TY - CHAP A1 - Schulze-Buxloh, Lina A1 - Groß, Rolf Fritz T1 - Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions T2 - New Perspectives in Science Education - International Conference N2 - In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future. KW - Freshmen KW - roleplay KW - Smart Building Engineering KW - BIM KW - remote teamwork Y1 - 2021 N1 - New Perspectives in Science Education - 10th Edition, 18-19 March 2021, Fully Virtual Conference PB - Filodiritto CY - Bologna ER - TY - CHAP A1 - Butenweg, Christoph ED - Kuzmanović, Vladan ED - Ignjatović, Ivan T1 - Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies T2 - Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions N2 - Nowadays modern high-performance buildings and facilities are equipped with monitoring systems and sensors to control building characteristics like energy consumption, temperature pattern and structural safety. The visualization and interpretation of sensor data is typically based on simple spreadsheets and non-standardized user-oriented solutions, which makes it difficult for building owners, facility managers and decision-makers to evaluate and understand the data. The solution of this problem in the future are integrated BIM-Sensor approaches which allow the generation of BIM models incorporating all relevant information of monitoring systems. These approaches support both the dynamic visualization of key structural performance parameters, the effective long-term management of sensor data based on BIM and provide a user-friendly interface to communicate with various stakeholders. A major benefit for the end user is the use of the BIM software architecture, which is the future standard anyway. In the following, the application of the integrated BIM-Sensor approach is illustrated for a typical industrial facility as a part of an early warning and rapid response system for earthquake events currently developed in the research project “ROBUST” with financial support by the German Federal Ministry for Economic Affairs and Energy (BMWI). Y1 - 2021 N1 - Civil Engineering 2021 – Achievements and Visions, University of Belgrade, October 25 – 26, 2021 Belgrade, Serbia SP - 67 EP - 75 PB - University of Belgrade CY - Belgrade ER - TY - THES A1 - Schmitz, Jennifer T1 - Inklusives Design: Multisensorisches Branding für sehbehinderte, blinde und sehende Menschen N2 - Multisensorisches Branding bezeichnet die Gestaltung für mindestens zwei Sinne. Diese Bachelorarbeit beinhaltet daher ein Konzept, um sehbehinderten Menschen und Blinden das Branding einer Marke im Bereich der Bekleidungsindustrie zugänglich zu machen. Durch die gezielte Kombination von Haptik und Optik ist im Rahmen dieser Arbeit eine Bekleidungsmarke entstanden, deren Textilien jegliche Informationen für sehbehinderte und blinde Menschen enthalten, ohne dabei auf eine ansprechende Optik für Sehende zu verzichten. Vor allem durch neu entwickelte Open Source Symbole, die fühlbar sind, und einen Barcode wird Betroffenen in Zukunft der Kauf von Bekleidung sowie der Waschvorgang erleichtert. KW - Inklusion KW - Barrierefrei KW - Textilbranche KW - Waschetiketten KW - Haptik Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Šakić, Bogdan A1 - Milijaš, Aleksa A1 - Marinković, Marko A1 - Butenweg, Christoph A1 - Klinkel, Sven ED - Papadrakakis, Manolis ED - Fragiadakis, Michalis T1 - Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load T2 - Proceedings of COMPDYN 2021 N2 - Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and masonry infills, earthquakes of lower to medium intensity some-times can cause significant level of damage of masonry infill walls. Especially important is the level of damage of face loaded infill masonry walls (out-of-plane direction) as out-of-plane load cannot only bring high level of damage to the wall, it can also be life-threating for the people near the wall. The response in out-of-plane direction directly depends on the prior in-plane damage, as previous investigation shown that it decreases resistance capacity of the in-fills. Behaviour of infill masonry walls with and without prior in-plane load is investigated in the experimental campaign and the results are presented in this paper. These results are later compared with analytical approaches for the out-of-plane resistance from the literature. Conclusions based on the experimental campaign on the influence of prior in-plane damage on the out-of-plane response of infill walls are compared with the conclusions from other authors who investigated the same problematic. KW - Earthquake Engineering KW - Unreinforced masonry walls KW - Out-of-plane load KW - In- plane damage KW - Out-of-plane failure Y1 - 2021 SN - 9786188507258 U6 - https://doi.org/10.7712/120121.8527.18913 SN - 2623-3347 N1 - COMPDYN 2021, 28-30 June 2021, Streamed from Athens, Greece, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering SP - 808 EP - 828 PB - National Technical University of Athens CY - Athen ER - TY - JOUR A1 - Brockhaus, Moritz K. A1 - Behbahani, Mehdi A1 - Muris, Farina A1 - Jansen, Sebastian V. A1 - Schmitz- Rode, Thomas A1 - Steinseifer, Ulrich A1 - Clauser, Johanna C. T1 - In vitro thrombogenicity testing of pulsatile mechanical circulatory support systems: Design and proof-of-concept JF - Artificial Organs N2 - Thrombogenic complications are a main issue in mechanical circulatory support (MCS). There is no validated in vitro method available to quantitatively assess the thrombogenic performance of pulsatile MCS devices under realistic hemodynamic conditions. The aim of this study is to propose a method to evaluate the thrombogenic potential of new designs without the use of complex in-vivo trials. This study presents a novel in vitro method for reproducible thrombogenicity testing of pulsatile MCS systems using low molecular weight heparinized porcine blood. Blood parameters are continuously measured with full blood thromboelastometry (ROTEM; EXTEM, FIBTEM and a custom-made analysis HEPNATEM). Thrombus formation is optically observed after four hours of testing. The results of three experiments are presented each with two parallel loops. The area of thrombus formation inside the MCS device was reproducible. The implantation of a filter inside the loop catches embolizing thrombi without a measurable increase of platelet activation, allowing conclusions of the place of origin of thrombi inside the device. EXTEM and FIBTEM parameters such as clotting velocity (α) and maximum clot firmness (MCF) show a total decrease by around 6% with a characteristic kink after 180 minutes. HEPNATEM α and MCF rise within the first 180 minutes indicate a continuously increasing activation level of coagulation. After 180 minutes, the consumption of clotting factors prevails, resulting in a decrease of α and MCF. With the designed mock loop and the presented protocol we are able to identify thrombogenic hot spots inside a pulsatile pump and characterize their thrombogenic potential. Y1 - 2021 U6 - https://doi.org/10.1111/aor.14046 SN - 1525-1594 VL - 45 IS - 12 SP - 1513 EP - 1521 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Lowis, Carsten A1 - Ferguson, Simon A1 - Paulßen, Elisabeth A1 - Hoehr, Cornelia T1 - Improved Sc-44 production in a siphon-style liquid target on a medical cyclotron JF - Applied Radiation and Isotopes Y1 - 2021 U6 - https://doi.org/10.1016/j.apradiso.2021.109675 SN - 0969-8043 VL - 172 IS - Art. 109675 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Najarov, Azer T1 - Ich sehe was, was Du nicht siehst: Herkunft & Identität jüdischer Menschen in Deutschland nach der Nachkriegszeit N2 - Wir alle haben schon einmal von ihnen gehört. Die einen kennen sie aus dem Geschichtsunterricht, die anderen haben sie vielleicht auch schon mal bewusst oder unbewusst auf der Straße gesehen. Einige sind es sogar selbst. Die Rede ist von jüdischen Menschen in Deutschland. In unserer Bundesrepublik wird die jüdische Bevölkerung unausweichlich mit dem Gedanken des Holocausts verbunden. Jüdinnen und Juden wird somit eine Identität zugesprochen, mit der sie nichts zu tun haben. Es findet eine Stigmatisierung statt. Dabei sind jüdische Menschen heutzutage so divers wie noch nie. Das Printmedium »Ich sehe was, was Du nicht siehst« beleuchtet diese selten wahrgenommene Diversität und zeigt durch spannende Interviews eine jüdische Welt, die außerhalb der NS-Verbrechen liegt. Darüber hinaus findet man Informationen zu verschiedenen jüdischen Bräuchen, historischen Ereignissen und interessanten Infografiken.  KW - Juden KW - Tora KW - Israel KW - Davidstern KW - Holocaust Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Devjatko, Elli T1 - Hyphan - ein modulares Sitzsystem mit intelligenten Materialien N2 - Hyphan ist ein modulares System, welches sich aus diversen Grundelementen aufbaut. Die Möglichkeiten des Aufbaus sind vielseitig und Umfangreich. Achsiale- sowie lineare Erweiterung sorgen für ein Modul Umfang, der zahlreiche Fläche erschaffen kann. So kann Länge und Tiefe eines Objekts umfangreich sowie vielfältig gestaltet werden. Hyphan wendet sich an die Bedürfnisse der Neuen Generationen, versucht flexibel in seiner Form zu sein und zuverlässig, langlebig und qualitativ in seinem Material. Durch die Diskussion über die neuen Formen der Mobilität und dem Nachhaltigkeitsaspekt sehe ich in der Gestaltung von urbanen Knotenpunkten und ihren Interior sehr großes Potenzial für Hyphan. KW - Hyphan KW - Flughafen KW - Bahnhof KW - Lobby KW - antivirale Eigenschaften Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Dickhoff, Jens A1 - Horikawa, Atsushi A1 - Funke, Harald T1 - Hydrogen Combustion - new DLE Combustor Addresses NOx Emissions and Flashback JF - Turbomachinery international : the global journal of energy equipment Y1 - 2021 SN - 2767-2328 SN - 0149-4147 VL - 62 IS - 4 SP - 26 EP - 27 PB - MJH Life Sciences CY - Cranbury ER - TY - JOUR A1 - Erpicum, Sebastien A1 - Crookston, Brian M. A1 - Bombardelli, Fabian A1 - Bung, Daniel Bernhard A1 - Felder, Stefan A1 - Mulligan, Sean A1 - Oertel, Mario A1 - Palermo, Michele T1 - Hydraulic structures engineering: An evolving science in a changing world JF - Wires Water Y1 - 2021 U6 - https://doi.org/10.1002/wat2.1505 SN - 2049-1948 VL - 8 IS - 2 PB - Wiley CY - Weinheim ER - TY - THES A1 - Keller, Valeria T1 - HUMAN(E): Ein Projekt zur Humanisierung der Arbeitswelt N2 - "HUMAN(E) at work" ist ein Projekt, welches auf Basis eigener Erfahrung entstanden ist. Ein Magazin in Zeitungsoptik sollte an den humanitären Gedanken bezüglich der Arbeitswelt des 21. Jahrhunderts anknüpfen. Das Ziel: Einen Dialog schaffen für Selbstreflexion, Erfahrungsaustausch und die Entdeckung neuer Arbeitsmethoden am Arbeitsplatz. Weg vom typisch tayloristisch-geprägtem Arbeiter, hin zur besseren Work-Life-Balance. Begleitet durch die "nahe" Optik der Zeitung und Illustrationen mit dem Menschen im Vordergrund, versucht das Magazin nicht nur zu informieren, sondern auch Möglichkeiten aufzutun. So sind nicht nur aufregende Arbeitsstellen zu finden, sondern unterstützt auch die Möglichkeit sich in schwierigen Arbeitslagen Gehör zu verschaffen. Ein einfaches Druckprinzip mit Zeitungspapier und begrenzten Farben ermöglicht außerdem einen günstigen Preis und dadurch hohe Erreichbarkeit in verschiedensten Personenkreisen. KW - Editorial KW - Humanität KW - Magazin KW - Illustration KW - Zeitung Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Mertens, Alexander A1 - Pütz, Sebastian A1 - Brauner, Philipp A1 - Brillowski, Florian Sascha A1 - Buczak, Nadine A1 - Dammers, Hannah A1 - van Dyck, Marc A1 - Kong, Iris A1 - Königs, Peter A1 - Kortomeikel, Frauke Carole A1 - Rodemann, Niklas A1 - Schaar, Anne Kathrin A1 - Steuer-Dankert, Linda A1 - Wlecke, Shari A1 - Gries, Thomas A1 - Leicht-Scholten, Carmen A1 - Nagel, Saskia K. A1 - Piller, Frank Thomas A1 - Schuh, Günther A1 - Ziefle, Martina A1 - Nitsch, Verena T1 - Human digital shadow: Data-based modeling of users and usage in the internet of production T2 - 14th Conference Human System Interaction Conference Proceedings N2 - Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion. KW - digital shadow KW - cyber physical production system KW - user & usage KW - internet of production Y1 - 2021 U6 - https://doi.org/10.1109/HSI52170.2021.9538729 N1 - 14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland SP - 1 EP - 8 PB - IEEE ER - TY - JOUR A1 - Grundlach, Michael A1 - Baumann, Martin A1 - Engelmann, Ulrich M. ED - Dössel, Olaf T1 - How Multimodal Examinations Can Increase Sustainable Student Gain by Aligning Teaching and Assessment JF - Current Directions in Biomedical Engineering N2 - Modern industry and multi-discipline projects require highly trained individuals with resilient science and engineering back-grounds. Graduates must be able to agilely apply excellent theoretical knowledge in their subject matter as well as essential practical “hands-on” knowledge of diverse working processes to solve complex problems. To meet these demands, university education follows the concept of Constructive Alignment and thus increasingly adopts the teaching of necessary practical skills to the actual industry requirements and assessment routines. However, a systematic approach to coherently align these three central teaching demands is strangely absent from current university curricula. We demonstrate the feasibility of implementing practical assessments in a regular theory-based examination, thus defining the term “blended assessment”. We assessed a course for natural science and engineering students pursuing a career in biomedical engineering, and evaluated the benefit of blended assessment exams for students and lecturers. Our controlled study assessed the physiological background of electrocardiograms (ECGs), the practical measurement of ECG curves, and their interpretation of basic pathologic alterations. To study on long time effects, students have been assessed on the topic twice with a time lag of 6 months. Our findings suggest a significant improvement in student gain with respect to practical skills and theoretical knowledge. The results of the reassessments support these outcomes. From the lecturers ́ point of view, blended assessment complements practical training courses while keeping organizational effort manageable. We consider blended assessment a viable tool for providing an improved student gain, industry-ready education format that should be evaluated and established further to prepare university graduates optimally for their future careers. KW - constructive alignment KW - examination KW - long-term retention KW - multimodal KW - practical learning Y1 - 2021 SN - 2364-5504 U6 - https://doi.org/10.1515/cdbme-2021-2019 VL - 7 IS - 7/2 SP - 73 EP - 76 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Bohndick, Carla A1 - Bosse, Elke A1 - Jänsch, Vanessa K. A1 - Barnat, Miriam T1 - How different diversity factors affect the perception of first-year requirements in higher education JF - Frontline Learning Research N2 - In the light of growing university entry rates, higher education institutions not only serve larger numbers of students, but also seek to meet first-year students’ ever more diverse needs. Yet to inform universities how to support the transition to higher education, research only offers limited insights. Current studies tend to either focus on the individual factors that affect student success or they highlight students’ social background and their educational biography in order to examine the achievement of selected, non-traditional groups of students. Both lines of research appear to lack integration and often fail to take organisational diversity into account, such as different types of higher education institutions or degree programmes. For a more comprehensive understanding of student diversity, the present study includes individual, social and organisational factors. To gain insights into their role for the transition to higher education, we examine how the different factors affect the students’ perception of the formal and informal requirements of the first year as more or less difficult to cope with. As the perceived requirements result from both the characteristics of the students and the institutional context, they allow to investigate transition at the interface of the micro and the meso level of higher education. Latent profile analyses revealed that there are no profiles with complex patterns of perception of the first-year requirements, but the identified groups rather differ in the overall level of perceived challenges. Moreover, SEM indicates that the differences in the perception largely depend on the individual factors self-efficacy and volition. Y1 - 2021 U6 - https://doi.org/10.14786/flr.v9i2.667 SN - 2295-3159 VL - 9 IS - 2 SP - 78 EP - 95 PB - EARLI ER - TY - CHAP A1 - Peterson, Leif Arne ED - Schlüter, Dominik T1 - Holzbau T2 - Wofür braucht man das eigentlich? Ein Handbuch für Mathematiklehrkräfte der Sekundarstufe I und II Y1 - 2021 SN - 978-3-7543-2606-0 SP - 21 EP - 23 PB - BoD CY - Norderstedt ER - TY - JOUR A1 - Oertel, Mario A1 - Bung, Daniel Bernhard T1 - Hochwasserschutz - eine Aufgabe für eine nachhaltige Wasserwirtschaft JF - Wasserwirtschaft KW - Wasserbau KW - Architektur KW - Wasserwirtschaft KW - Deutschland Y1 - 2021 SN - 0043-0978 VL - 111 IS - 9-10 SP - 3 EP - 19 PB - Springer Vieweg CY - Wiesbaden ER - TY - THES A1 - Funger, Marvin T1 - Historie kinetischer Typografie: zeitliche Abbildung der Entstehung und Veränderung kinetischer Typografie N2 - Die heutige, vielfältige kinetische Typografie hat eine lange Entwicklung durchgemacht. Die Darstellung dieser in einer zeitlichen Reihenfolge vermittelt ein Verständnis über Ursprung und Evolution. Die Publikation stellt die historische, analoge sowie die moderne, digitale Entwicklung dar. Dabei wird die Verbindung und der Einfluss der damaligen Gestaltung in der heutigen Umsetzung beleuchtet. Die Plakatreihe erklärt drei Anwendungsmöglichkeiten der kinetischen Typografie. Hierbei werden teils reale Objekte nachgestellt, um die Wiedererkennung dieser im Alltag zu fördern. Gemeinsam zeigen die Plakate und die Publikation ein breites Spektrum der kinetischen Typografie und fördern das Verständnis dieser digitalen Umsetzung von Schrift in bewegter Form. KW - Bewegung KW - Typografie KW - Kinetik KW - Digitalisierung KW - Abbildungen Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Friede, Celine T1 - Herbothecary: Eine App für den eigenen Apothekergarten N2 - „Gegen jedes Leiden ist ein Kraut gewachsen“ lautet eine alte Volksweisheit. Doch auch heute, in einer Zeit, in der wir Verantwortung in unserer eigenen Gesundheit übernehmen möchten, wächst das Interesse an Pflanzenheilkunde stetig. Das Projekt „Herbothecary“ schafft einen einfachen Zugang zur Welt der Heilpflanzen. Dies geschieht mithilfe einer App, die als Auswahlhilfe für Samen dient und alle nötigen Informationen zur Heilwirkung und Identifikation der Pflanze bietet. Auch prozessbegleitende Anleitungen finden die Nutzenden hier. Um das Packaging-Design der Samen besonders nachhaltig zu gestalten, besteht dieses aus Samenpapier. Die Samenpäckchen können nach der Nutzung also einfach eingepflanzt werden, anstatt diese wegzuwerfen, wodurch unnötiger Verpackungsmüll vermieden wird. „Herbothecary“ dient als Grundlage für den Anbau deines eigenen Apothekergartens. KW - App Design KW - Pflanzen KW - Heilpflanzen KW - Botanik KW - Gesundheit Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Buchenroth, Gina T1 - Hanging shoes: ein Schuhregal für Sneaker N2 - Dieses Jahr werden allein in Deutschland ca. 47 Millionen Sneaker verkauft. Die Sneakerbranche boomt und ist nicht mehr aufzuhalten. Was zu Beginn nur ein Sportschuh war, ist heute ein Lifestyleprodukt und auf dem Markt und im Alltag nicht mehr wegzudenken. Der Hype um den neuesten Sneaker ist unglaublich groß und das Bedürfnis nach dem Präsentieren und dem zur Schau stellen wächst. Mit der float collection gelingt es, den Verkaufs- und Ausstellungsraum ganz individuell und vielseitig zu gestalten. Das Besondere hier ist, dass die Schuhe sich visuell schwebend in den Regalen etablieren und so von allen Seiten betrachtet werden können. Das Konstrukt ist modular und bringt durch das Material Metall eine lange Produktlebensdauer mit sich. So bringst du nicht nur die Sneaker, sondern auch die Herzen deiner Kunden zum Schweben. Let the shoes float. KW - Furniture KW - Design KW - Sneaker KW - Float KW - Interiordesign Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Laack, Walter van T1 - Größer als das ganze Universum Y1 - 2021 SN - 978-3-936624-38-0 PB - van Laack GmbH CY - Aachen ER - TY - THES A1 - Cremer, Lara T1 - Grenzgänger: Japan in Deutschland N2 - Durch die enorme geografische und kulturelle Entfernung zwischen Deutschland und Japan entstehen zwischen den beiden Kulturen immer wieder Vorurteile und Missverständnisse. Diese wurzeln oft in gegenseitiger Kontaktscheue, welche wiederum aus Ängsten entsteht, sich dem Gegenüber nicht angemessen genug verhalten zu können, und behindern so an einem authentischen Austausch. Das medienübergreifende Nachschlagewerk „Grenzgänger“ berichtet über verschiedenste Schnittstellen zwischen Deutschland und Japan, die den Austausch und die Zusammenarbeit der beiden Länder vorantreiben. Kern dabei ist es, zu zeigen, wie zwei sehr unterschiedliche Kulturen sich doch bei genauerem Hinsehen gleichen und sowohl aus Gemeinsamkeiten als auch Unterschieden lernen und gemeinsam wachsen kann. Es soll Berührungsängste auflösen und die Rezipierenden inspirieren, offener dem vermeintlich Fremden gegenüberzutreten.  KW - Kulturaustausch KW - Japan KW - Fotografie KW - Kalligrafie KW - Fadenheftung Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Chajan, Eduard A1 - Schulte-Tigges, Joschua A1 - Reke, Michael A1 - Ferrein, Alexander A1 - Matheis, Dominik A1 - Walter, Thomas T1 - GPU based model-predictive path control for self-driving vehicles T2 - IEEE Intelligent Vehicles Symposium (IV) N2 - One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments. KW - Heuristic algorithms KW - Computational modeling KW - model-predictive control KW - GPU KW - autonomous driving Y1 - 2021 SN - 978-1-7281-5394-0 U6 - https://doi.org/10.1109/IV48863.2021.9575619 N1 - 2021 IEEE Intelligent Vehicles Symposium (IV), July 11-17, 2021. Nagoya, Japan SP - 1243 EP - 1248 PB - IEEE CY - New York, NY ER - TY - JOUR A1 - Karschuck, Tobias A1 - Kaulen, Corinna A1 - Poghossian, Arshak A1 - Wagner, Patrick H. A1 - Schöning, Michael Josef T1 - Gold nanoparticle-modified capacitive field-effect sensors: Studying the surface density of nanoparticles and coupling of charged polyelectrolyte macromolecules JF - Electrochemical Science Advances N2 - The coupling of ligand-stabilized gold nanoparticles with field-effect devices offers new possibilities for label-free biosensing. In this work, we study the immobilization of aminooctanethiol-stabilized gold nanoparticles (AuAOTs) on the silicon dioxide surface of a capacitive field-effect sensor. The terminal amino group of the AuAOT is well suited for the functionalization with biomolecules. The attachment of the positively-charged AuAOTs on a capacitive field-effect sensor was detected by direct electrical readout using capacitance-voltage and constant capacitance measurements. With a higher particle density on the sensor surface, the measured signal change was correspondingly more pronounced. The results demonstrate the ability of capacitive field-effect sensors for the non-destructive quantitative validation of nanoparticle immobilization. In addition, the electrostatic binding of the polyanion polystyrene sulfonate to the AuAOT-modified sensor surface was studied as a model system for the label-free detection of charged macromolecules. Most likely, this approach can be transferred to the label-free detection of other charged molecules such as enzymes or antibodies. KW - polystyrene sulfonate KW - gold nanoparticles KW - field-effect sensor KW - detection of charged macromolecules KW - capacitive EIS sensor Y1 - 2021 U6 - https://doi.org/10.1002/elsa.202100179 SN - 0938-5193 VL - 2 IS - 5 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Wahlefeld, Leon T1 - Generative Gestaltung: wie eine Herangehensweise die Zukunft des Designs revolutionieren könnte. N2 - Diese Bachelorarbeit setzt sich mit der „Generativen Gestaltung“ und ihren Möglichkeiten für Gestaltende auseinander. Die automatisierte Bearbeitung eines gestalterischen Projektes soll vorrangig Vorteile beim Arbeiten mit großen Datenmengen bieten. Ziel war es, eine Plakatreihe zu entwerfen, die auf der Grundlage eines Codes - also eines strikten Regelwerks - basiert. Mithilfe dieses Verfahrens kann auf Knopfdruck eine beliebige Menge an Plakaten generiert werden. Durch die Festlegung bestimmter Parameter innerhalb des Codes wird gewährleistet, dass jedes ausgespielte Plakat anders ist als sein Vorgänger. Diese Arbeit dient als eine erste anskizzierte Grundlage dafür, wie grafischer Output automatisiert und vor allem aktualisiert generiert werden kann. Dieses Prinzip kann auf eine Vielzahl von Inhalten und Umsetzungen angewendet werden. KW - Layout KW - Plakat KW - Generativ KW - Satellitenbilder KW - Processing Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Halstrick, Anna-Marie T1 - Generation Pro Impfen: die Gesellschaft zum Impfen animieren. Eine Aufklärungskampagne für eine höhere Impfbereitschaft. N2 - Jeder hat schon etwas vom Impfen gehört, trotzdem wird es von vielen vernachlässigt. Das Thema Impfen hat besonders im vergangenen Jahr an Relevanz gewonnen. Vor allem durch die Corona-Pandemie wird der Menschheit bewusst, welch wichtige Bedeutung ein Impfstoff hat. Doch auch abgesehen von der Impfung gegen Covid-19 sind Impfungen wichtig für unser aller Gesundheit. Viele lebenswichtige Impfungen werden vernachlässigt oder sind in der öffentlichen Wahrnehmung weniger präsent. Genau das soll die Kampagne verhindern. Das Ziel ist es, Jugendliche und junge Erwachsene auf das Thema aufmerksam zu machen. Die Kampagne soll zeigen, dass schon ein kleiner Piekser Leben retten kann. Gleichzeitig bietet sie auch die Möglichkeit, den Aufruf direkt umzusetzen. Lokale und terminbezogene Veranstaltungen helfen dabei. Dieses Projekt versucht durch eine Info-Tour, der Unwissenheit über Impfungen entgegenzuwirken. KW - Impfen KW - Impftagtour KW - Corona KW - Medizin KW - Gesundheitsvorsorge Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Richter, Charlotte A1 - Braunstein, Bjoern A1 - Stäudle, Benjamin A1 - Attias, Julia A1 - Suess, Alexander A1 - Weber, Tobias A1 - Mileva, Katja N. A1 - Rittweger, Joern A1 - Green, David A. A1 - Albracht, Kirsten T1 - Gastrocnemius medialis contractile behavior is preserved during 30% body weight supported gait training JF - Frontiers in Sports and Active Living N2 - Rehabilitative body weight supported gait training aims at restoring walking function as a key element in activities of daily living. Studies demonstrated reductions in muscle and joint forces, while kinematic gait patterns appear to be preserved with up to 30% weight support. However, the influence of body weight support on muscle architecture, with respect to fascicle and series elastic element behavior is unknown, despite this having potential clinical implications for gait retraining. Eight males (31.9 ± 4.7 years) walked at 75% of the speed at which they typically transition to running, with 0% and 30% body weight support on a lower-body positive pressure treadmill. Gastrocnemius medialis fascicle lengths and pennation angles were measured via ultrasonography. Additionally, joint kinematics were analyzed to determine gastrocnemius medialis muscle–tendon unit lengths, consisting of the muscle's contractile and series elastic elements. Series elastic element length was assessed using a muscle–tendon unit model. Depending on whether data were normally distributed, a paired t-test or Wilcoxon signed rank test was performed to determine if body weight supported walking had any effects on joint kinematics and fascicle–series elastic element behavior. Walking with 30% body weight support had no statistically significant effect on joint kinematics and peak series elastic element length. Furthermore, at the time when peak series elastic element length was achieved, and on average across the entire stance phase, muscle–tendon unit length, fascicle length, pennation angle, and fascicle velocity were unchanged with respect to body weight support. In accordance with unchanged gait kinematics, preservation of fascicle–series elastic element behavior was observed during walking with 30% body weight support, which suggests transferability of gait patterns to subsequent unsupported walking. KW - AlterG KW - rehabilitation KW - gait KW - walking KW - ultrasound imaging KW - series elastic element behavior KW - muscle fascicle behavior KW - unloading Y1 - 2021 U6 - https://doi.org/10.3389/fspor.2020.614559 SN - 2624-9367 VL - 2021 IS - 2 PB - Frontiers CY - Lausanne ER - TY - JOUR A1 - Richter, Charlotte A1 - Braunstein, Björn A1 - Stäudle, Benjamin A1 - Attias, Julia A1 - Süss, Alexander A1 - Weber, Tobias A1 - Mileva, Katya N. A1 - Rittweger, Jörn A1 - Green, David A. A1 - Albracht, Kirsten T1 - Gastrocnemius medialis contractile behavior during running differs between simulated Lunar and Martian gravities JF - Scientific reports N2 - The international partnership of space agencies has agreed to proceed forward to the Moon sustainably. Activities on the Lunar surface (0.16 g) will allow crewmembers to advance the exploration skills needed when expanding human presence to Mars (0.38 g). Whilst data from actual hypogravity activities are limited to the Apollo missions, simulation studies have indicated that ground reaction forces, mechanical work, muscle activation, and joint angles decrease with declining gravity level. However, these alterations in locomotion biomechanics do not necessarily scale to the gravity level, the reduction in gastrocnemius medialis activation even appears to level off around 0.2 g, while muscle activation pattern remains similar. Thus, it is difficult to predict whether gastrocnemius medialis contractile behavior during running on Moon will basically be the same as on Mars. Therefore, this study investigated lower limb joint kinematics and gastrocnemius medialis behavior during running at 1 g, simulated Martian gravity, and simulated Lunar gravity on the vertical treadmill facility. The results indicate that hypogravity-induced alterations in joint kinematics and contractile behavior still persist between simulated running on the Moon and Mars. This contrasts with the concept of a ceiling effect and should be carefully considered when evaluating exercise prescriptions and the transferability of locomotion practiced in Lunar gravity to Martian gravity. KW - Bone quality and biomechanics KW - Environmental impact KW - Skeletal muscle KW - Tendons KW - Ultrasound Y1 - 2021 U6 - https://doi.org/10.1038/s41598-021-00527-9 SN - 2045-2322 N1 - Corresponding author: Charlotte Richter VL - 11 IS - Article number: 22555 PB - Springer Nature CY - London ER - TY - JOUR A1 - Zabirov, Alexander A1 - Schleser, Markus A1 - Bucherer, Sebastian T1 - Füge- und Dichtkonzept für einen Leichtbauverbrennungsmotor JF - adhäsion KLEBEN & DICHTEN Y1 - 2021 U6 - https://doi.org/10.1007/s35145-021-0531-5 SN - 2192-8681 VL - 65 IS - 11 SP - 12 EP - 19 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Götten, Falk A1 - Finger, Felix A1 - Havermann, Marc A1 - Braun, Carsten A1 - Marino, M. A1 - Bil, C. T1 - Full configuration drag estimation of short-to-medium range fixed-wing UAVs and its impact on initial sizing optimization JF - CEAS Aeronautical Journal N2 - The paper presents the derivation of a new equivalent skin friction coefficient for estimating the parasitic drag of short-to-medium range fixed-wing unmanned aircraft. The new coefficient is derived from an aerodynamic analysis of ten different unmanned aircraft used for surveillance, reconnaissance, and search and rescue missions. The aircraft is simulated using a validated unsteady Reynolds-averaged Navier Stokes approach. The UAV’s parasitic drag is significantly influenced by the presence of miscellaneous components like fixed landing gears or electro-optical sensor turrets. These components are responsible for almost half of an unmanned aircraft’s total parasitic drag. The new equivalent skin friction coefficient accounts for these effects and is significantly higher compared to other aircraft categories. It is used to initially size an unmanned aircraft for a typical reconnaissance mission. The improved parasitic drag estimation yields a much heavier unmanned aircraft when compared to the sizing results using available drag data of manned aircraft. KW - Parasitic drag KW - UAV KW - CFD KW - Aircraft sizing Y1 - 2021 U6 - https://doi.org/10.1007/s13272-021-00522-w SN - 1869-5590 (Online) SN - 1869-5582 (Print) N1 - Corresponding author: Falk Götten VL - 12 SP - 589 EP - 603 PB - Springer CY - Berlin ER - TY - THES A1 - Vorholt, Lara T1 - Fitted Fashion: Sizing-Lösung zur Steigerung der Konversion & Reduzierung von E-Commerce-Retouren N2 - Die Zahl der Nutzenden beim Onlineshopping ist in den letzten Jahren deutlich gewachsen. Eines der größten Probleme dabei: Die Retouren. Sowohl die Wirtschaft als auch die Umwelt leiden darunter. Der Hauptgrund für Rücksendungen sind dabei Schwierigkeiten bei der Auswahl der individuell richtigen Größe. Das Ziel dieses Projektes ist es daher, eine 3D-Körperscan-App zu erstellen. Mit dieser ist es möglich, einen auf die eigenen Körpermaße angepassten Avatar zu erstellen und eine angepasste Stilberatung für die jeweilige Körperform angeboten zu bekommen. Zudem gibt es eine Applikation in Form eines Software Development Kits, welches in Onlineshops eingebunden werden kann. Mit Hilfe der Applikation bekommen Konsumenten die richtige Größe auch beim Onlineshopping angezeigt und tätigen so weniger Fehlkäufe. Dies bringt nicht nur Vorteile für die Umwelt mit sich und den Unternehmen eine massive Kostenersparnis durch die Einsparung von Retouren, Müll und Personal, sondern schlussendlich auch eine zufriedenere Kundschaft. KW - Lidarscanner KW - Mode KW - Innovation KW - Nachhaltig KW - E-Commerce Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Büchel, Carolin T1 - Fitnesssport: Gestaltung eines mobilen Outdoor-Trainingssystems N2 - Der Wunsch nach Gesundheit und Individualisierung der eigenen Freizeit als Ausgleich zum Alltag ist heute in der Gesellschaft so ausgeprägt wie noch nie. Dabei sind die positiven Auswirkungen körperlicher Aktivität auf das Immunsystem, die Lebenserwartung und die Leistungsfähigkeit immer bekannter. Diese Abschlussarbeit greift die erkannte Entwicklung und den wachsenden Wunsch der Nutzenden nach individuellem Fitnesstraining im Freien auf. Das entstandene Outdoor-Trainingssystem „TREICK“ ermöglicht ein mobiles, orts- und zeitunabhängiges Training der eigenen Fitness. Durch „TREICK“ kann der Sportler physiologisch sinnvolle Eigengewichtsübungen in einer selbst gewählten Umgebung ausführen, wodurch das Wohlbefinden und damit die Gesundheit gefördert werden kann. Das System kann als Rucksack oder Fahrradtasche transportiert werden, wobei die Trainingsmatte als Verpackung dient. KW - Outdoorfitness KW - Fitness KW - Training KW - Gesundheit KW - im Freien Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Heuermann, Holger A1 - Harzheim, Thomas A1 - Cronenbroeck, Tobias T1 - First SIMO harmonic radar based on the SFCW concept and the HR transfer function JF - Remote sensing N2 - This paper presents a new SIMO radar system based on a harmonic radar (HR) stepped frequency continuous wave (SFCW) architecture. Simple tags that can be electronically individually activated and deactivated via a DC control voltage were developed and combined to form an MO array field. This HR operates in the entire 2.45 GHz ISM band for transmitting the illumination signal and receives at twice the stimulus frequency and bandwidth centered around 4.9 GHz. This paper presents the development, the basic theory of a HR system for the characterization of objects placed into the propagation path in-between the radar and the reflectors (similar to a free-space measurement with a network analyzer) as well as first measurements performed by the system. Further detailed measurement series will be made available later on to other researchers to develop AI and machine learning based signal processing routines or synthetic aperture radar algorithms for imaging, object recognition, and feature extraction. For this purpose, the necessary information is published in this paper. It is explained in detail why this SIMO-HR can be an attractive solution augmenting or replacing existing systems for radar measurements in production technology for material under test measurements and as a simplified MIMO system. The novel HR transfer function, which is a basis for researchers and developers for material characterization or imaging algorithms, is introduced and metrologically verified in a well traceable coaxial setup. KW - MUT measurement; scanner KW - transponder KW - SFCW KW - harmonic radar KW - nonlinear radar Y1 - 2021 U6 - https://doi.org/10.3390/rs13245088 SN - 2072-4292 N1 - This article belongs to the Special Issue "Nonlinear Junction Detection and Harmonic Radar" VL - 13 IS - 24 PB - MDPI CY - Basel ER - TY - CHAP A1 - Bensberg, Frank A1 - Auth, Gunnar A1 - Czarnecki, Christian ED - Czarnecki, Christian ED - Fettke, Peter T1 - Finding the perfect RPA match : a criteria-based selection method for RPA solutions T2 - Robotic process automation : Management, technology, applications N2 - The benefits of robotic process automation (RPA) are highly related to the usage of commercial off-the-shelf (COTS) software products that can be easily implemented and customized by business units. But, how to find the best fitting RPA product for a specific situation that creates the expected benefits? This question is related to the general area of software evaluation and selection. In the face of more than 75 RPA products currently on the market, guidance considering those specifics is required. Therefore, this chapter proposes a criteria-based selection method specifically for RPA. The method includes a quantitative evaluation of costs and benefits as well as a qualitative utility analysis based on functional criteria. By using the visualization of financial implications (VOFI) method, an application-oriented structure is provided that opposes the total cost of ownership to the time savings times salary (TSTS). For the utility analysis a detailed list of functional criteria for RPA is offered. The whole method is based on a multi-vocal review of scientific and non-scholarly literature including publications by business practitioners, consultants, and vendors. The application of the method is illustrated by a concrete RPA example. The illustrated structures, templates, and criteria can be directly utilized by practitioners in their real-life RPA implementations. In addition, a normative decision process for selecting RPA alternatives is proposed before the chapter closes with a discussion and outlook. KW - robotic process automation KW - business process automation KW - commercial offthe- shelf solutions KW - software evaluation KW - software selection Y1 - 2021 SN - 978-3-11-067677-8 SN - 978-3-11-067669-3 SN - 9783110676686 U6 - https://doi.org/10.1515/9783110676693-201 SP - 47 EP - 75 PB - De Gruyter CY - Oldenbourg ER - TY - THES A1 - May, Leonie T1 - Finding Love: Ein animierter Kurzfilm N2 - Bei "Finding Love - Ein animierter Kurzfilm" handelt es sich um einen 2D-Animationsshort. Er erzählt die Geschichte von zwei jungen Männern, welche beide ähnliche Trauer erfahren mussten und sich gegenseitig wieder zurück auf die Beine helfen. Das Ziel dieser Arbeit ist es, ohne Worte und vor allem mit Bildgewalt bestimmte Emotionen zu vermitteln. Der Eigeninhalt der Arbeit umfasst jeden Schritt der Produktion eines animierten Kurzfilms. Dazu gehören Konzeptzeichnungen, Storyboard, Hintergründe, Animation, Cleanup und Vertonung. Besonderes Augenmerk wird bei der Produktion auf die Animation gelegt, insbesondere durch die Komplexität der animierten Charaktere. Letztendlich wird eine herzerwärmende, doch bittersüße und traurige Geschichte erzählt, welche den Zuschauer tief berührt. KW - Film KW - Animation KW - 2D Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Bornheim, Tobias A1 - Grieger, Niklas A1 - Bialonski, Stephan T1 - FHAC at GermEval 2021: Identifying German toxic, engaging, and fact-claiming comments with ensemble learning T2 - Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021 Y1 - 2021 U6 - https://doi.org/10.48415/2021/fhw5-x128 N1 - KONVENS (Konferenz zur Verarbeitung natürlicher Sprache/Conference on Natural Language Processing) 2021, 6. - 9. September 2021, Düsseldorf SP - 105 EP - 111 PB - Heinrich Heine University CY - Düsseldorf ER - TY - CHAP A1 - Tran, Ngoc Trinh A1 - Staat, Manfred T1 - FEM shakedown analysis of Kirchhoff-Love plates under uncertainty of strength T2 - Proceedings of UNCECOMP 2021 N2 - A new formulation to calculate the shakedown limit load of Kirchhoff plates under stochastic conditions of strength is developed. Direct structural reliability design by chance con-strained programming is based on the prescribed failure probabilities, which is an effective approach of stochastic programming if it can be formulated as an equivalent deterministic optimization problem. We restrict uncertainty to strength, the loading is still deterministic. A new formulation is derived in case of random strength with lognormal distribution. Upper bound and lower bound shakedown load factors are calculated simultaneously by a dual algorithm. Y1 - 2021 SN - 978-618-85072-6-5 U6 - https://doi.org/10.7712/120221.8041.19047 N1 - UNCECOMP 2021, 4th International Conference on Uncertainty Quantification in Computational Sciences and Engineering, streamed from Athens, Greece, 28–30 June 2021. SP - 323 EP - 338 ER - TY - JOUR A1 - Bung, Daniel Bernhard T1 - Extreme flooding in Western Germany: some thoughts on hazards, return periods and risk JF - Hydrolink N2 - The low-pressure system Bernd involved extreme rainfalls in the Western part of Germany in July 2021, resulting in major floods, severe damages and a tremendous number of casualties. Such extreme events are rare and full flood protection can never be ensured with reasonable financial means. But still, this event must be starting point to reconsider current design concepts. This article aims at sharing some thoughts on potential hazards, the selection of return periods and remaining risk with the focus on Germany. Y1 - 2021 IS - 4 SP - 108 EP - 113 PB - International Association for Hydro-Environment Engineering and Research (IAHR) CY - Madrid ER - TY - CHAP A1 - Butenweg, Christoph A1 - Bursi, Oreste S. A1 - Nardin, Chiara A1 - Lanese, Igor A1 - Pavese, Alberto A1 - Marinković, Marko A1 - Paolacci, Fabrizio A1 - Quinci, Gianluca T1 - Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities T2 - Conference Proceedings: Pressure Vessels & Piping Conference Vol.5 N2 - Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed. KW - industrial facilities KW - piping KW - installations KW - seismic loading KW - earthquakes Y1 - 2021 SN - 9780791885352 U6 - https://doi.org/10.1115/PVP2021-61696 N1 - ASME 2021 Pressure Vessels & Piping Conference, July 13–15, 2021, Virtual, Online PB - American Society of Mechanical Engineers (ASME) CY - New York ER - TY - CHAP A1 - Milijaš, Aleksa A1 - Šakić, Bogdan A1 - Marinković, Marko A1 - Butenweg, Christoph ED - Papadrakakis, Manolis ED - Fragiadakis, Michalis T1 - Experimental investigation of behaviour of masonry infilled RC frames under out-of-plane loading T2 - Proceedings of COMPDYN 2021 N2 - Masonry infills are commonly used as exterior or interior walls in reinforced concrete (RC) frame structures and they can be encountered all over the world, including earthquake prone regions. Since the middle of the 20th century the behaviour of these non-structural elements under seismic loading has been studied in numerous experimental campaigns. However, most of the studies were carried out by means of in-plane tests, while there is a lack of out-of-plane experimental investigations. In this paper, the out-of-plane tests carried out on full scale masonry infilled frames are described. The results of the out-of-plane tests are presented in terms of force-displacement curves and measured out-of-plane displacements. Finally, the reliability of existing analytical approaches developed to estimate the out-of-plane strength of masonry infills is examined on presented experimental results. KW - Seismic loading KW - Masonry infill KW - Out-of-plane load KW - Out-of-plane strength Y1 - 2021 SN - 978-618-85072-5-8 U6 - https://doi.org/10.7712/120121.8528.18914 SN - 2623-3347 N1 - COMPDYN 2021, 28-30 June 2021, Streamed from Athens, Greece, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering SP - 829 EP - 846 PB - National Technical University of Athens CY - Athen ER - TY - CHAP A1 - Leise, Philipp A1 - Altherr, Lena T1 - Experimental evaluation of resilience metrics in a fluid system T2 - Mastering Uncertainty in Mechanical Engineering Y1 - 2021 SN - 978-3-030-78356-3 N1 - Unterkapitel des Kapitels "Strategies for Mastering Uncertainty" SP - 442 EP - 447 PB - Springer CY - Cham ER - TY - CHAP A1 - Kroniger, Daniel A1 - Horikawa, Atsushi A1 - Funke, Harald A1 - Pfäffle, Franziska A1 - Kishimoto, Tsuyoshi A1 - Okada, Koichi T1 - Experimental and numerical investigation on the effect of pressure on micromix hydrogen combustion T2 - Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3A: Combustion, Fuels, and Emissions N2 - The micromix (MMX) combustion concept is a DLN gas turbine combustion technology designed for high hydrogen content fuels. Multiple non-premixed miniaturized flames based on jet in cross-flow (JICF) are inherently safe against flashback and ensure a stable operation in various operative conditions. The objective of this paper is to investigate the influence of pressure on the micromix flame with focus on the flame initiation point and the NOx emissions. A numerical model based on a steady RANS approach and the Complex Chemistry model with relevant reactions of the GRI 3.0 mechanism is used to predict the reactive flow and NOx emissions at various pressure conditions. Regarding the turbulence-chemical interaction, the Laminar Flame Concept (LFC) and the Eddy Dissipation Concept (EDC) are compared. The numerical results are validated against experimental results that have been acquired at a high pressure test facility for industrial can-type gas turbine combustors with regard to flame initiation and NOx emissions. The numerical approach is adequate to predict the flame initiation point and NOx emission trends. Interestingly, the flame shifts its initiation point during the pressure increase in upstream direction, whereby the flame attachment shifts from anchoring behind a downstream located bluff body towards anchoring directly at the hydrogen jet. The LFC predicts this change and the NOx emissions more accurately than the EDC. The resulting NOx correlation regarding the pressure is similar to a non-premixed type combustion configuration. KW - NOx emissions KW - hydrogen KW - combustor KW - gas turbine Y1 - 2021 U6 - https://doi.org/10.1115/GT2021-58926 N1 - ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, June 7–11, 2021, Virtual, Online. Paper No: GT2021-58926, V03AT04A025 PB - ASME CY - New York, NY ER - TY - THES A1 - Eschbach, Lara T1 - ESPACE – ESCAPE N2 - Die Arbeit „ESPACE-ESCAPE“ befasst sich mit der Frage, was entstehen kann, wenn man sich bewusst auf das einlässt, was ist, und welche ungeahnten Räume sich eröffnen, wenn dieser Zustand erst einmal akzeptiert und somit erkundet werden kann. Die Fotografien erzählen in ihrem Zusammenspiel von einer Suche, von Niedergeschlagenheit und dem Gefühl nicht von der Stelle zu kommen. Davon, sich im Kreis zu bewegen. Von vorbeiziehenden Tagen, Wochen und Monaten. Dem Wechsel zwischen Licht und Dunkelheit, deren Grenzen sich auflösen und ineinander übergehen. Dem Wunsch danach, es der Natur gleichzutun und in einen Schlaf zu fallen. Nur für eine kurze lange Weile dem Winter entgehen. So eine Art Winterschlaf eben. Die Fotografien bündeln dieses kollektive Gefühl als melancholische Sicht auf den unendlich erscheinenden Winter und dennoch: Zwischen den Zeilen liegen eine verborgene Schönheit, Hoffnung und Neuanfang. KW - Fotografie KW - Winter KW - Depression KW - Traum KW - Schlaf Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Henkenjohann, Janne T1 - Erlebnisraum Theater: Entwicklung des Corporate Designs sowie crossmedialer Konzepte N2 - Die Kunst des Theaters ist alt. Gegenwärtig zählt sie allerdings immer noch zu den wichtigsten Trägern des künstlerischen Kulturguts. Doch die Welt in der wir leben hat sich in den letzten Jahren deutlich verändert. Sie ist komplexer geworden. Die Anzahl der losen Informationen, die in unsere Wahrnehmungsbereiche hineinragen, hat sich explosionsartig erhöht. Ein großer Anteil dieser Veränderung ist auf die Digitalisierung verschiedener Lebensbereiche zurückzuführen. Die Werkzeuge, welche im Zuge der Digitalisierung kreiert wurden, werden von den meisten heute selbstverständlich genutzt. Doch was bedeutet diese neue Entwicklung für das Theater und wie sollte es auf diese Veränderungen reagieren? Als gestalterische Antwort entstand ein neues Erscheinungsbild, welches crossmedial sowohl die analogen Säulen des Theaters, als auch die neuen digitalen Formen des Alltags auffangen und kommunizieren kann. KW - Erscheinungsbild KW - Corporate Identity KW - Theater KW - Digitalität KW - Crossmedial Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Butenweg, Christoph A1 - Kubalski, Thomas A1 - El-Deib, Khaled A1 - Gellert, Christoph ED - Jesse, Dirk T1 - Erdbebennachweis von Mauerwerksbauten nach DIN EN 1998-1/NA-2021 JF - Bautechnik : Zeitschrift für den gesamten Ingenieurbau N2 - Mauerwerksbauten in Deutschland sind mit Einführung des nationalen Anwendungsdokuments DIN EN 1998-1/NA auf Grundlage einer neuen probabilistischen Erdbebenkarte nachzuweisen. Für erfolgreiche Erdbebennachweise üblicher Grundrissformen von Mauerwerksbauten stehen in dem zukünftigen Anwendungsdokument neue rechnerische Nachweismöglichkeiten zur Verfügung, mit denen die Tragfähigkeitsreserven von Mauerwerksbauten in der Baupraxis mit einem überschaubaren Aufwand besser in Ansatz gebracht werden können. Das Standardrechenverfahren ist weiterhin der kraftbasierte Nachweis, der nun mit höheren Verhaltensbeiwerten im Vergleich zur DIN 4149 durchgeführt werden kann. Die höheren Verhaltensbeiwerte basieren auf der besseren Ausnutzung der gebäudespezifischen Verformungsfähigkeit und Energiedissipation sowie der Lastumverteilung der Schubkräfte im Grundriss mit Ansatz von Rahmentragwirkung durch Wand-Deckeninteraktionen. Alternativ dazu kann ein nichtlinearer Nachweis auf Grundlage von Pushover-Analysen zur Anwendung kommen. Vervollständigt werden die Regelungen für Mauerwerksbauten durch neue Regelungen für nichttragende Innenwände und Außenmauerschalen. Der vorliegende Beitrag stellt die Grundlagen und Hintergründe der neuen rechnerischen Nachweise in DIN EN 1998-1/NA vor und demonstriert deren Anwendung an einem Beispiel aus der Praxis. Y1 - 2021 U6 - https://doi.org/10.1002/bate.202100064 SN - 1437-0999 SN - 0005-6820, 0932-8351 VL - 98 IS - 11 SP - 852 EP - 863 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - El-Deib, Khaled A1 - Butenweg, Christoph A1 - Klinkel, Sven ED - Jesse, Dirk T1 - Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erhöhten Verhaltensbeiwerten JF - Mauerwerk N2 - Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten führt dazu, dass bereits heute Standsicherheitsnachweise für Gebäude mit üblichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr geführt werden können. Diese Problematik wird sich in Deutschland mit der Einführung kontinuierlicher probabilistischer Erdbebenkarten weiter verschärfen. Aufgrund der Erhöhung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht berücksichtigten Tragfähigkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verfügbar zu machen. Der vorliegende Beitrag stellt ein Konzept für die gebäudespezifische Ermittlung von erhöhten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsfähigkeit und Energiedissipation sowie die Überfestigkeiten berücksichtigt werden. Für die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von Wänden und Geschossdecken durch einen Einspanngrad beschrieben werden. Für die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingeführt, mit dem die Interaktion von Wänden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erhöhten gebäudespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erhöhten Verhaltensbeiwerten für dieses Gebäude liegen deutlich näher an den Ergebnissen nichtlinearer Nachweise und somit bleiben übliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenansätzen nachweisbar. N2 - Seismic verification of masonry buildings based on realistic calculation models and increased behavior factorsWith the application of the traditional linear verification con­cept to masonry structures it is already no longer possible to carry out structural safety verifications even for buildings with standard ground plan configurations in areas with moderate seismicity. This problem will be exacerbated in Germany with the introduction of continuous probabilistic earthquake maps. Due to the increased seismic actions, it is necessary to make the existing load­bearing capacity reserves that have not yet been taken into account available in comprehensible verifica­tion concepts in construction practice. This article presents a concept for the building­specific determination of increased behavior factors. The behavior factors are composed of three components, which take into account the load redistribution in ground plans, the deformation capability and energy dissipation and all kinds of overstrength effects. For the calculation of these three components, a non­linear verification concept based on pushover analyses is applied, in which the interac­tions of walls and floor slabs are described by a level of re­straint. A non­linear modeling approach of the overall building is introduced for the determination of the restraint levels, with which the interaction of walls and floor slabs can be simulated. The results of the linear verifications with increased behavior factors for this building are significantly closer to the results of non­linear verifications and thus the standard ground plan con­figurations in areas with moderate seismicity can still be veri­fied with the traditional linear calculation approaches. KW - Mauerwerksbauten KW - Erdbebeneinwirkung KW - Bemessung KW - Verhaltensbeiwerte KW - Pushover­Analysen Y1 - 2021 U6 - https://doi.org/10.1002/dama.202110014 SN - 1437-1022 SN - 1432-3427 VL - 2021 IS - 3 SP - 110 EP - 119 PB - Wiley CY - Weinheim ER - TY - CHAP A1 - Butenweg, Christoph A1 - Gellert, Christoph A1 - Meyer, Udo T1 - Erdbebenbemessung bei Mauerwerksbauten T2 - Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau N2 - Der vorliegende Beitrag stellt den seismischen Nachweis von Mauerwerksbauten in Deutschland auf Grundlage der DIN EN 1998‐1/NA vor, wobei auch die wesentlichen Änderungen zu der Norm DIN 4149 vergleichend erläutert werden. Vorgestellt werden die Definition der Erdbebeneinwirkung, das seismische Verhalten von Mauerwerksbauten und die Erläuterung der Rechenverfahren. Darauf aufbauend wird die Anwendung an drei Praxisbeispielen demonstriert. Y1 - 2021 SN - 9783433032930 SN - 9783433610732 U6 - https://doi.org/10.1002/9783433610732.ch12 SP - 329 EP - 355 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Alexyuk, Madina A1 - Bogoyavlenskiy, Andrey A1 - Alexyuk, Pavel A1 - Moldakhanov, Yergali A1 - Berezin, Vladimir A1 - Digel, Ilya T1 - Epipelagic microbiome of the Small Aral Sea: Metagenomic structure and ecological diversity JF - MicrobiologyOpen N2 - Microbial diversity studies regarding the aquatic communities that experienced or are experiencing environmental problems are essential for the comprehension of the remediation dynamics. In this pilot study, we present data on the phylogenetic and ecological structure of microorganisms from epipelagic water samples collected in the Small Aral Sea (SAS). The raw data were generated by massive parallel sequencing using the shotgun approach. As expected, most of the identified DNA sequences belonged to Terrabacteria and Actinobacteria (40% and 37% of the total reads, respectively). The occurrence of Deinococcus-Thermus, Armatimonadetes, Chloroflexi in the epipelagic SAS waters was less anticipated. Surprising was also the detection of sequences, which are characteristic for strict anaerobes—Ignavibacteria, hydrogen-oxidizing bacteria, and archaeal methanogenic species. We suppose that the observed very broad range of phylogenetic and ecological features displayed by the SAS reads demonstrates a more intensive mixing of water masses originating from diverse ecological niches of the Aral-Syr Darya River basin than presumed before. KW - ecological structure KW - metagenomics KW - microbial diversity KW - shotgun sequencing KW - Small Aral Sea Y1 - 2021 U6 - https://doi.org/10.1002/mbo3.1142 SN - 2045-8827 N1 - Corresponding author: Ilya Digel VL - 10 IS - 1 SP - 1 EP - 10 PB - Wiley CY - Weinheim ER - TY - THES A1 - Mann, Judith T1 - Entwicklung eines neuen Erscheinungsbildes für das Museum für Ostasiatische Kunst Köln N2 - Seit dem Zeitpunkt seiner Gründung im Jahr 1909 lautet der Auftrag des Kölner Museums für Ostasiatische Kunst, der europäischen Gesellschaft die Kunst Ostasiens nahezubringen, für ein besseres Verständnis und die Wertschätzung seiner Kultur zu sorgen und somit auch Rassismus und kolonialistischem Denken entgegenzuwirken – ein Anliegen, welches noch heute von unveränderter Relevanz und Dringlichkeit ist. Im Zentrum des neuen Erscheinungsbildes steht der gestürzte Buchstabe K und die somit entstehende Kombination von horizontaler und vertikaler, traditionell ostasiatischer Leserichtung deutet auf visueller Ebene ein Zusammenspiel zwischen den Kulturen an. Die Farbgebung des neuen Erscheinungsbildes greift die ruhige Atmosphäre des Museums auf und sorgt in Kombination mit einem streng gegliederten Raster für klare Struktur und Orientierung. KW - Museum KW - Ostasiatisch KW - Kunst KW - Köln KW - Kultur Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Krier, Tessy T1 - Entwicklung eines Multifunktionsdrucksystems nach dem Modell der Kreislaufwirtschaft N2 - „Printen“ ist ein Multifunktionsdrucksystem, welches dem Nutzer ermöglicht, es zu reparieren. Das Elektroschrottaufkommen der Welt steigt, deshalb legte die EU neue Maßnahmen zum Ökodesign fest. Diese sollen die Reparierbarkeit von Produkten fördern und geplante Obsoleszenz unterbinden. Ein Vorzeigebeispiel für geplanten Obsoleszenz ist der Drucker. Das System besteht aus einem Drucker und Scanner, an dem der Nutzer Reparaturen vornehmen kann. Dadurch soll eine stärkere Bindung zum selbst reparierten Gerät entstehen und die Lebensdauer verlängert werden. Durch ein öffnungsfähiges Gehäuse wird die Reparatur ermöglicht. Eine Farbcodierung im Inneren erleichtert die Orientierung und visualisiert zusammengehörende Elemente. Außerdem wurde der Aufbau des Druckers aufgeräumt und vereinfacht. So können einzelne Komponenten problemlos ausgetauscht werden. Ganz nach der Devise: Einfach printen! KW - Kreislaufwirtschaft KW - Drucker KW - Reparatur KW - Scanner KW - Bürozubehör Y1 - 2021 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Mros, Christina T1 - Entwicklung eines Erscheinungsbildes sowie einer Kampagne für die Allianz Chronischer Seltener Erkrankungen N2 - Die Allianz Chronischer Seltener Erkrankungen (ACHSE) ist das einzige krankheitsübergreifende Netzwerk von und für Menschen mit einer seltenen Erkrankung in Deutschland. Insgesamt sind 4 Millionen Menschen in Deutschland von einer der rund 8.000 seltenen Krankheiten betroffen. Durch die Seltenheit der verschiedenen Krankheiten ist es oft schwer, Experten zu finden, die richtige Versorgung sicherzustellen oder Studien durchzuführen. Betroffene fühlen sich oft nicht wahrgenommen und alleine gelassen. Die ACHSE dient als unabhängige Schnittstelle und Knotenpunkt zwischen Betroffenen, Regierung, Politik und Wirtschaft. Gemeinsam bündeln sich hier 130 Patientenorganisationen unter einem Dach, um die Betroffenen in den Fokus zu rücken. Ziel der Bachelorarbeit ist die Entwicklung eines Erscheinungsbildes sowie einer Kampagne, die das Thema mehr ins Bewusstsein der Öffentlichkeit bringt und informiert. KW - Pro bono KW - Corporate Design KW - Redesign KW - Rare Diseases KW - Seltene Erkrankungen Y1 - 2021 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER -