TY  - CHAP
A1  - Wetter, Martin
A1  - Kern, Alexander
T1  - Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
Y1  - 2014
SP  - 1
EP  - 7
ER  - 
TY  - BOOK
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Jahresabschluss und Jahresabschlussanalyse : systematische Darstellung in Übersichten. (Reihe Betriebswirtschaftslehre in Übersichten ; 2)
Y1  - 2014
SN  - 978-3–95404–828–1
PB  - Cuvillier
CY  - Göttingen
ET  - 5. Aufl., Studienausg.
ER  - 
TY  - BOOK
A1  - Gebhardt, Andreas
T1  - 3D-Drucken : Grundlagen und Anwendungen des Additive Manufacturing (AM)
Y1  - 2014
SN  - 978-3-446-44238-2 ; 978-3-446-44237-5
PB  - Hanser
CY  - München
ER  - 
TY  - JOUR
A1  - Müller, Martin
A1  - Hirschfeld, Julian
A1  - Lambertz, Rita
A1  - Schulze Lohoff, Andreas
A1  - Lustfeld, Hans
A1  - Pfeifer, Heinz
A1  - Reißel, Martin
T1  - Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks
JF  - Journal of power sources
N2  - In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.
Y1  - 2014
U6  - https://doi.org/10.1016/j.jpowsour.2014.08.045
SN  - 1873-2755 (E-Journal); 0378-7753 (Print)
VL  - 272
SP  - 225
EP  - 232
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Stadler, Alexander Maximilian
A1  - Garvey, Christopher J.
A1  - Embs, Jan Peter
A1  - Koza, Michael Marek
A1  - Unruh, Tobias
A1  - Artmann, Gerhard
A1  - Zaccai, Guiseppe
T1  - Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study
JF  - Biochimica et biophysica acta (BBA): General Subjects
Y1  - 2014
U6  - https://doi.org/10.1016/j.bbagen.2014.06.007
SN  - 1872-8006 (E-Journal); 0304-4165 (Print)
VL  - 1840
IS  - 10
SP  - 2989
EP  - 2999
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Tietze, Jürgen
T1  - Einführung in die angewandte Wirtschaftsmathematik : das praxisnahe Lehrbuch - inklusive Brückenkurs für Einsteiger. - 17. erw. Aufl.
Y1  - 2014
SN  - 978-3-658-02361-4  ; 978-3-658-02360-7
PB  - Springer
CY  - Wiesbaden
ET  - 17., erw. Aufl.
ER  - 
TY  - JOUR
A1  - Malecha, Hartmut
A1  - Klubert, J.
A1  - Heinen-Fuchs, Sabine
T1  - Laserscanning passe? 3-D-Oberflächenmodelle aus Bilddaten und deren messtechnischer Nutzen
JF  - Wasserwirtschaft
Y1  - 2014
SN  - 0043-0978
N1  - Die Zeitschrift ist gedruckt in der Bibliothek Bayernallee vorhanden.
VL  - Jg. 104
IS  - Nr. 9
SP  - 32
EP  - 35
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Sappler, Magnus
T1  - TRANSPACT : die automatische Mittelpufferkupplung für attraktiven Güterverkehr
T2  - RAIL-FREIGHT 2014 : Zukunft des Schienengüterverkehrs ; Technologie - Ökonomie - Ökologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schienengüterverkehr] (Bahntechnik Aktuell ; 48)
Y1  - 2014
SN  - 978-3-940727-41-1
SP  - 121
EP  - 128
PB  - Verl. d. IFV Bahntechnik
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Ratke, Lorenz
A1  - Milow, Barbara
A1  - Lisinski, Susanne
A1  - Hoepfner, Sandra
T1  - On an effect of fine ceramic particles on the structure of aerogels
JF  - Microgravity science and technology
Y1  - 2014
U6  - https://doi.org/10.1007/s12217-014-9380-2
SN  - 0938-0108 ; 1875-0494
VL  - 26
SP  - 103
EP  - 110
PB  - Springer Nature
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Fischer, F.
A1  - Dilger, K.
A1  - Wittor, B.
A1  - Hildebrand, J.
A1  - Werner, F.
T1  - Applikation und Einsatz von faserverstärkten Klebstoffen im Bauwesen abgeschlossenes IGF-Projekt Nr. 16956 B (DVS 08.072, Laufzeit 01.02.2011 - 31.01.2013)
T2  - Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main
Y1  - 2014
SP  - 26
EP  - 27
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Braun, Christian
T1  - Risk management according to IEC 62305-2 edition 2: 2010–12 assessment of structures with a risk of explosion
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic “Structures with a risk of explosion” in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.
Y1  - 2014
SP  - 1237
EP  - 1242
ER  - 
TY  - BOOK
A1  - Mühl, Thomas
T1  - Einführung in die elektrische Messtechnik : Grundlagen, Messverfahren, Anwendungen. - 4. aktualisierte u. erw. Aufl.
Y1  - 2014
SN  - 978-3-8348-2063-1 ; 978-3-8348-0899-8
PB  - Springer
CY  - Wiesbaden
ET  - 4., aktualisierte u. erw. Aufl.
ER  - 
TY  - JOUR
A1  - Balzer, Hermann
T1  - Ausgestaltung und Steuerung des Netzes von Bankbeziehungen - Update nach 25 Jahren mithilfe einer explorativen Unternehmensbefragung / Arbeitskreis Finanzierung der Schmalenbach-Gesellschaft e.V. unter Mitarb. von Prof. Dr. Hermann Balzer...
JF  - Zfbf : Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung
Y1  - 2014
SN  - 0341-2687
IS  - H. 8
SP  - 694
EP  - 723
PB  - Springer Gabler
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Guo, Yuanyuan
A1  - Seki, Kosuke
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Device simulation of the light-addressable potentiometric sensor with a novel photoexcitation method for a higher spatial resolution
JF  - Procedia Engineering
N2  - A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) realized a higher spatial resolution of chemical imaging. In this method, a modulated light probe, which generates the alternating photocurrent signal, is surrounded by a ring of constant light, which suppresses the lateral diffusion of photocarriers by enhancing recombination. A device simulation verified that a higher spatial resolution could be obtained by adjusting the gap between the modulated and constant light. It was also found that a higher intensity and a longer wavelength of constant light was more effective. However, there exists a tradeoff between the spatial resolution and the amplitude of the photocurrent, and thus, the signal-to-noise ratio. A tilted incidence of constant light was applied, which could achieve even higher resolution with a smaller loss of photocurrent.
KW  - Light-addressable Potentiometric Sensor
KW  - novel photoexcitation method
KW  - tilted constant illumination
KW  - spatial resolution
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.369
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 456
EP  - 459
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Seki, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination
JF  - Procedia Engineering
N2  - The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.563
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 612
EP  - 615
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Yoshinobu, T.
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Semiconductor-based sensors for imaging of chemical processes
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - THES
A1  - Reyes Ochoa, Leonel
T1  - Engineering aspects of a parabolic trough collector field with direct steam generation and an organic rankine cycle
Y1  - 2014
N1  - Aachen, Fachhochsch., Masterarbeit, 2014
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Almajhdi, Fahad N.
A1  - Senger, Tilo
A1  - Amer, Haitham M.
A1  - Gissmann, Lutz
A1  - Öhlschläger, Peter
T1  - Design of a highly effective therapeutic HPV16 E6/E7-specific DNA vaccine: optimization by different ways of sequence rearrangements (Shuffling)
JF  - PLOS one
N2  - Persistent infection with the high-risk Human Papillomavirus type 16 (HPV 16) is the causative event for the development of cervical cancer and other malignant tumors of the anogenital tract and of the head and neck. Despite many attempts to develop therapeutic vaccines no candidate has entered late clinical trials. An interesting approach is a DNA based vaccine encompassing the nucleotide sequence of the E6 and E7 viral oncoproteins. Because both proteins are consistently expressed in HPV infected cells they represent excellent targets for immune therapy. Here we report the development of 8 DNA vaccine candidates consisting of differently rearranged HPV-16 E6 and E7 sequences within one molecule providing all naturally occurring epitopes but supposedly lacking transforming activity. The HPV sequences were fused to the J-domain and the SV40 enhancer in order to increase immune responses. We demonstrate that one out of the 8 vaccine candidates induces very strong cellular E6- and E7- specific cellular immune responses in mice and, as shown in regression experiments, efficiently controls growth of HPV 16 positive syngeneic tumors. This data demonstrates the potential of this vaccine candidate to control persistent HPV 16 infection that may lead to malignant disease. It also suggests that different sequence rearrangements influence the immunogenecity by an as yet unknown mechanism.
Y1  - 2014
U6  - https://doi.org/10.1371/journal.pone.0113461
SN  - 1932-6203
VL  - 11
IS  - 9
PB  - PLOS
CY  - San Francisco
ER  - 
TY  - BOOK
A1  - Kern, Alexander
A1  - Wettingfeld, Jürgen
T1  - Blitzschutzsysteme 1 : allgemeine Grundsätze, Risikomanagement, Schutz von baulichen Anlagen und Personen ; Erläuterungen zu den Normen DIN EN 62305-1 (VDE 0185-305-1):2011-10, DIN EN 62305-2 (VDE 0185-305-2):2013-02, DIN EN 62305-3 (VDE 0185-305-3):2011-10. (VDE-Schriftenreihe Normen verständlich ; 44)
Y1  - 2014
SN  - 978-3-8007-3511-2
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - BOOK
A1  - Tietze, Jürgen
T1  - Übungsbuch zur angewandten Wirtschaftsmathematik : Aufgaben, Testklausuren und ausführliche Lösungen. -  9., überarb. u. erw. Aufl.
Y1  - 2014
SN  - 978-3-658-06874-5 ; 978-3-658-06873-8
PB  - Vieweg + Teubner
CY  - Wiesbaden
ET  - 9., überarb. u. erw. Aufl.
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Der Embedded Wireless-Report
JF  - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme
Y1  - 2014
SN  - 0013-5658
SP  - 18
EP  - 25
PB  - WEKA-Fachmedien
CY  - Haar
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Feldbustechnologie
JF  - Factory : der Durchblick in der Technik
Y1  - 2014
SP  - Publ. online
PB  - WEKA-Industriemedien
CY  - Wien
ER  - 
TY  - JOUR
A1  - Demny, Andreas
A1  - Hebel, Christoph
T1  - Rechnergestützte Ermittlung der Verbindungsfunktionsstufen und der verbindungsbezogenen Angebotsqualität nach den Richtlinien für integrierte Netzgestaltung nach RIN 2008
JF  - Straßenverkehrstechnik : Organ der Forschungsgesellschaft für Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der Österreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift für Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik
Y1  - 2014
SN  - 0039-2219
VL  - Jg. 58
IS  - H. 12
SP  - 811
EP  - 820
PB  - Kirschbaum Verlag
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Hebel, Christoph
T1  - Mehrwert
T2  - Unser Dorf hat Zukunft
Y1  - 2014
SP  - 6
EP  - 7
PB  - StädteRegion Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - https://doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - CHAP
A1  - Benner, Joachim
T1  - Berechnungsmethoden der Wälzlagerreibung und Einflussgrößen
T2  - SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014
Y1  - 2014
SN  - 978-3-944331-81-2
SP  - 151
EP  - 170
PB  - TUDpress Verl. der Wissenschaften
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Thomas, Axel
T1  - Generation Y
JF  - P.T. : Magazin für Wirtschaft und Gesellschaft
Y1  - 2014
SN  - 1860-501X
VL  - 10
IS  - 3
SP  - 6
EP  - 9
PB  - OPS Netzwerk
CY  - Leipzig
ER  - 
TY  - JOUR
A1  - Thomas, Axel
A1  - Wassenberg, Gerd
T1  - Erfolgreich sein im Kampf um die besten Talente : Employer Branding
JF  - Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen
Y1  - 2014
N1  - Nur noch nach Anfrage bei der IHK Aachen erhältlich: https://www.ihk.de/aachen/servicemarken/presse/medien-der-ihk/wirtschaftliche-nachrichten/aktuelle-ausgaben
PB  - IHK Aachen
CY  - Aachen
ER  - 
TY  - RPRT
A1  - Hoepner, Gert
A1  - Siers, Carsten
T1  - 6. Studie Vertriebskompass / durchgeführt von der FH Aachen und der Siers & Collegen GmbH
Y1  - 2014
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Martin-Gonzalez, Anabel
A1  - Kotliar, Konstantin
A1  - Rios-Martinez, Jorge
A1  - Lanzl, Ines
A1  - Navab, Nassir
T1  - Mediated-reality magnification for macular degeneration rehabilitation
JF  - Journal of Modern Optics
Y1  - 2014
U6  - https://doi.org/10.1080/09500340.2014.936110
SN  - 1362-3044
VL  - 61
IS  - 17
SP  - 1400
EP  - 1408
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Borchert, Jörg
A1  - Bremen, Frank
T1  - Geschäfts- und Organisationsmodelle für ein Strom- und Gas-Portfoliomanagement
T2  - Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche
Y1  - 2014
SN  - 978-3-9813142-9-8
SP  - 11
EP  - 28
PB  - KS-Energy-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Burger, Ulrich
A1  - Kirsch, Ansgar
A1  - Marcher, Thomas
A1  - Höser, Sebastian
T1  - Geologisch-geotechnischer Planungsprozess von Tunnelbauten mit Schwerpunkt tiefliegender Tunnel
T2  - Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7
Y1  - 2014
SN  - 978-3-433-03051-6 ; 978-3-433-60335-2 ; 978-3-433-60508-0 ; 3-433-60508-4
SP  - 37
EP  - 62
PB  - Ernst
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Felber, W.
A1  - Marcher, Thomas
A1  - Fuchs, W.
T1  - Geotechnical challenges during design and construction of a ski resort in Azerbaijan
T2  - Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria
Y1  - 2014
SN  - 978‐3‐902593‐01‐6
SP  - 757
EP  - 762
PB  - ÖIAV - Österreichischer Ingenieur- und Architekten-Verein
CY  - Wien
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - https://doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration mitigation of wind turbine towers by a new semiactive Tuned Liquid Column Damper
T2  - 6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain
Y1  - 2014
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Meyer, Udo
A1  - Fehling, Ekkehard
T1  - EU-Projekt INSYSME: Innovative Techniken für erdbebensichere Ausfachungswände aus Ziegelmauerwerk in Stahlbetonrahmentragwerken
JF  - Mauerwerk : European journal of masonry
N2  - Am 1. Oktober 2013 ist das auf drei Jahre angelegte EU-Forschungsprojekt INSYSME – Innovative Systeme für erdbebentaugliche Ausfachungswände aus Ziegelmauerwerk in Stahlbetonrahmentragwerken – gestartet. Unter der Koordination der Universität Padua beteiligen sich 16 Partner aus sechs europäischen Ländern (Deutschland, Griechenland, Italien, Portugal, Rumänien, Türkei). Als deutsche Partner nehmen die Arbeitsgemeinschaft Mauerziegel aus Bonn, die Universität Kassel sowie das Ingenieurbüro SDA-engineering GmbH aus Herzogenrath, teil. Ziel der deutschen Partner ist die Entwicklung von innovativen Ausfachungssystemen aus monolithischem wärmedämmenden Ziegelmauerwerk, mit denen nicht nur eine erhöhte Erdbebensicherheit, sondern auch die sichere Erfüllung der steigenden Anforderungen aus Windbeanspruchungen gewährleistet werden können. Die Forschungsergebnisse sollen vom Partner SDA-engineering GmbH in die bereits seit einigen Jahren verfügbare Softwarelösung MINEA [1] integriert werden. Weitere Informationen stehen auf den Websites des Projektes [2] zur Verfügung. Im vorliegenden Beitrag werden nach einer kurzen thematischen Einführung die Ergebnisse von Tastversuchen an senkrecht zur Ebene belasteten Ausfachungswänden aus Planziegelmauerwerk vorgestellt. Im Anschluss wird das geplante Arbeitsprogramm der deutschen Partner im Projekt INSYSME beschrieben.
Y1  - 2014
U6  - https://doi.org/10.1002/dama.201400612
SN  - 1437-1022 (E-Journal); 1432-3427 (Print)
VL  - 18
IS  - 2
SP  - 78
EP  - 81
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Gellert, Christoph
A1  - Butenweg, Christoph
T1  - Seismic analysis of masonry structures in German earthquake zones according to DIN EN 1998-1
T1  - Erdbebenbemessung von Mauerwerksbauten in deutschen Erdbebengebieten nach DIN EN 1998-1
JF  - Mauerwerk : European journal of masonry
N2  - Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) “Bauten in deutschen Erdbebengebieten – Lastannahmen, Bemessung und Ausführung üblicher Hochbauten“ eingeführt, in der aber für Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau-Arbeitsausschuss “Erdbeben; Sonderfragen“ des Deutschen Instituts für Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollständig überarbeitet und durch die DIN 4149 (2005) abgelöst, die umfangreiche Regelungen für die seismische Auslegung von Mauerwerksbauten enthält. Mittlerweile liegen die DIN EN 1998-1 (2010) und der Nationale Anhang DIN EN 1998-1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgeführten Anwendungserprobung bauaufsichtlich eingeführt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen Überblick über die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europäischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.
Y1  - 2014
U6  - https://doi.org/10.1002/dama.201400626
SN  - 1437-1022 (E-Journal); 1432-3427 (Print)
VL  - 18
IS  - 3-4
SP  - 188
EP  - 196
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Meyer, Udo
A1  - Butenweg, Christoph
A1  - Fehling, Ekkehard
T1  - EU-Projekt INSYSME : innovative Systeme für erdbebentaugliche Ausfachungswände aus Ziegelmauerwerk
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2014
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
VL  - 89 (2014)
IS  - April
SP  - S14
EP  - S15
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Schmitt, Timo
A1  - Rosen, Britta
T1  - Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik
Y1  - 2014
SN  - 0005-6650
VL  - 89 (2014)
IS  - Heft 7/8
SP  - 316
EP  - 324
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Digel, Ilya
A1  - Elibayeva, G.
A1  - Sydykova, A.
A1  - Uspabayeva, A.
A1  - Dosybayeva, G.
A1  - Zhylysbayeva, A.
A1  - Lakhanova, K.
T1  - Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L
JF  - Life science journal
N2  - The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium – F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 % respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.
Y1  - 2014
U6  - https://doi.org/10.7537/marslsj1105s14.33
SN  - 1097-8135
VL  - 11
IS  - Spec. iss. 5s
SP  - 171
EP  - 175
PB  - Marsland Press
CY  - New York
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Renault, Philippe
T1  - Workshop der Gesellschaften zum EU-Projekt SHARE
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2014
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
VL  - 89 (2014)
IS  - Oktober
SP  - S2
EP  - S3
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Lehnertz, Klaus
A1  - Ansmann, Gerrit
A1  - Bialonski, Stephan
A1  - Dickten, Henning
A1  - Geier, Christian
A1  - Porz, Stephan
T1  - Evolving networks in the human epileptic brain
JF  - Physica D: Nonlinear Phenomena
N2  - Network theory provides novel concepts that promise an improved characterization of interacting dynamical systems. Within this framework, evolving networks can be considered as being composed of nodes, representing systems, and of time-varying edges, representing interactions between these systems. This approach is highly attractive to further our understanding of the physiological and pathophysiological dynamics in human brain networks. Indeed, there is growing evidence that the epileptic process can be regarded as a large-scale network phenomenon. We here review methodologies for inferring networks from empirical time series and for a characterization of these evolving networks. We summarize recent findings derived from studies that investigate human epileptic brain networks evolving on timescales ranging from few seconds to weeks. We point to possible pitfalls and open issues, and discuss future perspectives.
Y1  - 2014
U6  - https://doi.org/10.1016/j.physd.2013.06.009
SN  - 0167-2789
VL  - 267
SP  - 7
EP  - 15
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Mansurov, Z. A.
A1  - Jandosov, J. M.
A1  - Kerimkulova, A. R.
A1  - Azat, S.
A1  - Zhubanova, A. A.
A1  - Digel, Ilya
A1  - Savistkaya, I. S.
A1  - Akimbekov, Nuraly S.
A1  - Kistaubaeva, A. S.
T1  - Nanostructured carbon materials for biomedical use
JF  - Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences
N2  - One of the priority trends of carbon nanotechnology is creation of nanocomposite systems. Such carbon nanostructured composites were produced using - raw materials based on the products of agricultural waste, such as grape stones, apricot stones, rice husk. These products have a - wide spectrum of application and can be obtained in large quantities. The Institute of Combustion Problems has carried out the work on synthesis of the nanostructured carbon sorbents for multiple applications including the field of biomedicine. The article presents the data on the synthesis and physico-chemical properties of carbonaceous sorbents using physicochemical methods of investigation: separation and purification of biomolecules; isolation of phytohormone - fusicoccin; adsorbent INGO-1 in the form of an adsorption column for blood detoxification, oral (entero) sorbent - INGO-2; the study of efferent and probiotic properties and sorption activity in regard to the lipopolysaccharide (LPS), new biocomposites - based on carbonized rice husk (CRH) and cellular microorganisms; the use of CRH in wound treatment. A new material for blood detoxication (INGO-1) has been obtained. Adsorption of p-cresyl sulfate and indoxyl sulfate has shown that active carbon adsorbent can remove clinically significant level of p-cresyl sulfate and indoxyl sulfate from human plasma. Enterosorbent INGO-2 possesses high adsorption activity in relation to Gram-negative bacteria and their endotoxins. INGO-2 slows down the growth of conditionally pathogenic microorganisms, without having a negative effect on bifido and lactobacteria. The use of enterosorbent INGO-2 for sorption therapy may provide a solution to a complex problem - detoxication of the digestive tract and normalization of the intestinal micro ecology. The immobilized probiotic called "Riso-lact" was registered at the Ministry of Health of the Republic of Kazakhstan as a biologically active food additive. The developed technology is patented and provides production of the medicine in the form of freeze-dried biomass immobilized in vials.
Y1  - 2014
U6  - https://doi.org/10.18321/ectj224
SN  - 1562-3920
VL  - 15 (2013)
IS  - 3
SP  - 209
EP  - 217
PB  - Institute of Combustion Problems
CY  - Almaty
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Akimbekov, Nuraly S.
A1  - Digel, Ilya
A1  - O´Heras, C.
A1  - Tastambek, K.T.
A1  - Savitskaya, I.S.
A1  - Ualyeva, P.S.
A1  - Mansurov, Z.A.
A1  - Zhubanova, A.A.
T1  - Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments
JF  - Experimental Biology
N2  - The  scope  of  this  study  is  the  measurement  of  endotoxin  adsorption  rate  for  carbonized  rice  husk.  It  showed  good  adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the  material’s  adsorption  behavior.  Also,  with  the  results  obtained  it  was  possible  to  differentiate  the  materials  according to their adsorption capacity and kinetic characteristics.
KW  - surface modification
KW  - adsorption
KW  - carbonized rice husk
KW  - lipopolysaccharide
Y1  - 2014
SN  - 1563-0218
N1  - Original in russischer Sprache
VL  - 60
IS  - 1/2
SP  - 144
EP  - 148
PB  - Al-Farabi Kazakh National University
CY  - Almaty
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Thümmler, Stefan
A1  - Thurn, Laura
T1  - Experimental investigation on selective laser melting of glass
JF  - Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014
Y1  - 2014
U6  - https://doi.org/10.1016/j.phpro.2014.08.118
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
VL  - 56 (2014)
SP  - 357
EP  - 364
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Arinkin, Vladimir
A1  - Digel, Ilya
A1  - Porst, Dariusz
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - Phenotyping date palm varieties via leaflet cross-sectional imaging and artificial neural network application
JF  - BMC bioinformatics
N2  - Background
True date palms (Phoenix dactylifera L.) are impressive trees and have served as an indispensable source of food for mankind in tropical and subtropical countries for centuries. The aim of this study is to differentiate date palm tree varieties by analysing leaflet cross sections with technical/optical methods and artificial neural networks (ANN).

Results
Fluorescence microscopy images of leaflet cross sections have been taken from a set of five date palm tree cultivars (Hewlat al Jouf, Khlas, Nabot Soltan, Shishi, Um Raheem). After features extraction from images, the obtained data have been fed in a multilayer perceptron ANN with backpropagation learning algorithm.

Conclusions
Overall, an accurate result in prediction and differentiation of date palm tree cultivars was achieved with average prediction in tenfold cross-validation is 89.1% and reached 100% in one of the best ANN.
Y1  - 2014
U6  - https://doi.org/10.1186/1471-2105-15-55
SN  - 1471-2105
VL  - 15
IS  - 55
SP  - 1
EP  - 8
ER  -