TY  - CHAP
A1  - Mertens, Josef
T1  - Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme
N2  - RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.
KW  - Laminare Strömung
KW  - Ansaugsystem
KW  - Profilumströmung
KW  - Laminarprofil
KW  - RaWid
KW  - hybrid laminar flow
KW  - suction systems
KW  - suction structure
KW  - contamination
KW  - operational aspects
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Elsing, R.
ED  - DeLuca, Luigi T.
T1  - Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine
T2  - Progress in Propulsion Physics. - Vol. 4
Y1  - 2013
SN  - 978-2-7598-0876-2
U6  - https://doi.org/10.1051/eucass/201304357
N1  - 4th European Conference for Aero-Space Sciences : July 4 - 8, 2011, St Petersburg, Russia ; EUCASS <4, 2011, St. Petersburg>
SP  - 357
EP  - 372
PB  - EDP Sciences
CY  - [Les Ulis]
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes
T2  - Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)
Y1  - 1983
SP  - 339
EP  - 353
PB  - Begell House
CY  - Redding, Connecticut
ER  - 
TY  - CHAP
A1  - Havermann, Marc
A1  - Seiler, F.
A1  - Henning, P.
ED  - Dillmann, Andreas
ED  - Heller, Gerd
ED  - Klaas, Michael
ED  - Kreplin, Hans-Peter
ED  - Nitsche, Wolfgang
ED  - Schröder, Wolfgang
T1  - Shock Tunnel Experiments and CFD Simulation of Lateral Jet Interaction in Hypersonic Flows
T2  - New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008
Y1  - 2010
SN  - 9783642142437
U6  - https://doi.org/10.1007/978-3-642-14243-7_45
N1  - Notes on numerical fluid mechanics and multidisciplinary design 112
SP  - 365
EP  - 372
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - LES of Jets In Cross-Flow and Application to the “Micromix” Hydrogen Combustion
T2  - XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada
Y1  - 2009
SN  - 9781615676064
SP  - 1555
EP  - 1561
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - Bartelt, Perry
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2007
N1  - A-08119
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2008
N1  - A-01048
ER  - 
TY  - CHAP
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Fluid Transport in Porous Media probed by Relaxation-Exchange NMR
T2  - 2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.
Y1  - 2011
N1  - H12B-07; American Geophysical Union
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
T1  - Numerical Debris Flow Simulation
T2  - Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McArdell, B. W.
A1  - Bartelt, Perry
T1  - A comparison of two approaches to modeling multiphase gravity currents
T2  - Geophysical Research Abstracts
Y1  - 2006
N1  - A-08738
VL  - 8
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx Hydrogen combustion chamber for industrial gas turbine applications“, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
T2  - ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012
Y1  - 2012
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; (14 ; 2012.02.27-03.02 ; Honolulu, Hawaii)
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Mertens, Josef
T1  - Next steps envisaged to improve wing performance of commercial aircraft
T2  - Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19–21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)
Y1  - 2001
SN  - 3-540-41911-X (Print)
SN  - 978-3-540-45359-8 (Elektronisch)
U6  - https://doi.org/10.1007/978-3-540-45359-8_26
SP  - 246
EP  - 255
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Spohr, A.
A1  - Schirra, Julian
A1  - Hoefling, J.
A1  - Schedl, A.
T1  - Wing weight estimation methodology for highly non-planar lifting systems during conceptual design
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - Publ. online
ER  - 
TY  - CHAP
A1  - Hoefling, J.
A1  - Schirra, Julian
A1  - Spohr, A.
A1  - Schäfer, D.
T1  - Induced drag computation with wake model schemes for highly non-planar wing systems
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - 1
EP  - 10
PB  - Dt. Ges. für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, Sebastian
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Tekin, N.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
ED  - Song, Seung Jin
T1  - Experimental and numerical characterization of the dry low NOx micromix hydrogen combustion principle at increased energy density for industrial hydrogen gas turbine applications
T2  - Combustion, fuels and emissions : proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013 ; June 3 - 7, 2013, San Antonio, Texas, USA ; vol. 1
Y1  - 2013
SN  - 978-0-7918-5510-2
N1  - Paper No: GT2013-94771
SP  - V001T04A055
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - J., Watmuff
T1  - Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design
T2  - 62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft
Y1  - 2013
SP  - 1
EP  - 8
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - https://doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - https://doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Schmidt, J.
A1  - Rosenkranz, Josef
T1  - Principles of machine noise reduction
T2  - Inter-noise 85 : proceedings ; 1985 international conference on noise control engineering ; Munich, Sept. 18 - 20, 1985. - (Schriftenreihe der Bundesanstalt für Arbeitsschutz : Tagungsbericht ; 39)
Y1  - 1985
SN  - 3-88314-417-7
SP  - 23
EP  - 36
PB  - Bundesanstalt für Arbeitsschutz [u.a.]
CY  - Dortmund [u.a.]
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Keinz, Jan
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle
T2  - Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : Düsseldorf, Germany, June 16–20, 2014 ; Vol. 4A)
Y1  - 2014
SN  - 978-0-7918-4568-4
N1  - Paper No. GT2014-25848
SP  - V04AT04A057
PB  - ASME
CY  - New York, N.Y.
ER  - 
TY  - CHAP
A1  - Mertens, Josef
ED  - Nitsche, Wolfgang
T1  - Some important results of the technology programme RaWid
T2  - New Results in Numerical and Experimental Fluid Mechanics : Contributions to the 11th AG STAB/DGLR Symposium Berlin, Germany 1998. - Vol. 2. - (Notes on Numerical Fluid Mechanics ; 72)
Y1  - 1999
SN  - 978-3-663-10903-7 (Print)
SN  - 978-3-663-10901-3 (Elektronisch)
U6  - https://doi.org/10.1007/978-3-663-10901-3_41
SP  - 315
EP  - 322
PB  - Springer Fachmedien
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Plescher, Engelbert
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
T1  - Technical aspects of liquid diffusion model experiments
T2  - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1  - 2005
SP  - 5019
EP  - 5025
PB  - International Astronautical Federation
CY  - Paris
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
T1  - Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor with Variable Hydrogen Methane Mixtures
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-013
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Horikawa, Atsushi
T1  - 30 years of dry low NOx micromix combustor research for hydrogen-rich fuels: an overview of past and present activities
T2  - Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 4B: Combustion, Fuels, and Emissions
N2  - The paper presents an overview of the past and present of low-emission combustor research with hydrogen-rich fuels at Aachen University of Applied Sciences. In 1990, AcUAS started developing the Dry-Low-NOx Micromix combustion technology. Micromix reduces NOx emissions using jet-in-crossflow mixing of multiple miniaturized fuel jets and combustor air with an inherent safety against flashback. At first, pure hydrogen as fuel was investigated with lab-scale applications. Later, Micromix prototypes were developed for the use in an industrial gas turbine Honeywell/Garrett GTCP-36-300, proving low NOx characteristics during real gas turbine operation, accompanied by the successful definition of safety laws and control system modifications. Further, the Micromix was optimized for the use in annular and can combustors as well as for fuel-flexibility with hydrogen-methane-mixtures and hydrogen-rich syngas qualities by means of extensive experimental and numerical simulations. In 2020, the latest Micromix application will be demonstrated in a commercial 2 MW-class gas turbine can-combustor with full-scale engine operation. The paper discusses the advances in Micromix research over the last three decades.
KW  - Micromix
KW  - Hydrogen
KW  - Fuel-flexibility
KW  - NOx
KW  - Emissions
Y1  - 2021
SN  - 978-0-7918-8413-3
U6  - https://doi.org/10.1115/GT2020-16328
N1  - ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition
September 21–25, 2020, Virtual, Online
N1  - Paper No. GT2020-16328, V04BT04A069
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Loeb, Horst Wolfgang
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - SEP-Sample return from a main belt asteroid
T2  - 30th International Electric Propulsion Conference
N2  - By DLR-contact, sample return missions to the large main-belt asteroid “19, Fortuna” have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been
investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer
durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.
Y1  - 2007
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Spurmann, J.
A1  - Loeb, H. W.
A1  - Schartner, Karl-Heinz
A1  - Seboldt, Wolfgang
T1  - Mission design for a SEP mission to saturn
T2  - 60th International Astronautical Congress 2009 (IAC 2009)
N2  - Within ESA's Cosmic Vision 2015-2025 plan, a mission to explore the Saturnian System, with special emphasis on its two moons Titan and Enceladus, was selected for study, termed TANDEM (Titan and Enceladus Mission). In this paper, we describe an optimized mission design for a TANDEM-derived solar electric propulsion (SEP) mission. We have chosen the SEP mission scenario for the interplanetary transfer of the TANDEM spacecraft because all feasible gravity assist sequences for a chemical transfer between 2015 and 2025 result in long flight times of about nine years. Our SEP system is based on the German RIT ion engine. For our optimized mission design, we have extensively explored the SEP parameter space (specific impulse, thrust level, power level) and have calculated an optimal interplanetary trajectory for each setting. In contrast to the original TANDEM mission concept, which intends to use two launch vehicles and an all-chemical transfer, our SEP mission design requires only a single Ariane 5 ECA launch for the same payload mass. Without gravity assist, it yields a faster and more flexible transfer with a fight time of less than seven years, and an increased payload ratio. Our mission design proves thereby the capability of SEP even for missions into the outer solar system.
Y1  - 2009
SN  - 978-1-61567-908-9
N1  - 12-16 October 2009, Daejeon, Republic of Korea.
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - A comparison of complex chemistry mechanisms for hydrogen methane blends based on the Sandia / Sydney Bluff-Body Flame HM1
T2  - Proceedings of the Eleventh Asia‐Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017
Y1  - 2017
SN  - 978-1-5108-5646-2
SP  - 262
EP  - 265
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Design concept and modeling of an advanced solar photon thruster
T2  - Advances in the Astronautical Sciences
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.
KW  - solar sails
Y1  - 2009
SN  - 978-087703554-1
SN  - 00653438
N1  - 19th AAS/AIAA Space Flight Mechanics Meeting; Savannah, GA; United States; 8 February 2009 through 12 February 2009
SP  - 723
EP  - 740
PB  - American Astronautical Society
CY  - San Diego, Calif.
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Biele, Jens
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Lange, Caroline
A1  - Ulamec, Stephan
A1  - Ziach, Christian
A1  - Spröwitz, Tom
A1  - Ruffer, Michael
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Toth, Norbert
A1  - Mimasu, Yuya
A1  - Rittweger, Andreas
A1  - Bibring, Jean-Pierre
A1  - Braukhane, Andy
A1  - Boden, Ralf Christian
A1  - Dumont, Etienne
A1  - Jahnke, Stephan Siegfried
A1  - Jetzschmann, Michael
A1  - Krüger, Hans
A1  - Lange, Michael
A1  - Gomez, Antonio Martelo
A1  - Massonett, Didier
A1  - Okada, Tatsuaki
A1  - Sagliano, Marco
A1  - Sasaki, Kaname
A1  - Schröder, Silvio
A1  - Sippel, Martin
A1  - Skoczylas, Thomas
A1  - Wejmo, Elisabet
T1  - Small landers and separable sub-spacecraft for near-term solar sails
T2  - The Fourth International Symposium on Solar Sailing 2017
N2  - Following the successful PHILAE landing with ESA's ROSETTA probe and the launch of the MINERVA rovers and the Mobile Asteroid Surface Scout, MASCOT, aboard the JAXA space probe, HAYABUSA2, to asteroid (162173) Ryugu, small landers have found increasing interest. Integrated at the instrument level in their mothership they support small solar system body studies. With efficient capabilities, resource-friendly design and inherent robustness they are an attractive exploration mission element. We discuss advantages and constraints of small sub-spacecraft, focusing on emerging areas of activity such as asteroid diversity studies, planetary defence, and asteroid mining, on the background of our projects PHILAE, MASCOT, MASCOT2, the JAXA-DLR Solar Power Sail Lander Design Study, and others. The GOSSAMER-1 solar sail deployment concept also involves independent separable sub-spacecraft operating synchronized to deploy the sail. Small spacecraft require big changes in the way we do things and occasionally a little more effort than would be anticipated based on a traditional large spacecraft approach. In a Constraints-Driven Engineering environment we apply Concurrent Design and Engineering (CD/CE), Concurrent Assembly, Integration and Verification (CAIV) and Model-Based Systems Engineering (MBSE). Near-term solar sails will likely be small spacecraft which we expect to harmonize well with nano-scale separable instrument payload packages.
KW  - Small Solar System Body Lander
KW  - Small Spacecraft
KW  - PHILAE
KW  - MASCOT
KW  - Solar Power Sail
Y1  - 2017
N1  - The Fourth International Symposium on Solar Sailing 2017, 17-20 January 2017. Kyoto Research Park, Kyoto, Japan
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Chand, Suditi
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Heiligers, Jeannette
A1  - Herčík, David
A1  - Hérique, Alain
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Kofman, Wlodek
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - McInnes, Colin
A1  - Meß, Jan-Gerd
A1  - Mikschl, Tobias
A1  - Mikulz, Eugen
A1  - Montenegro, Sergio
A1  - Moore, Iain
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Plettemeier, Dirk
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Rogez, Yves
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Vergaaij, Merel
A1  - Viavattene, Giulia
A1  - Wejmo, Elisabet
A1  - Wiedemann, Carsten
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Flights are ten a sail – Re-use and commonality in the design and system engineering of small spacecraft solar sail missions with modular hardware for responsive and adaptive exploration
T2  - 70th International Astronautical Congress (IAC)
KW  - system engineering
KW  - small solar system body characterisation
KW  - small spacecraft solar sail
KW  - small spacecraft asteroid lander
KW  - responsive space
Y1  - 2019
SN  - 9781713814856
N1  - 70th International Astronautical Congress (IAC), Washington D.C., United States, 21-25 October 2019
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Thoma, Andreas
A1  - Fisher, Alex
A1  - Bertrand, Olivier
A1  - Braun, Carsten
ED  - Vouloutsi, Vasiliki
ED  - Mura, Anna
ED  - Tauber, Falk
ED  - Speck, Thomas
ED  - Prescott, Tony J.
ED  - Verschure, Paul F. M. J.
T1  - Evaluation of possible flight strategies for close object evasion from bumblebee experiments
T2  - Living Machines 2020: Biomimetic and Biohybrid Systems
KW  - Obstacle avoidance
KW  - Bumblebees
KW  - Flight control
KW  - UAV
KW  - MAV
Y1  - 2020
SN  - 978-3-030-64312-6
U6  - https://doi.org/10.1007/978-3-030-64313-3_34
N1  - 9th International Conference, Living Machines 2020, Freiburg, Germany, July 28–30, 2020, Proceedings
SP  - 354
EP  - 365
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Boden, Ralf Christian
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Hercik, D.
A1  - Herique, A.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Kofman, Wlodek
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - McInnes, Colin R.
A1  - Mikschl, Tobias
A1  - Mikulz, Eugen
A1  - Montenegro, Sergio
A1  - Moore, Iain
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Plettemeier, Dirk
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Rogez, Yves
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Toth, Norbert
A1  - Viavattene, Giulia
A1  - Wejmo, Elisabet
A1  - Wolff, Friederike
A1  - Ziach, Christian
T1  - Responsive integrated small spacecraft solar sail and payload design concepts and missions
T2  - Conference: 5th International Symposium on Solar Sailing (ISSS 2019)
N2  - Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from Earth’s deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. This work focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods will then be compared in terms of maximum economic return, sets of attainable target asteroids, and mission flexibility. This paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.
Y1  - 2019
N1  - Conference: 5th International Symposium on Solar Sailing (ISSS 2019)At: Aachen, Germany
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Meß, Jan-Gerd
A1  - Biele, Jens
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Spietz, Peter
A1  - Grimm, Christian D.
A1  - Spröwitz, Tom
A1  - Lange, Caroline
A1  - Ulamec, Stephan
T1  - Small spacecraft in small solar system body applications
T2  - IEEE Aerospace Conference 2017, Big Sky, Montana, USA
Y1  - 2017
SN  - 978-1-5090-1613-6
U6  - https://doi.org/10.1109/AERO.2017.7943626
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Borella, Laura
A1  - Ceriotti, Matteo
A1  - Chand, Suditi
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Fexer, Sebastian
A1  - Grimm, Christian D.
A1  - Hendrikse, Jeffrey
A1  - Herčík, David
A1  - Herique, Alain
A1  - Hillebrandt, Martin
A1  - Ho, Tra-Mi
A1  - Kesseler, Lars
A1  - Laabs, Martin
A1  - Lange, Caroline
A1  - Lange, Michael
A1  - Lichtenheldt, Roy
A1  - McInnes, Colin R.
A1  - Moore, Iain
A1  - Peloni, Alessandro
A1  - Plettenmeier, Dirk
A1  - Quantius, Dominik
A1  - Seefeldt, Patric
A1  - Venditti, Flaviane c. F.
A1  - Vergaaij, Merel
A1  - Viavattene, Giulia
A1  - Virkki, Anne K.
A1  - Zander, Martin
T1  - More bucks for the bang: new space solutions, impact tourism and one unique science & engineering opportunity at T-6 months and counting
T2  - 7th IAA Planetary Defense Conference
N2  - For now, the Planetary Defense Conference Exercise 2021's incoming fictitious(!), asteroid, 2021 PDC, seems headed for impact on October 20th, 2021, exactly 6 months after its discovery. Today (April 26th, 2021), the impact probability is 5%, in a steep rise from 1 in 2500 upon discovery six days ago. We all know how these things end. Or do we? Unless somebody kicked off another headline-grabbing media scare or wants to keep civil defense very idle very soon, chances are that it will hit (note: this is an exercise!). Taking stock, it is barely 6 months to impact, a steadily rising likelihood that it will actually happen, and a huge uncertainty of possible impact energies: First estimates range from 1.2 MtTNT to 13 GtTNT, and this is not even the worst-worst case: a 700 m diameter massive NiFe asteroid (covered by a thin veneer of Ryugu-black rubble to match size and brightness), would come in at 70 GtTNT. In down to Earth terms, this could be all between smashing fireworks over some remote area of the globe and a 7.5 km crater downtown somewhere. Considering the deliberate and sedate ways of development of interplanetary missions it seems we can only stand and stare until we know well enough where to tell people to pack up all that can be moved at all and save themselves. But then, it could just as well be a smaller bright rock. The best estimate is 120 m diameter from optical observation alone, by 13% standard albedo. NASA's upcoming DART mission to binary asteroid (65803) Didymos is designed to hit such a small target, its moonlet Dimorphos. The Deep Impact mission's impactor in 2005 successfully guided itself to the brightest spot on comet 9P/Tempel 1, a relatively small feature on the 6 km nucleus. And 'space' has changed: By the end of this decade, one satellite communication network plans to have launched over 11000 satellites at a pace of 60 per launch every other week. This level of series production is comparable in numbers to the most prolific commercial airliners. Launch vehicle production has not simply increased correspondingly – they can be reused, although in a trade for performance. Optical and radio astronomy as well as planetary radar have made great strides in the past decade, and so has the design and production capability for everyday 'high-tech' products. 60 years ago, spaceflight was invented from scratch within two years, and there are recent examples of fast-paced space projects as well as a drive towards 'responsive space'. It seems it is not quite yet time to abandon all hope. We present what could be done and what is too close to call once thinking is shoved out of the box by a clear and present danger, to show where a little more preparedness or routine would come in handy – or become decisive. And if we fail, let's stand and stare safely and well instrumented anywhere on Earth together in the greatest adventure of science.
Y1  - 2021
N1  - 7th IAA Planetary Defense Conference, Vienna, Austria, 26-30 April 2021
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Wlademar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron D.
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Meß, Jan-Gerd
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Toth, Norbert
A1  - Ceriotti, Matteo
A1  - McInnes, Colin
A1  - Peloni, Alessandro
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Dachwald, Bernd
A1  - Hercik, David
A1  - Lichtenheldt, Roy
A1  - Wolff, Friederike
A1  - Koncz, Alexander
A1  - Pelivan, Ivanka
A1  - Schmitz, Nicole
A1  - Boden, Ralf
A1  - Riemann, Johannes
A1  - Seboldt, Wolfgang
A1  - Wejmo, Elisabet
A1  - Ziach, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Ruffer, Michael
A1  - Cordero, Federico
A1  - Tardivel, Simon
T1  - Solar sails for planetary defense & high-energy missions
T2  - IEEE Aerospace Conference Proceedings
N2  - 20 years after the successful ground deployment test of a (20 m) 2 solar sail at DLR Cologne, and in the light of the upcoming U.S. NEAscout mission, we provide an overview of the progress made since in our mission and hardware design studies as well as the hardware built in the course of our solar sail technology development. We outline the most likely and most efficient routes to develop solar sails for useful missions in science and applications, based on our developed `now-term' and near-term hardware as well as the many practical and managerial lessons learned from the DLR-ESTEC Gossamer Roadmap. Mission types directly applicable to planetary defense include single and Multiple NEA Rendezvous ((M)NR) for precursor, monitoring and follow-up scenarios as well as sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation. Other mission types such as the Displaced L1 (DL1) space weather advance warning and monitoring or Solar Polar Orbiter (SPO) types demonstrate the capability of near-term solar sails to achieve asteroid rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. Some of these mission types such as SPO, (M)NR and RKI include separable payloads. For one-way access to the asteroid surface, nanolanders like MASCOT are an ideal match for solar sails in micro-spacecraft format, i.e. in launch configurations compatible with ESPA and ASAP secondary payload platforms. Larger landers similar to the JAXA-DLR study of a Jupiter Trojan asteroid lander for the OKEANOS mission can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. The high impact velocities and re-try capability achieved by the RKI mission type on a final orbit identical to the target asteroid's but retrograde to its motion enables small spacecraft size impactors to carry sufficient kinetic energy for deflection.
Y1  - 2019
U6  - https://doi.org/10.1109/AERO.2019.8741900
N1  - AERO 2019; Big Sky; United States; 2 March 2019 through 9 March 2019
SP  - 1
EP  - 21
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Lange, Caroline
A1  - Dachwald, Bernd
A1  - Grimm, Christian
A1  - Koch, Aaron
A1  - Ulamec, Stephan
T1  - Small Spacecraft in Planetary Defence Related Applications–Capabilities, Constraints, Challenges
T2  - IEEE Aerospace Conference
N2  - In this paper we present an overview of the characteristics and peculiarities of small spacecraft missions related to planetary defence applications. We provide a brief overview of small spacecraft missions to small solar system bodies. On this background we present recent missions and selected projects and related studies at the German Aerospace Center, DLR, that contribute to planetary defence related activities. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander recently arrived on comet 67P/Churyumov-Gerasimenko aboard ESA’s ROSETTA comet rendezvous mission, and the Mobile Asteroid Surface Scout, MASCOT, now underway to near-Earth asteroid (162173) 1999 JU3 aboard the Japanese sample-return probe HAYABUSA-2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely
compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact & Deflection Assessment), a joint effort of ESA,JHU/APL, NASA, OCA and DLR, combining JHU/APL’s DART (Double Asteroid Redirection Test) and ESA’s AIM (Asteroid Impact Monitor) spacecraft in a mission towards
near-Eath binary asteroid (65803) Didymos.
KW  - small spacecraft
KW  - planetary defence
KW  - asteroid lander
KW  - solar sail
KW  - flotilla missions
Y1  - 2015
N1  - 2015 IEEE Aerospace Conference, 7.-13. Mar. 2015, Big Sky, Montana, USA.
SP  - 1
EP  - 18
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mengali, Giovanni
A1  - Quarta, Alessandro A
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R
T1  - Optical solar sail degradation modelling
T2  - 1st International Symposium on Solar Sailing
N2  - We propose a simple parametric OSSD model that describes the variation of the sail film's optical coefficients with time, depending on the sail film's environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails.
Y1  - 2007
N1  - 1st International Symposium on Solar Sailing 27–29 June 2007, Herrsching, Germany
SP  - 1
EP  - 27
ER  - 
TY  - CHAP
A1  - Schildt, Philipp
A1  - Marzocca, Pier
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Keimer, Jona
T1  - Effects of atmospheric excitation on vibration based condition monitoring methods for hybrid-electric aircraft propulsion systems
T2  - AIAC 2018: 18th Australian International Aerospace Congress: HUMS - 11th Defence Science and Technology (DST) International Conference on Health and Usage Monitoring (HUMS 2019): ISSFD - 27th International Symposium on Space Flight Dynamics (ISSFD)
Y1  - 2019
SN  - 9781925627213
SP  - 923
EP  - 928
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - https://doi.org/10.25967/490012
SP  - 1
EP  - 17
ER  -