inspired approaches for improving the performance of local path planning algorithms for UAV.
KW  - UAV
KW  - Obstacle avoidance
KW  - Autonomy
KW  - Local path planning
Y1  - 2023
U6  - http://dx.doi.org/10.1007/s13272-023-00691-w
SN  - 1869-5590 (Online)
SN  - 1869-5582 (Print)
N1  - Corresponding author: Karolin Thomessen
PB  - Springer
CY  - Wien
ER  - 
TY  - JOUR
A1  - Kramer, Friederike
A1  - Halamkova, Lenka
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
A1  - Halamek, Jan
T1  - Biocatalytic analysis of biomarkers for forensic identification of ethnicity between Caucasian and African American
JF  - The analyst. August 2013
Y1  - 2013
SN  - 1364-5528 (E-Journal); 0003-2654 (Print)
VL  - Vol. 138
SP  - 6251
EP  - 6257
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Netz, Daili Jacqueline Aguilar
A1  - Pohl, Regula
A1  - Beck-Sickinger, Annette G.
T1  - Biochemical characterisation and genetic analysis of aureocin A53, a new, atypical bacteriocin from Staphylococcus aureus / Netz, Daili Jacqueline Aguilar ; Pohl, Regula ; Beck-Sickinger, Annette G. ; Selmer, Thorsten ; Pierik, Antonio J. ;  Carmo de Frei
JF  - Journal of Molecular Biology. 319 (2002), H. 3
Y1  - 2002
SN  - 0022-2836
SP  - 745
EP  - 756
ER  - 
TY  - JOUR
A1  - Falkenberg, Fabian
A1  - Kohn, Sophie
A1  - Bott, Michael
A1  - Bongaerts, Johannes
A1  - Siegert, Petra
T1  - Biochemical characterisation of a novel broad pH spectrum subtilisin from Fictibacillus arsenicus DSM 15822ᵀ
JF  - FEBS Open Bio
N2  - Subtilisins from microbial sources, especially from the Bacillaceae family, are of particular interest for biotechnological applications and serve the currently growing enzyme market as efficient and novel biocatalysts. Biotechnological applications include use in detergents, cosmetics, leather processing, wastewater treatment and pharmaceuticals. To identify a possible candidate for the enzyme market, here we cloned the gene of the subtilisin SPFA from Fictibacillus arsenicus DSM 15822ᵀ (obtained through a data mining-based search) and expressed it in Bacillus subtilis DB104. After production and purification, the protease showed a molecular mass of 27.57 kDa and a pI of 5.8. SPFA displayed hydrolytic activity at a temperature optimum of 80 °C and a very broad pH optimum between 8.5 and 11.5, with high activity up to pH 12.5. SPFA displayed no NaCl dependence but a high NaCl tolerance, with decreasing activity up to concentrations of 5 m NaCl. The stability enhanced with increasing NaCl concentration. Based on its substrate preference for 10 synthetic peptide 4-nitroanilide substrates with three or four amino acids and its phylogenetic classification, SPFA can be assigned to the subgroup of true subtilisins. Moreover, SPFA exhibited high tolerance to 5% (w/v) SDS and 5% H₂O₂ (v/v). The biochemical properties of SPFA, especially its tolerance of remarkably high pH, SDS and H₂O₂, suggest it has potential for biotechnological applications.
KW  - Bacillaceae
KW  - Biotechnological application
KW  - Broad pH spectrum
KW  - Subtilases
KW  - Subtilisin
Y1  - 2023
U6  - http://dx.doi.org/10.1002/2211-5463.13701
SN  - 2211-5463
N1  - Corresponding author: Petra Siegert
VL  - 13
IS  - 11
SP  - 2035
EP  - 2046
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Falkenberg, Fabian
A1  - Rahba, Jade
A1  - Fischer, David
A1  - Bott, Michael
A1  - Bongaerts, Johannes
A1  - Siegert, Petra
T1  - Biochemical characterization of a novel oxidatively stable, halotolerant, and high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T
JF  - FEBS Open Bio
N2  - Halophilic and halotolerant microorganisms represent a promising source of salt-tolerant enzymes suitable for various biotechnological applications where high salt concentrations would otherwise limit enzymatic activity. Considering the current growing enzyme market and the need for more efficient and new biocatalysts, the present study aimed at the characterization of a high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T. The protease gene was cloned and expressed in Bacillus subtilis DB104. The recombinant protease SPAO with 269 amino acids belongs to the subfamily of high-alkaline subtilisins. The biochemical characteristics of purified SPAO were analyzed in comparison with subtilisin Carlsberg, Savinase, and BPN'. SPAO, a monomer with a molecular mass of 27.1 kDa, was active over a wide range of pH 6.0–12.0 and temperature 20–80 °C, optimally at pH 9.0–9.5 and 55 °C. The protease is highly oxidatively stable to hydrogen peroxide and retained 58% of residual activity when incubated at 10 °C with 5% (v/v) H2O2 for 1 h while stimulated at 1% (v/v) H2O2. Furthermore, SPAO was very stable and active at NaCl concentrations up to 5.0 m. This study demonstrates the potential of SPAO for biotechnological applications in the future.
KW  - Alkalihalobacillus okhensis
KW  - detergent protease
KW  - halotolerant protease
KW  - high-alkaline subtilisin
KW  - oxidative stable protease
Y1  - 2022
U6  - http://dx.doi.org/10.1002/2211-5463.13457
SN  - 2211-5463
N1  - Corresponding author: Petra Siegert
VL  - 12
IS  - 10
SP  - 1729
EP  - 1746
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Lüth, H.
A1  - Thust, M.
A1  - Steffen, A.
A1  - Kordos, P.
A1  - Schöning, Michael Josef
T1  - Biochemical sensors with structured and porous silicon capacitors
JF  - Materials Science and Engineering B. 69-70 (2000)
Y1  - 2000
SN  - 0921-5107
SP  - 104
EP  - 108
ER  - 
TY  - JOUR
A1  - Akimbekov, N. S.
A1  - Digel, Ilya
A1  - Tastambek, K. T.
A1  - Zhubanova, A. A.
T1  - Biocompatibility of carbonized rice husk with a rat heart cells line H9c2
JF  - Experimental Biology
Y1  - 2013
SN  - 1563-0218
N1  - Original in russischer Sprache
VL  - 59
IS  - 3/1
SP  - 23
EP  - 25
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair A.
A1  - Jandosov, Jakpar
A1  - Chenchik, D.
A1  - Azat, Seitkhan
A1  - Savitskaya, Irina S.
A1  - Kistaubaeva, Aida
A1  - Akimbekov, Nuraly
A1  - Digel, Ilya
A1  - Zhubanova, Azhar Achmet
T1  - Biocomposite Materials Based on Carbonized Rice Husk in Biomedicine and Environmental Applications
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - This chapter describes the prospects for biomedical and environmental engineering applications of heterogeneous materials based on nanostructured carbonized rice husk. Efforts in engineering enzymology are focused on the following directions: development and optimization of immobilization methods leading to novel biotechnological and biomedical applications; construction of biocomposite materials based on individual enzymes, multi-enzyme complexes and whole cells, targeted on realization of specific industrial processes. Molecular biological and biochemical studies on cell adhesion focus predominantly on identification, isolation and structural analysis of attachment-responsible biological molecules and their genetic determinants. The chapter provides a short overview of applications of the biocomposite materials based of nanostructured carbonized adsorbents. It emphasizes that further studies and better understanding of the interactions between CNS and microbial cells are necessary. The future use of living cells as biocatalysts, especially in the environmental field, needs more systematic investigations of the microbial adsorption phenomenon.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - http://dx.doi.org/10.1201/9780429428647-2
SP  - 3
EP  - 32
PB  - Jenny Stanford Publishing Pte. Ltd.
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Schütz, S.
A1  - Ecken, H.
A1  - Yoshinobu, T.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices
JF  - Lecture Notes of the ICB Seminars
Y1  - 2002
SP  - 28
EP  - 42
PB  - MCB
CY  - Warsaw
ER  - 
TY  - JOUR
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Schütz, S.
A1  - Ecken, H.
A1  - Yoshinobu, T.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices
JF  - Biocybernetics and Biomedical Engineering. 21 (2001), H. 3
Y1  - 2001
SN  - 0208-5216
SP  - 27
EP  - 42
ER  - 
TY  - BOOK
A1  - Artmann, Gerhard
T1  - Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)
Y1  - 2008
SN  - 978-3-540-75408-4
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
T1  - BioFEDs (field-effect devices) : State-of-the-art and new directions
JF  - Electroanalysis
Y1  - 2006
U6  - http://dx.doi.org/10.1002/elan.200603609
SN  - 1521-4109
VL  - 18
IS  - 19-20
SP  - 1893
EP  - 1900
ER  - 
TY  - GEN
A1  - Eickmann, Matthias
A1  - Esch, Thomas
A1  - Funke, Harald
A1  - Abanteriba, Sylvester
A1  - Roosen, Petra
T1  - Biofuels in Aviation – Safety Implications of Bio-Ethanol Usage in General Aviation Aircraft
N2  - Up in the clouds and above fuels and construction materials must be very carefully selected to ensure a smooth flight and touchdown. Out of around 38,000 single and dual-engined propeller aeroplanes, roughly a third are affected by a new trend in the fuel sector that may lead to operating troubles or even emergency landings: The admixture of bio-ethanol to conventional gasoline. Experiences with these fuels may be projected to alternative mixtures containing new components.
Y1  - 2014
N1  - 2. International Conference of the Cluster of Excellence Tailor-Made Fuels from Biomass, Aachen 2013
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Rieke, C.
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Biogas Production Modelling : A Control System Engineering Approach
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012008
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
SP  - 012008/1
EP  - 012008/4
ER  - 
TY  - CHAP
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Krafft, Simone
A1  - Kuperjans, Isabel
A1  - Elbers, Gereon
A1  - Selmer, Thorsten
T1  - Biogas Production on Demand Regulated by Butyric Acid Addition
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012009
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
VL  - 32
SP  - 012009/1
EP  - 012009/4
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
T1  - Biogas systems: basics, biogas multifunction, principle of fermentation and hybrid application with a solar tower for the treatment of waste animal manure
JF  - Journal of Engineering Science and Technology Review
N2  - Two of the main environmental problems of today’s society are the continuously increasing production of organic wastes as well as the increase of carbon dioxide in the atmosphere and the related green house effect. A way to solve these problems is the production of biogas. Biogas is a combustible gas consisting of methane, carbon dioxide and small amounts of other gases and trace elements. Production of biogas through anaerobic digestion of animal manure and slurries as well as of a wide range of digestible organic wastes and agricultural residues, converts these substrates into electricity and heat and offers a natural fertiliser for agriculture. The microbiological process of decomposition of organic matter, in the absence of oxygen takes place in reactors, called digesters. Biogas can be used as a fuel in a gas turbine or burner and can be used in a hybrid solar tower system offering a solution for waste treatment of agricultural and animal residues. A solar tower system consists of a heliostat field, which concentrates direct solar irradiation on an open volumetric central receiver. The receiver heats up ambient air to temperatures of around 700°C. The hot air’s heat energy is transferred to a steam Rankine cycle in a heat recovery steam generator (HRSG). The steam drives a steam turbine, which in turn drives a generator for producing electricity. In order to increase the operational hours of a solar tower power plant, a heat storage system and/ or hybridization may be considered. The advantage of solar-fossil hybrid power plants, compared to solar-only systems, lies in low additional investment costs due to an adaptable solar share and reduced technical and economical risks. On sunny days the hybrid system operates in a solar-only mode with the central receiver and on cloudy days and at night with the gas turbine only. As an alternative to methane gas, environmentally neutral biogas can be used for operating the gas turbine. Hence, the hybrid system is operated to 100% from renewable energy sources
Y1  - 2012
SN  - 1791-2377
N1  - Special Issue on Renewable Energy Systems
VL  - 5
IS  - 4
SP  - 48
EP  - 55
ER  - 
TY  - JOUR
A1  - Esch, Thomas
A1  - Funke, Harald
A1  - Roosen, Peter
A1  - Jarolimek, Ulrich
T1  - Biogenic Vehicle Fuels in General Aviation Aircrafts
JF  - MTZ worldwide. 72 (2011), H. 1
Y1  - 2011
N1  - recherchierbar für Angehörige der FH Aachen
SP  - 38
EP  - 43
PB  - Springer Automotive Media
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Maggakis-Kelemen, C.
A1  - Bork, M.
A1  - Kayser, Peter
A1  - Biselli, Manfred
A1  - Artmann, Gerhard
T1  - Biological and mechanical quality of red blood cells cultured from human umbilical cord blood stem cells
JF  - Medical and biological engineering and computing. 41 (2003), H. 3
Y1  - 2003
SN  - 0140-0118
SP  - 350
EP  - 356
ER  - 
TY  - BOOK
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
ED  - Artmann, Gerhard
ED  - Temiz Artmann, Aysegül
ED  - Zhubanova, Azhar A.
ED  - Digel, Ilya
T1  - Biological, physical and technical basics of cell engineering
Y1  - 2018
SN  - 978-981-10-7903-0
PB  - Springer
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
T1  - Biomass technology and bio-fuels: Heating/cooling and power
T2  - Renewable energy systems : theory, innovations, and intelligent applications / eds.: Socrates Kaplanis and Eleni Kaplani
Y1  - 2013
SN  - 9781624177415
SP  - 501
EP  - 523
PB  - Nova Science Publ.
CY  - Hauppauge, NY
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Koshitz, I. N.
A1  - Svetlowa, O. V.
A1  - Makarov, F. N.
T1  - Biomechanical analysis of traditional and contemporary conceptions on pathogenesis of the primary open angle glaucoma / Koshitz, I. N. ; Svetlova, O. V. ; Kotliar, K. E. ; Makarov, F. N. ;  Smolnikov, B. A.
JF  - Glaukoma (2005)
Y1  - 2005
N1  - Original in Russisch
SP  - 41
EP  - 63
PB  - -
ER  - 
TY  - JOUR
A1  - Horbach, Andreas
A1  - Staat, Manfred
A1  - Perez-Viana, Daniel
A1  - Simmen, Hans-Peter
A1  - Neuhaus, Valentin
A1  - Pape, Hans-Christoph
A1  - Prescher, Andreas
A1  - Ciritsis, Bernhard
T1  - Biomechanical in vitro examination of a standardized low-volume tubular femoroplasty
JF  - Clinical Biomechanics
N2  - Background
Osteoporosis is associated with the risk of fractures near the hip. Age and comorbidities increase the perioperative risk. Due to the ageing population, fracture of the proximal femur also proves to be a socio-economic problem. Preventive surgical measures have hardly been used so far.

Methods
10 pairs of human femora from fresh cadavers were divided into control and low-volume femoroplasty groups and subjected to a Hayes fall-loading fracture test. The results of the respective localization and classification of the fracture site, the Singh index determined by computed tomography (CT) examination and the parameters in terms of fracture force, work to fracture and stiffness were evaluated statistically and with the finite element method. In addition, a finite element parametric study with different position angles and variants of the tubular geometry of the femoroplasty was performed.

Findings
Compared to the control group, the work to fracture could be increased by 33.2%. The fracture force increased by 19.9%. The used technique and instrumentation proved to be standardized and reproducible with an average poly(methyl methacrylate) volume of 10.5 ml. The parametric study showed the best results for the selected angle and geometry.

Interpretation
The cadaver studies demonstrated the biomechanical efficacy of the low-volume tubular femoroplasty. The numerical calculations confirmed the optimal choice of positioning as well as the inner and outer diameter of the tube in this setting. The standardized minimally invasive technique with the instruments developed for it could be used in further comparative studies to confirm the measured biomechanical results.
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.clinbiomech.2020.105104
VL  - 80
IS  - Art. 105104
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie Lucina
A1  - Uschok, Stephan
A1  - Wegmann, Kilian
A1  - Müller, Lars-P.
A1  - Staat, Manfred
T1  - Biomechanical multibody model with refined kinematics of the elbow
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - The overall objective of this study is to develop a new external fixator, which closely maps the native kinematics of the elbow to decrease the joint force resulting in reduced rehabilitation time and pain. An experimental setup was designed to determine the native kinematics of the elbow during flexion of cadaveric arms. As a preliminary study, data from literature was used to modify a published biomechanical model for the calculation of the joint and muscle forces. They were compared to the original model and the effect of the kinematic refinement was evaluated. Furthermore, the obtained muscle forces were determined in order to apply them in the experimental setup. The joint forces in the modified model differed slightly from the forces in the original model. The muscle force curves changed particularly for small flexion angles but their magnitude for larger angles was consistent.
Y1  - 2018
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Svetlova, O. V.
A1  - Sourjikov, A. V.
A1  - Zaseeva, M. V.
T1  - Biomechanical peculiarities of aqueous humor production system and outflow regulation system / Svetlova, O. V. ; Sourjikov, A. V. ; Kotliar, K. E. ; Zaseeva, M. V. ; Shukhaev, S. V. ; Koshitz, I. N.
JF  - Glaukoma (2004)
Y1  - 2004
N1  - Original in Russisch
SP  - 66
EP  - 76
PB  - -
ER  - 
TY  - CHAP
A1  - Jabbari, Medisa
A1  - Bhattarai, Aroj
A1  - Anding, Ralf
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Biomechanical simulation of different prosthetic meshes for repairing uterine/vaginal vault prolapse
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 118
EP  - 119
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Svetlova, O. V.
A1  - Stegaev, V. A.
A1  - Parkhomov, S. D.
T1  - Biomechanical substantiation of relatively low efficiency of recurrent laser trabeculoplasty / Svetlova, O. V. ; Stagaev, V. A. ; Parkhomov, S. D. ; Kotliar, K. E. ; Makarov, F. N. ;  Smolnikov, B. A. ; Koshitz, I. N.
JF  - Glaukoma (2004)
Y1  - 2004
N1  - Original in Russisch
SP  - 29
EP  - 39
PB  - -
ER  -