TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Lüth, H.
T1  - Novel concepts for silicon-based biosensors
JF  - Physica Status Solidi (A) (2001)
Y1  - 2001
SN  - 0031-8965
SP  - 65
EP  - 77
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Berndsen, Lars
A1  - Lüth, Hans
A1  - Schöning, Michael Josef
T1  - Novel concepts for flow-rate and flow-direction determination by means of pH-sensitive ISFETs
JF  - Proceedings of SPIE. 4560 (2001)
Y1  - 2001
SP  - 19
EP  - 27
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, Ko-ichiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Novel combination of digital light processing (DLP) and light-addressable potentiometric sensors (LAPS) for flexible chemical imaging
JF  - Procedia Engineering. 5 (2010)
Y1  - 2010
SN  - 1877-7058
N1  - Eurosensor XXIV Conference
SP  - 520
EP  - 523
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
T1  - Novel approaches to design siliconbased field-effect sensors
JF  - Electrochemical Microsystem Technologies, New Trends in Electrochemistry Vol. 2
Y1  - 2002
SP  - 384
EP  - 408
PB  - Taylor & Francis
CY  - London New York
ER  - 
TY  - JOUR
A1  - Karschuck, T. L.
A1  - Filipov, Y.
A1  - Bollella, P.
A1  - Schöning, Michael Josef
A1  - Katz, E.
T1  - Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction
JF  - International Journal of Unconventional Computing
N2  - Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular “toolbox” as a new example of Boolean logic gates based on enzyme reactions.
Y1  - 2019
SN  - 1548-7199
VL  - 14
IS  - 3-4
SP  - 235
EP  - 242
PB  - Old City Publishing
CY  - Philadelphia
ER  - 
TY  - JOUR
A1  - Arida, Hassan A.
A1  - Al-haddad, Ameera
A1  - Schöning, Michael Josef
T1  - New Solid-State Organic Membrane Based Lead-Selective Micro-Electrode
JF  - International Journal of Electrochemical Science. 6 (2011), H. 9
Y1  - 2011
SN  - 1452-3981
SP  - 3858
EP  - 3867
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - New concepts of miniaturised reference electrodes in silicon technology for potentiometric sensor systems
JF  - Sensors and Actuators B. 103 (2004), H. 1-2
Y1  - 2004
SN  - 0925-4005
SP  - 429
EP  - 435
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia>  ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW  - Biosensor
KW  - Nanotechnologie
KW  - Nanomaterial
KW  - Nano Materials
KW  - Bio-Sensors
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Weiland, Maryam
A1  - Schöning, Michael Josef
ED  - Lvova, Larisa
ED  - Kirsanov, Dmitry
ED  - di Natale, Corrado
ED  - Legin, Audrey
T1  - Nanoplate field-effect capacitors: a new transducer structure for multiparameter (bio-)chemical sensing
T2  - Multisensor system for chemical analysis : materials and sensors
N2  - An array of electrically isolated nanoplate field-effect silicon-on-insulator (SOI) capacitors as a new transducer structure for multiparameter (bio-)chemical sensing is presented. The proposed approach allows addressable biasing and electrical readout of multiple nanoplate field-effect capacitive (bio-)chemical sensors on the same SOI chip, as well as differential-mode measurements. The realized sensor chip has been applied for pH and penicillin concentration measurements, electrical monitoring of polyelectrolyte multilayer formation, and the label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization and denaturation events.
Y1  - 2014
SN  - 978-981-4411-15-8 ; 978-981-4411-16-5
U6  - http://dx.doi.org/10.1201/b15491-11
SP  - 333
EP  - 373
PB  - Jenny Stanford Publishing
CY  - Singapore
ET  - 1
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Ingebrandt, S.
A1  - Poghossian, Arshak
A1  - Zhang, Y.
A1  - Vu, X. T.
A1  - Moritz, W.
A1  - Schöning, Michael Josef
T1  - Nanoplate field-effect capacitive (bio-)chemical sensor array based on SOI structure
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 670
EP  - 673
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Nanomaterial-Modified Capacitive Field-Effect Biosensors
T2  - Springer Series on Chemical Sensors and Biosensors (Methods and Applications)
N2  - The coupling of charged molecules, nanoparticles, and more generally, inorganic/organic nanohybrids with semiconductor field-effect devices based on an electrolyte–insulator–semiconductor (EIS) system represents a very promising strategy for the active tuning of electrochemical properties of these devices and, thus, opening new opportunities for label-free biosensing by the intrinsic charge of molecules. The simplest field-effect sensor is a capacitive EIS sensor, which represents a (bio-)chemically sensitive capacitor. In this chapter, selected examples of recent developments in the field of label-free biosensing using nanomaterial-modified capacitive EIS sensors are summarized. In the first part, we present applications of EIS sensors modified with negatively charged gold nanoparticles for the label-free electrostatic detection of positively charged small proteins and macromolecules, for monitoring the layer-by-layer formation of oppositely charged polyelectrolyte (PE) multilayers as well as for the development of an enzyme-based biomolecular logic gate. In the second part, examples of a label-free detection by means of EIS sensors modified with a positively charged weak PE layer are demonstrated. These include electrical detection of on-chip and in-solution hybridized DNA (deoxyribonucleic acid) as well as an EIS sensor with pH-responsive weak PE/enzyme multilayers for enhanced field-effect biosensing.
KW  - Biomolecular logic gate
KW  - DNA
KW  - Enzyme biosensor
KW  - Field-effect sensor
KW  - Gold nanoparticle
Y1  - 2017
U6  - http://dx.doi.org/10.1007/5346_2017_2
SP  - 1
EP  - 25
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - JOUR
A1  - Morais, Paulo V.
A1  - Gomes, Vanderley F., Jr.
A1  - Silva, Anielle C. A.
A1  - Dantas, Noelio O.
A1  - Schöning, Michael Josef
A1  - Siqueira, José R., Jr.
T1  - Nanofilm of ZnO nanocrystals/carbon nanotubes as biocompatible layer for enzymatic biosensors in capacitive field-effect devices
JF  - Journal of Materials Science
N2  - The incorporation of nanomaterials that are biocompatible with different types of biological compounds has allowed the development of a new generation of biosensors applied especially in the biomedical field. In particular, the integration of film-based nanomaterials employed in field-effect devices can be interesting to develop biosensors with enhanced properties. In this paper, we studied the fabrication of sensitive nanofilms combining ZnO nanocrystals and carbon nanotubes (CNTs), prepared by means of the layer-by-layer (LbL) technique, in a capacitive electrolyte-insulator-semiconductor (EIS) structure for detecting glucose and urea. The ZnO nanocrystals were incorporated in a polymeric matrix of poly(allylamine) hydrochloride (PAH), and arranged with multi-walled CNTs in a LbL PAH-ZnO/CNTs film architecture onto EIS chips. The electrochemical characterizations were performed by capacitance–voltage and constant capacitance measurements, while the morphology of the films was characterized by atomic force microscopy. The enzymes glucose oxidase and urease were immobilized on film’s surface for detection of glucose and urea, respectively. In order to obtain glucose and urea biosensors with optimized amount of sensitive films, we investigated the ideal number of bilayers for each detection system. The glucose biosensor showed better sensitivity and output signal for an LbL PAH-ZnO/CNTs nanofilm with 10 bilayers. On the other hand, the urea biosensor presented enhanced properties even for the first bilayer, exhibiting high sensitivity and output signal. The presence of the LbL PAH-ZnO/CNTs films led to biosensors with better sensitivity and enhanced response signal, demonstrating that the adequate use of nanostructured films is feasible for proof-of-concept biosensors with improved properties that may be employed for biomedical applications.
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s10853-017-1369-y
SN  - 1573-4803
VL  - 52
IS  - 20
SP  - 12314
EP  - 12325
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Razavi, A.
A1  - Bäcker, Matthias
A1  - Bijnens, N.
A1  - Williams, O. A.
A1  - Haenen, K.
A1  - Moritz, W.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Nanocrystalline-diamond thin films with high pH and penicillin sensitivity prepared on a capacitive Si–SiO2 structure
JF  - Electrochimica Acta. 54 (2009), H. 25
Y1  - 2009
SN  - 0013-4686
SP  - 5981
EP  - 5985
ER  - 
TY  - JOUR
A1  - Christiaens, P.
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Wagner, Torsten
A1  - Bijnens, N.
A1  - Williams, O. A.
A1  - Daenen, M.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
T1  - Nanocrystalline diamond-based field-effect capacitive pH sensor
JF  - Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)
Y1  - 2007
SN  - 1-4244-0841-5
N1  - Eurosensors 21, 2007, Lyon ; International Conference on Solid-State Sensors, Actuators and Microsystems 14, 2007, Lyon
SP  - 1891
EP  - 1894
PB  - IEEE
CY  - Piscataway
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Christiaens, P.
A1  - Williams, O. A.
A1  - Haenen, K.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Nanocrystalline diamond-based field-effect (bio-)chemical sensor
JF  - 8. Dresdner Sensor-Symposium : Sensoren für Umwelt, Klima und Sicherheit, Biosensoren und Biosysteme, Sensoren und Sensorsysteme für die Prozesstechnik, Trends in der Sensortechnik, Materialentwicklung für die Sensorik; 8. Dresdner Sensor-Symposium, 10. - 12. Dezember 2007, Dresden / Gerald Gerlach ... (Hg.)
Y1  - 2007
SN  - 978-3-940046-45-1
N1  - Dresdner Sensor-Symposium <8, 2007, Dresden> ; Dresdner Beiträge zur Sensorik ; 29
SP  - 191
EP  - 194
PB  - TUDpress, Verl. der Wissenschaften
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Khaydukova, M. M.
A1  - Zadorozhnaya, O. A.
A1  - Kirsanov, D. O.
A1  - Iken, Heiko
A1  - Rolka, David
A1  - Schöning, Michael Josef
A1  - Babain, V. A.
A1  - Vlasov, Yu. G.
A1  - Legin, A. V.
T1  - Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes
JF  - Russian journal of applied chemistry
N2  - The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.
Y1  - 2014
U6  - http://dx.doi.org/10.1134/S1070427214030112
SN  - 1608-3296 (E-Journal); 1070-4272 (Print)
VL  - 87
IS  - 3
SP  - 307
EP  - 314
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Karschuck, Tobias
A1  - Schmidt, Stefan
A1  - Achtsnicht, Stefan
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiplexing system for automated characterization of a capacitive field-effect sensor array
JF  - Physica Status Solidi A
N2  - In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive–voltage (C–V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles.
KW  - Capacitive field-effect sensor
KW  - Gold nanoparticles
KW  - Label-free detection
KW  - Multicell
KW  - Multiplexing
Y1  - 2023
U6  - http://dx.doi.org/10.1002/pssa.202300265
SN  - 1862-6300 (Print)
SN  - 1862-6319 (Online)
N1  - Corresponding author: Michael Josef Schöning
VL  - 220
IS  - 22
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Multiple sensor-type system for monitoring the microbicidal effectiveness of aseptic sterilisation processes
JF  - Food control
N2  - The present work describes a novel multiple sensor-type system for the real-time analysis of aseptic sterilisation processes employing gaseous hydrogen peroxide (H2O2) as a sterilant. The inactivation kinetics of Bacillus atrophaeus by gaseous H2O2 have been investigated by means of a methodical calibration experiment, taking into account the process variables H2O2 concentration, humidity and gas temperature. It has been found that the microbicidal effectiveness at H2O2 concentrations above 2% v/v is largely determined by the concentration itself, while at lower H2O2 concentrations, the gas temperature and humidity play a leading role. Furthermore, the responses of different types of gas sensors towards the influencing factors of the sterilisation process have been analysed within the same experiment. Based on a correlation established between the inactivation kinetics and the sensor responses, a calorimetric H2O2 sensor and a metal-oxide semiconductor (MOX) sensor have been identified as possible candidates for monitoring the microbicidal effectiveness of aseptic sterilisation processes employing gaseous H2O2. Therefore, two linear models that describe the relationship between sensor response and microbicidal effectiveness have been proposed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.foodcont.2014.07.063
SN  - 1873-7129 (E-Journal); 0956-7135 (Print)
VL  - 47
SP  - 615
EP  - 622
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Kerroumi, Iman
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Buniatyan, Vahe V.
A1  - Martirosyan, Norayr W.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiparameter sensor chip with Barium Strontium Titanate as multipurpose material
JF  - Electroanalysis
N2  - It is well known that biochemical and biotechnological processes are strongly dependent and affected by a variety of physico-chemical parameters such as pH value, temperature, pressure and electrolyte conductivity. Therefore, these quantities have to be monitored or controlled in order to guarantee a stable process operation, optimization and high yield. In this work, a sensor chip for the multiparameter detection of three physico-chemical parameters such as electrolyte conductivity, pH and temperature is realized using barium strontium titanate (BST) as multipurpose material. The chip integrates a capacitively coupled four-electrode electrolyte-conductivity sensor, a capacitive field-effect pH sensor and a thin-film Pt-temperature sensor. Due to the multifunctional properties of BST, it is utilized as final outermost coating layer of the processed sensor chip and serves as passivation and protection layer as well as pH-sensitive transducer material at the same time. The results of testing of the individual sensors of the developed multiparameter sensor chip are presented. In addition, a quasi-simultaneous multiparameter characterization of the sensor chip in buffer solutions with different pH value and electrolyte conductivity is performed. To study the sensor behavior and the suitability of BST as multifunctional material under harsh environmental conditions, the sensor chip was exemplarily tested in a biogas digestate.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/elan.201400076
SN  - 1521-4109 (E-Journal); 1040-0397 (Print)
VL  - 26
IS  - 5
SP  - 980
EP  - 987
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schubert, J.
A1  - Schöning, Michael Josef
A1  - Mourzina, Y. G.
A1  - Legin, A. V.
A1  - Vlasov, Y. G.
A1  - Zander, W.
A1  - Lüth, H.
T1  - Multicomponent thin films for electrochemical sensor applications prepared by pulsed laser deposition
JF  - Sensors and Actuators B. 76 (2001), H. 1-3
Y1  - 2001
SN  - 0925-4005
SP  - 327
EP  - 330
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Multi-well structure for cell culture on the chemical imaging sensor
Y1  - 2011
N1  - 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS) , Date: 5-9 June 2011
SP  - 2130
EP  - 2132
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Schneider, Benno
A1  - Geissler, Hanno
A1  - Gompel, Matthias van
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multi-sensor chip for the investigation of different types of metal oxides for the detection of H2O2 in the ppm range
JF  - physica status solidi (a)
N2  - In this work, a multi-sensor chip for the investigation of the sensing properties of different types of metal oxides towards hydrogen peroxide in the ppm range is presented. The fabrication process and physical characterization of the multi-sensor chip are described. Pure SnO2 and WO3 as well as Pd- and Pt-doped SnO2 films are characterized in terms of their sensitivity to H2O2. The sensing films have been prepared by drop-coating of water-dispensed nano-powders. A physical characterization, including scanning electron microscopy and X-ray diffraction analysis of the deposited metal-oxide films, was done. From the measurements in hydrogen peroxide atmosphere, it could be shown, that all of the tested metal oxide films are suitable for the detection of H2O2 in the ppm range. The highest sensitivity and reproducibility was achieved using Pt-doped SnO2.

Calibration plot of a SnO2, WO3, Pt-, and Pd-doped SnO2 gas sensor for H2O2 concentrations in the ppm range.
Y1  - 2013
SN  - 1862-6319
VL  - 210
IS  - 5
SP  - 898
EP  - 904
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Kramer, Friederike
A1  - Begoyan, Vardges K.
A1  - Buniatyan, Vahe V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing using high-k oxide of barium strontium titanate
JF  - Physica status solidi (a)
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431911
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1259
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schultze, J. W.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection of (bio-)chemical and physical quantities using an identical transducer principle
JF  - Sensors and Actuators B. 91 (2003), H. 1-3
Y1  - 2003
SN  - 0925-4005
SP  - 83
EP  - 91
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Buniatyan, V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Yoshinobu, T.
A1  - Ermelenko, Y.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Iwasaki, H.
A1  - Vlasov, Y.
T1  - Multi-component analysis based on the light-addressable potentiometric sensor (LAPS)
JF  - Proceedings : 11th international conference Sensor 2003; 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany
Y1  - 2003
N1  - Internationale Messe mit Kongress Sensor <11, 2003, Nürnberg>
SP  - 141
EP  - 144
PB  - AMA Service
CY  - Wunstorf
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Suco, Henri-Pierre
A1  - Rysstad, Gunnar
A1  - Schöning, Michael Josef
T1  - Monitoring the microbicidal effectiveness of gaseous hydrogen peroxide in sterilisation processes by means of a calorimetric gas sensor
JF  - Food control
N2  - In the present work, a novel method for monitoring sterilisation processes with gaseous H2O2 in combination with heat activation by means of a specially designed calorimetric gas sensor was evaluated. Therefore, the sterilisation process was extensively studied by using test specimens inoculated with Bacillus atrophaeus spores in order to identify the most influencing process factors on its microbicidal effectiveness. Besides the contact time of the test specimens with gaseous H2O2 varied between 0.2 and 0.5 s, the present H2O2 concentration in a range from 0 to 8% v/v (volume percent) had a strong influence on the microbicidal effectiveness, whereas the change of the vaporiser temperature, gas flow and humidity were almost negligible. Furthermore, a calorimetric H2O2 gas sensor was characterised in the sterilisation process with gaseous H2O2 in a wide range of parameter settings, wherein the measurement signal has shown a linear response against the H2O2 concentration with a sensitivity of 4.75 °C/(% v/v). In a final step, a correlation model by matching the measurement signal of the gas sensor with the microbial inactivation kinetics was established that demonstrates its suitability as an efficient method for validating the microbicidal effectiveness of sterilisation processes with gaseous H2O2.
KW  - hydrogen peroxide
KW  - sterilisation
KW  - Bacillus atrophaeus
KW  - calorimetric gas sensor
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.foodcont.2012.11.048
SN  - 0956-7135
VL  - 31
IS  - 2
SP  - 530
EP  - 538
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Bohrn, U.
A1  - Stütz, E.
A1  - Fuchs, K.
A1  - Fleischer, M.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
T1  - Monitoring of irritant gas using a whole-cell-based sensor system
JF  - Sensors and Actuators B: Chemical
N2  - Cell-based sensors for the detection of gases have long been underrepresented, due to the cellular requirement of being cultured in a liquid environment. In this work we established a cell-based gas biosensor for the detection of toxic substances in air, by adapting a commercial sensor chip (Bionas®), previously used for the measurement of pollutants in liquids. Cells of the respiratory tract (A549, RPMI 2650, V79), which survive at a gas phase in a natural context, are used as biological receptors. The physiological cell parameters acidification, respiration and morphology are continuously monitored in parallel. Ammonia was used as a highly water-soluble model gas to test the feasibility of the sensor system. Infrared measurements confirmed the sufficiency of the medium draining method. This sensor system provides a basis for many sensor applications such as environmental monitoring, building technology and public security.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.snb.2012.05.088
SN  - 0925-4005
VL  - 175
SP  - 208
EP  - 217
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Gasparyan, F.V.
A1  - Vitusevich, S.A.
A1  - Offenhäusser, A.
A1  - Schöning, Michael Josef
T1  - Modified charge fluctuation noise model for electrolyte-insulator-semiconductor devices
JF  - Modern Physics Letters B (MPLB). 25 (2011), H. 11
Y1  - 2011
SN  - 0217-9849
SP  - 831
EP  - 840
PB  - World Scientific Publ.
CY  - Singapur
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Buß, G.
A1  - Lüth, H.
A1  - Schultze, J.W.
T1  - Modifications and characterization of a silicon-based microelectrode array
JF  - Electrochimica Acta. 44 (1999), H. 21-22
Y1  - 1999
SN  - 0013-4686
SP  - 3899
EP  - 3910
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Iken, Heiko
A1  - Johnen, Anna Lynn
A1  - Richstein, Benjamin
A1  - Hellmich, Lena
A1  - Poghossian, Arshak
A1  - Knoch, Joachim
A1  - Schöning, Michael Josef
T1  - Miniaturized pH-Sensitive Field-Effect Capacitors with Ultrathin Ta₂O₅ Films Prepared by Atomic Layer Deposition
JF  - physica status solidi (a) applications and materials science
N2  - Miniaturized electrolyte–insulator–semiconductor capacitors (EISCAPs) with ultrathin gate insulators have been studied in terms of their pH-sensitive sensor characteristics: three different EISCAP systems consisting of Al–p-Si–Ta2O5(5 nm), Al–p-Si–Si3N4(1 or 2 nm)–Ta2O5 (5 nm), and Al–p-Si–SiO2(3.6 nm)–Ta2O5(5 nm) layer structures are characterized in buffer solution with different pH values by means of capacitance–voltage and constant capacitance method. The SiO2 and Si3N4 gate insulators are deposited by rapid thermal oxidation and rapid thermal nitridation, respectively, whereas the Ta2O5 film is prepared by atomic layer deposition. All EISCAP systems have a clear pH response, favoring the stacked gate insulators SiO2–Ta2O5 when considering the overall sensor characteristics, while the Si3N4(1 nm)–Ta2O5 stack delivers the largest accumulation capacitance (due to the lower equivalent oxide thickness) and a higher steepness in the slope of the capacitance–voltage curve among the studied stacked gate insulator systems.
KW  - atomic layer deposition
KW  - capacitive field-effect sensors
KW  - pH sensors
KW  - ultrathin gate insulators
Y1  - 2022
U6  - http://dx.doi.org/10.1002/pssa.202100660
SN  - 1862-6319
VL  - 219
IS  - 8
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Näther, Niko
A1  - Auger, V.
A1  - Poghossian, Arshak
A1  - Koudelka-Hep, M.
T1  - Miniaturized flow-through cell with integrated capacitive EIS sensors fabricated at wafer level using Si and Su-8 technologies
JF  - Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors
Y1  - 2004
N1  - Chemical sensors ; 20.2004 Suppl. B. IMCS ; (10, 2004, Tsukuba) ; International Meeting on Chemical Sensors ; (10 : ; 2004.07.11-14 : ; Tsukuba)
SP  - 554
EP  - 555
PB  - Japan Association of Chemical Sensors
CY  - Fukuoka
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Kaneko, Kazumi
A1  - Matsuo, Akira
A1  - Wagner, Torsten
A1  - Kanoh, Shin`ichiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Miniaturized chemical imaging sensor system using an OLED display panel
JF  - Procedia Engineering. 5 (2010)
Y1  - 2010
SN  - 1877-7058
N1  - Eurosensor XXIV Conference
SP  - 516
EP  - 519
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Kaneko, Kazumi
A1  - Matsuo, Akira
A1  - Wagner, Torsten
A1  - Kanoh, Shiníchiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Miniaturized chemical imaging sensor system using an OLED display panel
JF  - Sensors and Actuators B: Chemical
N2  - The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the current–voltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.
KW  - LAPS
KW  - Light-addressable potentiometric sensor
KW  - Chemical imaging sensor
KW  - Organic light-emitting diode display
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.snb.2011.02.029
SN  - 0925-4005
N1  - Part of special issue "Eurosensors XXIV, 2010"
VL  - 170
SP  - 82
EP  - 87
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-Ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
ED  - Yamaguchi, Takami
T1  - Miniaturized and high-speed chemical imaging systems
T2  - Nano-Biomedical Engineering 2012. Proceedings of the Tohoku University Global Centre of Excellence Programme, Sakura Hall, Tohoku University, Sendai Japan, 5 – 6 March 2012
Y1  - 2012
U6  - http://dx.doi.org/10.1142/9781848169067_0045
SP  - 386
EP  - 395
PB  - World Scientific
CY  - Singapur
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Ronkel, F.
A1  - Crott, M.
A1  - Thust, M. (u.a.)
T1  - Miniaturization of potentiometric sensors using porous silicon microtechnology
JF  - Electrochimica Acta. 42 (1997), H. 22
Y1  - 1997
SN  - 0013-4686
SP  - 3185
EP  - 3193
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Dawgul, M.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Miniaturised reference electrodes for field-effect sensors compatible to silicon chip technology
JF  - Electrochimica Acta. 51 (2005), H. 5
Y1  - 2005
SN  - 0013-4686
U6  - http://dx.doi.org/10.1016/j.electacta.2005.04.063
SP  - 930
EP  - 937
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Näther, Niko
A1  - Auger, V.
A1  - Poghossian, Arshak
A1  - Koudelka-Hep, M.
T1  - Miniaturised flow-through cell with integrated capacitive EIS sensor fabricated at wafer level using Si and SU-8 technologies
JF  - Sensors and Actuators B. 108 (2005), H. 1-2
Y1  - 2005
SN  - 0925-4005
N1  - Proceedings of the Tenth International Meeting on Chemical Sensors — IMCS - 10 2004
SP  - 986
EP  - 992
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Yeung, C.-K.
A1  - Offenhäusser, A.
A1  - Schöning, Michael Josef
T1  - Microsensors based on ion-sensitive field-effect transistors for biomedical applications
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1036
EP  - 1037
ER  - 
TY  - JOUR
A1  - Moritz, W.
A1  - Yoshinobu, T.
A1  - Finger, F.
A1  - Krause, S.
A1  - Xu, M.
A1  - Schöning, Michael Josef
T1  - Microscopy of impedance and surface ion concentrations
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1000
EP  - 1001
ER  - 
TY  - JOUR
A1  - Leinhos, Marcel
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Micromachined multi-parameter sensor chip for the control of polymer-degradation medium
JF  - Physica Status Solidi (A) : special issue on engineering and functional interfaces
N2  - It is well known that the degradation environment can strongly influence the biodegradability and kinetics of biodegradation processes of polymers. Therefore, besides the monitoring of the degradation process, it is also necessary to control the medium in which the degradation takes place. In this work, a micromachined multi-parameter sensor chip for the control of the polymer-degradation medium has been developed. The chip combines a capacitive field-effect pH sensor, a four-electrode electrolyte-conductivity sensor and a thin-film Pt-temperature sensor. The results of characterization of individual sensors are presented. In addition, the multi-parameter sensor chip together with an impedimetric polymer-degradation sensor was simultaneously characterized in degradation solutions with different pH and electrolyte conductivity. The obtained results demonstrate the feasibility of the multi-parameter sensor chip for the control of the polymer-degradation medium.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201330364
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1346
EP  - 1351
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Miyamoto, Ko-ichiro
A1  - Shigihara, Noriko
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Microfluidic systems with free definable sensor spots by an integrated light-addressable potentiometric sensor
JF  - Procedia Engineering. 25 (2011)
Y1  - 2011
SN  - 1877-7058
N1  - EurosensorsXXV ; Proc. Eurosensors XXV, September 4-7, 2011, Athens, Greece
SP  - 791
EP  - 794
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Raue, Markus
A1  - Schusser, Sebastian
A1  - Jeitner, C.
A1  - Breuer, L.
A1  - Wagner, P.
A1  - Poghossian, Arshak
A1  - Förster, Arnold
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
T1  - Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films
JF  - Physica Status Solidi  (a)
N2  - Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3–12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.
Y1  - 2012
U6  - http://dx.doi.org/10.1002/pssa.201100763
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 839
EP  - 845
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Arida, Hassan
A1  - Mohsen, Q.
A1  - Schöning, Michael Josef
T1  - Microfabrication, characterization and analytical application of a new thin-film silver microsensor
JF  - Electrochimica Acta. 54 (2009), H. 13
Y1  - 2009
SN  - 0013-4686
SP  - 3543
EP  - 3547
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Lüth, H.
T1  - Microfabricated semiconductor structures – Advances in (bio-)chemical sensing
JF  - Coupling of biological and electronic systems : proceedings of the 2nd Caesarium, Bonn, November 1 - 3, 2000 / Karl-Heinz Hoffmann, ed.
Y1  - 2002
SN  - 3-540-43699-5
SP  - 79
EP  - 92
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
T1  - Microelectronics contacts (bio-)chemistry – Semiconductor-based sensors
JF  - Biologi Italiani. 8 (2001)
Y1  - 2001
SN  - 0392-2510
SP  - 5
EP  - 10
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Glück, O.
A1  - Schroth, P.
A1  - Schütz, S. (u.a.)
T1  - Microelectrodes, capacitors and BioFETs: Novel trends in silicon-based biochemical sensing
JF  - Biocybernetics and Biomedical Engineering. 19 (1999), H. 1
Y1  - 1999
SN  - 0208-5216
SP  - 105
EP  - 126
ER  -