TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis
T2  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit
N2  - Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.
KW  - Solar Sail
KW  - Asteroid Deflection
KW  - Planetary Protection
KW  - Trajectory Optimization
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.2006-6178
N1  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 21 August 2006 - 24 August 2006, Keystone, Colorado(USA).
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Schneider, Gerd
T1  - Semantic Roomobjects for Conceptual Design Support : A Knowledge-based Approach
N2  - In: Computer Aided Architectural Design Futures 2005 2005, Part 4, 207-216, DOI: http://dx.doi.org/10.1007/1-4020-3698-1_19 The conceptual design at the beginning of the building construction process is essential for the success of a building project. Even if some CAD tools allow elaborating conceptual sketches, they rather focus on the shape of the building elements and not on their functionality. We introduce semantic roomobjects and roomlinks, by way of example to the CAD tool ArchiCAD. These extensions provide a basis for specifying the organisation and functionality of a building and free architects being forced to directly produce detailed constructive sketches. Furthermore, we introduce consistency analyses of the conceptual sketch, based on an ontology containing conceptual relevant knowledge, specific to one class of buildings.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
SN  - 978-1-4020-3460-2
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, Nils
T1  - Visual Knowledge Specification for Conceptual Design
N2  - Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Braun, Carsten
A1  - Boucke, Alexander
A1  - Ballmann, Josef
T1  - Numerical prediction of the wing deformation of a high speed transport aircraft type wind tunnel model by direct aeroelastic simulation
T2  - Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : München, June 28 - July 1, 2005. DGLR-Bericht. 2005,04
Y1  - 2005
SN  - 3-932182-43-X
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
A1  - Lucas, K.
ED  - Kjelstrup, Signe
T1  - Simulation of industrial energy supply systems with integrated cost optimization
T2  - Proceedings of ECOS 2005, the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems : Trondheim, Norway, June 20 - 22, 2005. - Vol. 2
Y1  - 2005
SN  - 82-519-2041-8
N1  - CD-ROM-Ausg. u.d.T.: Shaping our future energy systems
SP  - 627
EP  - 634
PB  - Tapir Academic Press
CY  - Trondheim
ER  - 
TY  - CHAP
A1  - Plescher, Engelbert
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
T1  - Technical aspects of liquid diffusion model experiments
T2  - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1  - 2005
SP  - 5019
EP  - 5025
PB  - International Astronautical Federation
CY  - Paris
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
T1  - Platform of Excellence in "Energy and Environment"
N2  - The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment“ in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in Jülich and Aachen and of two scientific institutes with different topics: – NOWUM-Energy with emphasis on efficient and economic energy conversion – The Solar Institute Jülich – SIJ – being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion – nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems“ and „Nuclear Applications“
KW  - Energietechnik
KW  - Kernenergie
KW  - Umwelt
KW  - Energy
KW  - environment
KW  - Energy Systems
KW  - Nuclear Applications
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
A1  - Deuster, M.
T1  - Temperature measurement to optimise the burning process
N2  - One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used.
KW  - Pyrometrie
KW  - Temperaturmessung
KW  - temperature measurement
KW  - acoustic pyrometry
KW  - steam production
KW  - flue gas components
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Service based Bluetooth dual-hop networks using CORBA
T2  - Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria
Y1  - 2005
SN  - 0-88986-457-8
SP  - 724
EP  - 728
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - http://dx.doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Karimi, Iman
A1  - Butenweg, Christoph
A1  - Toll, Britta
T1  - Vulnerability assessment of industrial facilities
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.34
SP  - 34, 73
EP  - 75
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - A seismic design procedure for masonry buildings
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.193
SP  - 465
EP  - 467
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Grunendahl, A.
A1  - de Rochefort, E.
A1  - Butenweg, Christoph
T1  - Numerical models for investigating the causes of low back pain due to whole-body vibrations
T2  - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.
Y1  - 2005
SN  - 978-972-8469-37-3
SP  - 905
EP  - 914
PB  - IST Press
CY  - Lisbon
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Neumann, M.
A1  - Butenweg, Christoph
A1  - Holler, Stefan
T1  - Modelling of textile strengthened masonry
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.184
SP  - 447
EP  - 448
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Krämer, Sebastian
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers
T2  - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ...
Y1  - 2005
SN  - 978-963-8241-68-9
SP  - 2759
EP  - 2764
PB  - OPAKFI Tud. Egyesület
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - El Ouardi, A.
A1  - Streckert, J.
A1  - Hansen, V.
T1  - Efficient calculation of human exposure in front of base station antennas by a combination of the FDTD and Hybrid(2)-method
T2  - Proceedings of the 16th International Zurich Symposium on Electromagnetic Compatibility, Topical Meeting on Biomedical EMC, Zurich, Switzerland, February 2005
Y1  - 2005
SN  - 3-9521199-9-7
SP  - 115
EP  - 118
PB  - ETH Zentrum
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Hammer, Andreas
A1  - Vieth, Matthias
A1  - Maier, Frank
T1  - Co-Plot as a new multivariate analysis method for operations management research?
T2  - Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter
Y1  - 2005
SN  - 963-218-455-6
SP  - 1007
EP  - 1016
ER  - 
TY  - CHAP
A1  - Kunfermann, Philipp
A1  - Drumm, Christian
T1  - Lifting XML schemas to ontologies - the concept finder algorithm
T2  - MEDIATE 2005 First International Workshop on Mediation in Semantic Web Services    Proceedings of the First International Workshop on Mediation in Semantic Web Services (MEDIATE 2005)
Y1  - 2005
SP  - 113
EP  - 122
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Global optimization of low-thrust space missions using evolutionary neurocontrol
T2  - Proceedings of the international workshop on global optimization
N2  - Low-thrust space propulsion systems enable flexible high-energy deep space missions, but the design and optimization of the interplanetary transfer trajectory is usually difficult. It involves much experience and expert knowledge because the convergence behavior of traditional local trajectory optimization methods depends strongly on an adequate initial guess. Within this extended abstract, evolutionary neurocontrol, a method that fuses artificial neural networks and evolutionary algorithms, is proposed as a smart global method for low-thrust trajectory optimization. It does not require an initial guess. The implementation of evolutionary neurocontrol is detailed and its performance is shown for an exemplary mission.
KW  - Evolutionary Neurocontrol
KW  - Spacecraft Trajectory Optimization
KW  - Low-Thrust Propulsion
Y1  - 2005
SP  - 85
EP  - 90
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Baturkin, Volodymyr
A1  - Coverstone, Victoria
A1  - Diedrich, Ben
A1  - Garbe, Gregory
A1  - Görlich, Marianne
A1  - Leipold, Manfred
A1  - Lura, Franz
A1  - Macdonald, Malcolm
A1  - McInnes, Colin
A1  - Mengali, Giovanni
A1  - Quarta, Alessandro
A1  - Rios-Reyes, Leonel
A1  - Scheeres, Daniel J.
A1  - Seboldt, Wolfgang
A1  - Wie, Bong
T1  - Potential effects of optical solar sail degredation on trajectory design
T2  - AAS/AIAA Astrodynamics Specialist
N2  - The optical properties of the thin metalized polymer films that are projected for solar sails are assumed to be affected by the erosive effects of the space environment. Their degradation behavior in the real space environment, however, is to a considerable degree indefinite, because initial ground test results are controversial and relevant inspace tests have not been made so far. The standard optical solar sail models that are currently used for trajectory design do not take optical degradation into account, hence its potential effects on trajectory design have not been investigated so far. Nevertheless, optical degradation is important for high-fidelity solar sail mission design, because it decreases both the magnitude of the solar radiation pressure force acting on the sail and also the sail control authority. Therefore, we propose a simple parametric optical solar sail degradation model that describes the variation of the sail film’s optical coefficients with time, depending on the sail film’s environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails. Using our model, the effects of different optical degradation behaviors on trajectory design are investigated for various exemplary missions.
Y1  - 2005
N1  - 2005 AAS/AIAA Astrodynamics Specialist Conference, 7-11.08.2005. Lake Tahoe, California
https://www.space-flight.org/AAS_meetings/2005_astro/2005_astro.html
SP  - 1
EP  - 23
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
T1  - Conceptual design tools for civil engineering
N2  - Applications of Graph Transformations with Industrial Relevance Lecture Notes in Computer Science, 2004, Volume 3062/2004, 434-439, DOI: http://dx.doi.org/10.1007/978-3-540-25959-6_33 This paper gives a brief overview of the tools we have developed to support conceptual design in civil engineering. Based on the UPGRADE framework, two applications, one for the knowledge engineer and another for architects allow to store domain specific knowledge and to use this knowledge during conceptual design. Consistency analyses check the design against the defined knowledge and inform the architect if rules are violated.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, N.
T1  - Interactive distributed knowledge support for conceptual building design
N2  - In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
SN  - 3-86068-213-X
ER  - 
TY  - CHAP
A1  - Kirchhof, M.
A1  - Kraft, Bodo
T1  - UML-based modeling of architectural knowledge and design
N2  - IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect’s sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.
KW  - UML
KW  - UML
KW  - Unified Modeling Language
KW  - UML
KW  - Unified Modeling Language
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Demirci, Taylan
A1  - Trzewik, Jürgen
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Fibroblast response to mechanical stress: role of the adhesion substrate : [abstract]
N2  - Mechanical stimulation of the cells resulted in evident changes in the cell morphology, protein composition and gene expression. Microscopically, additional formation of stress fibers accompanied by cell re-arrangements in a monolayer was observed. Also, significant activation of p53 gene was revealed as compared to control. Interestingly, the use of CellTech membrane coating induced cell death after mechanical stress had been applied. Such an effect was not detected when fibronectin had been used as an adhesion substrate.
KW  - Fibroblast
KW  - Mechanische Beanspruchung
KW  - celldrum technology
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilger, Klaus
A1  - Böhm, Stefan
A1  - Mundt, F.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete
T2  - Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Università degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction
Y1  - 2004
SP  - 150
EP  - 159
PB  - Liguori
CY  - Napoli
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Sedlacek, Gerhard
T1  - Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems
T2  - 10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings
Y1  - 2004
SP  - 35
EP  - 44
PB  - Danish Steel Inst.
CY  - Copenhagen
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
A1  - Bott, Rainer
A1  - Sorger, Ulrich
ED  - Fazel, Khaled
T1  - Equalization for multi-carrier systems in time-varying channels
T2  - Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003
Y1  - 2004
SN  - 1402018371
SP  - 251
EP  - 258
ER  - 
TY  - CHAP
A1  - Land, Ingmar
A1  - A., Peter
A1  - Gligorevic, Snjezana
T1  - Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts
T2  - 5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)
Y1  - 2004
SN  - 3-8007-2802-8
SP  - 195
EP  - 202
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Audio-visual hybrids : between immersion and detachment
N2  - Close interrelations between sound and image are not a mere phenomenon of today’s multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...].
KW  - Elektronische Kunst
KW  - Klangkunst
KW  - Hybride Kunst
KW  - Medienkunst
KW  - Hybrid Art
KW  - Sound Art
KW  - Audio-visual Art
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Surtees, A. J.
A1  - Gillespie, A.
A1  - Kern, Alexander
A1  - Rousseau, A.
T1  - DEVELOPMENT OF A RISK ASSESSMENT CALCULATOR BASED ON A SIMPLIFIED FORM OF THE IEC 62305-2 STANDARD ON LIGHTNING PROTECTION
N2  - Neue Blitzschutznorm IEC 62305. Entwicklung einer einfachen Software zur Risikoabwägung
N2  - IEC Technical Committee 81 is currently creating the new IEC 62305 series of standards on Lightning Protection. Working Group 9 is responsible for Part 2 of this series, which deals with the assessment and management of risk its CDV (Committee Draft for Voting) stage and has been circulated to National Committees for comment. The paper details the development of the Simplified IEC Risk Assessment Calculator software tool as described in Informative Annex J of IEC62305-2 Ed.1/CDV 2. This tool is intended as a simplified implementation of the more rigorous treatment of risk management found in the written document. It is designed to be relatively intuitive for users who wish to obtain an initial assessment of risk sensitivity, but should not be considered a substitute to a full understanding of the methods provided in the standard when dealing with more complicated structures or those where greater risks to personal or system operation are involved.
KW  - Risiko
KW  - Risikoabwägung
KW  - Blitzrisiko
KW  - Blitzschutz
KW  - Risk
KW  - Risk Management
KW  - Risk Assessment
KW  - Lightning Risk
KW  - Lightning Protection
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Heidler, Fridolin
A1  - Seevers, M.
A1  - Zischank, Wolfgang J.
T1  - Magnetic Fields and Induced Voltages in case of a Direct Strike - Comparison of Results obtained from Measurements at a Scaled Building to those of IEC 62305-4
N2  - In the paper the results obtained from experiments at a modelled reinforced building in case of a direct lightning strike are compared with calculations. The comparison includes peak values of the magnetic field Hmax, its derivative (dH/dt)max and of induced voltages umax in typical cable routings. The experiments are performed at a 1:6 scaled building and the results are extrapolated using the similarity relations theory. The calculations are based on the approximate formulae given in IEC 62305-4 and have to be supplemented by a rough estimation of the additional shielding effect of a second reinforcement layer. The comparison shows, that the measured peak values of the magnetic field and its derivative are mostly lower than the calculated. The induced voltages are in good agreement. Hence, calculations of the induced voltages based on IEC 62305-4 are a good method for lightning protection studies of buildings, where the reinforcement is used as a grid-like electromagnetic shield.
N2  - Auswirkungen eines direkten Blitzeinschlages auf ein Gebäude, Vergleich von experimentellen Ergebnissen und Berechnungen basierend auf einer Formel aus der IEC 62305-4
KW  - Blitz
KW  - Direkter Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Magnetische Felder
KW  - Induzierte Spannungen
KW  - Kalkulation
KW  - Direct lightning strike
KW  - electromagnetic shield
KW  - magnetic fields
KW  - induced voltages
KW  - calculations
Y1  - 2004
SN  - 0304-3886
N1  - Journal of electrostatics: Beitr. auf S. 379 - 385. doi:10.1016/j.elstat.2006.09.004
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Heidler, Fridolin
A1  - Wiesinger, J.
A1  - Stimper, K.
A1  - Kern, Alexander
A1  - Seevers, M.
T1  - Magnetic Fields and Induced Voltages inside LPZ 1 Measured at a 1:6 Scale Model Building
N2  - Laborexperimente zu Blitzschutzzonen in Stahlbetongebäuden anhand eines Modells im Maßstab 1:6
N2  - For the application of the concept of Lightning Protection Zones (LPZ), the knowledge of the magnetic fields and induced voltages inside a structure is necessary. Laboratory experiments have been conducted at a downscaled model of a building (scale factor 1:6) to determine these electromagnetic quantities in case of a direct strike to the structure. The model (3 m x 2 m x 2 m) represented a small industrial building using the reinforcement of the concrete as electromagnetic shield. The magnetic fields and magnetic field derivatives were measured at several location inside the scaled model. Further, the voltages induced on three typical cable routes inside the model was determined. The influence of the lightning current waveshape, point-of-strike, bonding of the cable routes, and bridging of an expansion joint in the middle of the building on these quantities was studied.
KW  - Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Stahlbeton
KW  - Maßstabsgetreues Modell
KW  - Lightning
KW  - electromagnetic shielding
KW  - reinforced concrete
KW  - scaled model
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Graeter, F.
A1  - Nava, P.
ED  - Ramos, C.
T1  - Performance of the SKAL-ET Collector Loop at KJC Operating Company
T2  - 12th International Symposium Solar Power and Chemical Energy Systems, October 6-8, 2004, Oaxaca Mexico ; SolarPACES International Symposium, 12
Y1  - 2004
SN  - 968-6114-18-1
PB  - Instituto de Investigaciones Electricas
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Lüpfert, E.
A1  - Herrmann, Ulf
A1  - Price, Henry
A1  - Zarza, E.
A1  - Kistener, R.
ED  - Ramos, C.
T1  - Towards Standard Performance Analysis for Parabolic Trough Collector Fields
T2  - 12th International Symposium Solar Power and Chemical Energy Systems, October 6-8, 2004, Oaxaca Mexico ; SolarPACES International Symposium, 12
Y1  - 2004
SN  - 968-6114-18-1
PB  - Instituto de Investigaciones Electricas
CY  - [s.l.]
ER  -