TY  - CHAP
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11440
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
A1  - Kubalski, Thomas
T1  - Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11477
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative System for Earthquake Resistant Masonry Infill Walls
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11479
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Cacciatore, Pamela
A1  - Boesen, Niklas
T1  - Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna  earthquake  series
T1  - Untersuchungen des seismischen Verhaltens von  modernen Mauerwerksbauten während der  Erdbebenserie in der Emilia Romagna
JF  - Mauerwerk
N2  - The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.
Y1  - 2018
U6  - http://dx.doi.org/10.1002/dama.201800013
SN  - 1437-1022
VL  - 22
IS  - 4
SP  - 238
EP  - 250
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  -