TY  - CHAP
A1  - Striegan, C.
A1  - Haj Ayed, A.
A1  - Funke, Harald
A1  - Loechle, S.
A1  - Kazari, M.
A1  - Horikawa, A.
A1  - Okada, K.
A1  - Koga, K.
T1  - Numerical combustion and heat transfer simulations and validation for a hydrogen fueled "micromix" test combustor in industrial gas turbine applications
T2  - Proceedings of the ASME Turbo Expo
Y1  - 2017
SN  - 978-079185085-5
U6  - https://doi.org/10.1115/GT2017-64719
N1  - ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017; Charlotte; United States; 26 June 2017 through 30 June 2017
IS  - Volume Part F130041-4B, 2017
ER  - 
TY  - CHAP
A1  - Endress, Tim
A1  - Bragard, Michael
T1  - Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench
T2  - 2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
N2  - This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.
Y1  - 2017
SN  - 978-1-5386-3846-0
U6  - https://doi.org/10.1109/RTUCON.2017.8124775
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Improvements for a robust production in the RoboCup logistics league 2016
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - https://doi.org/10.1007/978-3-319-68792-6_49
SP  - 589
EP  - 600
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Engel, M.
A1  - Thieringer, J.
A1  - Tippkötter, Nils
T1  - Microbial electrosynthesis for sustainable biobutanol production
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 77
EP  - 78
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Hering, T.
A1  - Ulber, Roland
A1  - Tippkötter, Nils
T1  - Development of a screening system for antimicrobial surfaces
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 129
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Möhring, S.
A1  - Wulfhorst, H.
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - Pretreatment strategies for lignocellulosic biomass
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 131
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Capitain, C.
A1  - Hering, T.
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Enzymatic polymerization of lignin model compounds and solubilized lignin in an aqueous ethanol extract
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 151
EP  - 152
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Marco, Heather G.
A1  - Ferrein, Alexander
T1  - AGNES: The African-German Network of Excellence in Science
T2  - Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017
Y1  - 2017
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Schmidt, B. D.
A1  - Enning, Manfred
T1  - Towards inclusion of the freight rail  system in the industrial internet of things - Wagon 4.0
T2  - Stephenson  Conference, London, March 2017
Y1  - 2017
N1  - IMechE Stephenson Conference <2017, London, United Kingdom>
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A System Layout for Cognitive Service Robots
T2  - Cognitive Robot Architectures. Proceedings of EUCognition 2016
Y1  - 2017
SN  - 1613-0073
N1  - CEUR-WS Vol-1855
SP  - 44
EP  - 45
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Moshiri, Amir
A1  - Reich, Alexander
A1  - Gäbel, Markus
T1  - Modelling of the effect of sanding on the wheel-rail adhesion area
T2  - First International Conference on Rail Transportation
Y1  - 2017
N1  - 2017 ICRT;
International Conference on Rail Transportation <1, 2017, Chengdu, China>
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Shahidi, Parham
A1  - Pfaff, Raphael
A1  - Enning, Manfred
T1  - The connected wagon - a concept for the  integration of vehicle side sensors and actors with cyber physical  representation for condition based maintenance
T2  - First International Conference on Rail Transportation
Y1  - 2017
N1  - 2017 ICRT;
International Conference on Rail Transportation <1, 2017, Chengdu, China>
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Tullis, Blake
T1  - Hydraulic Structures - ISHS2018 in Perspective
T2  - 7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May
Y1  - 2018
SN  - 978-0-692-13277-7
U6  - https://doi.org/10.15142/T3WH2B
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Vogel, Jochen
A1  - Schmidt, Daniel
A1  - Bung, Daniel Bernhard
T1  - Three-dimensional flow structure inside the cavity of a non-aerated stepped chute
T2  - 7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May
Y1  - 2018
SN  - 978-0-692-13277-7
U6  - https://doi.org/10.15142/T3GH17
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Serial Hybrid Propulsion Systems
T2  - Luft- und Raumfahrt - Digitalisierung und Vernetzung : Deutscher Luft- und Raumfahrtkongress 2018. 4. - 6. September 2018 - Friedrichshafen
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
T1  - Initial Sizing for a Family of Hybrid-Electric VTOL General Aviation Aircraft
T2  - 67. Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Parallel Hybrid Propulsion Systems
T2  - Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
U6  - https://doi.org/10.25967/480227
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive manufacturing of drainage segments for cooling system of crucible melting furnaces
T2  - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015
Y1  - 2015
U6  - https://doi.org/10.1002/9781119211662.ch14
SN  - 0196-6219
SP  - 123
EP  - 131
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - https://doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Ulmer, Jessica
A1  - Braun, Sebastian
A1  - Lai, Chow Yin
A1  - Cheng, Chi-Tsun
A1  - Wollert, Jörg
T1  - Generic integration of VR and AR in product lifecycles based on CAD models
T2  - Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - https://doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft
T2  - AIAA Scitech 2019 Forum
Y1  - 2019
U6  - https://doi.org/10.2514/6.2019-1812
N1  - AIAA Scitech Forum, 2019; San Diego; United States; 7 January 2019 through 11 January 2019
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - https://doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Waldmann, Christoph
A1  - Vera, Jean-Pierre de
A1  - Dachwald, Bernd
A1  - Strasdeit, Henry
A1  - Sohl, Frank
A1  - Hanff, Hendrik
A1  - Kowalski, Julia
A1  - Heinen, Dirk
A1  - Macht, Sabine
A1  - Bestmann, Ulf
A1  - Meckel, Sebastian
A1  - Hildebrandt, Marc
A1  - Funke, Oliver
A1  - Gehrt, Jan-Jöran
T1  - Search for life in ice-covered oceans and lakes beyond Earth
T2  - 2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761
N2  - The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.
KW  - Planetary exploration
KW  - Jupiter
KW  - ice moons
KW  - underwater vehicle
KW  - Antarctica
Y1  - 2018
U6  - https://doi.org/10.1109/AUV.2018.8729761
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Understanding the acceptance of smart home-based insurances
T2  - Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm & Uppsala, Sweden, June 8-14, 2019
Y1  - 2019
SN  - 978-1-7336325-0-8
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Hoeveler, Bastian
A1  - Janser, Frank
T1  - The aerodynamically optimized design of a fan-in-wing duct
T2  - Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016
Y1  - 2016
SN  - 1-85768-371-4
N1  - G1-3-paper.pdf
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Wlademar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron D.
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Meß, Jan-Gerd
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Toth, Norbert
A1  - Ceriotti, Matteo
A1  - McInnes, Colin
A1  - Peloni, Alessandro
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Dachwald, Bernd
A1  - Hercik, David
A1  - Lichtenheldt, Roy
A1  - Wolff, Friederike
A1  - Koncz, Alexander
A1  - Pelivan, Ivanka
A1  - Schmitz, Nicole
A1  - Boden, Ralf
A1  - Riemann, Johannes
A1  - Seboldt, Wolfgang
A1  - Wejmo, Elisabet
A1  - Ziach, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Ruffer, Michael
A1  - Cordero, Federico
A1  - Tardivel, Simon
T1  - Solar sails for planetary defense & high-energy missions
T2  - IEEE Aerospace Conference Proceedings
N2  - 20 years after the successful ground deployment test of a (20 m) 2 solar sail at DLR Cologne, and in the light of the upcoming U.S. NEAscout mission, we provide an overview of the progress made since in our mission and hardware design studies as well as the hardware built in the course of our solar sail technology development. We outline the most likely and most efficient routes to develop solar sails for useful missions in science and applications, based on our developed `now-term' and near-term hardware as well as the many practical and managerial lessons learned from the DLR-ESTEC Gossamer Roadmap. Mission types directly applicable to planetary defense include single and Multiple NEA Rendezvous ((M)NR) for precursor, monitoring and follow-up scenarios as well as sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation. Other mission types such as the Displaced L1 (DL1) space weather advance warning and monitoring or Solar Polar Orbiter (SPO) types demonstrate the capability of near-term solar sails to achieve asteroid rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. Some of these mission types such as SPO, (M)NR and RKI include separable payloads. For one-way access to the asteroid surface, nanolanders like MASCOT are an ideal match for solar sails in micro-spacecraft format, i.e. in launch configurations compatible with ESPA and ASAP secondary payload platforms. Larger landers similar to the JAXA-DLR study of a Jupiter Trojan asteroid lander for the OKEANOS mission can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. The high impact velocities and re-try capability achieved by the RKI mission type on a final orbit identical to the target asteroid's but retrograde to its motion enables small spacecraft size impactors to carry sufficient kinetic energy for deflection.
Y1  - 2019
U6  - https://doi.org/10.1109/AERO.2019.8741900
N1  - AERO 2019; Big Sky; United States; 2 March 2019 through 9 March 2019
SP  - 1
EP  - 21
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Galdi, Chiara
A1  - Hartung, Frank
A1  - Dugelay, Jean-Luc
T1  - Socrates: A database of realistic data for source camera recognition on smartphones
T2  - Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM
Y1  - 2019
SN  - 978-989-758-351-3
U6  - https://doi.org/10.5220/0007403706480655
SP  - 648
EP  - 655
ER  - 
TY  - CHAP
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Flesch, Robert
A1  - Alexopoulos, Spiros
A1  - Herrmann, Ulf
T1  - Improved efficiency prediction of a molten salt receiver based on dynamic cloud passage simulation
T2  - AIP Conference Proceedings
Y1  - 2019
SN  - 978-0-7354-1866-0
U6  - https://doi.org/10.1063/1.5117566
VL  - 2126
IS  - 1
SP  - 030054-1
EP  - 030054-8
ER  - 
TY  - CHAP
A1  - Bosse, Elke
A1  - De Clercq, Mikael
A1  - Barnat, Miriam
T1  - The Role of Diversity for the Transition to Higher Education
T2  - EARLI SIG 4, Giessen
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Hunker, Jan
A1  - Jung, Alexander
A1  - Goßmann, Matthias
A1  - Linder, Peter
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Development of a tool to analyze the conduction speed in microelectrode array measurements of cardiac tissue
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - The discovery of human induced pluripotent stem cells reprogrammed from somatic cells [1] and their ability to differentiate into cardiomyocytes (hiPSC-CMs) has provided a robust platform for drug screening [2]. Drug screenings are essential in the development of new components, particularly for evaluating the potential of drugs to induce life-threatening pro-arrhythmias. Between 1988 and 2009, 14 drugs have been removed from the market for this reason [3]. The microelectrode array (MEA) technique is a robust tool for drug screening as it detects the field potentials (FPs) for the entire cell culture. Furthermore, the propagation of the field potential can be examined on an electrode basis. To analyze MEA measurements in detail, we have developed an open-source tool.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 7
EP  - 8
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Raman, Aravind Hariharan
A1  - Jung, Alexander
A1  - Horváth, András
A1  - Becker, Nadine
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Modification of a computer model of human stem cell-derived cardiomyocyte electrophysiology based on Patch-Clamp measurements
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Human induced pluripotent stem cells (hiPSCs) have shown to be promising in disease studies and drug screenings [1]. Cardiomyocytes derived from hiPSCs have been extensively investigated using patch-clamping and optical methods to compare their electromechanical behaviour relative to fully matured adult cells. Mathematical models can be used for translating findings on hiPSCCMs to adult cells [2] or to better understand the mechanisms of various ion channels when a drug is applied [3,4]. Paci et al. (2013) [3] developed the first model of hiPSC-CMs, which they later refined based on new data [3]. The model is based on iCells® (Fujifilm Cellular Dynamics, Inc. (FCDI), Madison WI, USA) but major differences among several cell lines and even within a single cell line have been found and motivate an approach for creating sample-specific models. We have developed an optimisation algorithm that parameterises the conductances (in S/F=Siemens/Farad) of the latest Paci et al. model (2018) [5] using current-voltage data obtained in individual patch-clamp experiments derived from an automated patch clamp system (Patchliner, Nanion Technologies GmbH, Munich).
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 10
EP  - 11
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Hoffmann, Katharina
A1  - Nieren, Monika
A1  - Gäb, Martina
A1  - Kasper, Anna
A1  - Elbers, Gereon
T1  - The potential of near infrared spectroscopy (NIRS) for the environmental biomonitoring of plants
T2  - International conference on Life Sciences and Technology
N2  - In the current environmental condition, the increase in pollution of the air, water, and soil indirectly will induce plants stress and decrease vegetation growth rate. These issues pay more attention to be solved by scientists worldwide. The higher level of chemical pollutants also induced the gradual changes in plants metabolism and decreased enzymatic activity. Importantly, environmental biomonitoring may play a pivotal contribution to prevent biodiversity degradation and plants stress due to pollutant exposure. Several previous studies have been done to monitor the effect of environmental changes on plants growth. Among that, Near Infrared spectroscopy (NIRS) offers an alternative way to observe the significant alteration of plant physiology caused by environmental damage related to pollution. Impairment of photosynthesis, nutrient and oxidative imbalances, and mutagenesis.
Y1  - 2019
U6  - https://doi.org/10.1088/1755-1315/276/1/012009
SN  - 1755-1315
N1  - IOP Conference Series: Earth and Environmental Science : 276
VL  - 276
IS  - 012009
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
A1  - Neumann, Tobias
A1  - Krückel, Kai
A1  - Schiffer, Stefan
T1  - A system for continuous underground site mapping and exploration
Y1  - 2019
U6  - https://doi.org/10.5772/intechopen.85859
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Bharatheesha, Mukunda
A1  - Schiffer, Stefan
A1  - Corbato, Carlos Hernandez
T1  - TRROS 2018 :  Teaching Robotics with ROS Workshop at ERF 2018;  Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018
T2  - CEUR Workshop Proceedings
Y1  - 2019
SN  - 1613-0073
IS  - Vol-2329
ER  - 
TY  - CHAP
A1  - Bayer, Robin
A1  - Hescheler, Jürgen
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Treating arterial hypertension in a cell culture well
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW
N2  - Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the “Deutsche Bluthochdruck Liga” this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model.
In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology.
Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 5
EP  - 6
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Azar, Fouad
A1  - Digel, Ilya
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Utilization of fluorescence spectroscopy and neural networks in clinical analysis
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 40
EP  - 41
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Zingsheim, Jonas
A1  - Grimmer, Timo
A1  - Ortner, Marion
A1  - Schmaderer, Christoph
A1  - Hauser, Christine
A1  - Kotliar, Konstantin
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Recognition of subjects with mild cognitive impairment (MCI) by the use of retinal arterial vessels.
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 36
EP  - 37
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Blum, Yannik
A1  - Albanna, Walid
A1  - Benninghaus, Anne
A1  - Kotliar, Konstantin
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Vasomotion in retinal vessels of patients presenting post hemorrhagic hydrocephalus following subarachnoid hemorrhage
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Clearance of blood components and fluid drainage play a crucial role in subarachnoid hemorrhage (SAH) and post hemorrhagic hydrocephalus (PHH). With the involvement of interstitial fluid (ISF) and cerebrospinal fluid (CSF), two pathways for the clearance of fluid and solutes in the brain are proposed. Starting at the level of capillaries, flow of ISF follows along the basement membranes in the walls of cerebral arteries out of the parenchyma to drain into the lymphatics and CSF [1]–[3]. Conversely, it is shown that CSF enters the parenchyma between glial and pial basement membranes of penetrating arteries [4]–[6]. Nevertheless, the involved structures and the contribution of either flow pathway to fluid balance between the subarachnoid space and interstitial space remains controversial. Low frequency oscillations in vascular tone are referred to as vasomotion and corresponding vasomotion waves are modeled as the driving force for flow of ISF out of the parenchyma [7]. Retinal vessel analysis (RVA) allows non-invasive measurement of retinal vessel vasomotion with respect to diameter changes [8]. Thus, the aim of the study is to investigate vasomotion in RVA signals of SAH and PHH patients.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 38
EP  - 39
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Siebigteroth, Ines
A1  - Kraft, Bodo
A1  - Schmidts, Oliver
A1  - Zündorf, Albert
T1  - A Study on Improving Corpus Creation by Pair Annotation
T2  - Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)
Y1  - 2019
SN  - 1613-0073
SP  - 40
EP  - 44
ER  - 
TY  - CHAP
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - CogRob 2018 : 
Cognitive Robotics Workshop.
Proceedings of the 11th Cognitive Robotics Workshop 2018
co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018).
Tempe, AZ, USA, October 27th, 2018.
T2  - CEUR workshop proceedings
Y1  - 2019
SN  - 1613-0073
N1  - edited by Gerald Steinbauer, Alexander Ferrein
IS  - Vol-2325
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - https://doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Sube, Maike
A1  - Schneider, Maike
A1  - Jungemann, Christoph
T1  - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - https://doi.org/10.1109/REM.2019.8744132
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmidt, M.
A1  - Weber, Tobias
T1  - Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations
T2  - SAMPE Europe Conference 16 Liege
Y1  - 2016
SN  - 978-1-5108-3800-0
SP  - 570
EP  - 577
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  -